Initial commit

target/linux/kirkwood/base-files/etc/board.d/01_leds

@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2012-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+iom,ix2-200)
+	ucidef_set_led_timer "health" "health" "status:white:rebuild_led" "200" "800"
+	;;
+linksys,e4200-v2|\
+linksys,ea4500)
+	ucidef_set_led_default "pulse" "pulse" "viper:white:pulse" "1"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/kirkwood/base-files/etc/board.d/02_network

@@ -0,0 +1,93 @@
+#
+# Copyright (C) 2012-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+kirkwood_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	checkpoint,l-50)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 dmz" "eth0"
+		;;
+	cisco,on100)
+		ucidef_set_interface_lan "eth0 eth1"
+		;;
+	cloudengines,pogoe02|\
+	cloudengines,pogoplugv4|\
+	ctera,c200-v1|\
+	dlink,dns320l|\
+	globalscale,sheevaplug|\
+	iom,iconnect-1.1|\
+	iom,ix2-200|\
+	iptime,nas1|\
+	netgear,readynas-duo-v2|\
+	netgear,stora|\
+	raidsonic,ib-nas62x0|\
+	seagate,blackarmor-nas220|\
+	seagate,dockstar|\
+	seagate,goflexhome|\
+	seagate,goflexnet|\
+	zyxel,nsa310b|\
+	zyxel,nsa310s|\
+	zyxel,nsa325)
+		ucidef_set_interface_lan "eth0" "dhcp"
+		;;
+	endian,4i-edge-200)
+		ucidef_set_interface_lan "port1 port2 port3 port4 eth1"
+		;;
+	iom,ix4-200d)
+		ucidef_set_interface_lan "eth0 eth1" "dhcp"
+		;;
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
+		ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet"
+		;;
+	*)
+		ucidef_set_interface_lan "eth0"
+		;;
+	esac
+}
+
+kirkwood_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case "$board" in
+	dlink,dns320l)
+		lan_mac=$(mtd_get_mac_text "mini firmware")
+		;;
+	iptime,nas1)
+		lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
+		label_mac=$lan_mac
+		;;
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
+		wan_mac=$(mtd_get_mac_ascii u_env eth1addr)
+		;;
+	zyxel,nsa310b|\
+	zyxel,nsa325)
+		lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+kirkwood_setup_interfaces $board
+kirkwood_setup_macs $board
+board_config_flush
+
+exit 0

target/linux/kirkwood/base-files/etc/board.d/03_gpio_switches

@@ -0,0 +1,17 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+checkpoint,l-50)
+	ucidef_add_gpio_switch "mpcie-rst" "mPCIE Card reset" "502" "1"
+	ucidef_add_gpio_switch "exp-card-rst" "Express Card reset" "497" "1"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/kirkwood/base-files/etc/board.d/05_compat-version

@@ -0,0 +1,24 @@
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	iom,ix2-200|\
+	iom,ix4-200d)
+		ucidef_set_compat_version "2.0"
+		;;
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
+		ucidef_set_compat_version "3.0"
+		;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/kirkwood/base-files/etc/init.d/bootcount

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	case $(board_name) in
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
+		mtd resetbc s_env || true
+		;;
+	esac
+}

target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol

@@ -0,0 +1,59 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+
+boot() {
+	# configuring onboard temp/fan controller to run the fan on its own
+	# for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
+
+	case $(board_name) in
+	ctera,c200-v1)
+		path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-004c/hwmon/hwmon0'
+
+		# It should be related to hdd temerature instead lm63 temp
+		echo 1 > "$path_to_hwmon/pwm1_enable"
+		echo 128 > "$path_to_hwmon/pwm1"
+		;;
+	iom,ix2-200)
+		path_to_hwmon='/sys/class/hwmon/hwmon0'
+		echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
+		;;
+	netgear,readynas-duo-v2)
+		path_to_hwmon='/sys/class/hwmon/hwmon0'
+		echo 1200 > "$path_to_hwmon/fan1_target" # set target rpm
+		;;
+	seagate,blackarmor-nas220)
+		path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
+		# adt7476 fan control chip. 3 temp sensors. Set to 1/4 speed at 35C and max speed at 48C.
+		echo 7 > "$path_to_hwmon/pwm1_auto_channels_temp"
+		echo 64 > "$path_to_hwmon/pwm1_auto_point1_pwm"
+		echo 255 > "$path_to_hwmon/pwm1_auto_point2_pwm"
+		echo 35000 > "$path_to_hwmon/temp1_auto_point1_temp"
+		echo 48000 > "$path_to_hwmon/temp1_auto_point2_temp"
+		echo 35000 > "$path_to_hwmon/temp2_auto_point1_temp"
+		echo 48000 > "$path_to_hwmon/temp2_auto_point2_temp"
+		echo 35000 > "$path_to_hwmon/temp3_auto_point1_temp"
+		echo 48000 > "$path_to_hwmon/temp3_auto_point2_temp"
+		echo 2 > "$path_to_hwmon/pwm1_enable"
+		;;
+	zyxel,nsa310b)
+		path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
+		# use the max. value of (temp1) OR (temp2) OR (temp3) as an input
+		# for the PWM of the cooling fan
+		echo 123 > "$path_to_hwmon/pwm1_auto_channels"
+		# Temperature sensor #1 placed on mainboard
+		echo 30000 > "$path_to_hwmon/temp1_auto_temp_min"
+		echo 49600 > "$path_to_hwmon/temp1_auto_temp_max"
+		# Temperature sensor #2 placed on mainboard
+		# range: 0 to 127000 in steps of 1000 [millicelsius]
+		echo 30000 > "$path_to_hwmon/temp2_auto_temp_min"
+		# range: 0 to 127000 in steps of ???? [millicelsius]
+		echo 49600 > "$path_to_hwmon/temp2_auto_temp_max"
+		# Temperature sensor #3 placed close to a chipset
+		# range: 0 to 60000 in steps of 1000 [millicelsius]
+		echo 23000 > "$path_to_hwmon/temp3_auto_temp_min"
+		# pre-defined steps: 103000, 122000, 143300, 170000 in [millicelsius]
+		echo 103000 > "$path_to_hwmon/temp3_auto_temp_max"
+		;;
+	esac
+}

target/linux/kirkwood/base-files/etc/uci-defaults/04_storafan

@@ -0,0 +1,22 @@
+#
+# Copyright (C) 2021 OpenWrt.org
+#
+
+. /lib/functions.sh
+
+board=$(board_name)
+
+case "$board" in
+netgear,stora)
+	# Set fan script execution in crontab
+	grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0
+
+	echo "# stora fan script runs every 5 minutes" >> /etc/crontabs/root
+	echo "*/5 * * * * /sbin/fan_ctrl.sh" >> /etc/crontabs/root
+
+	# Execute one time after initial flash (instead of waiting 5 min for cron)
+	/sbin/fan_ctrl.sh
+	;;
+esac
+
+exit 0

target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac

@@ -0,0 +1,37 @@
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+preinit_set_mac_address() {
+	local mac
+
+	case $(board_name) in
+	checkpoint,l-50)
+		mac=$(mtd_get_mac_ascii bootldr-env lan1_mac_addr)
+
+		ip link set dev lan1 address $mac 2>/dev/null
+		ip link set dev lan2 address $(macaddr_add $mac 1) 2>/dev/null
+		ip link set dev lan3 address $(macaddr_add $mac 2) 2>/dev/null
+		ip link set dev lan4 address $(macaddr_add $mac 3) 2>/dev/null
+		ip link set dev lan5 address $(macaddr_add $mac 4) 2>/dev/null
+		ip link set dev lan6 address $(macaddr_add $mac 5) 2>/dev/null
+		ip link set dev lan7 address $(macaddr_add $mac 6) 2>/dev/null
+		ip link set dev lan8 address $(macaddr_add $mac 7) 2>/dev/null
+		ip link set dev dmz address $(macaddr_add $mac 8) 2>/dev/null
+		ip link set dev dsl address $(macaddr_add $mac 9) 2>/dev/null
+		;;
+	endian,4i-edge-200)
+		mac=$(cat /sys/class/net/eth0/address)
+
+		ip link set dev port1 address $mac 2>/dev/null
+		ip link set dev port2 address $(macaddr_add $mac 1) 2>/dev/null
+		ip link set dev port3 address $(macaddr_add $mac 2) 2>/dev/null
+		ip link set dev port4 address $(macaddr_add $mac 3) 2>/dev/null
+		;;
+	iptime,nas1)
+		mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
+		ip link set dev eth0 address $mac 2>/dev/null
+		;;
+	esac
+}
+
+boot_hook_add preinit_main preinit_set_mac_address

target/linux/kirkwood/base-files/lib/upgrade/linksys.sh

@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+
+linksys_get_target_firmware() {
+
+	local cur_boot_part mtd_ubi0
+
+	cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
+	if [ -z "${cur_boot_part}" ] ; then
+		mtd_ubi0=$(cat /sys/class/ubi/ubi0/mtd_num)
+		case $(grep -E ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
+		kernel|rootfs)
+			cur_boot_part=1
+			;;
+		alt_kernel|alt_rootfs)
+			cur_boot_part=2
+			;;
+		esac
+		>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+			"${cur_boot_part}" "${mtd_ubi0}"
+	fi
+
+	case $cur_boot_part in
+	1)
+		fw_setenv -s - <<-EOF
+			boot_part 2
+			bootcmd "run altnandboot"
+		EOF
+		printf "kernel2"
+		return
+		;;
+	2)
+		fw_setenv -s - <<-EOF
+			boot_part 1
+			bootcmd "run nandboot"
+		EOF
+		printf "kernel1"
+		return
+		;;
+	*)
+		return
+		;;
+	esac
+}
+
+platform_do_upgrade_linksys() {
+	local magic_long="$(get_magic_long "$1")"
+
+	mkdir -p /var/lock
+	local part_label="$(linksys_get_target_firmware)"
+	touch /var/lock/fw_printenv.lock
+
+	if [ ! -n "$part_label" ]
+	then
+		echo "cannot find target partition"
+		exit 1
+	fi
+
+	local target_mtd=$(find_mtd_part $part_label)
+
+	[ "$magic_long" = "73797375" ] && {
+		CI_KERNPART="$part_label"
+		if [ "$part_label" = "kernel1" ]
+		then
+			CI_UBIPART="rootfs1"
+		else
+			CI_UBIPART="rootfs2"
+		fi
+
+		if nand_upgrade_tar "$1" ; then
+			nand_do_upgrade_success
+		else
+			nand_do_upgrade_failed
+		fi
+
+	}
+	[ "$magic_long" = "27051956" ] && {
+		get_image "$1" | mtd write - $part_label
+	}
+}

target/linux/kirkwood/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,49 @@
+RAMFS_COPY_BIN='fw_printenv fw_setenv strings'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	local board="$(board_name)"
+
+	case "$board" in
+	netgear,readynas-duo-v2)
+		# let's store how rootfs is mounted
+		cp /proc/mounts /tmp/mounts
+		return 0
+		;;
+	*)
+		return 0
+		;;
+	esac
+}
+
+platform_do_upgrade() {
+	local board="$(board_name)"
+
+	case "$board" in
+	ctera,c200-v1)
+		part=$(find_mtd_part "active_bank")
+
+		if [ -n "$part" ]; then
+			CI_KERNPART="$(strings $part | grep bank)"
+			nand_do_upgrade "$1"
+		else
+			echo "active_bank partition missed!"
+			return 1
+		fi
+		;;
+	iptime,nas1)
+		default_do_upgrade "$1"
+		;;
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
+		platform_do_upgrade_linksys "$1"
+		;;
+	*)
+		nand_do_upgrade "$1"
+		;;
+	esac
+}

target/linux/kirkwood/base-files/sbin/ctera_c200-v1_back_to_factory

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+case $(board_name) in
+ctera,c200-v1)
+	part=$(find_mtd_part "active_bank")
+
+	if [ -n "$part" ]; then
+		active_bank="$(strings $part | grep bank)"
+
+		if [ $active_bank = "bank1" ]; then
+			echo "bank2" > /tmp/change_bank
+		else
+			echo "bank1" > /tmp/change_bank
+		fi
+
+		mtd write /tmp/change_bank active_bank
+		reboot
+	else
+		echo "active_bank partition missed!"
+		return 1
+	fi
+	;;
+*)
+	echo "Unsupported hardware."
+	;;
+esac

target/linux/kirkwood/base-files/sbin/fan_ctrl.sh

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+CPU_TEMP=$(cut -c1-2 /sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-0048/hwmon/hwmon?/temp1_input)
+
+CPU_LOW=45
+CPU_MID=50
+CPU_HIGH=55
+
+if [ ! -e /sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-001b/hwmon/hwmon?/pwm1 ]; then
+	exit 0
+else
+	FAN_CTRL=$(ls /sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-001b/hwmon/hwmon?/pwm1)
+fi
+
+if [ "$CPU_TEMP" -ge "$CPU_HIGH" ]; then
+	echo "255" > $FAN_CTRL
+elif [ "$CPU_TEMP" -ge "$CPU_MID" ]; then
+	echo "100" > $FAN_CTRL
+elif [ "$CPU_TEMP" -ge "$CPU_LOW" ]; then
+	echo "50" > $FAN_CTRL
+else
+	echo "0" > $FAN_CTRL
+fi