Initial commit
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
This commit is contained in:
domenico
74
target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
Normal file
74
target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
Normal file
@@ -0,0 +1,74 @@
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
led_wifi="$(get_dt_led wifi)"
|
||||
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
|
||||
|
||||
led_dsl="$(get_dt_led dsl)"
|
||||
[ -n "$led_dsl" ] && {
|
||||
led_internet="$(get_dt_led internet)"
|
||||
if [ -n "$led_internet" ]; then
|
||||
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
|
||||
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
|
||||
else
|
||||
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
|
||||
fi
|
||||
}
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv7519rw22)
|
||||
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0.1"
|
||||
;;
|
||||
arcadyan,vgv7510kw22-nor|\
|
||||
arcadyan,vgv7510kw22-brn)
|
||||
ucidef_set_led_netdev "internet" "internet" "$led_internet" "wan"
|
||||
;;
|
||||
arcadyan,vrv9510kwac23)
|
||||
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
|
||||
ucidef_set_led_wlan "wifi" "wifi" "green:wlan" "phy1radio"
|
||||
;;
|
||||
zyxel,p-2812hnu-f1|\
|
||||
zyxel,p-2812hnu-f3)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "green:wlan" "phy0radio"
|
||||
;;
|
||||
arcadyan,vgv7519-nor|\
|
||||
arcadyan,vgv7519-brn)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "green:wireless" "phy0radio"
|
||||
;;
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz3390|\
|
||||
avm,fritz3490|\
|
||||
avm,fritz3490-micron|\
|
||||
avm,fritz5490|\
|
||||
avm,fritz5490-micron|\
|
||||
avm,fritz7490|\
|
||||
avm,fritz7490-micron)
|
||||
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x17"
|
||||
;;
|
||||
bt,homehub-v5a)
|
||||
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
|
||||
;;
|
||||
buffalo,wbmr-300hpd)
|
||||
ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x04"
|
||||
ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x20"
|
||||
ucidef_set_led_default "router" "router" "green:router" "1"
|
||||
;;
|
||||
netgear,dm200)
|
||||
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
180
target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
Normal file
180
target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
Normal file
@@ -0,0 +1,180 @@
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
lantiq_setup_interfaces()
|
||||
{
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
alphanetworks,asl56026|\
|
||||
arcadyan,vg3503j)
|
||||
ucidef_set_interface_lan "lan1 lan2"
|
||||
;;
|
||||
arcadyan,arv7519rw22)
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
|
||||
;;
|
||||
avm,fritz5490|\
|
||||
avm,fritz5490-micron)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
|
||||
;;
|
||||
arcadyan,vgv7510kw22-brn|\
|
||||
arcadyan,vgv7510kw22-nor|\
|
||||
arcadyan,vgv7519-brn|\
|
||||
arcadyan,vgv7519-nor|\
|
||||
arcadyan,vrv9510kwac23|\
|
||||
bt,homehub-v5a|\
|
||||
lantiq,easy80920-nand|\
|
||||
lantiq,easy80920-nor|\
|
||||
zyxel,p-2812hnu-f1|\
|
||||
zyxel,p-2812hnu-f3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz3390|\
|
||||
avm,fritz3490|\
|
||||
avm,fritz3490-micron|\
|
||||
avm,fritz7360sl|\
|
||||
avm,fritz7360-v2|\
|
||||
avm,fritz7362sl|\
|
||||
avm,fritz7430|\
|
||||
avm,fritz7490|\
|
||||
avm,fritz7490-micron|\
|
||||
buffalo,wbmr-300hpd|\
|
||||
tplink,tdw8970|\
|
||||
tplink,tdw8980|\
|
||||
tplink,vr200|\
|
||||
tplink,vr200v)
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
|
||||
;;
|
||||
avm,fritz7412|\
|
||||
netgear,dm200)
|
||||
ucidef_set_interface_lan "lan"
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
lantiq_setup_dsl()
|
||||
{
|
||||
local board="$1"
|
||||
local annex="a"
|
||||
|
||||
case "$board" in
|
||||
arcadyan,vgv7510kw22-brn|\
|
||||
arcadyan,vgv7510kw22-nor|\
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz3390|\
|
||||
avm,fritz3490|\
|
||||
avm,fritz3490-micron|\
|
||||
avm,fritz7360sl|\
|
||||
avm,fritz7362sl|\
|
||||
avm,fritz7412|\
|
||||
avm,fritz7430|\
|
||||
avm,fritz7490|\
|
||||
avm,fritz7490-micron)
|
||||
annex="b"
|
||||
;;
|
||||
esac
|
||||
|
||||
lantiq_setup_dsl_helper "$annex"
|
||||
}
|
||||
|
||||
lantiq_setup_macs()
|
||||
{
|
||||
local board="$1"
|
||||
local lan_mac=""
|
||||
local wan_mac=""
|
||||
|
||||
case "$board" in
|
||||
alphanetworks,asl56026)
|
||||
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
wan_mac=$(mtd_get_mac_ascii u-boot-env wanmac)
|
||||
;;
|
||||
arcadyan,arv7519rw22)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
|
||||
;;
|
||||
arcadyan,vg3503j|\
|
||||
lantiq,easy80920-nand|\
|
||||
lantiq,easy80920-nor|\
|
||||
zyxel,p-2812hnu-f1|\
|
||||
zyxel,p-2812hnu-f3)
|
||||
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
;;
|
||||
arcadyan,vgv7510kw22-brn|\
|
||||
arcadyan,vgv7510kw22-nor)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
|
||||
;;
|
||||
arcadyan,vgv7519-brn|\
|
||||
arcadyan,vgv7519-nor|\
|
||||
arcadyan,vrv9510kwac23)
|
||||
wan_mac=$(mtd_get_mac_binary board_config 0x16)
|
||||
;;
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron)
|
||||
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
|
||||
wan_mac=$(macaddr_add "$lan_mac" 3)
|
||||
;;
|
||||
avm,fritz7360sl)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
|
||||
;;
|
||||
avm,fritz3390|\
|
||||
avm,fritz3490|\
|
||||
avm,fritz3490-micron|\
|
||||
avm,fritz5490|\
|
||||
avm,fritz5490-micron|\
|
||||
avm,fritz7362sl|\
|
||||
avm,fritz7490|\
|
||||
avm,fritz7490-micron)
|
||||
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
|
||||
wan_mac=$(fritz_tffs -n macdsl -i $(find_mtd_part "tffs (1)"))
|
||||
;;
|
||||
avm,fritz7412|\
|
||||
avm,fritz7430)
|
||||
tffsdev=$(find_mtd_chardev "nand-tffs")
|
||||
lan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n maca -o)
|
||||
wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl -o)
|
||||
;;
|
||||
bt,homehub-v5a)
|
||||
lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
;;
|
||||
buffalo,wbmr-300hpd)
|
||||
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
wan_mac="$lan_mac"
|
||||
;;
|
||||
netgear,dm200)
|
||||
lan_mac=$(mtd_get_mac_binary ART 0x0)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
;;
|
||||
tplink,tdw8970|\
|
||||
tplink,tdw8980)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
|
||||
;;
|
||||
tplink,vr200|\
|
||||
tplink,vr200v)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)
|
||||
;;
|
||||
esac
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
}
|
||||
|
||||
board_config_update
|
||||
board=$(board_name)
|
||||
lantiq_setup_interfaces $board
|
||||
lantiq_setup_dsl $board
|
||||
lantiq_setup_macs $board
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,18 @@
|
||||
#
|
||||
# Copyright (C) 2020 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
*)
|
||||
ucidef_set_compat_version "1.1"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,20 @@
|
||||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:02:00.0.bin")
|
||||
board=$(board_name)
|
||||
case $board in
|
||||
bt,homehub-v5a)
|
||||
caldata_extract_ubi "caldata" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) 3)
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
@@ -0,0 +1,43 @@
|
||||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
|
||||
"ath9k-eeprom-pci-0000:01:00.0.bin" | \
|
||||
"ath9k-eeprom-pci-0000:02:00.0.bin")
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz7362sl)
|
||||
caldata_extract_reverse "urlader" 0x1541 0x440
|
||||
;;
|
||||
avm,fritz3390)
|
||||
caldata_extract_reverse "urlader" 0x2546 0x440
|
||||
;;
|
||||
avm,fritz7360sl)
|
||||
caldata_extract "urlader" 0x985 0x1000
|
||||
;;
|
||||
avm,fritz7412|\
|
||||
avm,fritz7430)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 5120 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x1e800 -e 0x207 -l 5120 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
|
||||
;;
|
||||
bt,homehub-v5a)
|
||||
caldata_extract_ubi "caldata" 0x1000 0x1000
|
||||
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) 2) 0x10c
|
||||
;;
|
||||
tplink,tdw8970|\
|
||||
tplink,tdw8980)
|
||||
caldata_extract "boardconfig" 0x21000 0x1000
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
@@ -0,0 +1,34 @@
|
||||
#
|
||||
# Copyright (C) 2013 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/migrations.sh
|
||||
|
||||
do_internet_led_rename()
|
||||
{
|
||||
config_load system
|
||||
|
||||
[ -n $(config_get led_internet name) ] || return
|
||||
[ -z $(config_get led_dsl name) ] || return
|
||||
|
||||
uci rename system.led_internet=led_dsl
|
||||
uci set system.led_dsl.name=dsl
|
||||
|
||||
logger -t led-migration "internet led renamed to dsl"
|
||||
}
|
||||
|
||||
case "$(board_name)" in
|
||||
alphanetworks,asl56026|\
|
||||
arcadyan,arv7519rw22|\
|
||||
arcadyan,vg3503j|\
|
||||
avm,fritz7360sl|\
|
||||
bt,homehub-v5a)
|
||||
do_internet_led_rename
|
||||
;;
|
||||
esac
|
||||
|
||||
remove_devicename_leds
|
||||
|
||||
migrations_apply system
|
||||
|
||||
exit 0
|
||||
34
target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh
Executable file
34
target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh
Executable file
@@ -0,0 +1,34 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,vrv9510kwac23|\
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz3390|\
|
||||
avm,fritz3490|\
|
||||
avm,fritz3490-micron|\
|
||||
avm,fritz5490|\
|
||||
avm,fritz5490-micron|\
|
||||
avm,fritz7362sl|\
|
||||
avm,fritz7412|\
|
||||
avm,fritz7430|\
|
||||
avm,fritz7490|\
|
||||
avm,fritz7490-micron|\
|
||||
bt,homehub-v5a|\
|
||||
zyxel,p-2812hnu-f1|\
|
||||
zyxel,p-2812hnu-f3)
|
||||
nand_do_upgrade $1
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
97
target/linux/lantiq/xrx200/config-6.6
Normal file
97
target/linux/lantiq/xrx200/config-6.6
Normal file
@@ -0,0 +1,97 @@
|
||||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_CONTEXT_TRACKING=y
|
||||
CONFIG_CONTEXT_TRACKING_IDLE=y
|
||||
CONFIG_CPU_MIPSR2_IRQ_EI=y
|
||||
CONFIG_CPU_MIPSR2_IRQ_VI=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_ZSTD=y
|
||||
CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
|
||||
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
||||
CONFIG_GRO_CELLS=y
|
||||
CONFIG_HWMON=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
CONFIG_IFX_VPE_EXT=y
|
||||
CONFIG_INPUT=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INTEL_XWAY_PHY=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
# CONFIG_ISDN is not set
|
||||
CONFIG_LANTIQ_XRX200=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MIPS_MT=y
|
||||
# CONFIG_MIPS_MT_FPAFF is not set
|
||||
CONFIG_MIPS_MT_SMP=y
|
||||
CONFIG_MIPS_NR_CPU_NR_MAP=2
|
||||
CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
|
||||
CONFIG_MIPS_VPE_APSP_API=y
|
||||
CONFIG_MIPS_VPE_APSP_API_MT=y
|
||||
CONFIG_MIPS_VPE_LOADER=y
|
||||
CONFIG_MIPS_VPE_LOADER_MT=y
|
||||
CONFIG_MIPS_VPE_LOADER_TOM=y
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
CONFIG_MTD_NAND_XWAY=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_NEED_SRCU_NMI_SAFE=y
|
||||
CONFIG_NET_DEVLINK=y
|
||||
CONFIG_NET_DSA=y
|
||||
CONFIG_NET_DSA_LANTIQ_GSWIP=y
|
||||
CONFIG_NET_DSA_TAG_GSWIP=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NR_CPUS=2
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_LANTIQ=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_LANTIQ=y
|
||||
CONFIG_PHYLINK=y
|
||||
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
|
||||
CONFIG_POWER_RESET_GPIO=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_POWER_SUPPLY_HWMON=y
|
||||
CONFIG_QCOM_NET_PHYLIB=y
|
||||
CONFIG_QUEUED_RWLOCKS=y
|
||||
CONFIG_QUEUED_SPINLOCKS=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_SENSORS_LTQ_CPUTEMP=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SMP_UP=y
|
||||
CONFIG_SOCK_RX_QUEUE_MAPPING=y
|
||||
CONFIG_SYNC_R4K=y
|
||||
CONFIG_SYS_SUPPORTS_SCHED_SMT=y
|
||||
CONFIG_SYS_SUPPORTS_SMP=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TREE_SRCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_COMMON=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XXHASH=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZSTD_COMMON=y
|
||||
CONFIG_ZSTD_COMPRESS=y
|
||||
CONFIG_ZSTD_DECOMPRESS=y
|
||||
9
target/linux/lantiq/xrx200/profiles/00-default.mk
Normal file
9
target/linux/lantiq/xrx200/profiles/00-default.mk
Normal file
@@ -0,0 +1,9 @@
|
||||
define Profile/Default
|
||||
NAME:=Default Profile
|
||||
PRIORITY:=1
|
||||
endef
|
||||
|
||||
define Profile/Default/Description
|
||||
Default package set compatible with most boards.
|
||||
endef
|
||||
$(eval $(call Profile,Default))
|
||||
22
target/linux/lantiq/xrx200/target.mk
Normal file
22
target/linux/lantiq/xrx200/target.mk
Normal file
@@ -0,0 +1,22 @@
|
||||
ARCH:=mips
|
||||
SUBTARGET:=xrx200
|
||||
BOARDNAME:=XRX200
|
||||
FEATURES+=atm nand ramdisk
|
||||
CPU_TYPE:=24kc
|
||||
|
||||
DEFAULT_PACKAGES+=kmod-leds-gpio \
|
||||
kmod-gpio-button-hotplug \
|
||||
ltq-vdsl-vr9-vectoring-fw-installer \
|
||||
kmod-ltq-vdsl-vr9-mei \
|
||||
kmod-ltq-vdsl-vr9 \
|
||||
kmod-ltq-atm-vr9 \
|
||||
kmod-ltq-deu-vr9 \
|
||||
kmod-ltq-ptm-vr9 \
|
||||
ltq-vdsl-vr9-app \
|
||||
dsl-vrx200-firmware-xdsl-a \
|
||||
dsl-vrx200-firmware-xdsl-b-patch \
|
||||
ppp-mod-pppoa
|
||||
|
||||
define Target/Description
|
||||
Lantiq XRX200
|
||||
endef
|
||||
Reference in New Issue
Block a user