Initial commit

target/linux/ixp4xx/base-files/etc/board.d/02_network

@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0-only
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+freecom,fsg-3|\
+gateworks,gw2348|\
+gateworks,gw2358)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	;;
+dlink,dsm-g600-a|\
+iom,nas-100d|\
+linksys,nslu2)
+	ucidef_set_interface_lan "eth0" "dhcp"
+	;;
+usr,usr8200)
+	# LAN ports connected to eth1 thru the MV88E6060 DSA switch
+	ucidef_set_interface "eth" device "eth1" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
+	;;
+*)
+	ucidef_set_interface_lan "eth0" "dhcp"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx

@@ -0,0 +1,38 @@
+#!/bin/sh
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+set_from_redboot () {
+	for npe in eth0 eth1 eth2
+	do
+		if ip link show dev $npe > /dev/null 2>&1; then
+			ip link set dev $npe address $(fconfig -s -r -d /dev/$1 -n npe_"$npe"_esa)
+		fi
+	done
+
+	# Devices with MAC address set blank: set a dummy value.
+	if [ "$(ip link show dev eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
+		ip link set dev eth0 address 00:11:22:33:44:55
+	fi
+	if [ "$(ip link show dev eth1 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
+		ip link set dev eth0 address 00:11:22:33:44:56
+	fi
+}
+
+set_from_sysconf () {
+	ip link set dev eth0 address $(mtd_get_mac_ascii SysConf hw_addr)
+}
+
+set_ether_mac () {
+	RBC="$(grep "RedBoot config" /proc/mtd | cut -d: -f1)"
+	if [ ! -z $RBC ] ; then
+		set_from_redboot $RBC
+	else
+		SYSC="$(grep "SysConf" /proc/mtd | cut -d: -f1)"
+		if [ ! -z $SYSC ] ; then
+			set_from_sysconf
+		fi
+	fi
+}
+
+boot_hook_add preinit_main set_ether_mac