Initial commit
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
This commit is contained in:
domenico
25
target/linux/layerscape/Makefile
Normal file
25
target/linux/layerscape/Makefile
Normal file
@@ -0,0 +1,25 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
#
|
||||
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
|
||||
|
||||
include $(TOPDIR)/rules.mk
|
||||
|
||||
BOARD:=layerscape
|
||||
BOARDNAME:=NXP Layerscape
|
||||
|
||||
KERNEL_PATCHVER:=6.1
|
||||
KERNEL_TESTING_PATCHVER:=6.6
|
||||
|
||||
FEATURES:=squashfs nand usb pcie gpio fpu ubifs ext4 rootfs-part boot-part
|
||||
SUBTARGETS:=armv8_64b armv7
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for NXP Layerscape based boards.
|
||||
endef
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
|
||||
DEFAULT_PACKAGES += kmod-usb3 kmod-usb-dwc3 kmod-usb-storage \
|
||||
mkf2fs e2fsprogs partx-utils
|
||||
|
||||
$(eval $(call BuildTarget))
|
||||
222
target/linux/layerscape/README
Normal file
222
target/linux/layerscape/README
Normal file
@@ -0,0 +1,222 @@
|
||||
|
||||
Layerscape Quick Start
|
||||
|
||||
This is a quick start guide for Layerscape specific usage, like introducing
|
||||
how to configure, build, and deploy OpenWrt to Layerscape boards, so that
|
||||
users can bring up the board without difficulty.
|
||||
|
||||
|
||||
1. Target support
|
||||
----------------------------
|
||||
* ARMv8 64-bit
|
||||
LS1012ARDB (QSPI NOR boot)
|
||||
LS1012AFRDM (QSPI NOR boot)
|
||||
LS1012AFRWY (QSPI NOR boot)
|
||||
LS1028ARDB (QSPI NOR boot | SD card boot)
|
||||
LS1043ARDB (NOR boot | SD card boot)
|
||||
LS1046ARDB (QSPI NOR boot | SD card boot)
|
||||
LS1046AFRWY (QSPI NOR boot | SD card boot)
|
||||
LS1088ARDB (QSPI NOR boot | SD card boot)
|
||||
LS2088ARDB (NOR boot)
|
||||
LX2160ARDB Rev2.0 (FlexSPI NOR boot | SD card boot)
|
||||
|
||||
* ARMv7
|
||||
LS1021ATWR (NOR boot | SD card boot)
|
||||
LS1021AIOT (SD card boot)
|
||||
|
||||
|
||||
2. Build
|
||||
--------
|
||||
Before configuration and build, update and install package feeds.
|
||||
|
||||
$ ./scripts/feeds update -a
|
||||
$ ./scripts/feeds install -a
|
||||
|
||||
* make menuconfig
|
||||
Target System: "NXP Layerscape"
|
||||
Subtarget: (Select subtarget)
|
||||
Target Profile: (Select device, or "Multiple devices")
|
||||
Target Devices: (Select devices. Available when Target Profile is "Multiple devices")
|
||||
Target Images: (Disable "GZip images" if you don't want to unzip manually to use the images.)
|
||||
|
||||
Note: The first time make menuconfig would create a .config file which
|
||||
would include all dependencies for selected target. After that, make
|
||||
menuconfig still could be used to modify packages. If want to change
|
||||
other target, please remove .config and make menuconfig to select again.
|
||||
Otherwise the packages selected in .config would be a mess.
|
||||
|
||||
* make download (or make download -j<n>)
|
||||
|
||||
* make (or make -j<n>)
|
||||
|
||||
* Final firmware/image
|
||||
Path: bin/targets/layerscape/<subtarget>/
|
||||
Firmware for flash: openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin
|
||||
Image for SD card: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sdcard.img.gz
|
||||
Sysupgrade images: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sysupgrade.bin
|
||||
|
||||
|
||||
3. Deploy
|
||||
---------
|
||||
The firmware.bin or sdcard.img is an all-in-one image including all things
|
||||
for OpenWrt staring up except LS1012AFRWY (Refer to 3.3).
|
||||
If you want to install all things into flash, please use firmware.bin.
|
||||
If you want to install all things into SD card, please use sdcard.img.
|
||||
|
||||
3.1 Program sdcard.img to SD card
|
||||
---------------------------------
|
||||
sdcard.img could be programmed to SD card in either u-boot environment
|
||||
or linux environment. After programming, configure the board to boot
|
||||
from SD card. (sdcard.img images are gz-iped to save space. Please extract them first.)
|
||||
|
||||
* u-boot environment
|
||||
|
||||
=> tftp a0000000 <image_name>-sdcard.img
|
||||
=> mmc write a0000000 0 a0000
|
||||
|
||||
Note: The default sdcard.img size is 320MB. a0000 is the block number for 320MB.
|
||||
blk_num = filesize / 512.
|
||||
|
||||
* linux environment
|
||||
|
||||
$ dd if=./<image_name>-sdcard.img of=/dev/mmcblkx
|
||||
|
||||
Note: Need to check the SD card device name to replace "mmcblkx".
|
||||
|
||||
3.2 Program firmware.bin to flash
|
||||
---------------------------------
|
||||
* LS1012ARDB
|
||||
Start up from bank1, and program firmware to bank2 with below commands.
|
||||
Switch to bank2 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> i2c mw 0x24 0x7 0xfc;i2c mw 0x24 0x3 0xf5
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
* LS1028ARDB
|
||||
Board has only one bank. Those commands will replace stock bootloader
|
||||
and firmware.
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
* LS1043ARDB
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> protect off all
|
||||
=> erase 64000000 +$filesize
|
||||
=> cp.b a0000000 64000000 $filesize
|
||||
=> cpld reset altbank
|
||||
|
||||
* LS1046ARDB
|
||||
Start up from bank1, and program firmware to bank2 with below commands.
|
||||
Switch to bank2 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:1
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> cpld reset altbank
|
||||
|
||||
* LS2088ARDB
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> protect off all
|
||||
=> erase 584000000 +$filesize
|
||||
=> cp.b a0000000 584000000 $filesize
|
||||
=> qix altbank
|
||||
|
||||
* LS1012FRDM/LS1046AFRWY
|
||||
Board has only one bank. Those commands will replace stock bootloader
|
||||
and firmware.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
* LS1088ARDB/LX2160ARDB Rev2.0
|
||||
Start up from bank0, and program firmware to bank1 with below commands.
|
||||
Switch to bank1 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:1
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> qix altbank
|
||||
|
||||
Note: old version u-boot of ls1088ardb may use below commands to switch to
|
||||
bank1 instead of 'qix altbank'.
|
||||
=> i2c mw 66 50 20;i2c mw 66 10 20;i2c mw 66 10 21
|
||||
|
||||
* LS1021ATWR
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> protect off all
|
||||
=> erase 64000000 +$filesize
|
||||
=> cp.b a0000000 64000000 $filesize
|
||||
=> boot_bank 1
|
||||
|
||||
3.3 Program LS1012AFRWY
|
||||
-----------------------
|
||||
* LS1012AFRWY (QSPI flash + SD card)
|
||||
LS1012AFRWY only supports 2MB QSPI flash. We have to put u-boot, and
|
||||
some firmwares on QSPI flash, and kernel/dtb/rootfs on SD card.
|
||||
So both firmware.bin and sdcard.img are needed for OpenWrt starting up.
|
||||
|
||||
To program sdcard.img, please use linux command described in 3.1 on a
|
||||
linux machine.
|
||||
To program firmware.bin, start up board from QSPI flash, and program
|
||||
firmware with below commands. Reset to start up OpenWrt. (LS1012AFRWY
|
||||
supports only one bank.)
|
||||
|
||||
=> tftp 96000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write 96000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
|
||||
4. Known issues and limitation
|
||||
------------------------------
|
||||
* U-boot may fail to read MAC addresses from EEPROM on some boards and there
|
||||
won't be MAC addresses set in environment. This may cause kernel fails to
|
||||
probe these network interfaces. The workaround is to set MAC addresses
|
||||
manually, for example,
|
||||
|
||||
=> setenv ethaddr 00:04:9F:04:65:4b
|
||||
=> setenv eth1addr 00:04:9F:04:65:4c
|
||||
=> saveenv
|
||||
|
||||
* In case users want to refer Layerscape SDK doc for network configuration,
|
||||
like TSN (Time-Sensitive Networking) on LS1028A, the OpenWrt LAN/WAN router
|
||||
setting should be removed before that.
|
||||
|
||||
# ubus call network.interface.lan remove
|
||||
# ubus call network.interface.wan remove
|
||||
# ubus call network.interface.wan6 remove
|
||||
|
||||
And firewall may be needed to stop.
|
||||
|
||||
# /etc/init.d/firewall stop
|
||||
|
||||
|
||||
5. Other references
|
||||
-------------------
|
||||
- NXP LSDK source: https://lsdk.github.io/
|
||||
|
||||
- NXP LSDK site: https://www.nxp.com/design/software/embedded-software/linux-software-and-development-tools/layerscape-software-development-kit:LAYERSCAPE-SDK
|
||||
|
||||
- OpenWrt documentation: https://openwrt.org/docs/start
|
||||
699
target/linux/layerscape/armv7/config-6.1
Normal file
699
target/linux/layerscape/armv7/config-6.1
Normal file
@@ -0,0 +1,699 @@
|
||||
CONFIG_AD525X_DPOT=y
|
||||
CONFIG_AD525X_DPOT_I2C=y
|
||||
# CONFIG_AD525X_DPOT_SPI is not set
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
CONFIG_APDS9802ALS=y
|
||||
CONFIG_AQUANTIA_PHY=y
|
||||
CONFIG_ARCH_32BIT_OFF_T=y
|
||||
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MULTIPLATFORM=y
|
||||
CONFIG_ARCH_MULTI_V6_V7=y
|
||||
CONFIG_ARCH_MULTI_V7=y
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
|
||||
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
|
||||
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_ARCH_SPARSEMEM_ENABLE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ARCH_TIMER=y
|
||||
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
|
||||
CONFIG_ARM_CPUIDLE=y
|
||||
CONFIG_ARM_CPU_SUSPEND=y
|
||||
CONFIG_ARM_ERRATA_430973=y
|
||||
CONFIG_ARM_ERRATA_643719=y
|
||||
CONFIG_ARM_ERRATA_720789=y
|
||||
CONFIG_ARM_ERRATA_754322=y
|
||||
CONFIG_ARM_ERRATA_754327=y
|
||||
CONFIG_ARM_ERRATA_764369=y
|
||||
CONFIG_ARM_ERRATA_775420=y
|
||||
CONFIG_ARM_ERRATA_798181=y
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_HAS_GROUP_RELOCS=y
|
||||
CONFIG_ARM_HEAVY_MB=y
|
||||
# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
|
||||
# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
|
||||
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
|
||||
# CONFIG_ARM_IMX_CPUFREQ_DT is not set
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=6
|
||||
CONFIG_ARM_L1_CACHE_SHIFT_6=y
|
||||
CONFIG_ARM_LPAE=y
|
||||
CONFIG_ARM_PATCH_IDIV=y
|
||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||
CONFIG_ARM_PSCI=y
|
||||
CONFIG_ARM_PSCI_FW=y
|
||||
# CONFIG_ARM_SMMU is not set
|
||||
CONFIG_ARM_THUMB=y
|
||||
CONFIG_ARM_THUMBEE=y
|
||||
CONFIG_ARM_UNWIND=y
|
||||
CONFIG_ARM_VIRT_EXT=y
|
||||
CONFIG_ATAGS=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_AUTOFS_FS=y
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
CONFIG_BATTERY_SBS=y
|
||||
CONFIG_BCM_NET_PHYLIB=y
|
||||
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
|
||||
CONFIG_BLK_DEV_BSG=y
|
||||
CONFIG_BLK_DEV_BSG_COMMON=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=262144
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_BLK_MQ_VIRTIO=y
|
||||
CONFIG_BLK_PM=y
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_BRCMSTB_GISB_ARB=y
|
||||
CONFIG_BROADCOM_PHY=y
|
||||
CONFIG_CACHE_L2X0=y
|
||||
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
|
||||
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
|
||||
CONFIG_CC_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_CDROM=y
|
||||
CONFIG_CHECKPOINT_RESTORE=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_CLKSRC_IMX_GPT=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
# CONFIG_CLK_IMX8MM is not set
|
||||
# CONFIG_CLK_IMX8MN is not set
|
||||
# CONFIG_CLK_IMX8MP is not set
|
||||
# CONFIG_CLK_IMX8MQ is not set
|
||||
# CONFIG_CLK_IMX8ULP is not set
|
||||
# CONFIG_CLK_IMX93 is not set
|
||||
CONFIG_CLK_QORIQ=y
|
||||
# CONFIG_CLK_VEXPRESS_OSC is not set
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CMA=y
|
||||
CONFIG_CMA_ALIGNMENT=8
|
||||
CONFIG_CMA_AREAS=7
|
||||
# CONFIG_CMA_DEBUG is not set
|
||||
# CONFIG_CMA_DEBUGFS is not set
|
||||
CONFIG_CMA_SIZE_MBYTES=64
|
||||
# CONFIG_CMA_SIZE_SEL_MAX is not set
|
||||
CONFIG_CMA_SIZE_SEL_MBYTES=y
|
||||
# CONFIG_CMA_SIZE_SEL_MIN is not set
|
||||
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
|
||||
# CONFIG_CMA_SYSFS is not set
|
||||
CONFIG_CMDLINE_PARTITION=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
|
||||
CONFIG_COMPAT_32BIT_TIME=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_CONSOLE_TRANSLATIONS=y
|
||||
CONFIG_CONTEXT_TRACKING=y
|
||||
CONFIG_CONTEXT_TRACKING_IDLE=y
|
||||
CONFIG_CONTIG_ALLOC=y
|
||||
CONFIG_COREDUMP=y
|
||||
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_CPUFREQ_DT_PLATDEV=y
|
||||
CONFIG_CPU_32v6K=y
|
||||
CONFIG_CPU_32v7=y
|
||||
CONFIG_CPU_ABRT_EV7=y
|
||||
CONFIG_CPU_CACHE_V7=y
|
||||
CONFIG_CPU_CACHE_VIPT=y
|
||||
CONFIG_CPU_COPY_V6=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
||||
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
||||
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
|
||||
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_HAS_ASID=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_MENU=y
|
||||
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_PABRT_V7=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CPU_SPECTRE=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_CPU_THUMB_CAPABLE=y
|
||||
CONFIG_CPU_TLB_V7=y
|
||||
CONFIG_CPU_V7=y
|
||||
CONFIG_CRASH_CORE=y
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CROSS_MEMORY_ATTACH=y
|
||||
CONFIG_CRYPTO_CRC32=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||
CONFIG_CRYPTO_LIB_SHA1=y
|
||||
CONFIG_CRYPTO_LIB_UTILS=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_ZSTD=y
|
||||
CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_ALIGN_RODATA=y
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
|
||||
CONFIG_DECOMPRESS_BZIP2=y
|
||||
CONFIG_DECOMPRESS_GZIP=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DECOMPRESS_LZO=y
|
||||
CONFIG_DECOMPRESS_XZ=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
|
||||
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
|
||||
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
|
||||
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
|
||||
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
|
||||
# CONFIG_DEVFREQ_THERMAL is not set
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMA_CMA=y
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DMA_OF=y
|
||||
CONFIG_DMA_OPS=y
|
||||
CONFIG_DMA_SHARED_BUFFER=y
|
||||
CONFIG_DMA_VIRTUAL_CHANNELS=y
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_DT_IDLE_STATES=y
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_DW_DMAC=y
|
||||
CONFIG_DW_DMAC_CORE=y
|
||||
CONFIG_DW_WATCHDOG=y
|
||||
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_EEPROM_93CX6=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_ELF_CORE=y
|
||||
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
|
||||
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_F2FS_FS=y
|
||||
CONFIG_FAILOVER=y
|
||||
CONFIG_FAT_FS=y
|
||||
# CONFIG_FEC is not set
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FREEZER=y
|
||||
# CONFIG_FSL_DPAA2_SWITCH is not set
|
||||
CONFIG_FSL_EDMA=y
|
||||
CONFIG_FSL_GUTS=y
|
||||
CONFIG_FSL_IFC=y
|
||||
# CONFIG_FSL_PPFE is not set
|
||||
CONFIG_FSL_PQ_MDIO=y
|
||||
CONFIG_FSL_RCPM=y
|
||||
CONFIG_FSL_XGMAC_MDIO=y
|
||||
CONFIG_FS_IOMAP=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_FTRACE=y
|
||||
# CONFIG_FTRACE_SYSCALLS is not set
|
||||
CONFIG_FUSE_FS=y
|
||||
CONFIG_FWNODE_MDIO=y
|
||||
CONFIG_FW_CACHE=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
CONFIG_FW_LOADER_SYSFS=y
|
||||
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
|
||||
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ARCH_TOPOLOGY=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
CONFIG_GENERIC_CPU_VULNERABILITIES=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_GETTIMEOFDAY=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IRQ_CHIP=y
|
||||
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
||||
CONFIG_GENERIC_IRQ_MIGRATION=y
|
||||
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
|
||||
CONFIG_GENERIC_MSI_IRQ=y
|
||||
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_PINCONF=y
|
||||
CONFIG_GENERIC_PINCTRL_GROUPS=y
|
||||
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
CONFIG_GENERIC_VDSO_32=y
|
||||
CONFIG_GIANFAR=y
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB_IRQCHIP=y
|
||||
CONFIG_GPIO_CDEV=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_GPIO_MPC8XXX=y
|
||||
CONFIG_GPIO_MXC=y
|
||||
CONFIG_GPIO_VF610=y
|
||||
CONFIG_HARDEN_BRANCH_PREDICTOR=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
CONFIG_HAVE_SMP=y
|
||||
CONFIG_HID=y
|
||||
CONFIG_HID_GENERIC=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_HIGHPTE=y
|
||||
# CONFIG_HIST_TRIGGERS is not set
|
||||
CONFIG_HOTPLUG_CPU=y
|
||||
CONFIG_HVC_DRIVER=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ_FIXED=0
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_COMPAT=y
|
||||
CONFIG_I2C_DEMUX_PINCTRL=y
|
||||
CONFIG_I2C_DESIGNWARE_CORE=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
CONFIG_I2C_HELPER_AUTO=y
|
||||
CONFIG_I2C_IMX=y
|
||||
# CONFIG_I2C_IMX_LPI2C is not set
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_I2C_MUX_PINCTRL=y
|
||||
CONFIG_I2C_RK3X=y
|
||||
CONFIG_I2C_SLAVE=y
|
||||
CONFIG_I2C_SLAVE_EEPROM=y
|
||||
# CONFIG_I2C_SLAVE_TESTUNIT is not set
|
||||
CONFIG_I2C_XILINX=y
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
CONFIG_ICS932S401=y
|
||||
CONFIG_IMX2_WDT=y
|
||||
# CONFIG_IMX7ULP_WDT is not set
|
||||
# CONFIG_IMX8MM_THERMAL is not set
|
||||
CONFIG_IMX_DMA=y
|
||||
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
|
||||
CONFIG_IMX_INTMUX=y
|
||||
# CONFIG_IMX_IRQSTEER is not set
|
||||
# CONFIG_IMX_MU_MSI is not set
|
||||
CONFIG_IMX_SDMA=y
|
||||
# CONFIG_IMX_WEIM is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_IOMMU_DEBUGFS is not set
|
||||
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
|
||||
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
|
||||
CONFIG_IOMMU_SUPPORT=y
|
||||
CONFIG_IPC_NS=y
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQSTACKS=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
# CONFIG_ISDN is not set
|
||||
CONFIG_ISL29003=y
|
||||
CONFIG_JBD2=y
|
||||
CONFIG_KALLSYMS=y
|
||||
CONFIG_KCMP=y
|
||||
CONFIG_KERNEL_GZIP=y
|
||||
# CONFIG_KERNEL_XZ is not set
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_KEXEC_CORE=y
|
||||
CONFIG_KMAP_LOCAL=y
|
||||
CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LS_EXTIRQ=y
|
||||
CONFIG_LS_SCFG_MSI=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_MCPM=y
|
||||
CONFIG_MDIO_BITBANG=y
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MDIO_DEVRES=y
|
||||
# CONFIG_MDIO_GPIO is not set
|
||||
CONFIG_MEMFD_CREATE=y
|
||||
CONFIG_MEMORY=y
|
||||
CONFIG_MEMORY_ISOLATION=y
|
||||
# CONFIG_MFD_HI6421_SPMI is not set
|
||||
CONFIG_MFD_SYSCON=y
|
||||
# CONFIG_MFD_VEXPRESS_SYSREG is not set
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
|
||||
CONFIG_MIGRATION=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_BLOCK_MINORS=16
|
||||
# CONFIG_MMC_MXC is not set
|
||||
CONFIG_MMC_SDHCI=y
|
||||
# CONFIG_MMC_SDHCI_ESDHC_IMX is not set
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
CONFIG_MMC_SDHCI_OF_ESDHC=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_GEOMETRY=y
|
||||
CONFIG_MTD_CFI_STAA=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
# CONFIG_MTD_DATAFLASH_OTP is not set
|
||||
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
|
||||
CONFIG_MTD_NAND_FSL_IFC=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
|
||||
CONFIG_MTD_SST25L=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
# CONFIG_MTD_UBI_BLOCK is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
CONFIG_MX3_IPU=y
|
||||
CONFIG_MX3_IPU_IRQS=4
|
||||
CONFIG_MXC_CLK=y
|
||||
# CONFIG_MXS_DMA is not set
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_NATIONAL_PHY=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_NET_FAILOVER=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_NS=y
|
||||
CONFIG_NET_PTP_CLASSIFY=y
|
||||
CONFIG_NET_SELFTESTS=y
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_CPUS=16
|
||||
CONFIG_NTFS_FS=y
|
||||
CONFIG_NVMEM=y
|
||||
# CONFIG_NVMEM_IMX_IIM is not set
|
||||
# CONFIG_NVMEM_IMX_OCOTP_ELE is not set
|
||||
# CONFIG_NVMEM_SNVS_LPGPR is not set
|
||||
# CONFIG_NVMEM_SPMI_SDAM is not set
|
||||
CONFIG_NVMEM_SYSFS=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_DYNAMIC=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_KOBJ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_OUTER_CACHE=y
|
||||
CONFIG_OUTER_CACHE_SYNC=y
|
||||
CONFIG_PACKET_DIAG=y
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PAGE_POOL=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
|
||||
# CONFIG_PANIC_ON_OOPS is not set
|
||||
CONFIG_PANIC_ON_OOPS_VALUE=0
|
||||
CONFIG_PANIC_TIMEOUT=0
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEASPM=y
|
||||
CONFIG_PCIEASPM_DEFAULT=y
|
||||
# CONFIG_PCIEASPM_PERFORMANCE is not set
|
||||
# CONFIG_PCIEASPM_POWERSAVE is not set
|
||||
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCIE_DW_HOST=y
|
||||
CONFIG_PCIE_PME=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_ECAM=y
|
||||
CONFIG_PCI_HOST_COMMON=y
|
||||
CONFIG_PCI_HOST_GENERIC=y
|
||||
# CONFIG_PCI_IMX6 is not set
|
||||
CONFIG_PCI_LAYERSCAPE=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCI_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PGTABLE_LEVELS=3
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYS_ADDR_T_64BIT=y
|
||||
CONFIG_PID_NS=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_IMX8ULP is not set
|
||||
# CONFIG_PINCTRL_IMX93 is not set
|
||||
# CONFIG_PINCTRL_IMXRT1050 is not set
|
||||
# CONFIG_PINCTRL_IMXRT1170 is not set
|
||||
CONFIG_PL310_ERRATA_588369=y
|
||||
CONFIG_PL310_ERRATA_727915=y
|
||||
CONFIG_PL310_ERRATA_753970=y
|
||||
CONFIG_PL310_ERRATA_769419=y
|
||||
CONFIG_PM=y
|
||||
CONFIG_PM_CLK=y
|
||||
CONFIG_PM_DEVFREQ=y
|
||||
# CONFIG_PM_DEVFREQ_EVENT is not set
|
||||
CONFIG_PM_OPP=y
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_PM_SLEEP_SMP=y
|
||||
CONFIG_POWER_RESET=y
|
||||
CONFIG_POWER_RESET_BRCMKONA=y
|
||||
CONFIG_POWER_RESET_BRCMSTB=y
|
||||
CONFIG_POWER_RESET_GPIO=y
|
||||
CONFIG_POWER_RESET_GPIO_RESTART=y
|
||||
CONFIG_POWER_RESET_SYSCON=y
|
||||
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
|
||||
CONFIG_POWER_RESET_VEXPRESS=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_PPS=y
|
||||
CONFIG_PREEMPT_NONE_BUILD=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_PROC_CHILDREN=y
|
||||
CONFIG_PROC_PAGE_MONITOR=y
|
||||
CONFIG_PSTORE=y
|
||||
CONFIG_PSTORE_COMPRESS=y
|
||||
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
|
||||
CONFIG_PSTORE_CONSOLE=y
|
||||
CONFIG_PSTORE_DEFLATE_COMPRESS=y
|
||||
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
|
||||
CONFIG_PSTORE_PMSG=y
|
||||
CONFIG_PSTORE_RAM=y
|
||||
CONFIG_PTP_1588_CLOCK=y
|
||||
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
|
||||
CONFIG_PTP_1588_CLOCK_QORIQ=y
|
||||
CONFIG_QORIQ_CPUFREQ=y
|
||||
CONFIG_RANDSTRUCT_NONE=y
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_RD_BZIP2=y
|
||||
CONFIG_RD_GZIP=y
|
||||
CONFIG_RD_LZMA=y
|
||||
CONFIG_RD_LZO=y
|
||||
CONFIG_RD_XZ=y
|
||||
CONFIG_REALTEK_PHY=y
|
||||
CONFIG_REED_SOLOMON=y
|
||||
CONFIG_REED_SOLOMON_DEC8=y
|
||||
CONFIG_REED_SOLOMON_ENC8=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_DRV_CMOS is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_DS3232=y
|
||||
CONFIG_RTC_DRV_EM3027=y
|
||||
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
|
||||
# CONFIG_RTC_DRV_IMXDI is not set
|
||||
# CONFIG_RTC_DRV_MXC is not set
|
||||
# CONFIG_RTC_DRV_MXC_V2 is not set
|
||||
CONFIG_RTC_DRV_PCF2127=y
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
CONFIG_SCHED_DEBUG=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_COMMON=y
|
||||
CONFIG_SECCOMP=y
|
||||
CONFIG_SECCOMP_FILTER=y
|
||||
# CONFIG_SECURITY_DMESG_RESTRICT is not set
|
||||
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
|
||||
CONFIG_SERIAL_8250_DW=y
|
||||
CONFIG_SERIAL_8250_DWLIB=y
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_PCI=y
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
||||
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
|
||||
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
|
||||
CONFIG_SERIAL_FSL_LPUART=y
|
||||
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
|
||||
CONFIG_SERIAL_IMX=y
|
||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
CONFIG_SERIAL_IMX_EARLYCON=y
|
||||
CONFIG_SERIAL_MCTRL_GPIO=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SERIAL_ST_ASC=y
|
||||
CONFIG_SERIAL_ST_ASC_CONSOLE=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SG_POOL=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SMP_ON_UP=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_SOCK_DIAG=y
|
||||
CONFIG_SOCK_RX_QUEUE_MAPPING=y
|
||||
CONFIG_SOC_BRCMSTB=y
|
||||
CONFIG_SOC_BUS=y
|
||||
# CONFIG_SOC_IMX50 is not set
|
||||
# CONFIG_SOC_IMX51 is not set
|
||||
# CONFIG_SOC_IMX53 is not set
|
||||
# CONFIG_SOC_IMX6Q is not set
|
||||
# CONFIG_SOC_IMX6SL is not set
|
||||
# CONFIG_SOC_IMX6SLL is not set
|
||||
# CONFIG_SOC_IMX6SX is not set
|
||||
# CONFIG_SOC_IMX6UL is not set
|
||||
# CONFIG_SOC_IMX7D is not set
|
||||
# CONFIG_SOC_IMX7ULP is not set
|
||||
# CONFIG_SOC_IMX8M is not set
|
||||
# CONFIG_SOC_IMX9 is not set
|
||||
CONFIG_SOC_LS1021A=y
|
||||
# CONFIG_SOC_VF610 is not set
|
||||
CONFIG_SOFTIRQ_ON_OWN_STACK=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_SPI_CADENCE=y
|
||||
CONFIG_SPI_DYNAMIC=y
|
||||
# CONFIG_SPI_FSL_LPSPI is not set
|
||||
# CONFIG_SPI_FSL_QUADSPI is not set
|
||||
# CONFIG_SPI_IMX is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_MEM=y
|
||||
CONFIG_SPI_SPIDEV=y
|
||||
CONFIG_SPI_XILINX=y
|
||||
CONFIG_SPMI=y
|
||||
# CONFIG_SPMI_HISI3670 is not set
|
||||
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
|
||||
CONFIG_SQUASHFS_DECOMP_SINGLE=y
|
||||
CONFIG_SQUASHFS_FILE_CACHE=y
|
||||
# CONFIG_SQUASHFS_FILE_DIRECT is not set
|
||||
CONFIG_SQUASHFS_LZO=y
|
||||
CONFIG_SQUASHFS_ZLIB=y
|
||||
CONFIG_SRAM=y
|
||||
CONFIG_SRAM_EXEC=y
|
||||
CONFIG_SRCU=y
|
||||
CONFIG_STACKTRACE=y
|
||||
CONFIG_STAGING_BOARD=y
|
||||
# CONFIG_STRIP_ASM_SYMS is not set
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_SUSPEND_FREEZER=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SWP_EMULATE=y
|
||||
CONFIG_SYNC_FILE=y
|
||||
CONFIG_SYSFS_SYSCALL=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
||||
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_OF=y
|
||||
CONFIG_THREAD_INFO_IN_TASK=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TIMER_OF=y
|
||||
CONFIG_TIMER_PROBE=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TREE_SRCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
# CONFIG_UCLAMP_TASK is not set
|
||||
CONFIG_UEVENT_HELPER_PATH=""
|
||||
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
||||
CONFIG_UNIX_DIAG=y
|
||||
CONFIG_UNWINDER_ARM=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USER_NS=y
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_UTS_NS=y
|
||||
CONFIG_VEXPRESS_CONFIG=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_VFPv3=y
|
||||
CONFIG_VIRTIO=y
|
||||
CONFIG_VIRTIO_ANCHOR=y
|
||||
CONFIG_VIRTIO_BLK=y
|
||||
CONFIG_VIRTIO_CONSOLE=y
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_VIRTIO_NET=y
|
||||
CONFIG_VIRTIO_PCI=y
|
||||
CONFIG_VIRTIO_PCI_LEGACY=y
|
||||
CONFIG_VIRTIO_PCI_LIB=y
|
||||
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
|
||||
CONFIG_VITESSE_PHY=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_VT_CONSOLE_SLEEP=y
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
|
||||
CONFIG_XILINX_WATCHDOG=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XXHASH=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_ARMTHUMB=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_XZ_DEC_IA64=y
|
||||
CONFIG_XZ_DEC_POWERPC=y
|
||||
CONFIG_XZ_DEC_SPARC=y
|
||||
CONFIG_XZ_DEC_X86=y
|
||||
CONFIG_ZBOOT_ROM_BSS=0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZSTD_COMMON=y
|
||||
CONFIG_ZSTD_COMPRESS=y
|
||||
CONFIG_ZSTD_DECOMPRESS=y
|
||||
706
target/linux/layerscape/armv7/config-6.6
Normal file
706
target/linux/layerscape/armv7/config-6.6
Normal file
@@ -0,0 +1,706 @@
|
||||
CONFIG_AD525X_DPOT=y
|
||||
CONFIG_AD525X_DPOT_I2C=y
|
||||
# CONFIG_AD525X_DPOT_SPI is not set
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
CONFIG_APDS9802ALS=y
|
||||
CONFIG_AQUANTIA_PHY=y
|
||||
CONFIG_ARCH_32BIT_OFF_T=y
|
||||
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MULTIPLATFORM=y
|
||||
CONFIG_ARCH_MULTI_V6_V7=y
|
||||
CONFIG_ARCH_MULTI_V7=y
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
|
||||
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
|
||||
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_ARCH_SPARSEMEM_ENABLE=y
|
||||
CONFIG_ARCH_STACKWALK=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ARCH_TIMER=y
|
||||
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
|
||||
CONFIG_ARM_CPUIDLE=y
|
||||
CONFIG_ARM_CPU_SUSPEND=y
|
||||
CONFIG_ARM_ERRATA_430973=y
|
||||
CONFIG_ARM_ERRATA_643719=y
|
||||
CONFIG_ARM_ERRATA_720789=y
|
||||
CONFIG_ARM_ERRATA_754322=y
|
||||
CONFIG_ARM_ERRATA_754327=y
|
||||
CONFIG_ARM_ERRATA_764369=y
|
||||
CONFIG_ARM_ERRATA_775420=y
|
||||
CONFIG_ARM_ERRATA_798181=y
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_HAS_GROUP_RELOCS=y
|
||||
CONFIG_ARM_HEAVY_MB=y
|
||||
# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
|
||||
# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
|
||||
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
|
||||
# CONFIG_ARM_IMX_CPUFREQ_DT is not set
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=6
|
||||
CONFIG_ARM_L1_CACHE_SHIFT_6=y
|
||||
CONFIG_ARM_LPAE=y
|
||||
CONFIG_ARM_PATCH_IDIV=y
|
||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||
CONFIG_ARM_PSCI=y
|
||||
CONFIG_ARM_PSCI_FW=y
|
||||
# CONFIG_ARM_SMMU is not set
|
||||
CONFIG_ARM_THUMB=y
|
||||
CONFIG_ARM_THUMBEE=y
|
||||
CONFIG_ARM_UNWIND=y
|
||||
CONFIG_ARM_VIRT_EXT=y
|
||||
CONFIG_ATAGS=y
|
||||
CONFIG_AUTOFS_FS=y
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
CONFIG_BATTERY_SBS=y
|
||||
CONFIG_BCM_NET_PHYLIB=y
|
||||
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
|
||||
CONFIG_BLK_DEV_BSG=y
|
||||
CONFIG_BLK_DEV_BSG_COMMON=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=262144
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_DEV_SR=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_BLK_MQ_VIRTIO=y
|
||||
CONFIG_BLK_PM=y
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_BRCMSTB_GISB_ARB=y
|
||||
CONFIG_BROADCOM_PHY=y
|
||||
CONFIG_BUFFER_HEAD=y
|
||||
CONFIG_CACHE_L2X0=y
|
||||
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
|
||||
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
|
||||
CONFIG_CC_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_CDROM=y
|
||||
CONFIG_CHECKPOINT_RESTORE=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_CLKSRC_IMX_GPT=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
# CONFIG_CLK_IMX8MM is not set
|
||||
# CONFIG_CLK_IMX8MN is not set
|
||||
# CONFIG_CLK_IMX8MP is not set
|
||||
# CONFIG_CLK_IMX8MQ is not set
|
||||
# CONFIG_CLK_IMX8ULP is not set
|
||||
# CONFIG_CLK_IMX93 is not set
|
||||
CONFIG_CLK_QORIQ=y
|
||||
# CONFIG_CLK_VEXPRESS_OSC is not set
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CMA=y
|
||||
CONFIG_CMA_ALIGNMENT=8
|
||||
CONFIG_CMA_AREAS=7
|
||||
# CONFIG_CMA_DEBUG is not set
|
||||
# CONFIG_CMA_DEBUGFS is not set
|
||||
CONFIG_CMA_SIZE_MBYTES=64
|
||||
# CONFIG_CMA_SIZE_SEL_MAX is not set
|
||||
CONFIG_CMA_SIZE_SEL_MBYTES=y
|
||||
# CONFIG_CMA_SIZE_SEL_MIN is not set
|
||||
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
|
||||
# CONFIG_CMA_SYSFS is not set
|
||||
CONFIG_CMDLINE_PARTITION=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
|
||||
CONFIG_COMPAT_32BIT_TIME=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_CONSOLE_TRANSLATIONS=y
|
||||
CONFIG_CONTEXT_TRACKING=y
|
||||
CONFIG_CONTEXT_TRACKING_IDLE=y
|
||||
CONFIG_CONTIG_ALLOC=y
|
||||
CONFIG_COREDUMP=y
|
||||
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_CPUFREQ_DT_PLATDEV=y
|
||||
CONFIG_CPU_32v6K=y
|
||||
CONFIG_CPU_32v7=y
|
||||
CONFIG_CPU_ABRT_EV7=y
|
||||
CONFIG_CPU_CACHE_V7=y
|
||||
CONFIG_CPU_CACHE_VIPT=y
|
||||
CONFIG_CPU_COPY_V6=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
||||
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
||||
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
|
||||
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_HAS_ASID=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_MENU=y
|
||||
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_PABRT_V7=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CPU_SPECTRE=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_CPU_THUMB_CAPABLE=y
|
||||
CONFIG_CPU_TLB_V7=y
|
||||
CONFIG_CPU_V7=y
|
||||
CONFIG_CRASH_CORE=y
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CRC_CCITT=y
|
||||
CONFIG_CROSS_MEMORY_ATTACH=y
|
||||
CONFIG_CRYPTO_CRC32=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||
CONFIG_CRYPTO_LIB_GF128MUL=y
|
||||
CONFIG_CRYPTO_LIB_SHA1=y
|
||||
CONFIG_CRYPTO_LIB_UTILS=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_ZSTD=y
|
||||
CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_ALIGN_RODATA=y
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
|
||||
CONFIG_DECOMPRESS_BZIP2=y
|
||||
CONFIG_DECOMPRESS_GZIP=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DECOMPRESS_LZO=y
|
||||
CONFIG_DECOMPRESS_XZ=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
|
||||
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
|
||||
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
|
||||
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
|
||||
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
|
||||
# CONFIG_DEVFREQ_THERMAL is not set
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMA_CMA=y
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DMA_OF=y
|
||||
CONFIG_DMA_OPS=y
|
||||
CONFIG_DMA_SHARED_BUFFER=y
|
||||
CONFIG_DMA_VIRTUAL_CHANNELS=y
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_DT_IDLE_STATES=y
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_DW_DMAC=y
|
||||
CONFIG_DW_DMAC_CORE=y
|
||||
CONFIG_DW_WATCHDOG=y
|
||||
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_EEPROM_93CX6=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_ELF_CORE=y
|
||||
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
|
||||
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_F2FS_FS=y
|
||||
CONFIG_FAILOVER=y
|
||||
CONFIG_FAT_FS=y
|
||||
# CONFIG_FEC is not set
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FREEZER=y
|
||||
CONFIG_FSL_EDMA=y
|
||||
CONFIG_FSL_GUTS=y
|
||||
CONFIG_FSL_IFC=y
|
||||
# CONFIG_FSL_PPFE is not set
|
||||
CONFIG_FSL_PQ_MDIO=y
|
||||
CONFIG_FSL_RCPM=y
|
||||
CONFIG_FSL_XGMAC_MDIO=y
|
||||
CONFIG_FS_IOMAP=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_FTRACE=y
|
||||
# CONFIG_FTRACE_SYSCALLS is not set
|
||||
CONFIG_FUNCTION_ALIGNMENT=0
|
||||
CONFIG_FUSE_FS=y
|
||||
CONFIG_FWNODE_MDIO=y
|
||||
CONFIG_FW_CACHE=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
CONFIG_FW_LOADER_SYSFS=y
|
||||
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
|
||||
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ARCH_TOPOLOGY=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
CONFIG_GENERIC_CPU_VULNERABILITIES=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_GETTIMEOFDAY=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IRQ_CHIP=y
|
||||
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
||||
CONFIG_GENERIC_IRQ_MIGRATION=y
|
||||
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
|
||||
CONFIG_GENERIC_MSI_IRQ=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_PINCONF=y
|
||||
CONFIG_GENERIC_PINCTRL_GROUPS=y
|
||||
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
CONFIG_GENERIC_VDSO_32=y
|
||||
CONFIG_GIANFAR=y
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB_IRQCHIP=y
|
||||
CONFIG_GPIO_CDEV=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_GPIO_MPC8XXX=y
|
||||
CONFIG_GPIO_MXC=y
|
||||
CONFIG_GPIO_VF610=y
|
||||
# CONFIG_HARDEN_BRANCH_HISTORY is not set
|
||||
# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
CONFIG_HAVE_SMP=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_HIGHPTE=y
|
||||
# CONFIG_HIST_TRIGGERS is not set
|
||||
CONFIG_HOTPLUG_CORE_SYNC=y
|
||||
CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
|
||||
CONFIG_HOTPLUG_CPU=y
|
||||
CONFIG_HVC_DRIVER=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ_FIXED=0
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_COMPAT=y
|
||||
CONFIG_I2C_DEMUX_PINCTRL=y
|
||||
CONFIG_I2C_DESIGNWARE_CORE=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
CONFIG_I2C_HELPER_AUTO=y
|
||||
CONFIG_I2C_IMX=y
|
||||
# CONFIG_I2C_IMX_LPI2C is not set
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_I2C_MUX_PINCTRL=y
|
||||
CONFIG_I2C_RK3X=y
|
||||
CONFIG_I2C_SLAVE=y
|
||||
CONFIG_I2C_SLAVE_EEPROM=y
|
||||
# CONFIG_I2C_SLAVE_TESTUNIT is not set
|
||||
CONFIG_I2C_XILINX=y
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
CONFIG_ICS932S401=y
|
||||
CONFIG_IMX2_WDT=y
|
||||
# CONFIG_IMX7ULP_WDT is not set
|
||||
# CONFIG_IMX8MM_THERMAL is not set
|
||||
CONFIG_IMX_DMA=y
|
||||
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
|
||||
CONFIG_IMX_INTMUX=y
|
||||
# CONFIG_IMX_IRQSTEER is not set
|
||||
# CONFIG_IMX_MU_MSI is not set
|
||||
CONFIG_IMX_SDMA=y
|
||||
# CONFIG_IMX_WEIM is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_BBNSM_PWRKEY is not set
|
||||
# CONFIG_IOMMUFD is not set
|
||||
# CONFIG_IOMMU_DEBUGFS is not set
|
||||
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
|
||||
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
|
||||
CONFIG_IOMMU_SUPPORT=y
|
||||
CONFIG_IPC_NS=y
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQSTACKS=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
# CONFIG_ISDN is not set
|
||||
CONFIG_ISL29003=y
|
||||
CONFIG_JBD2=y
|
||||
CONFIG_KALLSYMS=y
|
||||
CONFIG_KCMP=y
|
||||
CONFIG_KERNEL_GZIP=y
|
||||
# CONFIG_KERNEL_XZ is not set
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_KEXEC_CORE=y
|
||||
CONFIG_KMAP_LOCAL=y
|
||||
CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
|
||||
CONFIG_LEGACY_DIRECT_IO=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LS_EXTIRQ=y
|
||||
CONFIG_LS_SCFG_MSI=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_MCPM=y
|
||||
CONFIG_MDIO_BITBANG=y
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MDIO_DEVRES=y
|
||||
# CONFIG_MDIO_GPIO is not set
|
||||
CONFIG_MEMORY=y
|
||||
CONFIG_MEMORY_ISOLATION=y
|
||||
# CONFIG_MFD_HI6421_SPMI is not set
|
||||
CONFIG_MFD_SYSCON=y
|
||||
# CONFIG_MFD_VEXPRESS_SYSREG is not set
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
|
||||
CONFIG_MIGRATION=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_BLOCK_MINORS=16
|
||||
# CONFIG_MMC_MXC is not set
|
||||
CONFIG_MMC_SDHCI=y
|
||||
# CONFIG_MMC_SDHCI_ESDHC_IMX is not set
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
CONFIG_MMC_SDHCI_OF_ESDHC=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_GEOMETRY=y
|
||||
CONFIG_MTD_CFI_STAA=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
# CONFIG_MTD_DATAFLASH_OTP is not set
|
||||
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
|
||||
CONFIG_MTD_NAND_FSL_IFC=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
|
||||
CONFIG_MTD_SST25L=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
# CONFIG_MTD_UBI_BLOCK is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
CONFIG_MXC_CLK=y
|
||||
# CONFIG_MXS_DMA is not set
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_NATIONAL_PHY=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_SRCU_NMI_SAFE=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_NET_EGRESS=y
|
||||
CONFIG_NET_FAILOVER=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_INGRESS=y
|
||||
CONFIG_NET_NS=y
|
||||
CONFIG_NET_PTP_CLASSIFY=y
|
||||
CONFIG_NET_SELFTESTS=y
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_NET_XGRESS=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_CPUS=16
|
||||
CONFIG_NTFS_FS=y
|
||||
CONFIG_NVMEM=y
|
||||
# CONFIG_NVMEM_IMX_IIM is not set
|
||||
# CONFIG_NVMEM_IMX_OCOTP_ELE is not set
|
||||
CONFIG_NVMEM_LAYOUTS=y
|
||||
# CONFIG_NVMEM_SNVS_LPGPR is not set
|
||||
# CONFIG_NVMEM_SPMI_SDAM is not set
|
||||
CONFIG_NVMEM_SYSFS=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_DYNAMIC=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_KOBJ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_OUTER_CACHE=y
|
||||
CONFIG_OUTER_CACHE_SYNC=y
|
||||
CONFIG_PACKET_DIAG=y
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PAGE_POOL=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
|
||||
# CONFIG_PANIC_ON_OOPS is not set
|
||||
CONFIG_PANIC_ON_OOPS_VALUE=0
|
||||
CONFIG_PANIC_TIMEOUT=0
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEASPM=y
|
||||
CONFIG_PCIEASPM_DEFAULT=y
|
||||
# CONFIG_PCIEASPM_PERFORMANCE is not set
|
||||
# CONFIG_PCIEASPM_POWERSAVE is not set
|
||||
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCIE_DW_HOST=y
|
||||
CONFIG_PCIE_PME=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_ECAM=y
|
||||
CONFIG_PCI_HOST_COMMON=y
|
||||
CONFIG_PCI_HOST_GENERIC=y
|
||||
# CONFIG_PCI_IMX6_HOST is not set
|
||||
CONFIG_PCI_LAYERSCAPE=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PGTABLE_LEVELS=3
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYLIB_LEDS=y
|
||||
CONFIG_PHYS_ADDR_T_64BIT=y
|
||||
CONFIG_PID_NS=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_IMX8ULP is not set
|
||||
# CONFIG_PINCTRL_IMX93 is not set
|
||||
# CONFIG_PINCTRL_IMXRT1050 is not set
|
||||
# CONFIG_PINCTRL_IMXRT1170 is not set
|
||||
CONFIG_PL310_ERRATA_588369=y
|
||||
CONFIG_PL310_ERRATA_727915=y
|
||||
CONFIG_PL310_ERRATA_753970=y
|
||||
CONFIG_PL310_ERRATA_769419=y
|
||||
CONFIG_PM=y
|
||||
CONFIG_PM_CLK=y
|
||||
CONFIG_PM_DEVFREQ=y
|
||||
# CONFIG_PM_DEVFREQ_EVENT is not set
|
||||
CONFIG_PM_OPP=y
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_PM_SLEEP_SMP=y
|
||||
CONFIG_POWER_RESET=y
|
||||
CONFIG_POWER_RESET_BRCMKONA=y
|
||||
CONFIG_POWER_RESET_BRCMSTB=y
|
||||
CONFIG_POWER_RESET_GPIO=y
|
||||
CONFIG_POWER_RESET_GPIO_RESTART=y
|
||||
CONFIG_POWER_RESET_SYSCON=y
|
||||
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
|
||||
CONFIG_POWER_RESET_VEXPRESS=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_PPS=y
|
||||
CONFIG_PREEMPT_NONE_BUILD=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_PROC_CHILDREN=y
|
||||
CONFIG_PROC_PAGE_MONITOR=y
|
||||
CONFIG_PSTORE=y
|
||||
CONFIG_PSTORE_COMPRESS=y
|
||||
CONFIG_PSTORE_CONSOLE=y
|
||||
CONFIG_PSTORE_PMSG=y
|
||||
CONFIG_PSTORE_RAM=y
|
||||
CONFIG_PTP_1588_CLOCK=y
|
||||
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
|
||||
CONFIG_PTP_1588_CLOCK_QORIQ=y
|
||||
CONFIG_QORIQ_CPUFREQ=y
|
||||
CONFIG_RANDSTRUCT_NONE=y
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_RD_BZIP2=y
|
||||
CONFIG_RD_GZIP=y
|
||||
CONFIG_RD_LZMA=y
|
||||
CONFIG_RD_LZO=y
|
||||
CONFIG_RD_XZ=y
|
||||
CONFIG_REALTEK_PHY=y
|
||||
CONFIG_REED_SOLOMON=y
|
||||
CONFIG_REED_SOLOMON_DEC8=y
|
||||
CONFIG_REED_SOLOMON_ENC8=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_DRV_BBNSM is not set
|
||||
# CONFIG_RTC_DRV_CMOS is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_DS3232=y
|
||||
CONFIG_RTC_DRV_EM3027=y
|
||||
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
|
||||
# CONFIG_RTC_DRV_IMXDI is not set
|
||||
# CONFIG_RTC_DRV_MXC is not set
|
||||
# CONFIG_RTC_DRV_MXC_V2 is not set
|
||||
CONFIG_RTC_DRV_PCF2127=y
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
CONFIG_SCHED_DEBUG=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_COMMON=y
|
||||
CONFIG_SECCOMP=y
|
||||
CONFIG_SECCOMP_FILTER=y
|
||||
# CONFIG_SECURITY_DMESG_RESTRICT is not set
|
||||
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
|
||||
CONFIG_SERIAL_8250_DW=y
|
||||
CONFIG_SERIAL_8250_DWLIB=y
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_PCI=y
|
||||
CONFIG_SERIAL_8250_PCILIB=y
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
||||
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
|
||||
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
|
||||
CONFIG_SERIAL_FSL_LPUART=y
|
||||
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
|
||||
CONFIG_SERIAL_IMX=y
|
||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
CONFIG_SERIAL_IMX_EARLYCON=y
|
||||
CONFIG_SERIAL_MCTRL_GPIO=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SERIAL_ST_ASC=y
|
||||
CONFIG_SERIAL_ST_ASC_CONSOLE=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SG_POOL=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SMP_ON_UP=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_SOCK_DIAG=y
|
||||
CONFIG_SOCK_RX_QUEUE_MAPPING=y
|
||||
CONFIG_SOC_BRCMSTB=y
|
||||
CONFIG_SOC_BUS=y
|
||||
# CONFIG_SOC_IMX50 is not set
|
||||
# CONFIG_SOC_IMX51 is not set
|
||||
# CONFIG_SOC_IMX53 is not set
|
||||
# CONFIG_SOC_IMX6Q is not set
|
||||
# CONFIG_SOC_IMX6SL is not set
|
||||
# CONFIG_SOC_IMX6SLL is not set
|
||||
# CONFIG_SOC_IMX6SX is not set
|
||||
# CONFIG_SOC_IMX6UL is not set
|
||||
# CONFIG_SOC_IMX7D is not set
|
||||
# CONFIG_SOC_IMX7ULP is not set
|
||||
# CONFIG_SOC_IMX8M is not set
|
||||
# CONFIG_SOC_IMX9 is not set
|
||||
CONFIG_SOC_LS1021A=y
|
||||
# CONFIG_SOC_VF610 is not set
|
||||
CONFIG_SOFTIRQ_ON_OWN_STACK=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_SPI_CADENCE=y
|
||||
CONFIG_SPI_DYNAMIC=y
|
||||
# CONFIG_SPI_FSL_LPSPI is not set
|
||||
# CONFIG_SPI_FSL_QUADSPI is not set
|
||||
# CONFIG_SPI_IMX is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_MEM=y
|
||||
CONFIG_SPI_SPIDEV=y
|
||||
CONFIG_SPI_XILINX=y
|
||||
CONFIG_SPMI=y
|
||||
# CONFIG_SPMI_HISI3670 is not set
|
||||
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
|
||||
CONFIG_SQUASHFS_FILE_CACHE=y
|
||||
# CONFIG_SQUASHFS_FILE_DIRECT is not set
|
||||
CONFIG_SQUASHFS_LZO=y
|
||||
CONFIG_SQUASHFS_ZLIB=y
|
||||
CONFIG_SRAM=y
|
||||
CONFIG_SRAM_EXEC=y
|
||||
# CONFIG_SSIF_IPMI_BMC is not set
|
||||
CONFIG_STACKTRACE=y
|
||||
CONFIG_STAGING_BOARD=y
|
||||
# CONFIG_STRIP_ASM_SYMS is not set
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_SUSPEND_FREEZER=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SWP_EMULATE=y
|
||||
CONFIG_SYNC_FILE=y
|
||||
CONFIG_SYSFS_SYSCALL=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
||||
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_OF=y
|
||||
CONFIG_THREAD_INFO_IN_TASK=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TIMER_OF=y
|
||||
CONFIG_TIMER_PROBE=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TREE_SRCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
# CONFIG_UCLAMP_TASK is not set
|
||||
CONFIG_UEVENT_HELPER_PATH=""
|
||||
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
||||
CONFIG_UNIX_DIAG=y
|
||||
CONFIG_UNWINDER_ARM=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USER_NS=y
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_UTS_NS=y
|
||||
CONFIG_VEXPRESS_CONFIG=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_VFPv3=y
|
||||
CONFIG_VIRTIO=y
|
||||
CONFIG_VIRTIO_ANCHOR=y
|
||||
CONFIG_VIRTIO_BLK=y
|
||||
CONFIG_VIRTIO_CONSOLE=y
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_VIRTIO_NET=y
|
||||
CONFIG_VIRTIO_PCI=y
|
||||
CONFIG_VIRTIO_PCI_LEGACY=y
|
||||
CONFIG_VIRTIO_PCI_LIB=y
|
||||
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
|
||||
CONFIG_VITESSE_PHY=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_VT_CONSOLE_SLEEP=y
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
|
||||
CONFIG_XILINX_WATCHDOG=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XXHASH=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_ARMTHUMB=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_XZ_DEC_IA64=y
|
||||
CONFIG_XZ_DEC_POWERPC=y
|
||||
CONFIG_XZ_DEC_SPARC=y
|
||||
CONFIG_XZ_DEC_X86=y
|
||||
CONFIG_ZBOOT_ROM_BSS=0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZSTD_COMMON=y
|
||||
CONFIG_ZSTD_COMPRESS=y
|
||||
CONFIG_ZSTD_DECOMPRESS=y
|
||||
13
target/linux/layerscape/armv7/target.mk
Normal file
13
target/linux/layerscape/armv7/target.mk
Normal file
@@ -0,0 +1,13 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
#
|
||||
# Copyright 2018 NXP
|
||||
|
||||
ARCH:=arm
|
||||
BOARDNAME:=ARMv7 based boards
|
||||
CPU_TYPE:=cortex-a7
|
||||
CPU_SUBTYPE:=neon-vfpv4
|
||||
KERNELNAME:=zImage dtbs
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for NXP Layerscape ARMv7 based boards.
|
||||
endef
|
||||
905
target/linux/layerscape/armv8_64b/config-6.1
Normal file
905
target/linux/layerscape/armv8_64b/config-6.1
Normal file
@@ -0,0 +1,905 @@
|
||||
CONFIG_64BIT=y
|
||||
CONFIG_AQUANTIA_PHY=y
|
||||
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
|
||||
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
|
||||
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||
CONFIG_ARCH_HIBERNATION_HEADER=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||
CONFIG_ARCH_LAYERSCAPE=y
|
||||
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
|
||||
CONFIG_ARCH_MMAP_RND_BITS=18
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
|
||||
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
CONFIG_ARCH_NXP=y
|
||||
CONFIG_ARCH_PROC_KCORE_TEXT=y
|
||||
CONFIG_ARCH_SPARSEMEM_ENABLE=y
|
||||
CONFIG_ARCH_STACKWALK=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANTS_NO_INSTR=y
|
||||
CONFIG_ARCH_WANTS_THP_SWAP=y
|
||||
CONFIG_ARM64=y
|
||||
CONFIG_ARM64_4K_PAGES=y
|
||||
CONFIG_ARM64_CNP=y
|
||||
CONFIG_ARM64_EPAN=y
|
||||
CONFIG_ARM64_ERRATUM_1165522=y
|
||||
CONFIG_ARM64_ERRATUM_1286807=y
|
||||
CONFIG_ARM64_ERRATUM_2051678=y
|
||||
CONFIG_ARM64_ERRATUM_2054223=y
|
||||
CONFIG_ARM64_ERRATUM_2067961=y
|
||||
CONFIG_ARM64_ERRATUM_2077057=y
|
||||
CONFIG_ARM64_ERRATUM_2658417=y
|
||||
CONFIG_ARM64_ERRATUM_819472=y
|
||||
CONFIG_ARM64_ERRATUM_824069=y
|
||||
CONFIG_ARM64_ERRATUM_826319=y
|
||||
CONFIG_ARM64_ERRATUM_827319=y
|
||||
CONFIG_ARM64_ERRATUM_832075=y
|
||||
CONFIG_ARM64_ERRATUM_843419=y
|
||||
CONFIG_ARM64_HW_AFDBM=y
|
||||
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
|
||||
CONFIG_ARM64_PAGE_SHIFT=12
|
||||
CONFIG_ARM64_PAN=y
|
||||
CONFIG_ARM64_PA_BITS=48
|
||||
CONFIG_ARM64_PA_BITS_48=y
|
||||
CONFIG_ARM64_PTR_AUTH=y
|
||||
CONFIG_ARM64_PTR_AUTH_KERNEL=y
|
||||
CONFIG_ARM64_SME=y
|
||||
CONFIG_ARM64_SVE=y
|
||||
CONFIG_ARM64_TAGGED_ADDR_ABI=y
|
||||
CONFIG_ARM64_VA_BITS=48
|
||||
# CONFIG_ARM64_VA_BITS_39 is not set
|
||||
CONFIG_ARM64_VA_BITS_48=y
|
||||
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
|
||||
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
|
||||
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
|
||||
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
CONFIG_ARM_ARCH_TIMER=y
|
||||
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
||||
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_GIC_V2M=y
|
||||
CONFIG_ARM_GIC_V3=y
|
||||
CONFIG_ARM_GIC_V3_ITS=y
|
||||
CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
|
||||
CONFIG_ARM_GIC_V3_ITS_PCI=y
|
||||
# CONFIG_ARM_PL172_MPMC is not set
|
||||
CONFIG_ARM_PSCI_CPUIDLE=y
|
||||
CONFIG_ARM_PSCI_FW=y
|
||||
CONFIG_ARM_SMMU=y
|
||||
# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
|
||||
# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
|
||||
CONFIG_ARM_SMMU_V3=y
|
||||
# CONFIG_ARM_SMMU_V3_SVA is not set
|
||||
CONFIG_ARM_SP805_WATCHDOG=y
|
||||
CONFIG_ASM_MODVERSIONS=y
|
||||
CONFIG_ASN1=y
|
||||
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_AUDITSYSCALL=y
|
||||
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
|
||||
CONFIG_AUDIT_GENERIC=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_AUTOFS_FS=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BALLOON_COMPACTION=y
|
||||
CONFIG_BATTERY_BQ27XXX=y
|
||||
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
|
||||
CONFIG_BATTERY_BQ27XXX_I2C=y
|
||||
CONFIG_BLK_DEV_BSG=y
|
||||
CONFIG_BLK_DEV_BSGLIB=y
|
||||
CONFIG_BLK_DEV_BSG_COMMON=y
|
||||
CONFIG_BLK_DEV_INTEGRITY=y
|
||||
CONFIG_BLK_DEV_INTEGRITY_T10=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=262144
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_BLK_MQ_VIRTIO=y
|
||||
CONFIG_BLK_PM=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_BSD_PROCESS_ACCT_V3=y
|
||||
CONFIG_BTRFS_FS=y
|
||||
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
|
||||
CONFIG_BTRFS_FS_POSIX_ACL=y
|
||||
CONFIG_CAVIUM_ERRATUM_22375=y
|
||||
CONFIG_CAVIUM_ERRATUM_23144=y
|
||||
CONFIG_CAVIUM_ERRATUM_23154=y
|
||||
CONFIG_CAVIUM_ERRATUM_27456=y
|
||||
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
|
||||
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
|
||||
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
|
||||
CONFIG_CC_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_CHECKPOINT_RESTORE=y
|
||||
CONFIG_CHROME_PLATFORMS=y
|
||||
CONFIG_CLK_LS1028A_PLLDIG=y
|
||||
CONFIG_CLK_QORIQ=y
|
||||
# CONFIG_CLK_VEXPRESS_OSC is not set
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CLZ_TAB=y
|
||||
CONFIG_CMA=y
|
||||
CONFIG_CMA_ALIGNMENT=8
|
||||
CONFIG_CMA_AREAS=7
|
||||
# CONFIG_CMA_DEBUG is not set
|
||||
# CONFIG_CMA_DEBUGFS is not set
|
||||
CONFIG_CMA_SIZE_MBYTES=16
|
||||
# CONFIG_CMA_SIZE_SEL_MAX is not set
|
||||
CONFIG_CMA_SIZE_SEL_MBYTES=y
|
||||
# CONFIG_CMA_SIZE_SEL_MIN is not set
|
||||
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
|
||||
# CONFIG_CMA_SYSFS is not set
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMMON_CLK_CS2000_CP=y
|
||||
CONFIG_COMMON_CLK_FSL_FLEXSPI=y
|
||||
# CONFIG_COMMON_CLK_FSL_SAI is not set
|
||||
CONFIG_COMMON_CLK_XGENE=y
|
||||
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
|
||||
CONFIG_COMPAT_32BIT_TIME=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_CONSOLE_TRANSLATIONS=y
|
||||
CONFIG_CONTEXT_TRACKING=y
|
||||
CONFIG_CONTEXT_TRACKING_IDLE=y
|
||||
CONFIG_CONTIG_ALLOC=y
|
||||
CONFIG_COREDUMP=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_CPUFREQ_DT_PLATDEV=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
|
||||
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_FREQ_THERMAL=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_MENU=y
|
||||
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_CRASH_CORE=y
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CRC64=y
|
||||
CONFIG_CRC64_ROCKSOFT=y
|
||||
CONFIG_CRC7=y
|
||||
CONFIG_CRC_ITU_T=y
|
||||
CONFIG_CRC_T10DIF=y
|
||||
CONFIG_CROSS_MEMORY_ATTACH=y
|
||||
# CONFIG_CROS_EC is not set
|
||||
CONFIG_CRYPTO_AES_ARM64=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
|
||||
CONFIG_CRYPTO_AUTHENC=y
|
||||
CONFIG_CRYPTO_BLAKE2B=y
|
||||
CONFIG_CRYPTO_CRC32=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
|
||||
CONFIG_CRYPTO_CRCT10DIF=y
|
||||
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
|
||||
CONFIG_CRYPTO_CRYPTD=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI=y
|
||||
# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
|
||||
# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_PRNG_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_ENGINE=y
|
||||
CONFIG_CRYPTO_GHASH_ARM64_CE=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||
CONFIG_CRYPTO_LIB_DES=y
|
||||
CONFIG_CRYPTO_LIB_SHA1=y
|
||||
CONFIG_CRYPTO_LIB_SHA256=y
|
||||
CONFIG_CRYPTO_LIB_UTILS=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_RNG=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_RSA=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_CRYPTO_SHA256_ARM64=y
|
||||
CONFIG_CRYPTO_SHA2_ARM64_CE=y
|
||||
CONFIG_CRYPTO_XTS=y
|
||||
CONFIG_CRYPTO_XXHASH=y
|
||||
CONFIG_CRYPTO_ZSTD=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_MEMORY_INIT=y
|
||||
CONFIG_DECOMPRESS_BZIP2=y
|
||||
CONFIG_DECOMPRESS_GZIP=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DECOMPRESS_LZO=y
|
||||
CONFIG_DECOMPRESS_XZ=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_DIMLIB=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMATEST=y
|
||||
CONFIG_DMA_CMA=y
|
||||
CONFIG_DMA_DIRECT_REMAP=y
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DMA_ENGINE_RAID=y
|
||||
CONFIG_DMA_OF=y
|
||||
CONFIG_DMA_OPS=y
|
||||
CONFIG_DMA_SHARED_BUFFER=y
|
||||
CONFIG_DMA_VIRTUAL_CHANNELS=y
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DPAA2_CONSOLE=y
|
||||
CONFIG_DPAA_ERRATUM_A050385=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_DT_IDLE_STATES=y
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_ELF_CORE=y
|
||||
# CONFIG_EMBEDDED is not set
|
||||
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_EXTCON=y
|
||||
CONFIG_EXTCON_USB_GPIO=y
|
||||
CONFIG_F2FS_FS=y
|
||||
CONFIG_FAILOVER=y
|
||||
CONFIG_FANOTIFY=y
|
||||
CONFIG_FAT_FS=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_ARMCLCD=y
|
||||
CONFIG_FB_CFB_COPYAREA=y
|
||||
CONFIG_FB_CFB_FILLRECT=y
|
||||
CONFIG_FB_CFB_IMAGEBLIT=y
|
||||
CONFIG_FB_CMDLINE=y
|
||||
CONFIG_FB_DEFERRED_IO=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_SYS_COPYAREA=y
|
||||
CONFIG_FB_SYS_FILLRECT=y
|
||||
CONFIG_FB_SYS_FOPS=y
|
||||
CONFIG_FB_SYS_IMAGEBLIT=y
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FONT_8x16=y
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_FONT_SUPPORT=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FREEZER=y
|
||||
# CONFIG_FSL_BMAN_TEST is not set
|
||||
CONFIG_FSL_DPAA=y
|
||||
CONFIG_FSL_DPAA2_ETH=y
|
||||
CONFIG_FSL_DPAA2_PTP_CLOCK=y
|
||||
# CONFIG_FSL_DPAA2_QDMA is not set
|
||||
# CONFIG_FSL_DPAA2_SWITCH is not set
|
||||
# CONFIG_FSL_DPAA_CHECKING is not set
|
||||
CONFIG_FSL_DPAA_ETH=y
|
||||
CONFIG_FSL_EDMA=y
|
||||
CONFIG_FSL_ENETC=y
|
||||
CONFIG_FSL_ENETC_IERB=y
|
||||
CONFIG_FSL_ENETC_MDIO=y
|
||||
CONFIG_FSL_ENETC_PTP_CLOCK=y
|
||||
CONFIG_FSL_ENETC_VF=y
|
||||
CONFIG_FSL_ERRATUM_A008585=y
|
||||
CONFIG_FSL_FMAN=y
|
||||
CONFIG_FSL_GUTS=y
|
||||
CONFIG_FSL_IFC=y
|
||||
CONFIG_FSL_MC_BUS=y
|
||||
CONFIG_FSL_MC_DPIO=y
|
||||
CONFIG_FSL_MC_UAPI_SUPPORT=y
|
||||
# CONFIG_FSL_PPFE is not set
|
||||
# CONFIG_FSL_QMAN_TEST is not set
|
||||
CONFIG_FSL_RCPM=y
|
||||
CONFIG_FSL_XGMAC_MDIO=y
|
||||
CONFIG_FS_IOMAP=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_FUSE_FS=y
|
||||
CONFIG_FWNODE_MDIO=y
|
||||
CONFIG_FW_CACHE=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
CONFIG_FW_LOADER_SYSFS=y
|
||||
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
|
||||
CONFIG_GARP=y
|
||||
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ARCH_NUMA=y
|
||||
CONFIG_GENERIC_ARCH_TOPOLOGY=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
CONFIG_GENERIC_CPU_VULNERABILITIES=y
|
||||
CONFIG_GENERIC_CSUM=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_GETTIMEOFDAY=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IOREMAP=y
|
||||
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
||||
CONFIG_GENERIC_IRQ_MIGRATION=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
|
||||
CONFIG_GENERIC_MSI_IRQ=y
|
||||
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
# CONFIG_GIANFAR is not set
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB_IRQCHIP=y
|
||||
CONFIG_GPIO_CDEV=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_GPIO_MPC8XXX=y
|
||||
CONFIG_GPIO_PCA953X=y
|
||||
CONFIG_GPIO_PCA953X_IRQ=y
|
||||
CONFIG_GRO_CELLS=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
CONFIG_HIBERNATE_CALLBACKS=y
|
||||
CONFIG_HIBERNATION=y
|
||||
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
|
||||
CONFIG_HID=y
|
||||
CONFIG_HID_A4TECH=y
|
||||
CONFIG_HID_APPLE=y
|
||||
CONFIG_HID_BELKIN=y
|
||||
CONFIG_HID_CHERRY=y
|
||||
CONFIG_HID_CYPRESS=y
|
||||
CONFIG_HID_EZKEY=y
|
||||
CONFIG_HID_GENERIC=y
|
||||
CONFIG_HID_KENSINGTON=y
|
||||
CONFIG_HID_MICROSOFT=y
|
||||
CONFIG_HID_MONTEREY=y
|
||||
CONFIG_HOTPLUG_CPU=y
|
||||
CONFIG_HUGETLBFS=y
|
||||
CONFIG_HUGETLB_PAGE=y
|
||||
CONFIG_HVC_DRIVER=y
|
||||
CONFIG_HVC_IRQ=y
|
||||
CONFIG_HVC_XEN=y
|
||||
CONFIG_HVC_XEN_FRONTEND=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_COMPAT=y
|
||||
CONFIG_I2C_DESIGNWARE_CORE=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
CONFIG_I2C_HELPER_AUTO=y
|
||||
CONFIG_I2C_IMX=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_I2C_RK3X=y
|
||||
CONFIG_I2C_SLAVE=y
|
||||
# CONFIG_I2C_SLAVE_TESTUNIT is not set
|
||||
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
|
||||
CONFIG_IMX2_WDT=y
|
||||
CONFIG_INET_DIAG=y
|
||||
# CONFIG_INET_DIAG_DESTROY is not set
|
||||
# CONFIG_INET_RAW_DIAG is not set
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_INPUT=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_FF_MEMLESS=y
|
||||
CONFIG_INPUT_KEYBOARD=y
|
||||
CONFIG_INPUT_MOUSE=y
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
CONFIG_INPUT_VIVALDIFMAP=y
|
||||
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
|
||||
CONFIG_INTERVAL_TREE=y
|
||||
CONFIG_IOMMU_API=y
|
||||
# CONFIG_IOMMU_DEBUGFS is not set
|
||||
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
|
||||
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
|
||||
CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
|
||||
CONFIG_IOMMU_DMA=y
|
||||
CONFIG_IOMMU_IOVA=y
|
||||
CONFIG_IOMMU_IO_PGTABLE=y
|
||||
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
|
||||
# CONFIG_IOMMU_IO_PGTABLE_DART is not set
|
||||
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
|
||||
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
|
||||
CONFIG_IOMMU_SUPPORT=y
|
||||
CONFIG_IPC_NS=y
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_BYPASS_MANAGER=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_MSI_IOMMU=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
# CONFIG_ISDN is not set
|
||||
CONFIG_JBD2=y
|
||||
CONFIG_JUMP_LABEL=y
|
||||
CONFIG_KALLSYMS=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_KCMP=y
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_KEXEC_CORE=y
|
||||
CONFIG_KEYBOARD_ATKBD=y
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
CONFIG_KSM=y
|
||||
CONFIG_LIBCRC32C=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_LOGO_LINUX_CLUT224=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_LS_EXTIRQ=y
|
||||
CONFIG_LS_SCFG_MSI=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_MDIO_BITBANG=y
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_BUS_MUX=y
|
||||
CONFIG_MDIO_BUS_MUX_MMIOREG=y
|
||||
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MDIO_DEVRES=y
|
||||
# CONFIG_MDIO_GPIO is not set
|
||||
CONFIG_MEMFD_CREATE=y
|
||||
CONFIG_MEMORY=y
|
||||
CONFIG_MEMORY_BALLOON=y
|
||||
CONFIG_MEMORY_ISOLATION=y
|
||||
CONFIG_MEMTEST=y
|
||||
# CONFIG_MFD_HI6421_SPMI is not set
|
||||
CONFIG_MFD_SYSCON=y
|
||||
# CONFIG_MFD_VEXPRESS_SYSREG is not set
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_MICROSEMI_PHY=y
|
||||
CONFIG_MIGRATION=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_BLOCK_MINORS=32
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
CONFIG_MMC_SDHCI_OF_ESDHC=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMU_NOTIFIER=y
|
||||
CONFIG_MODULES_USE_ELF_RELA=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
# CONFIG_MOUSE_BCM5974 is not set
|
||||
# CONFIG_MOUSE_CYAPA is not set
|
||||
CONFIG_MOUSE_PS2=y
|
||||
CONFIG_MOUSE_PS2_ALPS=y
|
||||
CONFIG_MOUSE_PS2_BYD=y
|
||||
CONFIG_MOUSE_PS2_CYPRESS=y
|
||||
# CONFIG_MOUSE_PS2_ELANTECH is not set
|
||||
CONFIG_MOUSE_PS2_FOCALTECH=y
|
||||
CONFIG_MOUSE_PS2_LOGIPS2PP=y
|
||||
CONFIG_MOUSE_PS2_SMBUS=y
|
||||
CONFIG_MOUSE_PS2_SYNAPTICS=y
|
||||
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
|
||||
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
|
||||
CONFIG_MOUSE_PS2_TRACKPOINT=y
|
||||
# CONFIG_MOUSE_SERIAL is not set
|
||||
# CONFIG_MOUSE_VSXXXAA is not set
|
||||
CONFIG_MPILIB=y
|
||||
CONFIG_MRP=y
|
||||
CONFIG_MSCC_OCELOT_SWITCH_LIB=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
# CONFIG_MTD_CFI_GEOMETRY is not set
|
||||
CONFIG_MTD_CFI_STAA=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
# CONFIG_MTD_DATAFLASH_OTP is not set
|
||||
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
|
||||
CONFIG_MTD_NAND_FSL_IFC=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_SPI_NAND=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_SPLIT_FIT_FW=y
|
||||
CONFIG_MTD_SST25L=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MULTIPLEXER=y
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
CONFIG_MUX_MMIO=y
|
||||
CONFIG_MV_XOR_V2=y
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
|
||||
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
|
||||
CONFIG_NEED_SG_DMA_LENGTH=y
|
||||
CONFIG_NET_DEVLINK=y
|
||||
CONFIG_NET_DSA=y
|
||||
CONFIG_NET_DSA_MSCC_FELIX=y
|
||||
CONFIG_NET_DSA_TAG_OCELOT=y
|
||||
CONFIG_NET_DSA_TAG_OCELOT_8021Q=y
|
||||
CONFIG_NET_FAILOVER=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_NS=y
|
||||
CONFIG_NET_PTP_CLASSIFY=y
|
||||
CONFIG_NET_SELFTESTS=y
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NODES_SHIFT=2
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_CPUS=64
|
||||
CONFIG_NUMA=y
|
||||
CONFIG_NUMA_BALANCING=y
|
||||
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
|
||||
CONFIG_NVMEM=y
|
||||
CONFIG_NVMEM_LAYERSCAPE_SFP=y
|
||||
# CONFIG_NVMEM_SPMI_SDAM is not set
|
||||
CONFIG_NVMEM_SYSFS=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IOMMU=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_KOBJ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_NUMA=y
|
||||
CONFIG_PACKET_DIAG=y
|
||||
CONFIG_PACKING=y
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PAGE_POOL=y
|
||||
CONFIG_PAGE_REPORTING=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
|
||||
# CONFIG_PANIC_ON_OOPS is not set
|
||||
CONFIG_PANIC_ON_OOPS_VALUE=0
|
||||
CONFIG_PANIC_TIMEOUT=0
|
||||
CONFIG_PARAVIRT=y
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_PARTITION_PERCPU=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEASPM=y
|
||||
CONFIG_PCIEASPM_DEFAULT=y
|
||||
# CONFIG_PCIEASPM_PERFORMANCE is not set
|
||||
# CONFIG_PCIEASPM_POWERSAVE is not set
|
||||
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCIE_DW_HOST=y
|
||||
CONFIG_PCIE_LAYERSCAPE_GEN4=y
|
||||
CONFIG_PCIE_MOBIVEIL=y
|
||||
CONFIG_PCIE_MOBIVEIL_HOST=y
|
||||
CONFIG_PCIE_PME=y
|
||||
CONFIG_PCI_ATS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_ECAM=y
|
||||
CONFIG_PCI_HISI=y
|
||||
CONFIG_PCI_HOST_COMMON=y
|
||||
CONFIG_PCI_HOST_GENERIC=y
|
||||
CONFIG_PCI_IOV=y
|
||||
CONFIG_PCI_LAYERSCAPE=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCI_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_PCS_LYNX=y
|
||||
CONFIG_PGTABLE_LEVELS=4
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYLINK=y
|
||||
CONFIG_PHYS_ADDR_T_64BIT=y
|
||||
# CONFIG_PHY_FSL_LYNX_28G is not set
|
||||
CONFIG_PHY_XGENE=y
|
||||
CONFIG_PID_IN_CONTEXTIDR=y
|
||||
CONFIG_PID_NS=y
|
||||
CONFIG_PL330_DMA=y
|
||||
CONFIG_PM=y
|
||||
CONFIG_PM_CLK=y
|
||||
CONFIG_PM_OPP=y
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_PM_SLEEP_SMP=y
|
||||
CONFIG_PM_STD_PARTITION=""
|
||||
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
|
||||
CONFIG_POWER_RESET=y
|
||||
CONFIG_POWER_RESET_SYSCON=y
|
||||
CONFIG_POWER_RESET_VEXPRESS=y
|
||||
CONFIG_POWER_RESET_XGENE=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_PPS=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_PREEMPTION=y
|
||||
CONFIG_PREEMPT_BUILD=y
|
||||
CONFIG_PREEMPT_COUNT=y
|
||||
# CONFIG_PREEMPT_NONE is not set
|
||||
CONFIG_PREEMPT_RCU=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_PRINT_QUOTA_WARNING=y
|
||||
CONFIG_PROC_CHILDREN=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_PTP_1588_CLOCK=y
|
||||
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
|
||||
CONFIG_PTP_1588_CLOCK_QORIQ=y
|
||||
CONFIG_QCOM_HIDMA=y
|
||||
CONFIG_QCOM_HIDMA_MGMT=y
|
||||
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
|
||||
# CONFIG_QFMT_V2 is not set
|
||||
CONFIG_QORIQ_CPUFREQ=y
|
||||
CONFIG_QORIQ_THERMAL=y
|
||||
CONFIG_QUEUED_RWLOCKS=y
|
||||
CONFIG_QUEUED_SPINLOCKS=y
|
||||
CONFIG_QUOTA=y
|
||||
CONFIG_QUOTACTL=y
|
||||
CONFIG_RAID6_PQ=y
|
||||
# CONFIG_RANDOMIZE_KSTACK_OFFSET is not set
|
||||
CONFIG_RANDSTRUCT_NONE=y
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_RD_BZIP2=y
|
||||
CONFIG_RD_GZIP=y
|
||||
CONFIG_RD_LZMA=y
|
||||
CONFIG_RD_LZO=y
|
||||
CONFIG_RD_XZ=y
|
||||
CONFIG_REALTEK_PHY=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_DS3232=y
|
||||
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
|
||||
CONFIG_RTC_DRV_PCF2127=y
|
||||
CONFIG_RTC_DRV_PL031=y
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
CONFIG_SCHED_INFO=y
|
||||
CONFIG_SCHED_MC=y
|
||||
CONFIG_SCHED_THERMAL_PRESSURE=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_COMMON=y
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
# CONFIG_SCSI_SAS_ATA is not set
|
||||
CONFIG_SCSI_SAS_ATTRS=y
|
||||
CONFIG_SCSI_SAS_HOST_SMP=y
|
||||
CONFIG_SCSI_SAS_LIBSAS=y
|
||||
CONFIG_SECCOMP=y
|
||||
CONFIG_SECCOMP_FILTER=y
|
||||
CONFIG_SECRETMEM=y
|
||||
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
|
||||
CONFIG_SERIAL_8250_DW=y
|
||||
CONFIG_SERIAL_8250_DWLIB=y
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_PCI=y
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_SERIAL_FSL_LPUART=y
|
||||
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
|
||||
CONFIG_SERIAL_MCTRL_GPIO=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SERIAL_SC16IS7XX=y
|
||||
CONFIG_SERIAL_SC16IS7XX_CORE=y
|
||||
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
|
||||
CONFIG_SERIAL_SC16IS7XX_SPI=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
|
||||
CONFIG_SERIO=y
|
||||
CONFIG_SERIO_AMBAKMI=y
|
||||
CONFIG_SERIO_LIBPS2=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SG_POOL=y
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_SLUB is not set
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SOCK_DIAG=y
|
||||
CONFIG_SOCK_RX_QUEUE_MAPPING=y
|
||||
CONFIG_SOC_BUS=y
|
||||
CONFIG_SOFTIRQ_ON_OWN_STACK=y
|
||||
CONFIG_SPARSEMEM=y
|
||||
CONFIG_SPARSEMEM_EXTREME=y
|
||||
CONFIG_SPARSEMEM_VMEMMAP=y
|
||||
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_FSL_DSPI=y
|
||||
CONFIG_SPI_FSL_QUADSPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_MEM=y
|
||||
CONFIG_SPI_NXP_FLEXSPI=y
|
||||
CONFIG_SPI_PL022=y
|
||||
CONFIG_SPMI=y
|
||||
# CONFIG_SPMI_HISI3670 is not set
|
||||
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
|
||||
CONFIG_SQUASHFS_DECOMP_SINGLE=y
|
||||
CONFIG_SQUASHFS_FILE_CACHE=y
|
||||
# CONFIG_SQUASHFS_FILE_DIRECT is not set
|
||||
# CONFIG_SQUASHFS_XZ is not set
|
||||
CONFIG_SQUASHFS_ZLIB=y
|
||||
CONFIG_SRAM=y
|
||||
CONFIG_SRCU=y
|
||||
# CONFIG_STRIP_ASM_SYMS is not set
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_SUSPEND_FREEZER=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWIOTLB_XEN=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SYNC_FILE=y
|
||||
CONFIG_SYSCTL_EXCEPTION_TRACE=y
|
||||
CONFIG_SYSFS_SYSCALL=y
|
||||
CONFIG_SYS_HYPERVISOR=y
|
||||
CONFIG_TASKSTATS=y
|
||||
CONFIG_TASK_DELAY_ACCT=y
|
||||
CONFIG_TASK_IO_ACCOUNTING=y
|
||||
CONFIG_TASK_XACCT=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
||||
CONFIG_THERMAL_EMULATION=y
|
||||
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_OF=y
|
||||
CONFIG_THP_SWAP=y
|
||||
CONFIG_THREAD_INFO_IN_TASK=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TIMER_OF=y
|
||||
CONFIG_TIMER_PROBE=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
|
||||
CONFIG_TRANSPARENT_HUGEPAGE=y
|
||||
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
|
||||
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
|
||||
CONFIG_TRANS_TABLE=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TREE_SRCU=y
|
||||
# CONFIG_UACCE is not set
|
||||
CONFIG_UBIFS_FS=y
|
||||
# CONFIG_UCLAMP_TASK is not set
|
||||
CONFIG_UIO=y
|
||||
CONFIG_UIO_AEC=y
|
||||
CONFIG_UIO_CIF=y
|
||||
CONFIG_UIO_DMEM_GENIRQ=y
|
||||
CONFIG_UIO_MF624=y
|
||||
CONFIG_UIO_NETX=y
|
||||
CONFIG_UIO_PCI_GENERIC=y
|
||||
CONFIG_UIO_PDRV_GENIRQ=y
|
||||
# CONFIG_UIO_PRUSS is not set
|
||||
CONFIG_UIO_SERCOS3=y
|
||||
CONFIG_UNINLINE_SPIN_UNLOCK=y
|
||||
CONFIG_UNIX_DIAG=y
|
||||
CONFIG_UNMAP_KERNEL_AT_EL0=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USER_NS=y
|
||||
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
|
||||
CONFIG_UTS_NS=y
|
||||
CONFIG_VEXPRESS_CONFIG=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_VFIO=y
|
||||
CONFIG_VFIO_FSL_MC=y
|
||||
CONFIG_VFIO_IOMMU_TYPE1=y
|
||||
# CONFIG_VFIO_MDEV is not set
|
||||
# CONFIG_VFIO_NOIOMMU is not set
|
||||
CONFIG_VFIO_PCI=y
|
||||
CONFIG_VFIO_PCI_CORE=y
|
||||
CONFIG_VFIO_PCI_INTX=y
|
||||
CONFIG_VFIO_PCI_MMAP=y
|
||||
CONFIG_VFIO_VIRQFD=y
|
||||
CONFIG_VGA_ARB=y
|
||||
CONFIG_VGA_ARB_MAX_GPUS=16
|
||||
CONFIG_VIDEOMODE_HELPERS=y
|
||||
CONFIG_VIRTIO=y
|
||||
CONFIG_VIRTIO_ANCHOR=y
|
||||
CONFIG_VIRTIO_BALLOON=y
|
||||
CONFIG_VIRTIO_BLK=y
|
||||
CONFIG_VIRTIO_CONSOLE=y
|
||||
# CONFIG_VIRTIO_IOMMU is not set
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_VIRTIO_NET=y
|
||||
CONFIG_VIRTIO_PCI=y
|
||||
CONFIG_VIRTIO_PCI_LEGACY=y
|
||||
CONFIG_VIRTIO_PCI_LIB=y
|
||||
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
|
||||
CONFIG_VITESSE_PHY=y
|
||||
CONFIG_VLAN_8021Q_GVRP=y
|
||||
CONFIG_VLAN_8021Q_MVRP=y
|
||||
CONFIG_VMAP_STACK=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_VT_CONSOLE_SLEEP=y
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
|
||||
CONFIG_XARRAY_MULTI=y
|
||||
CONFIG_XEN=y
|
||||
CONFIG_XENFS=y
|
||||
CONFIG_XEN_AUTO_XLATE=y
|
||||
CONFIG_XEN_BACKEND=y
|
||||
CONFIG_XEN_BALLOON=y
|
||||
# CONFIG_XEN_BLKDEV_BACKEND is not set
|
||||
CONFIG_XEN_BLKDEV_FRONTEND=y
|
||||
CONFIG_XEN_COMPAT_XENFS=y
|
||||
CONFIG_XEN_DEV_EVTCHN=y
|
||||
CONFIG_XEN_DOM0=y
|
||||
CONFIG_XEN_FBDEV_FRONTEND=y
|
||||
CONFIG_XEN_GNTDEV=y
|
||||
CONFIG_XEN_GRANT_DEV_ALLOC=y
|
||||
# CONFIG_XEN_NETDEV_BACKEND is not set
|
||||
CONFIG_XEN_NETDEV_FRONTEND=y
|
||||
# CONFIG_XEN_PCIDEV_STUB is not set
|
||||
CONFIG_XEN_PRIVCMD=y
|
||||
# CONFIG_XEN_PVCALLS_BACKEND is not set
|
||||
# CONFIG_XEN_SCSI_FRONTEND is not set
|
||||
CONFIG_XEN_SYS_HYPERVISOR=y
|
||||
# CONFIG_XEN_VIRTIO is not set
|
||||
# CONFIG_XEN_WDT is not set
|
||||
CONFIG_XEN_XENBUS_FRONTEND=y
|
||||
CONFIG_XFS_FS=y
|
||||
CONFIG_XFS_POSIX_ACL=y
|
||||
CONFIG_XFS_RT=y
|
||||
CONFIG_XOR_BLOCKS=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XXHASH=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_ARMTHUMB=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_XZ_DEC_IA64=y
|
||||
CONFIG_XZ_DEC_POWERPC=y
|
||||
CONFIG_XZ_DEC_SPARC=y
|
||||
CONFIG_XZ_DEC_X86=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZONE_DMA32=y
|
||||
CONFIG_ZSTD_COMMON=y
|
||||
CONFIG_ZSTD_COMPRESS=y
|
||||
CONFIG_ZSTD_DECOMPRESS=y
|
||||
915
target/linux/layerscape/armv8_64b/config-6.6
Normal file
915
target/linux/layerscape/armv8_64b/config-6.6
Normal file
@@ -0,0 +1,915 @@
|
||||
CONFIG_64BIT=y
|
||||
CONFIG_AQUANTIA_PHY=y
|
||||
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
|
||||
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
|
||||
CONFIG_ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG=y
|
||||
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||
CONFIG_ARCH_FORCE_MAX_ORDER=10
|
||||
CONFIG_ARCH_HIBERNATION_HEADER=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||
CONFIG_ARCH_LAYERSCAPE=y
|
||||
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
|
||||
CONFIG_ARCH_MMAP_RND_BITS=18
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
|
||||
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
|
||||
CONFIG_ARCH_NXP=y
|
||||
CONFIG_ARCH_PROC_KCORE_TEXT=y
|
||||
CONFIG_ARCH_SPARSEMEM_ENABLE=y
|
||||
CONFIG_ARCH_STACKWALK=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANTS_NO_INSTR=y
|
||||
CONFIG_ARCH_WANTS_THP_SWAP=y
|
||||
CONFIG_ARM64=y
|
||||
CONFIG_ARM64_4K_PAGES=y
|
||||
CONFIG_ARM64_CNP=y
|
||||
CONFIG_ARM64_EPAN=y
|
||||
CONFIG_ARM64_ERRATUM_1165522=y
|
||||
CONFIG_ARM64_ERRATUM_1286807=y
|
||||
CONFIG_ARM64_ERRATUM_2051678=y
|
||||
CONFIG_ARM64_ERRATUM_2054223=y
|
||||
CONFIG_ARM64_ERRATUM_2067961=y
|
||||
CONFIG_ARM64_ERRATUM_2077057=y
|
||||
CONFIG_ARM64_ERRATUM_2658417=y
|
||||
CONFIG_ARM64_ERRATUM_819472=y
|
||||
CONFIG_ARM64_ERRATUM_824069=y
|
||||
CONFIG_ARM64_ERRATUM_826319=y
|
||||
CONFIG_ARM64_ERRATUM_827319=y
|
||||
CONFIG_ARM64_ERRATUM_832075=y
|
||||
CONFIG_ARM64_ERRATUM_843419=y
|
||||
CONFIG_ARM64_HW_AFDBM=y
|
||||
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
|
||||
CONFIG_ARM64_PAGE_SHIFT=12
|
||||
CONFIG_ARM64_PAN=y
|
||||
CONFIG_ARM64_PA_BITS=48
|
||||
CONFIG_ARM64_PA_BITS_48=y
|
||||
CONFIG_ARM64_PTR_AUTH=y
|
||||
CONFIG_ARM64_PTR_AUTH_KERNEL=y
|
||||
CONFIG_ARM64_SME=y
|
||||
CONFIG_ARM64_SVE=y
|
||||
CONFIG_ARM64_TAGGED_ADDR_ABI=y
|
||||
CONFIG_ARM64_VA_BITS=48
|
||||
# CONFIG_ARM64_VA_BITS_39 is not set
|
||||
CONFIG_ARM64_VA_BITS_48=y
|
||||
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
|
||||
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
|
||||
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
|
||||
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
CONFIG_ARM_ARCH_TIMER=y
|
||||
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
||||
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_GIC_V2M=y
|
||||
CONFIG_ARM_GIC_V3=y
|
||||
CONFIG_ARM_GIC_V3_ITS=y
|
||||
CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
|
||||
CONFIG_ARM_GIC_V3_ITS_PCI=y
|
||||
# CONFIG_ARM_PL172_MPMC is not set
|
||||
CONFIG_ARM_PSCI_CPUIDLE=y
|
||||
CONFIG_ARM_PSCI_FW=y
|
||||
CONFIG_ARM_SMMU=y
|
||||
# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
|
||||
# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
|
||||
CONFIG_ARM_SMMU_V3=y
|
||||
# CONFIG_ARM_SMMU_V3_SVA is not set
|
||||
CONFIG_ARM_SP805_WATCHDOG=y
|
||||
CONFIG_ASM_MODVERSIONS=y
|
||||
CONFIG_ASN1=y
|
||||
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_AUDITSYSCALL=y
|
||||
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
|
||||
CONFIG_AUDIT_GENERIC=y
|
||||
CONFIG_AUTOFS_FS=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BALLOON_COMPACTION=y
|
||||
CONFIG_BATTERY_BQ27XXX=y
|
||||
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
|
||||
CONFIG_BATTERY_BQ27XXX_I2C=y
|
||||
CONFIG_BLK_CGROUP_PUNT_BIO=y
|
||||
CONFIG_BLK_DEV_BSG=y
|
||||
CONFIG_BLK_DEV_BSGLIB=y
|
||||
CONFIG_BLK_DEV_BSG_COMMON=y
|
||||
CONFIG_BLK_DEV_INTEGRITY=y
|
||||
CONFIG_BLK_DEV_INTEGRITY_T10=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=262144
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_BLK_MQ_VIRTIO=y
|
||||
CONFIG_BLK_PM=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_BSD_PROCESS_ACCT_V3=y
|
||||
CONFIG_BTRFS_FS=y
|
||||
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
|
||||
CONFIG_BTRFS_FS_POSIX_ACL=y
|
||||
CONFIG_BUFFER_HEAD=y
|
||||
CONFIG_BUILTIN_RETURN_ADDRESS_STRIPS_PAC=y
|
||||
CONFIG_CAVIUM_ERRATUM_22375=y
|
||||
CONFIG_CAVIUM_ERRATUM_23144=y
|
||||
CONFIG_CAVIUM_ERRATUM_23154=y
|
||||
CONFIG_CAVIUM_ERRATUM_27456=y
|
||||
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
|
||||
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
|
||||
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
|
||||
CONFIG_CC_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_CHECKPOINT_RESTORE=y
|
||||
CONFIG_CHROME_PLATFORMS=y
|
||||
CONFIG_CLK_LS1028A_PLLDIG=y
|
||||
CONFIG_CLK_QORIQ=y
|
||||
# CONFIG_CLK_VEXPRESS_OSC is not set
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CLZ_TAB=y
|
||||
CONFIG_CMA=y
|
||||
CONFIG_CMA_ALIGNMENT=8
|
||||
CONFIG_CMA_AREAS=7
|
||||
# CONFIG_CMA_DEBUG is not set
|
||||
# CONFIG_CMA_DEBUGFS is not set
|
||||
CONFIG_CMA_SIZE_MBYTES=16
|
||||
# CONFIG_CMA_SIZE_SEL_MAX is not set
|
||||
CONFIG_CMA_SIZE_SEL_MBYTES=y
|
||||
# CONFIG_CMA_SIZE_SEL_MIN is not set
|
||||
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
|
||||
# CONFIG_CMA_SYSFS is not set
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMMON_CLK_CS2000_CP=y
|
||||
CONFIG_COMMON_CLK_FSL_FLEXSPI=y
|
||||
# CONFIG_COMMON_CLK_FSL_SAI is not set
|
||||
CONFIG_COMMON_CLK_XGENE=y
|
||||
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
|
||||
CONFIG_COMPAT_32BIT_TIME=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_CONSOLE_TRANSLATIONS=y
|
||||
CONFIG_CONTEXT_TRACKING=y
|
||||
CONFIG_CONTEXT_TRACKING_IDLE=y
|
||||
CONFIG_CONTIG_ALLOC=y
|
||||
CONFIG_COREDUMP=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_CPUFREQ_DT_PLATDEV=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
|
||||
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_FREQ_THERMAL=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_MENU=y
|
||||
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MITIGATIONS=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_CRASH_CORE=y
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CRC64=y
|
||||
CONFIG_CRC64_ROCKSOFT=y
|
||||
CONFIG_CRC7=y
|
||||
CONFIG_CRC_CCITT=y
|
||||
CONFIG_CRC_ITU_T=y
|
||||
CONFIG_CRC_T10DIF=y
|
||||
CONFIG_CROSS_MEMORY_ATTACH=y
|
||||
# CONFIG_CROS_EC is not set
|
||||
CONFIG_CRYPTO_AES_ARM64=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
|
||||
CONFIG_CRYPTO_AUTHENC=y
|
||||
CONFIG_CRYPTO_BLAKE2B=y
|
||||
CONFIG_CRYPTO_CRC32=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
|
||||
CONFIG_CRYPTO_CRCT10DIF=y
|
||||
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
|
||||
CONFIG_CRYPTO_CRYPTD=y
|
||||
CONFIG_CRYPTO_CURVE25519=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_PRNG_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
|
||||
CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
|
||||
CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_ENGINE=y
|
||||
CONFIG_CRYPTO_GHASH_ARM64_CE=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
|
||||
CONFIG_CRYPTO_LIB_DES=y
|
||||
CONFIG_CRYPTO_LIB_GF128MUL=y
|
||||
CONFIG_CRYPTO_LIB_SHA1=y
|
||||
CONFIG_CRYPTO_LIB_SHA256=y
|
||||
CONFIG_CRYPTO_LIB_UTILS=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_RNG=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_RSA=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_CRYPTO_SHA256_ARM64=y
|
||||
CONFIG_CRYPTO_SHA2_ARM64_CE=y
|
||||
CONFIG_CRYPTO_XTS=y
|
||||
CONFIG_CRYPTO_XXHASH=y
|
||||
CONFIG_CRYPTO_ZSTD=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_MEMORY_INIT=y
|
||||
CONFIG_DECOMPRESS_BZIP2=y
|
||||
CONFIG_DECOMPRESS_GZIP=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DECOMPRESS_LZO=y
|
||||
CONFIG_DECOMPRESS_XZ=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_DIMLIB=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMATEST=y
|
||||
CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC=y
|
||||
CONFIG_DMA_CMA=y
|
||||
CONFIG_DMA_DIRECT_REMAP=y
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DMA_ENGINE_RAID=y
|
||||
# CONFIG_DMA_NUMA_CMA is not set
|
||||
CONFIG_DMA_OF=y
|
||||
CONFIG_DMA_OPS=y
|
||||
CONFIG_DMA_SHARED_BUFFER=y
|
||||
CONFIG_DMA_VIRTUAL_CHANNELS=y
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DPAA2_CONSOLE=y
|
||||
CONFIG_DPAA_ERRATUM_A050385=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_DT_IDLE_STATES=y
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_EXTCON=y
|
||||
CONFIG_EXTCON_USB_GPIO=y
|
||||
CONFIG_F2FS_FS=y
|
||||
CONFIG_FAILOVER=y
|
||||
CONFIG_FANOTIFY=y
|
||||
CONFIG_FAT_FS=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_ARMCLCD=y
|
||||
CONFIG_FB_CFB_COPYAREA=y
|
||||
CONFIG_FB_CFB_FILLRECT=y
|
||||
CONFIG_FB_CFB_IMAGEBLIT=y
|
||||
CONFIG_FB_CORE=y
|
||||
CONFIG_FB_DEFERRED_IO=y
|
||||
CONFIG_FB_IOMEM_FOPS=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_SYSMEM_HELPERS=y
|
||||
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
|
||||
CONFIG_FB_SYS_COPYAREA=y
|
||||
CONFIG_FB_SYS_FILLRECT=y
|
||||
CONFIG_FB_SYS_FOPS=y
|
||||
CONFIG_FB_SYS_IMAGEBLIT=y
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FONT_8x16=y
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_FONT_SUPPORT=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FREEZER=y
|
||||
# CONFIG_FSL_BMAN_TEST is not set
|
||||
CONFIG_FSL_DPAA=y
|
||||
CONFIG_FSL_DPAA2_ETH=y
|
||||
CONFIG_FSL_DPAA2_PTP_CLOCK=y
|
||||
# CONFIG_FSL_DPAA2_QDMA is not set
|
||||
# CONFIG_FSL_DPAA_CHECKING is not set
|
||||
CONFIG_FSL_DPAA_ETH=y
|
||||
CONFIG_FSL_EDMA=y
|
||||
CONFIG_FSL_ENETC=y
|
||||
CONFIG_FSL_ENETC_CORE=y
|
||||
CONFIG_FSL_ENETC_IERB=y
|
||||
CONFIG_FSL_ENETC_MDIO=y
|
||||
CONFIG_FSL_ENETC_PTP_CLOCK=y
|
||||
CONFIG_FSL_ENETC_VF=y
|
||||
CONFIG_FSL_ERRATUM_A008585=y
|
||||
CONFIG_FSL_FMAN=y
|
||||
CONFIG_FSL_GUTS=y
|
||||
CONFIG_FSL_IFC=y
|
||||
CONFIG_FSL_MC_BUS=y
|
||||
CONFIG_FSL_MC_DPIO=y
|
||||
CONFIG_FSL_MC_UAPI_SUPPORT=y
|
||||
# CONFIG_FSL_PPFE is not set
|
||||
# CONFIG_FSL_QMAN_TEST is not set
|
||||
CONFIG_FSL_RCPM=y
|
||||
CONFIG_FSL_XGMAC_MDIO=y
|
||||
CONFIG_FS_IOMAP=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_FUNCTION_ALIGNMENT=4
|
||||
CONFIG_FUNCTION_ALIGNMENT_4B=y
|
||||
CONFIG_FUSE_FS=y
|
||||
CONFIG_FWNODE_MDIO=y
|
||||
CONFIG_FW_CACHE=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
CONFIG_FW_LOADER_SYSFS=y
|
||||
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
|
||||
CONFIG_GARP=y
|
||||
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
|
||||
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ARCH_NUMA=y
|
||||
CONFIG_GENERIC_ARCH_TOPOLOGY=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
CONFIG_GENERIC_CPU_VULNERABILITIES=y
|
||||
CONFIG_GENERIC_CSUM=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_GETTIMEOFDAY=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IOREMAP=y
|
||||
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
||||
CONFIG_GENERIC_IRQ_MIGRATION=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
|
||||
CONFIG_GENERIC_MSI_IRQ=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
# CONFIG_GIANFAR is not set
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB_IRQCHIP=y
|
||||
CONFIG_GPIO_CDEV=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_GPIO_MPC8XXX=y
|
||||
CONFIG_GPIO_PCA953X=y
|
||||
CONFIG_GPIO_PCA953X_IRQ=y
|
||||
CONFIG_GRO_CELLS=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
CONFIG_HIBERNATE_CALLBACKS=y
|
||||
CONFIG_HIBERNATION=y
|
||||
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
|
||||
CONFIG_HOTPLUG_CORE_SYNC=y
|
||||
CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
|
||||
CONFIG_HOTPLUG_CPU=y
|
||||
CONFIG_HUGETLBFS=y
|
||||
CONFIG_HUGETLB_PAGE=y
|
||||
CONFIG_HVC_DRIVER=y
|
||||
CONFIG_HVC_IRQ=y
|
||||
CONFIG_HVC_XEN=y
|
||||
CONFIG_HVC_XEN_FRONTEND=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_COMPAT=y
|
||||
CONFIG_I2C_DESIGNWARE_CORE=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
CONFIG_I2C_HELPER_AUTO=y
|
||||
CONFIG_I2C_IMX=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_I2C_RK3X=y
|
||||
CONFIG_I2C_SLAVE=y
|
||||
# CONFIG_I2C_SLAVE_TESTUNIT is not set
|
||||
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
|
||||
CONFIG_IMX2_WDT=y
|
||||
CONFIG_INET_DIAG=y
|
||||
# CONFIG_INET_DIAG_DESTROY is not set
|
||||
# CONFIG_INET_RAW_DIAG is not set
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_INPUT=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_FF_MEMLESS=y
|
||||
CONFIG_INPUT_KEYBOARD=y
|
||||
CONFIG_INPUT_MOUSE=y
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
CONFIG_INPUT_VIVALDIFMAP=y
|
||||
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
|
||||
CONFIG_INTERVAL_TREE=y
|
||||
# CONFIG_IOMMUFD is not set
|
||||
CONFIG_IOMMU_API=y
|
||||
# CONFIG_IOMMU_DEBUGFS is not set
|
||||
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
|
||||
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
|
||||
CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
|
||||
CONFIG_IOMMU_DMA=y
|
||||
CONFIG_IOMMU_IOVA=y
|
||||
CONFIG_IOMMU_IO_PGTABLE=y
|
||||
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
|
||||
# CONFIG_IOMMU_IO_PGTABLE_DART is not set
|
||||
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
|
||||
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
|
||||
CONFIG_IOMMU_SUPPORT=y
|
||||
CONFIG_IPC_NS=y
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_BYPASS_MANAGER=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_MSI_IOMMU=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
# CONFIG_ISDN is not set
|
||||
CONFIG_JBD2=y
|
||||
CONFIG_JUMP_LABEL=y
|
||||
CONFIG_KALLSYMS=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_KCMP=y
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_KEXEC_CORE=y
|
||||
CONFIG_KEYBOARD_ATKBD=y
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
CONFIG_KSM=y
|
||||
CONFIG_LEGACY_DIRECT_IO=y
|
||||
CONFIG_LIBCRC32C=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_LOGO_LINUX_CLUT224=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_LS_EXTIRQ=y
|
||||
CONFIG_LS_SCFG_MSI=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_MDIO_BITBANG=y
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_BUS_MUX=y
|
||||
CONFIG_MDIO_BUS_MUX_MMIOREG=y
|
||||
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MDIO_DEVRES=y
|
||||
# CONFIG_MDIO_GPIO is not set
|
||||
CONFIG_MEMORY=y
|
||||
CONFIG_MEMORY_BALLOON=y
|
||||
CONFIG_MEMORY_ISOLATION=y
|
||||
CONFIG_MEMTEST=y
|
||||
# CONFIG_MFD_HI6421_SPMI is not set
|
||||
CONFIG_MFD_SYSCON=y
|
||||
# CONFIG_MFD_VEXPRESS_SYSREG is not set
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_MICROSEMI_PHY=y
|
||||
CONFIG_MIGRATION=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_BLOCK_MINORS=32
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
CONFIG_MMC_SDHCI_OF_ESDHC=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
|
||||
CONFIG_MMU_NOTIFIER=y
|
||||
CONFIG_MODULES_USE_ELF_RELA=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
# CONFIG_MOUSE_BCM5974 is not set
|
||||
# CONFIG_MOUSE_CYAPA is not set
|
||||
CONFIG_MOUSE_PS2=y
|
||||
CONFIG_MOUSE_PS2_ALPS=y
|
||||
CONFIG_MOUSE_PS2_BYD=y
|
||||
CONFIG_MOUSE_PS2_CYPRESS=y
|
||||
# CONFIG_MOUSE_PS2_ELANTECH is not set
|
||||
CONFIG_MOUSE_PS2_FOCALTECH=y
|
||||
CONFIG_MOUSE_PS2_LOGIPS2PP=y
|
||||
CONFIG_MOUSE_PS2_SMBUS=y
|
||||
CONFIG_MOUSE_PS2_SYNAPTICS=y
|
||||
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
|
||||
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
|
||||
CONFIG_MOUSE_PS2_TRACKPOINT=y
|
||||
# CONFIG_MOUSE_SERIAL is not set
|
||||
# CONFIG_MOUSE_VSXXXAA is not set
|
||||
CONFIG_MPILIB=y
|
||||
CONFIG_MRP=y
|
||||
CONFIG_MSCC_OCELOT_SWITCH_LIB=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
# CONFIG_MTD_CFI_GEOMETRY is not set
|
||||
CONFIG_MTD_CFI_STAA=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
# CONFIG_MTD_DATAFLASH_OTP is not set
|
||||
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
|
||||
CONFIG_MTD_NAND_FSL_IFC=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_SPI_NAND=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_SPLIT_FIT_FW=y
|
||||
CONFIG_MTD_SST25L=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MULTIPLEXER=y
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
CONFIG_MUX_MMIO=y
|
||||
CONFIG_MV_XOR_V2=y
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
|
||||
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
|
||||
CONFIG_NEED_SG_DMA_FLAGS=y
|
||||
CONFIG_NEED_SG_DMA_LENGTH=y
|
||||
CONFIG_NET_DEVLINK=y
|
||||
CONFIG_NET_DSA=y
|
||||
CONFIG_NET_DSA_MSCC_FELIX=y
|
||||
CONFIG_NET_DSA_MSCC_FELIX_DSA_LIB=y
|
||||
CONFIG_NET_DSA_TAG_OCELOT=y
|
||||
CONFIG_NET_DSA_TAG_OCELOT_8021Q=y
|
||||
CONFIG_NET_EGRESS=y
|
||||
CONFIG_NET_FAILOVER=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_INGRESS=y
|
||||
CONFIG_NET_NS=y
|
||||
CONFIG_NET_PTP_CLASSIFY=y
|
||||
CONFIG_NET_SELFTESTS=y
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_NET_XGRESS=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NODES_SHIFT=2
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_CPUS=64
|
||||
CONFIG_NUMA=y
|
||||
CONFIG_NUMA_BALANCING=y
|
||||
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
|
||||
CONFIG_NVMEM=y
|
||||
CONFIG_NVMEM_LAYERSCAPE_SFP=y
|
||||
CONFIG_NVMEM_LAYOUTS=y
|
||||
# CONFIG_NVMEM_SPMI_SDAM is not set
|
||||
CONFIG_NVMEM_SYSFS=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IOMMU=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_KOBJ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_NUMA=y
|
||||
CONFIG_PACKET_DIAG=y
|
||||
CONFIG_PACKING=y
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PAGE_POOL=y
|
||||
CONFIG_PAGE_REPORTING=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
|
||||
# CONFIG_PANIC_ON_OOPS is not set
|
||||
CONFIG_PANIC_ON_OOPS_VALUE=0
|
||||
CONFIG_PANIC_TIMEOUT=0
|
||||
CONFIG_PARAVIRT=y
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_PARTITION_PERCPU=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEASPM=y
|
||||
CONFIG_PCIEASPM_DEFAULT=y
|
||||
# CONFIG_PCIEASPM_PERFORMANCE is not set
|
||||
# CONFIG_PCIEASPM_POWERSAVE is not set
|
||||
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCIE_DW_HOST=y
|
||||
CONFIG_PCIE_LAYERSCAPE_GEN4=y
|
||||
CONFIG_PCIE_MOBIVEIL=y
|
||||
CONFIG_PCIE_MOBIVEIL_HOST=y
|
||||
CONFIG_PCIE_PME=y
|
||||
CONFIG_PCI_ATS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_ECAM=y
|
||||
CONFIG_PCI_HISI=y
|
||||
CONFIG_PCI_HOST_COMMON=y
|
||||
CONFIG_PCI_HOST_GENERIC=y
|
||||
CONFIG_PCI_IOV=y
|
||||
CONFIG_PCI_LAYERSCAPE=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCS_LYNX=y
|
||||
CONFIG_PER_VMA_LOCK=y
|
||||
CONFIG_PGTABLE_LEVELS=4
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYLIB_LEDS=y
|
||||
CONFIG_PHYLINK=y
|
||||
CONFIG_PHYS_ADDR_T_64BIT=y
|
||||
# CONFIG_PHY_FSL_LYNX_28G is not set
|
||||
CONFIG_PID_IN_CONTEXTIDR=y
|
||||
CONFIG_PID_NS=y
|
||||
CONFIG_PL330_DMA=y
|
||||
CONFIG_PM=y
|
||||
CONFIG_PM_CLK=y
|
||||
CONFIG_PM_OPP=y
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_PM_SLEEP_SMP=y
|
||||
CONFIG_PM_STD_PARTITION=""
|
||||
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
|
||||
CONFIG_POWER_RESET=y
|
||||
CONFIG_POWER_RESET_SYSCON=y
|
||||
CONFIG_POWER_RESET_VEXPRESS=y
|
||||
CONFIG_POWER_RESET_XGENE=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_PPS=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_PREEMPTION=y
|
||||
CONFIG_PREEMPT_BUILD=y
|
||||
CONFIG_PREEMPT_COUNT=y
|
||||
# CONFIG_PREEMPT_NONE is not set
|
||||
CONFIG_PREEMPT_RCU=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_PROC_CHILDREN=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_PTP_1588_CLOCK=y
|
||||
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
|
||||
CONFIG_PTP_1588_CLOCK_QORIQ=y
|
||||
CONFIG_QCOM_HIDMA=y
|
||||
CONFIG_QCOM_HIDMA_MGMT=y
|
||||
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
|
||||
# CONFIG_QFMT_V2 is not set
|
||||
CONFIG_QORIQ_CPUFREQ=y
|
||||
CONFIG_QORIQ_THERMAL=y
|
||||
CONFIG_QUEUED_RWLOCKS=y
|
||||
CONFIG_QUEUED_SPINLOCKS=y
|
||||
CONFIG_QUOTA=y
|
||||
CONFIG_QUOTACTL=y
|
||||
CONFIG_RAID6_PQ=y
|
||||
# CONFIG_RANDOMIZE_KSTACK_OFFSET is not set
|
||||
CONFIG_RANDSTRUCT_NONE=y
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_RD_BZIP2=y
|
||||
CONFIG_RD_GZIP=y
|
||||
CONFIG_RD_LZMA=y
|
||||
CONFIG_RD_LZO=y
|
||||
CONFIG_RD_XZ=y
|
||||
CONFIG_REALTEK_PHY=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_DS3232=y
|
||||
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
|
||||
CONFIG_RTC_DRV_PCF2127=y
|
||||
CONFIG_RTC_DRV_PL031=y
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
CONFIG_SCHED_INFO=y
|
||||
CONFIG_SCHED_MC=y
|
||||
CONFIG_SCHED_THERMAL_PRESSURE=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_COMMON=y
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
# CONFIG_SCSI_SAS_ATA is not set
|
||||
CONFIG_SCSI_SAS_ATTRS=y
|
||||
CONFIG_SCSI_SAS_HOST_SMP=y
|
||||
CONFIG_SCSI_SAS_LIBSAS=y
|
||||
CONFIG_SECCOMP=y
|
||||
CONFIG_SECCOMP_FILTER=y
|
||||
CONFIG_SECRETMEM=y
|
||||
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
|
||||
CONFIG_SERIAL_8250_DW=y
|
||||
CONFIG_SERIAL_8250_DWLIB=y
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_PCI=y
|
||||
CONFIG_SERIAL_8250_PCILIB=y
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_SERIAL_FSL_LPUART=y
|
||||
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
|
||||
CONFIG_SERIAL_MCTRL_GPIO=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SERIAL_SC16IS7XX=y
|
||||
CONFIG_SERIAL_SC16IS7XX_CORE=y
|
||||
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
|
||||
CONFIG_SERIAL_SC16IS7XX_SPI=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART=y
|
||||
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
|
||||
CONFIG_SERIO=y
|
||||
CONFIG_SERIO_AMBAKMI=y
|
||||
CONFIG_SERIO_LIBPS2=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SG_POOL=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SOCK_DIAG=y
|
||||
CONFIG_SOCK_RX_QUEUE_MAPPING=y
|
||||
CONFIG_SOC_BUS=y
|
||||
CONFIG_SOFTIRQ_ON_OWN_STACK=y
|
||||
CONFIG_SPARSEMEM=y
|
||||
CONFIG_SPARSEMEM_EXTREME=y
|
||||
CONFIG_SPARSEMEM_VMEMMAP=y
|
||||
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_FSL_DSPI=y
|
||||
CONFIG_SPI_FSL_QUADSPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_MEM=y
|
||||
CONFIG_SPI_NXP_FLEXSPI=y
|
||||
CONFIG_SPI_PL022=y
|
||||
CONFIG_SPMI=y
|
||||
# CONFIG_SPMI_HISI3670 is not set
|
||||
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
|
||||
CONFIG_SQUASHFS_FILE_CACHE=y
|
||||
# CONFIG_SQUASHFS_FILE_DIRECT is not set
|
||||
# CONFIG_SQUASHFS_XZ is not set
|
||||
CONFIG_SQUASHFS_ZLIB=y
|
||||
CONFIG_SRAM=y
|
||||
# CONFIG_STRIP_ASM_SYMS is not set
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_SUSPEND_FREEZER=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWIOTLB_XEN=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SYNC_FILE=y
|
||||
CONFIG_SYSCTL_EXCEPTION_TRACE=y
|
||||
CONFIG_SYSFS_SYSCALL=y
|
||||
CONFIG_SYS_HYPERVISOR=y
|
||||
CONFIG_TASKSTATS=y
|
||||
CONFIG_TASK_DELAY_ACCT=y
|
||||
CONFIG_TASK_IO_ACCOUNTING=y
|
||||
CONFIG_TASK_XACCT=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
||||
CONFIG_THERMAL_EMULATION=y
|
||||
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_OF=y
|
||||
CONFIG_THP_SWAP=y
|
||||
CONFIG_THREAD_INFO_IN_TASK=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TIMER_OF=y
|
||||
CONFIG_TIMER_PROBE=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
|
||||
CONFIG_TRANSPARENT_HUGEPAGE=y
|
||||
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
|
||||
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
|
||||
CONFIG_TRANS_TABLE=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TREE_SRCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
# CONFIG_UCLAMP_TASK is not set
|
||||
CONFIG_UIO=y
|
||||
CONFIG_UIO_AEC=y
|
||||
CONFIG_UIO_CIF=y
|
||||
CONFIG_UIO_DMEM_GENIRQ=y
|
||||
CONFIG_UIO_MF624=y
|
||||
CONFIG_UIO_NETX=y
|
||||
CONFIG_UIO_PCI_GENERIC=y
|
||||
CONFIG_UIO_PDRV_GENIRQ=y
|
||||
# CONFIG_UIO_PRUSS is not set
|
||||
CONFIG_UIO_SERCOS3=y
|
||||
CONFIG_UNINLINE_SPIN_UNLOCK=y
|
||||
CONFIG_UNIX_DIAG=y
|
||||
CONFIG_UNMAP_KERNEL_AT_EL0=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USER_NS=y
|
||||
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
|
||||
CONFIG_UTS_NS=y
|
||||
CONFIG_VEXPRESS_CONFIG=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_VFIO=y
|
||||
# CONFIG_VFIO_AMBA is not set
|
||||
CONFIG_VFIO_CONTAINER=y
|
||||
CONFIG_VFIO_FSL_MC=y
|
||||
CONFIG_VFIO_GROUP=y
|
||||
CONFIG_VFIO_IOMMU_TYPE1=y
|
||||
# CONFIG_VFIO_NOIOMMU is not set
|
||||
CONFIG_VFIO_PCI=y
|
||||
CONFIG_VFIO_PCI_CORE=y
|
||||
CONFIG_VFIO_PCI_INTX=y
|
||||
CONFIG_VFIO_PCI_MMAP=y
|
||||
CONFIG_VFIO_VIRQFD=y
|
||||
CONFIG_VGA_ARB=y
|
||||
CONFIG_VGA_ARB_MAX_GPUS=16
|
||||
CONFIG_VIDEOMODE_HELPERS=y
|
||||
CONFIG_VIDEO_CMDLINE=y
|
||||
CONFIG_VIRTIO=y
|
||||
CONFIG_VIRTIO_ANCHOR=y
|
||||
CONFIG_VIRTIO_BALLOON=y
|
||||
CONFIG_VIRTIO_BLK=y
|
||||
CONFIG_VIRTIO_CONSOLE=y
|
||||
# CONFIG_VIRTIO_IOMMU is not set
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_VIRTIO_NET=y
|
||||
CONFIG_VIRTIO_PCI=y
|
||||
CONFIG_VIRTIO_PCI_LEGACY=y
|
||||
CONFIG_VIRTIO_PCI_LIB=y
|
||||
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
|
||||
CONFIG_VITESSE_PHY=y
|
||||
CONFIG_VLAN_8021Q_GVRP=y
|
||||
CONFIG_VLAN_8021Q_MVRP=y
|
||||
CONFIG_VMAP_STACK=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_VT_CONSOLE_SLEEP=y
|
||||
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
|
||||
CONFIG_XARRAY_MULTI=y
|
||||
CONFIG_XEN=y
|
||||
CONFIG_XENFS=y
|
||||
CONFIG_XEN_AUTO_XLATE=y
|
||||
CONFIG_XEN_BACKEND=y
|
||||
CONFIG_XEN_BALLOON=y
|
||||
# CONFIG_XEN_BLKDEV_BACKEND is not set
|
||||
CONFIG_XEN_BLKDEV_FRONTEND=y
|
||||
CONFIG_XEN_COMPAT_XENFS=y
|
||||
CONFIG_XEN_DEV_EVTCHN=y
|
||||
CONFIG_XEN_DOM0=y
|
||||
CONFIG_XEN_FBDEV_FRONTEND=y
|
||||
CONFIG_XEN_GNTDEV=y
|
||||
CONFIG_XEN_GRANT_DEV_ALLOC=y
|
||||
# CONFIG_XEN_NETDEV_BACKEND is not set
|
||||
CONFIG_XEN_NETDEV_FRONTEND=y
|
||||
# CONFIG_XEN_PCIDEV_STUB is not set
|
||||
CONFIG_XEN_PRIVCMD=y
|
||||
# CONFIG_XEN_PVCALLS_BACKEND is not set
|
||||
# CONFIG_XEN_SCSI_FRONTEND is not set
|
||||
CONFIG_XEN_SYS_HYPERVISOR=y
|
||||
# CONFIG_XEN_VIRTIO is not set
|
||||
# CONFIG_XEN_WDT is not set
|
||||
CONFIG_XEN_XENBUS_FRONTEND=y
|
||||
CONFIG_XFS_FS=y
|
||||
CONFIG_XFS_POSIX_ACL=y
|
||||
CONFIG_XFS_RT=y
|
||||
CONFIG_XOR_BLOCKS=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XXHASH=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_ARMTHUMB=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_XZ_DEC_IA64=y
|
||||
CONFIG_XZ_DEC_POWERPC=y
|
||||
CONFIG_XZ_DEC_SPARC=y
|
||||
CONFIG_XZ_DEC_X86=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZONE_DMA32=y
|
||||
CONFIG_ZSTD_COMMON=y
|
||||
CONFIG_ZSTD_COMPRESS=y
|
||||
CONFIG_ZSTD_DECOMPRESS=y
|
||||
11
target/linux/layerscape/armv8_64b/target.mk
Normal file
11
target/linux/layerscape/armv8_64b/target.mk
Normal file
@@ -0,0 +1,11 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
#
|
||||
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
|
||||
|
||||
ARCH:=aarch64
|
||||
BOARDNAME:=ARMv8 64-bit based boards
|
||||
KERNELNAME:=Image dtbs
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for NXP Layerscape ARMv8 64-bit based boards.
|
||||
endef
|
||||
20
target/linux/layerscape/base-files/etc/board.d/01_led
Normal file
20
target/linux/layerscape/base-files/etc/board.d/01_led
Normal file
@@ -0,0 +1,20 @@
|
||||
#
|
||||
# Copyright (C) 2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
traverse,ten64)
|
||||
ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
|
||||
ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
20
target/linux/layerscape/base-files/etc/board.d/02_network
Normal file
20
target/linux/layerscape/base-files/etc/board.d/02_network
Normal file
@@ -0,0 +1,20 @@
|
||||
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
fsl,ls1028a-rdb|\
|
||||
fsl,ls1028a-rdb-sdboot)
|
||||
ucidef_set_interfaces_lan_wan "swp0 swp1 swp2 swp3" "eth0"
|
||||
;;
|
||||
traverse,ten64)
|
||||
ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
|
||||
ucidef_set_interface_wan "eth6"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,24 @@
|
||||
#
|
||||
# Copyright (C) 2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
traverse,ten64)
|
||||
ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "376"
|
||||
ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "377"
|
||||
ucidef_add_gpio_switch "lte_disable" "Cell Modem Airplane mode" "378"
|
||||
ucidef_add_gpio_switch "gnss_disable" "Cell Modem Disable GNSS receiver" "379"
|
||||
ucidef_add_gpio_switch "lower_sfp_txidsable" "Lower SFP+ TX Disable" "369"
|
||||
ucidef_add_gpio_switch "upper_sfp_txdisable" "Upper SFP+ TX Disable" "373"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,25 @@
|
||||
#
|
||||
# Copyright (C) 2020 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions.sh
|
||||
|
||||
case "$(board_name)" in
|
||||
fsl,ls1012a-frwy-sdboot | \
|
||||
fsl,ls1012a-rdb | \
|
||||
fsl,ls1021a-iot-sdboot | \
|
||||
fsl,ls1021a-twr | \
|
||||
fsl,ls1021a-twr-sdboot | \
|
||||
fsl,ls1043a-rdb | \
|
||||
fsl,ls1043a-rdb-sdboot | \
|
||||
fsl,ls1046a-rdb | \
|
||||
fsl,ls1046a-rdb-sdboot | \
|
||||
fsl,ls1088a-rdb | \
|
||||
fsl,ls1088a-rdb-sdboot | \
|
||||
fsl,ls2088a-rdb)
|
||||
uci set system.@system[0].compat_version="2.0"
|
||||
uci commit system
|
||||
;;
|
||||
esac
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,13 @@
|
||||
do_sysinfo_layerscape_fixup() {
|
||||
[ -e /tmp/sysinfo/board_name ] || return
|
||||
[ -e /proc/cmdline ] || return
|
||||
cmdline=$(strings /proc/cmdline)
|
||||
case "${cmdline}" in
|
||||
*root=/dev/mmcblk*)
|
||||
board="$(strings /tmp/sysinfo/board_name)-sdboot"
|
||||
echo ${board} > /tmp/sysinfo/board_name
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
boot_hook_add preinit_main do_sysinfo_layerscape_fixup
|
||||
@@ -0,0 +1,28 @@
|
||||
. /lib/functions.sh
|
||||
. /lib/upgrade/common.sh
|
||||
|
||||
BOOTPART=/dev/mmcblk0p1
|
||||
|
||||
move_config() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
fsl,ls1012a-frwy-sdboot | \
|
||||
fsl,ls1021a-iot-sdboot | \
|
||||
fsl,ls1021a-twr-sdboot | \
|
||||
fsl,ls1028a-rdb-sdboot | \
|
||||
fsl,ls1043a-rdb-sdboot | \
|
||||
fsl,ls1046a-frwy-sdboot | \
|
||||
fsl,ls1046a-rdb-sdboot | \
|
||||
fsl,ls1088a-rdb-sdboot)
|
||||
if [ -b $BOOTPART ]; then
|
||||
mkdir -p /boot
|
||||
mount -t ext4 -o rw,noatime $BOOTPART /boot 2>&1
|
||||
[ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" /
|
||||
umount /boot
|
||||
fi
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
boot_hook_add preinit_mount_root move_config
|
||||
163
target/linux/layerscape/base-files/lib/upgrade/platform.sh
Normal file
163
target/linux/layerscape/base-files/lib/upgrade/platform.sh
Normal file
@@ -0,0 +1,163 @@
|
||||
#
|
||||
# Copyright 2015-2019 Traverse Technologies
|
||||
# Copyright 2020 NXP
|
||||
#
|
||||
|
||||
RAMFS_COPY_BIN=""
|
||||
RAMFS_COPY_DATA=""
|
||||
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_do_upgrade_sdboot() {
|
||||
local diskdev partdev parttype=ext4
|
||||
local tar_file="$1"
|
||||
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
export_bootdevice && export_partdevice diskdev 0 || {
|
||||
echo "Unable to determine upgrade device"
|
||||
return 1
|
||||
}
|
||||
|
||||
if export_partdevice partdev 1; then
|
||||
mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt 2>&1
|
||||
echo "Writing kernel..."
|
||||
tar xf $tar_file ${board_dir}/kernel -O > /mnt/fitImage
|
||||
umount /mnt
|
||||
fi
|
||||
|
||||
echo "Erasing rootfs..."
|
||||
dd if=/dev/zero of=/dev/mmcblk0p2 bs=1M > /dev/null 2>&1
|
||||
echo "Writing rootfs..."
|
||||
tar xf $tar_file ${board_dir}/root -O | dd of=/dev/mmcblk0p2 bs=512k > /dev/null 2>&1
|
||||
|
||||
}
|
||||
|
||||
platform_do_upgrade_traverse_slotubi() {
|
||||
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
||||
echo "Active boot slot: ${part}"
|
||||
new_active_sys="b"
|
||||
|
||||
if [ ! -z "${part}" ]; then
|
||||
if [ "${part}" = "ubia" ]; then
|
||||
CI_UBIPART="ubib"
|
||||
else
|
||||
CI_UBIPART="ubia"
|
||||
new_active_sys="a"
|
||||
fi
|
||||
fi
|
||||
echo "Updating UBI part ${CI_UBIPART}"
|
||||
fw_setenv "openwrt_active_sys" "${new_active_sys}"
|
||||
nand_do_upgrade "$1"
|
||||
return $?
|
||||
}
|
||||
|
||||
platform_copy_config_sdboot() {
|
||||
local diskdev partdev parttype=ext4
|
||||
|
||||
export_bootdevice && export_partdevice diskdev 0 || {
|
||||
echo "Unable to determine upgrade device"
|
||||
return 1
|
||||
}
|
||||
|
||||
if export_partdevice partdev 1; then
|
||||
mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt 2>&1
|
||||
echo "Saving config backup..."
|
||||
cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
|
||||
umount /mnt
|
||||
fi
|
||||
}
|
||||
platform_copy_config() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
fsl,ls1012a-frwy-sdboot | \
|
||||
fsl,ls1021a-iot-sdboot | \
|
||||
fsl,ls1021a-twr-sdboot | \
|
||||
fsl,ls1028a-rdb-sdboot | \
|
||||
fsl,ls1043a-rdb-sdboot | \
|
||||
fsl,ls1046a-frwy-sdboot | \
|
||||
fsl,ls1046a-rdb-sdboot | \
|
||||
fsl,ls1088a-rdb-sdboot | \
|
||||
fsl,lx2160a-rdb-sdboot)
|
||||
platform_copy_config_sdboot
|
||||
;;
|
||||
esac
|
||||
}
|
||||
platform_check_image() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
traverse,ten64)
|
||||
nand_do_platform_check "ten64-mtd" $1
|
||||
return $?
|
||||
;;
|
||||
fsl,ls1012a-frdm | \
|
||||
fsl,ls1012a-frwy-sdboot | \
|
||||
fsl,ls1012a-rdb | \
|
||||
fsl,ls1021a-iot-sdboot | \
|
||||
fsl,ls1021a-twr | \
|
||||
fsl,ls1021a-twr-sdboot | \
|
||||
fsl,ls1028a-rdb | \
|
||||
fsl,ls1028a-rdb-sdboot | \
|
||||
fsl,ls1043a-rdb | \
|
||||
fsl,ls1043a-rdb-sdboot | \
|
||||
fsl,ls1046a-frwy | \
|
||||
fsl,ls1046a-frwy-sdboot | \
|
||||
fsl,ls1046a-rdb | \
|
||||
fsl,ls1046a-rdb-sdboot | \
|
||||
fsl,ls1088a-rdb | \
|
||||
fsl,ls1088a-rdb-sdboot | \
|
||||
fsl,ls2088a-rdb | \
|
||||
fsl,lx2160a-rdb | \
|
||||
fsl,lx2160a-rdb-sdboot)
|
||||
return 0
|
||||
;;
|
||||
*)
|
||||
echo "Sysupgrade is not currently supported on $board"
|
||||
;;
|
||||
esac
|
||||
|
||||
return 1
|
||||
}
|
||||
platform_do_upgrade() {
|
||||
local board=$(board_name)
|
||||
|
||||
# Force the creation of fw_printenv.lock
|
||||
mkdir -p /var/lock
|
||||
touch /var/lock/fw_printenv.lock
|
||||
|
||||
case "$board" in
|
||||
traverse,ten64)
|
||||
platform_do_upgrade_traverse_slotubi "${1}"
|
||||
;;
|
||||
fsl,ls1012a-frdm | \
|
||||
fsl,ls1012a-rdb | \
|
||||
fsl,ls1021a-twr | \
|
||||
fsl,ls1028a-rdb | \
|
||||
fsl,ls1043a-rdb | \
|
||||
fsl,ls1046a-frwy | \
|
||||
fsl,ls1046a-rdb | \
|
||||
fsl,ls1088a-rdb | \
|
||||
fsl,ls2088a-rdb | \
|
||||
fsl,lx2160a-rdb)
|
||||
PART_NAME=firmware
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
fsl,ls1012a-frwy-sdboot | \
|
||||
fsl,ls1021a-iot-sdboot | \
|
||||
fsl,ls1021a-twr-sdboot | \
|
||||
fsl,ls1028a-rdb-sdboot | \
|
||||
fsl,ls1043a-rdb-sdboot | \
|
||||
fsl,ls1046a-frwy-sdboot | \
|
||||
fsl,ls1046a-rdb-sdboot | \
|
||||
fsl,ls1088a-rdb-sdboot | \
|
||||
fsl,lx2160a-rdb-sdboot)
|
||||
platform_do_upgrade_sdboot "$1"
|
||||
return 0
|
||||
;;
|
||||
*)
|
||||
echo "Sysupgrade is not currently supported on $board"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
85
target/linux/layerscape/image/Makefile
Normal file
85
target/linux/layerscape/image/Makefile
Normal file
@@ -0,0 +1,85 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
#
|
||||
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
|
||||
|
||||
include $(TOPDIR)/rules.mk
|
||||
include $(INCLUDE_DIR)/image.mk
|
||||
|
||||
LS_SD_KERNELPART_SIZE = 40
|
||||
LS_SD_KERNELPART_OFFSET = 16
|
||||
LS_SD_ROOTFSPART_OFFSET = 64
|
||||
|
||||
ifeq ($(DUMP),)
|
||||
LS_SD_IMAGE_SIZE = $(shell echo $$((($(LS_SD_ROOTFSPART_OFFSET) + \
|
||||
$(CONFIG_TARGET_ROOTFS_PARTSIZE)))))
|
||||
endif
|
||||
|
||||
# The limitation of flash sysupgrade.bin is 1MB dtb + 16MB kernel + 32MB rootfs
|
||||
LS_SYSUPGRADE_IMAGE_SIZE = 49m
|
||||
|
||||
define Image/Prepare
|
||||
# Build .dtb for all boards we may run on
|
||||
$(foreach dts,$(DEVICE_DTS_LIST),
|
||||
$(call Image/BuildDTB,$(DTS_DIR)/$(dts).dts,$(DTS_DIR)/$(dts).dtb)
|
||||
)
|
||||
endef
|
||||
|
||||
define Build/ls-clean
|
||||
rm -f $@
|
||||
endef
|
||||
|
||||
define Build/ls-append
|
||||
dd if=$(STAGING_DIR_IMAGE)/$(1) >> $@
|
||||
endef
|
||||
|
||||
define Build/ls-append-dtb
|
||||
dd if=$(DEVICE_DTS_DIR)/$(1).dtb >> $@
|
||||
endef
|
||||
|
||||
define Build/ls-append-kernel
|
||||
mkdir -p $@.tmp && \
|
||||
cp $(IMAGE_KERNEL) $@.tmp/fitImage && \
|
||||
make_ext4fs -J -L kernel -l "$(LS_SD_KERNELPART_SIZE)M" \
|
||||
$(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
|
||||
"$@.kernel.part" "$@.tmp" && \
|
||||
dd if=$@.kernel.part >> $@ && \
|
||||
rm -rf $@.tmp && \
|
||||
rm -f $@.kernel.part
|
||||
endef
|
||||
|
||||
define Build/ls-append-sdhead
|
||||
./gen_sdcard_head_img.sh $(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img \
|
||||
$(LS_SD_KERNELPART_OFFSET) $(LS_SD_KERNELPART_SIZE) \
|
||||
$(LS_SD_ROOTFSPART_OFFSET) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
|
||||
dd if=$(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img >> $@
|
||||
endef
|
||||
|
||||
define Build/traverse-fit-ls1088
|
||||
./mkits-multiple-config.sh -o $@.its -A $(LINUX_KARCH) \
|
||||
-v $(LINUX_VERSION) -k $@ -a $(KERNEL_LOADADDR) \
|
||||
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
|
||||
-C gzip -c 1 -c 2 \
|
||||
-d $(DTS_DIR)/freescale/fsl-ls1088a-ten64.dtb \
|
||||
-D "TEN64" -n "ten64" -a $(FDT_LOADADDR) -c 1 \
|
||||
-d $(DTS_DIR)/freescale/fsl-ls1088a-rdb.dtb \
|
||||
-D "LS1088ARDB" -n "ls1088ardb" -a $(FDT_LOADADDR) -c 2
|
||||
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
|
||||
@mv -f $@.new $@
|
||||
endef
|
||||
|
||||
define Device/fix-sysupgrade
|
||||
DEVICE_COMPAT_VERSION := 2.0
|
||||
DEVICE_COMPAT_MESSAGE := DTB was added to sysupgrade. Image format is different. \
|
||||
To use sysupgrade You need to change firmware partition in bootargs to "49m@0xf00000(firmware)" and saveenv. \
|
||||
After that, You can use "sysupgrade -F".
|
||||
endef
|
||||
|
||||
define Device/rework-sdcard-images
|
||||
DEVICE_COMPAT_VERSION := 2.0
|
||||
DEVICE_COMPAT_MESSAGE := SD-card images were changed to squashfs + ext4 overlay combined images. \
|
||||
It is required to flash the entire sd-card again and manually copy config.
|
||||
endef
|
||||
|
||||
include $(SUBTARGET).mk
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
83
target/linux/layerscape/image/armv7.mk
Normal file
83
target/linux/layerscape/image/armv7.mk
Normal file
@@ -0,0 +1,83 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
#
|
||||
# Copyright 2018-2020 NXP
|
||||
|
||||
define Device/Default
|
||||
PROFILES := Default
|
||||
FILESYSTEMS := squashfs
|
||||
IMAGES := firmware.bin sysupgrade.bin
|
||||
ifdef CONFIG_LINUX_6_1
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)
|
||||
else
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/nxp/ls
|
||||
endif
|
||||
KERNEL := kernel-bin | uImage none
|
||||
KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DEVICE_DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
KERNEL_NAME := zImage
|
||||
KERNEL_LOADADDR := 0x80008000
|
||||
DEVICE_DTS = $(lastword $(subst _, ,$(1)))
|
||||
IMAGE_SIZE := 64m
|
||||
IMAGE/sysupgrade.bin = \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 1M | \
|
||||
append-kernel | pad-to 17M | \
|
||||
append-rootfs | pad-rootfs | \
|
||||
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
|
||||
endef
|
||||
|
||||
define Device/fsl-sdboot
|
||||
KERNEL = kernel-bin | gzip | fit gzip $$(DEVICE_DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
IMAGES := sdcard.img.gz sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
|
||||
define Device/fsl_ls1021a-twr
|
||||
$(Device/fix-sysupgrade)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := TWR-LS1021A
|
||||
DEVICE_VARIANT := Default
|
||||
DEVICE_PACKAGES += layerscape-rcw
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-rcw.bin | pad-to 1M | \
|
||||
ls-append $(1)-uboot.bin | pad-to 3M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to 32M | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1021a-twr
|
||||
|
||||
define Device/fsl_ls1021a-twr-sdboot
|
||||
$(Device/rework-sdcard-images)
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := TWR-LS1021A
|
||||
DEVICE_VARIANT := SD Card Boot
|
||||
DEVICE_DTS := ls1021a-twr
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 4K | \
|
||||
ls-append $(1)-uboot.bin | pad-to 3M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1021a-twr-sdboot
|
||||
|
||||
define Device/fsl_ls1021a-iot-sdboot
|
||||
$(Device/rework-sdcard-images)
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1021A-IoT
|
||||
DEVICE_VARIANT := SD Card Boot
|
||||
DEVICE_DTS := ls1021a-iot
|
||||
SUPPORTED_DEVICES :=
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 4K | \
|
||||
ls-append $(1)-uboot.bin | pad-to 1M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1021a-iot-sdboot
|
||||
450
target/linux/layerscape/image/armv8_64b.mk
Normal file
450
target/linux/layerscape/image/armv8_64b.mk
Normal file
@@ -0,0 +1,450 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
#
|
||||
# Copyright 2018-2020 NXP
|
||||
|
||||
define Device/Default
|
||||
PROFILES := Default
|
||||
IMAGES := firmware.bin sysupgrade.bin
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/freescale
|
||||
DEVICE_DTS = $(subst _,-,$(1))
|
||||
FILESYSTEMS := squashfs
|
||||
KERNEL := kernel-bin | gzip | uImage gzip
|
||||
KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DEVICE_DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
KERNEL_LOADADDR := 0x80000000
|
||||
IMAGE_SIZE := 64m
|
||||
IMAGE/sysupgrade.bin = \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 1M | \
|
||||
append-kernel | pad-to 17M | \
|
||||
append-rootfs | pad-rootfs | \
|
||||
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
|
||||
endef
|
||||
|
||||
define Device/fsl-sdboot
|
||||
KERNEL = kernel-bin | gzip | fit gzip $$(DEVICE_DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
IMAGES := sdcard.img.gz sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
|
||||
define Device/fsl_ls1012a-frdm
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := FRDM-LS1012A
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-ppfe \
|
||||
trusted-firmware-a-ls1012a-frdm \
|
||||
kmod-ppfe
|
||||
BLOCKSIZE := 256KiB
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
||||
ls-append pfe.itb | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to $$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
IMAGE/sysupgrade.bin := \
|
||||
append-kernel | pad-to $$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | \
|
||||
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
|
||||
KERNEL := kernel-bin | gzip | fit gzip $$(DEVICE_DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1012a-frdm
|
||||
|
||||
define Device/fsl_ls1012a-rdb
|
||||
$(Device/fix-sysupgrade)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1012A-RDB
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-ppfe \
|
||||
trusted-firmware-a-ls1012a-rdb \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-iio-fxas21002c-i2c \
|
||||
kmod-iio-fxos8700-i2c \
|
||||
kmod-ppfe
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
||||
ls-append pfe.itb | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to 32M | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1012a-rdb
|
||||
|
||||
define Device/fsl_ls1012a-frwy-sdboot
|
||||
$(Device/rework-sdcard-images)
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := FRWY-LS1012A
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-ppfe \
|
||||
trusted-firmware-a-ls1012a-frwy-sdboot \
|
||||
kmod-ppfe
|
||||
DEVICE_DTS := fsl-ls1012a-frwy
|
||||
IMAGES += firmware.bin
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 128K | \
|
||||
ls-append pfe.itb | pad-to 384K | \
|
||||
ls-append $(1)-fip.bin | pad-to 1856K | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 2048K | \
|
||||
check-size 2097153
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
|
||||
|
||||
define Device/fsl_ls1028a-rdb
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1028A-RDB
|
||||
DEVICE_VARIANT := Default
|
||||
KERNEL = kernel-bin | gzip | fit gzip $$(DEVICE_DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
DEVICE_PACKAGES += \
|
||||
trusted-firmware-a-ls1028a-rdb \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-hwmon-lm90 \
|
||||
kmod-rtc-pcf2127
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 16M | \
|
||||
append-kernel | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
IMAGE/sysupgrade.bin := \
|
||||
append-kernel | \
|
||||
append-rootfs | pad-rootfs | \
|
||||
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1028a-rdb
|
||||
|
||||
define Device/fsl_ls1028a-rdb-sdboot
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1028A-RDB
|
||||
DEVICE_VARIANT := SD Card Boot
|
||||
DEVICE_DTS := fsl-ls1028a-rdb
|
||||
DEVICE_PACKAGES += \
|
||||
trusted-firmware-a-ls1028a-rdb-sdboot \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-hwmon-lm90 \
|
||||
kmod-rtc-pcf2127
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 4K | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1028a-rdb-sdboot
|
||||
|
||||
define Device/fsl_ls1043a-rdb
|
||||
$(Device/fix-sysupgrade)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1043A-RDB
|
||||
DEVICE_VARIANT := Default
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-fman \
|
||||
trusted-firmware-a-ls1043a-rdb \
|
||||
fmc fmc-eth-config \
|
||||
kmod-ahci-qoriq \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-hwmon-lm90
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
||||
ls-append $(1)-fman.bin | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to 32M | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1043a-rdb
|
||||
|
||||
define Device/fsl_ls1043a-rdb-sdboot
|
||||
$(Device/rework-sdcard-images)
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1043A-RDB
|
||||
DEVICE_VARIANT := SD Card Boot
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-fman \
|
||||
trusted-firmware-a-ls1043a-rdb-sdboot \
|
||||
fmc fmc-eth-config \
|
||||
kmod-ahci-qoriq \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-hwmon-lm90
|
||||
DEVICE_DTS := fsl-ls1043a-rdb
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 4K | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
||||
ls-append fsl_ls1043a-rdb-fman.bin | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
|
||||
|
||||
define Device/fsl_ls1046a-frwy
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := FRWY-LS1046A
|
||||
DEVICE_VARIANT := Default
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-fman \
|
||||
trusted-firmware-a-ls1046a-frwy
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
||||
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to 32M | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1046a-frwy
|
||||
|
||||
define Device/fsl_ls1046a-frwy-sdboot
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := FRWY-LS1046A
|
||||
DEVICE_VARIANT := SD Card Boot
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-fman \
|
||||
trusted-firmware-a-ls1046a-frwy-sdboot
|
||||
DEVICE_DTS := fsl-ls1046a-frwy
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 4K | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
||||
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1046a-frwy-sdboot
|
||||
|
||||
define Device/fsl_ls1046a-rdb
|
||||
$(Device/fix-sysupgrade)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1046A-RDB
|
||||
DEVICE_VARIANT := Default
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-fman \
|
||||
trusted-firmware-a-ls1046a-rdb \
|
||||
fmc fmc-eth-config \
|
||||
kmod-ahci-qoriq \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-hwmon-lm90
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
||||
ls-append $(1)-fman.bin | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to 32M | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1046a-rdb
|
||||
|
||||
define Device/fsl_ls1046a-rdb-sdboot
|
||||
$(Device/rework-sdcard-images)
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1046A-RDB
|
||||
DEVICE_VARIANT := SD Card Boot
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-fman \
|
||||
trusted-firmware-a-ls1046a-rdb-sdboot \
|
||||
fmc fmc-eth-config \
|
||||
kmod-ahci-qoriq \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-hwmon-lm90
|
||||
DEVICE_DTS := fsl-ls1046a-rdb
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 4K | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
||||
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
|
||||
|
||||
define Device/fsl_ls1088a-rdb
|
||||
$(Device/fix-sysupgrade)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1088A-RDB
|
||||
DEVICE_VARIANT := Default
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-mc \
|
||||
layerscape-dpl \
|
||||
trusted-firmware-a-ls1088a-rdb \
|
||||
restool \
|
||||
kmod-ahci-qoriq \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-hwmon-lm90
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
||||
ls-append $(1)-mc.itb | pad-to 13M | \
|
||||
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
||||
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to 32M | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1088a-rdb
|
||||
|
||||
define Device/fsl_ls1088a-rdb-sdboot
|
||||
$(Device/rework-sdcard-images)
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS1088A-RDB
|
||||
DEVICE_VARIANT := SD Card Boot
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-mc \
|
||||
layerscape-dpl \
|
||||
trusted-firmware-a-ls1088a-rdb-sdboot \
|
||||
restool \
|
||||
kmod-ahci-qoriq \
|
||||
kmod-hwmon-ina2xx \
|
||||
kmod-hwmon-lm90
|
||||
DEVICE_DTS := fsl-ls1088a-rdb
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 4K | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
||||
ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
|
||||
ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
|
||||
ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
|
||||
|
||||
define Device/fsl_ls2088a-rdb
|
||||
$(Device/fix-sysupgrade)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LS2088ARDB
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-mc \
|
||||
layerscape-dpl \
|
||||
trusted-firmware-a-ls2088a-rdb \
|
||||
restool \
|
||||
kmod-ahci-qoriq
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
||||
ls-append $(1)-mc.itb | pad-to 13M | \
|
||||
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
||||
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to 32M | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
endef
|
||||
TARGET_DEVICES += fsl_ls2088a-rdb
|
||||
|
||||
define Device/fsl_lx2160a-rdb
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LX2160A-RDB
|
||||
DEVICE_VARIANT := Rev2.0 silicon
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-mc \
|
||||
layerscape-dpl \
|
||||
layerscape-ddr-phy \
|
||||
trusted-firmware-a-lx2160a-rdb \
|
||||
restool
|
||||
IMAGE/firmware.bin := \
|
||||
ls-clean | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 8M | \
|
||||
ls-append $(1)-fip_ddr_all.bin | pad-to 10M | \
|
||||
ls-append $(1)-mc.itb | pad-to 13M | \
|
||||
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
||||
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
||||
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
||||
append-kernel | pad-to 32M | \
|
||||
append-rootfs | pad-rootfs | check-size
|
||||
endef
|
||||
TARGET_DEVICES += fsl_lx2160a-rdb
|
||||
|
||||
define Device/fsl_lx2160a-rdb-sdboot
|
||||
$(Device/fsl-sdboot)
|
||||
DEVICE_VENDOR := NXP
|
||||
DEVICE_MODEL := LX2160A-RDB
|
||||
DEVICE_VARIANT := Rev2.0 silicon SD Card Boot
|
||||
DEVICE_PACKAGES += \
|
||||
layerscape-mc \
|
||||
layerscape-dpl \
|
||||
layerscape-ddr-phy \
|
||||
trusted-firmware-a-lx2160a-rdb-sdboot \
|
||||
restool
|
||||
DEVICE_DTS := fsl-lx2160a-rdb
|
||||
IMAGE/sdcard.img.gz := \
|
||||
ls-clean | \
|
||||
ls-append-sdhead $(1) | pad-to 4K | \
|
||||
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
||||
ls-append $(1)-fip.bin | pad-to 5M | \
|
||||
ls-append $(1)-uboot-env.bin | pad-to 8M | \
|
||||
ls-append fsl_lx2160a-rdb-fip_ddr_all.bin | pad-to 10M | \
|
||||
ls-append fsl_lx2160a-rdb-mc.itb | pad-to 13M | \
|
||||
ls-append fsl_lx2160a-rdb-dpl.dtb | pad-to 14M | \
|
||||
ls-append fsl_lx2160a-rdb-dpc.dtb | pad-to 16M | \
|
||||
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
||||
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
||||
endef
|
||||
TARGET_DEVICES += fsl_lx2160a-rdb-sdboot
|
||||
|
||||
define Device/traverse_ten64_mtd
|
||||
DEVICE_VENDOR := Traverse
|
||||
DEVICE_MODEL := Ten64 (NAND boot)
|
||||
DEVICE_NAME := ten64-mtd
|
||||
DEVICE_PACKAGES += \
|
||||
uboot-envtools \
|
||||
kmod-rtc-rx8025 \
|
||||
kmod-sfp \
|
||||
kmod-i2c-mux-pca954x \
|
||||
restool
|
||||
DEVICE_DESCRIPTION = \
|
||||
Generate images for booting from NAND/ubifs on Traverse Ten64 (LS1088A) \
|
||||
family boards. For disk (NVMe/USB/SD) boot, use the armvirt target instead.
|
||||
FILESYSTEMS := squashfs
|
||||
KERNEL_LOADADDR := 0x80000000
|
||||
KERNEL_ENTRY_POINT := 0x80000000
|
||||
FDT_LOADADDR := 0x90000000
|
||||
KERNEL_SUFFIX := -kernel.itb
|
||||
DEVICE_DTS := fsl-ls1088a-ten64
|
||||
IMAGES := nand.ubi sysupgrade.bin
|
||||
KERNEL := kernel-bin | gzip | traverse-fit-ls1088 gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/nand.ubi := append-ubi
|
||||
KERNEL_IN_UBI := 1
|
||||
BLOCKSIZE := 128KiB
|
||||
PAGESIZE := 2048
|
||||
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 600
|
||||
SUPPORTED_DEVICES = traverse,ten64
|
||||
endef
|
||||
TARGET_DEVICES += traverse_ten64_mtd
|
||||
|
||||
21
target/linux/layerscape/image/gen_sdcard_head_img.sh
Executable file
21
target/linux/layerscape/image/gen_sdcard_head_img.sh
Executable file
@@ -0,0 +1,21 @@
|
||||
#!/bin/sh
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
#
|
||||
# Copyright 2018 NXP
|
||||
|
||||
set -x
|
||||
[ $# -eq 5 ] || {
|
||||
echo "SYNTAX: $0 <file> <kernel part offset> <kernel size> <rootfs part offset> <rootfs size>"
|
||||
exit 1
|
||||
}
|
||||
|
||||
OUTPUT="$1"
|
||||
KERNELOFFSET="$(($2 * 1024))"
|
||||
KERNELSIZE="$3"
|
||||
ROOTFSOFFSET="$(($4 * 1024))"
|
||||
ROOTFSSIZE="$5"
|
||||
|
||||
head=4
|
||||
sect=63
|
||||
|
||||
set $(ptgen -o $OUTPUT -h $head -s $sect -t 83 -p ${KERNELSIZE}M@${KERNELOFFSET} -p ${ROOTFSSIZE}M@${ROOTFSOFFSET})
|
||||
600
target/linux/layerscape/image/mkits-multiple-config.sh
Executable file
600
target/linux/layerscape/image/mkits-multiple-config.sh
Executable file
@@ -0,0 +1,600 @@
|
||||
#!/usr/bin/env bash
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#
|
||||
# Author: Jason Wu <jason.hy.wu@gmail.com>
|
||||
# with modifications for multi-DTB-same-image by:
|
||||
# Mathew McBride <matt@traverse.com.au>
|
||||
#
|
||||
# U-Boot firmware supports the booting of images in the Flattened Image
|
||||
# Tree (FIT) format. The FIT format uses a device tree structure to
|
||||
# describe a kernel image, device tree blob, ramdisk, etc. This script
|
||||
# creates an Image Tree Source (.its file) which can be passed to the
|
||||
# 'mkimage' utility to generate an Image Tree Blob (.itb file). The .itb
|
||||
# file can then be booted by U-Boot (or other bootloaders which support
|
||||
# FIT images). See doc/uImage.FIT/howto.txt in U-Boot source code for
|
||||
# additional information on FIT images.
|
||||
#
|
||||
# This tools supports:
|
||||
# - multi-configuration
|
||||
# - multi-image support - multiple kernel/fdt/ramdsik
|
||||
# - per image configuration:
|
||||
# - hash algorithm and generated required subnodes
|
||||
# - compression
|
||||
# - signature and generated required subnodes
|
||||
#
|
||||
set -e
|
||||
|
||||
# image config limit
|
||||
MAX_IMG=50
|
||||
# conf config limit
|
||||
MAX_CONF=10
|
||||
|
||||
# declare main data array
|
||||
declare -a img_array
|
||||
declare -a conf_array
|
||||
|
||||
# initialize array with empty values
|
||||
for (( index=1; index<=$MAX_IMG; index++ )); do
|
||||
declare -a img$index
|
||||
for i in {0..13}; do
|
||||
eval img${index}[$i]=""
|
||||
done
|
||||
done
|
||||
|
||||
for (( index=1; index<=$MAX_CONF; index++ )); do
|
||||
declare -a conf$index
|
||||
for i in {0..9}; do
|
||||
eval conf${index}[$i]=""
|
||||
done
|
||||
done
|
||||
|
||||
# imgX array index information
|
||||
# 0: type of image - kernel, fdt, ramdsik
|
||||
# 1: image location
|
||||
# 2: image index
|
||||
# 3: loadaddr of image
|
||||
# 4: entrypoint of image
|
||||
# 5: compression
|
||||
# 6: hash algorithm
|
||||
# 7: part of the configuration
|
||||
# 8: Human friend name for the image
|
||||
# 9: key file name
|
||||
# 10: signature
|
||||
# 11: conf friendly name
|
||||
|
||||
# confX array index information
|
||||
# 0: conf number
|
||||
# 1: kernel conf
|
||||
# 2: fdt conf
|
||||
# 3: rootfs conf
|
||||
# 4: kernel key file
|
||||
# 5: fdt key file
|
||||
# 6: rootfs key file
|
||||
# 7: kernel sign_algorithm
|
||||
# 8: fdt sign_algorithm
|
||||
# 9: rootfs sign_algorithm
|
||||
# 10: conf friendly name
|
||||
|
||||
usage() {
|
||||
echo "Usage: `basename $0` -A arch -v version -o its_file" \
|
||||
"-k kernel -a addr -e entry [-C none] [-h sha1] [-c conf]"
|
||||
echo -e "Example1:\n\tkernel image ker_img1 with no compression +"
|
||||
echo -e "\tsha1 hash + fdt dtb1 with sha1 and crc32 hash for conf 1"
|
||||
echo -e "\t $ `basename $0` -A arm -v 4.4 \ "
|
||||
echo -e "\t -k ker_img1 -C none -h sha1 -e 0x8000 -a 0x8000 -c 1 \ "
|
||||
echo -e "\t -d dtb1 -h sha1 -h crc32 -c 1\n"
|
||||
echo "General settings:"
|
||||
echo -e "\t-A ==> set architecture to 'arch'"
|
||||
echo -e "\t-v ==> set kernel version to 'version'"
|
||||
echo -e "\t-o ==> create output file 'its_file' [optional]"
|
||||
echo "Input image type:"
|
||||
echo -e "\t-k ==> kernel image 'kernel'"
|
||||
echo -e "\t-d ==> Device Tree Blob 'dtb'"
|
||||
echo -e "\t-r ==> ramdisk image 'ramdisk"
|
||||
echo "Per image configurations:"
|
||||
echo -e "\t-C ==> set compression type 'comp'"
|
||||
echo -e "\t-c ==> set image config (multiple -c allowed)"
|
||||
echo -e "\t-a ==> set load address to 'addr' (hex)"
|
||||
echo -e "\t-e ==> set entry point to 'entry' (hex)"
|
||||
echo -e "\t-D ==> human friendly 'name' (one word only)"
|
||||
echo -e "\t-h ==> set hash algorithm (multiple -h allowed)"
|
||||
echo -e "\t-s ==> set signature for given config image"
|
||||
echo -e "\t-K ==> set key file for given config image"
|
||||
exit 1
|
||||
}
|
||||
|
||||
array_check()
|
||||
{
|
||||
local a=999
|
||||
local max_a=0
|
||||
local max_i=0
|
||||
|
||||
if echo $1 | grep -q img; then
|
||||
max_a=$MAX_IMG
|
||||
max_i=13
|
||||
let a=$(echo $1 | awk -F "img" '{print $2}')
|
||||
elif echo $1 | grep -q conf; then
|
||||
max_a=$MAX_CONF
|
||||
max_i=10
|
||||
let a=$(echo $1 | awk -F "conf" '{print $2}')
|
||||
fi
|
||||
if [ ${a} -lt 0 -o ${a} -gt ${max_a} -o \
|
||||
${2} -lt 0 -o ${2} -gt ${max_i} ]; then
|
||||
echo "WARNING: Invalid array name, skipping!!!"
|
||||
return 255
|
||||
fi
|
||||
}
|
||||
|
||||
#
|
||||
# $1: array name
|
||||
# $2: index
|
||||
# $3: value
|
||||
# $4: append operation
|
||||
#
|
||||
array_put()
|
||||
{
|
||||
# check if array is declared
|
||||
array_check $1 $2 || return 0
|
||||
if [ -z "$4" ]; then
|
||||
eval $1[$2]=$3
|
||||
else
|
||||
eval $1[$2]=\"\${$1[$2]} $3\"
|
||||
fi
|
||||
}
|
||||
|
||||
#
|
||||
# $1: array name
|
||||
# $2: index
|
||||
#
|
||||
array_get()
|
||||
{
|
||||
local val
|
||||
eval val=\${$1[$2]}
|
||||
echo $val
|
||||
}
|
||||
|
||||
parse_args() {
|
||||
local i=-1 k=-1 d=-1 r=-1
|
||||
while getopts ":A:a:C:c:D:d:e:h:k:K:o:v:r:s:n:" OPTION; do
|
||||
case $OPTION in
|
||||
A ) ARCH=$OPTARG;;
|
||||
a ) array_put img$i 3 $OPTARG;;
|
||||
C ) value_sanity_chk compression $OPTARG;
|
||||
array_put img$i 5 $OPTARG;;
|
||||
c ) array_put img$i 7 $OPTARG append;;
|
||||
D ) array_put img$i 8 $OPTARG;;
|
||||
d ) i=$(($i + 1));
|
||||
d=$(($d + 1));
|
||||
img_array[$i]=img$i;
|
||||
array_put img$i 0 fdt;
|
||||
array_put img$i 1 $OPTARG;
|
||||
array_put img$i 2 $d;
|
||||
;;
|
||||
e ) array_put img$i 4 $OPTARG;;
|
||||
h ) value_sanity_chk hash $OPTARG;
|
||||
array_put img$i 6 $OPTARG append;;
|
||||
k ) i=$(($i + 1));
|
||||
k=$(($k + 1));
|
||||
img_array[$i]=img$i;
|
||||
array_put img$i 0 "kernel";
|
||||
array_put img$i 1 $OPTARG;
|
||||
array_put img$i 2 $k;
|
||||
;;
|
||||
K ) array_put img$i 9 $OPTARG;;
|
||||
n ) array_put img$i 11 $OPTARG;;
|
||||
o ) OUTPUT=$OPTARG;;
|
||||
v ) VERSION=$OPTARG;;
|
||||
r ) i=$(($i + 1));
|
||||
r=$(($r + 1));
|
||||
img_array[$i]=img$i;
|
||||
array_put img$i 0 "ramdisk";
|
||||
array_put img$i 1 $OPTARG;
|
||||
array_put img$i 2 $r;
|
||||
;;
|
||||
s ) value_sanity_chk signature $OPTARG;
|
||||
array_put img$i 10 $OPTARG;
|
||||
;;
|
||||
* ) echo "Invalid option passed to '$0' (options:$@)"
|
||||
usage;;
|
||||
esac
|
||||
done
|
||||
shift $(($OPTIND - 1))
|
||||
[ $# -gt 0 ] && {
|
||||
echo "Failed to parse all passed arguments (unrecognized: \"$@\")"
|
||||
exit 1
|
||||
}
|
||||
[ -n "${OUTPUT}" ] || OUTPUT=fitimage.its
|
||||
[ -n "${VERSION}" ] || VERSION="Unknown"
|
||||
[ -n "${ARCH}" ] || ARCH=arm
|
||||
}
|
||||
|
||||
#
|
||||
# sanity check for signature, compression and hash
|
||||
#
|
||||
value_sanity_chk()
|
||||
{
|
||||
local valid=""
|
||||
case $1 in
|
||||
signature) valid="sha-1,rsa-2048 sha-256,rsa-2048 sha-256,rsa-4096";;
|
||||
compression) valid="gzip bzip2 none";;
|
||||
hash) valid="sha1 md5 crc32";;
|
||||
esac
|
||||
if ! echo $valid | grep -q "$2"; then
|
||||
echo "Error: Invalid $1 provided '$2'"
|
||||
echo "Valid options are: $valid"
|
||||
exit 255
|
||||
fi
|
||||
}
|
||||
|
||||
#
|
||||
# Emit the fitImage section bits
|
||||
#
|
||||
# $1: Section bit type: fitstart - its header
|
||||
# imagestart - image section start
|
||||
# confstart - configuration section start
|
||||
# sectend - section end
|
||||
# fitend - fitimage end
|
||||
# $2: optional variable for confstart section
|
||||
#
|
||||
emit_its() {
|
||||
case $1 in
|
||||
fitstart)
|
||||
cat << EOF > ${OUTPUT}
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
description = "U-Boot fitImage for ${VERSION} kernel";
|
||||
#address-cells = <1>;
|
||||
EOF
|
||||
;;
|
||||
imagestart)
|
||||
echo -e "\n\timages {" >> ${OUTPUT};;
|
||||
confstart)
|
||||
# echo -e "\tconfigurations {\n\t\tdefault = \"conf@${2:-0}\";" \
|
||||
echo -e "\tconfigurations {\n" \
|
||||
>> ${OUTPUT};;
|
||||
sectend)
|
||||
echo -e "\t};" >> ${OUTPUT};;
|
||||
fitend)
|
||||
echo -e "};" >> ${OUTPUT};;
|
||||
esac
|
||||
}
|
||||
|
||||
#
|
||||
# Emit kernel image node
|
||||
#
|
||||
emit_kernel() {
|
||||
local image=${1}
|
||||
local count=${2:-${MAX_IMG}}
|
||||
local loaddaddr=${3:-0x8000}
|
||||
local entrypoint=${4:-0x8000}
|
||||
local compresson=${5:-none}
|
||||
local checksum=${6:-sha1}
|
||||
local name=${7}
|
||||
|
||||
[ -z "${name}" ] || name=" ${name}"
|
||||
cat << EOF >> ${OUTPUT}
|
||||
kernel@${count} {
|
||||
description = "Linux Kernel${name}";
|
||||
data = /incbin/("${image}");
|
||||
type = "kernel";
|
||||
arch = "${ARCH}";
|
||||
os = "linux";
|
||||
compression = "${compresson}";
|
||||
load = <${loaddaddr}>;
|
||||
entry = <${entrypoint}>;
|
||||
EOF
|
||||
emit_cksum ${checksum}
|
||||
|
||||
if [ -z "$SIGN_IN_CONF" ] ; then
|
||||
emit_signature "$9" "" "" "$8" "" ""
|
||||
fi
|
||||
|
||||
echo " };" >> ${OUTPUT}
|
||||
}
|
||||
|
||||
#
|
||||
# Emit fdt node
|
||||
#
|
||||
emit_fdt() {
|
||||
local image=${1}
|
||||
local count=${2:-${MAX_IMG}}
|
||||
local compresson=${3:-none}
|
||||
local checksum=${4:-sha1}
|
||||
local name=${5}
|
||||
local loadaddr=${6}
|
||||
|
||||
[ -z "${name}" ] || name=" ${name}"
|
||||
cat << EOF >> ${OUTPUT}
|
||||
fdt@${count} {
|
||||
description = "Flattened Device Tree blob${name}";
|
||||
data = /incbin/("${image}");
|
||||
type = "flat_dt";
|
||||
arch = "${ARCH}";
|
||||
load = <${loadaddr}>;
|
||||
compression = "none";
|
||||
EOF
|
||||
emit_cksum ${checksum}
|
||||
if [ -z "$SIGN_IN_CONF" ] ; then
|
||||
emit_signature "" "$7" "" "" "$6" ""
|
||||
fi
|
||||
echo " };" >> ${OUTPUT}
|
||||
}
|
||||
|
||||
#
|
||||
# Emit ramdisk node
|
||||
#
|
||||
emit_ramdisk() {
|
||||
local image=${1}
|
||||
local count=${2:-${MAX_IMG}}
|
||||
local compresson=${3:-none}
|
||||
local checksum=${4:-sha1}
|
||||
local name=${5}
|
||||
|
||||
[ -z "${name}" ] || name=" ${name}"
|
||||
cat << EOF >> ${OUTPUT}
|
||||
ramdisk@${count} {
|
||||
description = "ramdisk${name}";
|
||||
data = /incbin/("${image}");
|
||||
type = "ramdisk";
|
||||
arch = "${ARCH}";
|
||||
os = "linux";
|
||||
compression = "${compresson}";
|
||||
EOF
|
||||
emit_cksum ${checksum}
|
||||
if [ -z "$SIGN_IN_CONF" ] ; then
|
||||
emit_signature "" "" "$7" "" "" "$6"
|
||||
fi
|
||||
echo " };" >> ${OUTPUT}
|
||||
}
|
||||
|
||||
#
|
||||
# Emit check sum sub node
|
||||
#
|
||||
emit_cksum() {
|
||||
csum_list=$@
|
||||
count=1
|
||||
for csum in ${csum_list}; do
|
||||
cat << EOF >> ${OUTPUT}
|
||||
hash@${count} {
|
||||
algo = "${csum}";
|
||||
};
|
||||
EOF
|
||||
count=`expr ${count} + 1`
|
||||
done
|
||||
}
|
||||
|
||||
#
|
||||
# Emit signature sub node
|
||||
#
|
||||
emit_signature() {
|
||||
local kernel=$1
|
||||
local fdt=$2
|
||||
local rootfs=$3
|
||||
local kernel_key=$4
|
||||
local fdt_key=$5
|
||||
local rootfs_key=$6
|
||||
local imgs=""
|
||||
local count=0
|
||||
local chk_list="" algo="" algos="" i=""
|
||||
|
||||
for i in kernel fdt rootfs; do
|
||||
eval algo=\$$i
|
||||
eval key=\$${i}_key
|
||||
[ -n "$algo" ] || continue
|
||||
if ! echo "$algos" | grep -q $algo; then
|
||||
if [ -z "$algos" ]; then
|
||||
algos=$algo
|
||||
else
|
||||
algos="${algos} $algo"
|
||||
fi
|
||||
fi
|
||||
if ! echo "$keys" | grep -q $key; then
|
||||
if [ -z "$keys" ]; then
|
||||
keys=$key
|
||||
else
|
||||
keys="${keys} $key"
|
||||
fi
|
||||
fi
|
||||
done
|
||||
|
||||
for algo in $algos; do
|
||||
for key in $keys; do
|
||||
img=""
|
||||
for i in kernel fdt rootfs; do
|
||||
eval tmp_algo=\$$i
|
||||
eval tmp_key=\$${i}_key
|
||||
[ "$tmp_algo" == "$algo" ] || continue
|
||||
[ "$tmp_key" == "$key" ] || continue
|
||||
if [ -z "$img" ]; then
|
||||
img=$i
|
||||
else
|
||||
img=${img},$i
|
||||
fi
|
||||
done
|
||||
|
||||
[ -n "$img" ] || continue
|
||||
cat << EOF >> ${OUTPUT}
|
||||
signature@${count} {
|
||||
algo = "${algo}";
|
||||
key-name-hint = "${key}";
|
||||
EOF
|
||||
if [ -n "$SIGN_IN_CONF" ] ; then
|
||||
echo " sign-images = \"$img\";" >> ${OUTPUT}
|
||||
fi
|
||||
echo " };" >> ${OUTPUT}
|
||||
|
||||
count=`expr ${count} + 1`
|
||||
done
|
||||
done
|
||||
}
|
||||
|
||||
#
|
||||
# Emit config sub nodes
|
||||
#
|
||||
emit_config() {
|
||||
local conf_csum="sha1"
|
||||
|
||||
config_name="conf@${1}"
|
||||
if [ ! -z "${11}" ]; then
|
||||
config_name="${11}"
|
||||
fi
|
||||
if [ -z "${2}" ]; then
|
||||
echo "Error: config has no kernel img, skipping conf node!"
|
||||
return 0
|
||||
fi
|
||||
|
||||
# Test if we have any DTBs at all
|
||||
if [ -z "${3}" ] ; then
|
||||
conf_desc="Boot Linux kernel"
|
||||
fdt_line=""
|
||||
else
|
||||
conf_desc="Boot Linux kernel with FDT blob"
|
||||
fdt_line="
|
||||
fdt = \"fdt@${3}\";"
|
||||
fi
|
||||
|
||||
# Test if we have any ROOTFS at all
|
||||
if [ -n "${4}" ] ; then
|
||||
conf_desc="$conf_desc + ramdisk"
|
||||
fdt_line="${fdt_line}
|
||||
ramdisk = \"ramdisk@${4}\";"
|
||||
fi
|
||||
|
||||
kernel_line="kernel = \"kernel@${2}\";"
|
||||
|
||||
cat << EOF >> ${OUTPUT}
|
||||
${config_name} {
|
||||
description = "${conf_desc}";
|
||||
${kernel_line}${fdt_line}
|
||||
hash@1 {
|
||||
algo = "${conf_csum}";
|
||||
};
|
||||
EOF
|
||||
if [ -n "$SIGN_IN_CONF" ] ; then
|
||||
emit_signature "$5" "$6" "$7" "$8" "$9" "${10}"
|
||||
fi
|
||||
|
||||
echo " };" >> ${OUTPUT}
|
||||
}
|
||||
|
||||
#
|
||||
# remove prefix space
|
||||
#
|
||||
remove_prefix_space()
|
||||
{
|
||||
echo "$@" | sed "s:^ ::g"
|
||||
}
|
||||
|
||||
#
|
||||
# generate image nodes and its subnodes
|
||||
#
|
||||
emit_image_nodes()
|
||||
{
|
||||
local t img_c img_i img_index chk
|
||||
local img_type img_path img_count img_loadadr img_entrypoint \
|
||||
img_compression img_hash img_conf img_name img_key img_sign \
|
||||
img_index
|
||||
|
||||
emit_its imagestart
|
||||
for t in "kernel" "fdt" "ramdisk"; do
|
||||
img_index=0
|
||||
for a in ${img_array[@]}; do
|
||||
img_type=$(array_get $a 0)
|
||||
img_path=$(array_get $a 1)
|
||||
img_count=$(array_get $a 2)
|
||||
img_loadadr=$(array_get $a 3)
|
||||
img_entrypoint=$(array_get $a 4)
|
||||
img_compression=$(array_get $a 5)
|
||||
img_hash=$(array_get $a 6)
|
||||
img_conf=$(array_get $a 7)
|
||||
img_name=$(array_get $a 8)
|
||||
img_key=$(array_get $a 9)
|
||||
img_sign=$(array_get $a 10)
|
||||
img_cname=$(array_get $a 11)
|
||||
|
||||
img_conf=$(remove_prefix_space $img_conf)
|
||||
img_hash=$(remove_prefix_space $img_hash)
|
||||
|
||||
[ "${img_type}" == $t ] || continue
|
||||
# generate sub nodes
|
||||
eval chk=\$DEF_$t
|
||||
[ -n "${chk}" ] || eval DEF_$t=$img_count
|
||||
case $t in
|
||||
kernel) emit_kernel "$img_path" "$img_count" \
|
||||
"$img_loadadr" "$img_entrypoint" \
|
||||
"$img_compression" "$img_hash" \
|
||||
"$img_name" "$img_key" "$img_sign";;
|
||||
fdt) emit_fdt "$img_path" "$img_count" \
|
||||
"$img_compression" "$img_hash" \
|
||||
"$img_name" "$img_loadadr" "$img_key" "$img_sign" ;;
|
||||
|
||||
ramdisk) emit_ramdisk "$img_path" "$img_count" \
|
||||
"$img_compression" "$img_hash" \
|
||||
"$img_name" "$img_key" "$img_sign";;
|
||||
esac
|
||||
|
||||
# set up configuration data
|
||||
for img_c in $img_conf; do
|
||||
img_i=""
|
||||
#set up default configuration if its not set
|
||||
[ -n "$DEF_CONFIG" ] || DEF_CONFIG=$img_c
|
||||
[ -z "${img_c}" ] || conf_array[$img_c]=conf$img_c
|
||||
array_put conf$img_c 0 ${img_c}
|
||||
case $t in
|
||||
kernel) img_i=1;;
|
||||
fdt) img_i=2;;
|
||||
ramdisk) img_i=3;;
|
||||
esac
|
||||
array_put conf$img_c $img_i $img_index
|
||||
array_put conf$img_c $(($img_i + 3)) ${img_sign}
|
||||
array_put conf$img_c $(($img_i + 6)) ${img_key}
|
||||
array_put conf$img_c 10 $img_cname
|
||||
done
|
||||
img_index=$((img_index + 1))
|
||||
done
|
||||
done
|
||||
emit_its sectend
|
||||
}
|
||||
|
||||
#
|
||||
# generate configuration node and its subnodes
|
||||
#
|
||||
emit_configuration_nodes ()
|
||||
{
|
||||
local count kernel fdt ramdisk ker_file fdt_file rfs_file ker_sign \
|
||||
fdt_sign rfs_sign
|
||||
emit_its confstart $DEF_CONFIG
|
||||
for a in ${conf_array[@]}; do
|
||||
count=$(array_get $a 0)
|
||||
kernel=$(array_get $a 1)
|
||||
fdt=$(array_get $a 2)
|
||||
ramdisk=$(array_get $a 3)
|
||||
er_file=$(array_get $a 4)
|
||||
fdt_file=$(array_get $a 5)
|
||||
rfs_file=$(array_get $a 6)
|
||||
ker_sign=$(array_get $a 7)
|
||||
fdt_sign=$(array_get $a 8)
|
||||
rfs_sign=$(array_get $a 9)
|
||||
cname=$(array_get $a 10)
|
||||
emit_config "$count" "$kernel" "$fdt" "$ramdisk" "$ker_file" \
|
||||
"$fdt_file" "$rfs_file" "$ker_sign" "$fdt_sign" \
|
||||
"$rfs_sign" "${cname}"
|
||||
done
|
||||
if [ -z "${DEF_CONFIG}" ]; then
|
||||
emit_config "0" "$DEF_kernel" "$DEF_fdt" "$DEF_ramdisk"
|
||||
fi
|
||||
emit_its sectend
|
||||
}
|
||||
|
||||
# Set to none empty to create signature sub node under images node
|
||||
SIGN_IN_CONF=${SIGN_IN_CONF:-""}
|
||||
# Set to default config used
|
||||
DEF_CONFIG=${DEF_CONFIG:-""}
|
||||
|
||||
parse_args $@
|
||||
|
||||
emit_its fitstart
|
||||
emit_image_nodes
|
||||
emit_configuration_nodes
|
||||
emit_its fitend
|
||||
35
target/linux/layerscape/modules.mk
Normal file
35
target/linux/layerscape/modules.mk
Normal file
@@ -0,0 +1,35 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
#
|
||||
# Copyright (C) Jiang Yutang <jiangyutang1978@gmail.com>
|
||||
|
||||
define KernelPackage/ahci-qoriq
|
||||
SUBMENU:=$(BLOCK_MENU)
|
||||
TITLE:=Freescale QorIQ AHCI SATA support
|
||||
KCONFIG:=CONFIG_AHCI_QORIQ
|
||||
FILES:=$(LINUX_DIR)/drivers/ata/ahci_qoriq.ko
|
||||
AUTOLOAD:=$(call AutoLoad,40,ahci-qoriq,1)
|
||||
$(call AddDepends/ata,+kmod-ata-ahci-platform @TARGET_layerscape)
|
||||
endef
|
||||
|
||||
define KernelPackage/ahci-qoriq/description
|
||||
This option enables support for the Freescale QorIQ AHCI SoC's
|
||||
onboard AHCI SATA.
|
||||
endef
|
||||
|
||||
$(eval $(call KernelPackage,ahci-qoriq))
|
||||
|
||||
define KernelPackage/ppfe
|
||||
SUBMENU:=$(NETWORK_DEVICES_MENU)
|
||||
TITLE:=Freescale PPFE Driver support
|
||||
DEPENDS:=@TARGET_layerscape
|
||||
KCONFIG:=CONFIG_FSL_PPFE \
|
||||
CONFIG_FSL_PPFE_UTIL_DISABLED=y
|
||||
FILES:=$(LINUX_DIR)/drivers/staging/fsl_ppfe/pfe.ko
|
||||
AUTOLOAD:=$(call AutoLoad,35,pfe)
|
||||
endef
|
||||
|
||||
define KernelPackage/ppfe/description
|
||||
Kernel modules for Freescale PPFE Driver support.
|
||||
endef
|
||||
|
||||
$(eval $(call KernelPackage,ppfe))
|
||||
@@ -0,0 +1,288 @@
|
||||
From 1bb35ff4ce33e65601c8d9c736be52e4aabd6252 Mon Sep 17 00:00:00 2001
|
||||
From: Calvin Johnson <calvin.johnson@nxp.com>
|
||||
Date: Sat, 16 Sep 2017 14:20:23 +0530
|
||||
Subject: [PATCH] arm64: dts: freescale: ls1012a: update with ppfe support
|
||||
|
||||
Update ls1012a dtsi and platform dts files with support for ppfe.
|
||||
|
||||
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
|
||||
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
|
||||
---
|
||||
.../boot/dts/freescale/fsl-ls1012a-frdm.dts | 43 +++++++++++++++++
|
||||
.../boot/dts/freescale/fsl-ls1012a-frwy.dts | 43 +++++++++++++++++
|
||||
.../boot/dts/freescale/fsl-ls1012a-qds.dts | 43 +++++++++++++++++
|
||||
.../boot/dts/freescale/fsl-ls1012a-rdb.dts | 47 +++++++++++++++++++
|
||||
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 29 ++++++++++++
|
||||
5 files changed, 205 insertions(+)
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
|
||||
@@ -14,6 +14,11 @@
|
||||
model = "LS1012A Freedom Board";
|
||||
compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
|
||||
|
||||
+ aliases {
|
||||
+ ethernet0 = &pfe_mac0;
|
||||
+ ethernet1 = &pfe_mac1;
|
||||
+ };
|
||||
+
|
||||
sys_mclk: clock-mclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
@@ -95,6 +100,44 @@
|
||||
};
|
||||
};
|
||||
|
||||
+&pfe {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ pfe_mac0: ethernet@0 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x0>; /* GEM_ID */
|
||||
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
|
||||
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "sgmii";
|
||||
+ fsl,pfe-phy-if-flags = <0x0>;
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ reg = <0x1>; /* enabled/disabled */
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pfe_mac1: ethernet@1 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x1>; /* GEM_ID */
|
||||
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
|
||||
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "sgmii";
|
||||
+ fsl,pfe-phy-if-flags = <0x0>;
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ reg = <0x0>; /* enabled/disabled */
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
|
||||
@@ -14,6 +14,11 @@
|
||||
/ {
|
||||
model = "LS1012A FRWY Board";
|
||||
compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &pfe_mac0;
|
||||
+ ethernet1 = &pfe_mac1;
|
||||
+ };
|
||||
};
|
||||
|
||||
&duart0 {
|
||||
@@ -28,6 +33,44 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
+&pfe {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ pfe_mac0: ethernet@0 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x0>; /* GEM_ID */
|
||||
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
|
||||
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "sgmii";
|
||||
+ fsl,pfe-phy-if-flags = <0x0>;
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ reg = <0x1>; /* enabled/disabled */
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pfe_mac1: ethernet@1 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x1>; /* GEM_ID */
|
||||
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
|
||||
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "sgmii";
|
||||
+ fsl,pfe-phy-if-flags = <0x0>;
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ reg = <0x0>; /* enabled/disabled */
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
||||
@@ -18,6 +18,11 @@
|
||||
mmc1 = &esdhc1;
|
||||
};
|
||||
|
||||
+ aliases {
|
||||
+ ethernet0 = &pfe_mac0;
|
||||
+ ethernet1 = &pfe_mac1;
|
||||
+ };
|
||||
+
|
||||
sys_mclk: clock-mclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
@@ -132,6 +137,44 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+&pfe {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ pfe_mac0: ethernet@0 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x0>; /* GEM_ID */
|
||||
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
|
||||
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
|
||||
+ fsl,mdio-mux-val = <0x2>;
|
||||
+ phy-mode = "sgmii-2500";
|
||||
+ fsl,pfe-phy-if-flags = <0x0>;
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ reg = <0x1>; /* enabled/disabled */
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pfe_mac1: ethernet@1 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x1>; /* GEM_ID */
|
||||
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
|
||||
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
|
||||
+ fsl,mdio-mux-val = <0x3>;
|
||||
+ phy-mode = "sgmii-2500";
|
||||
+ fsl,pfe-phy-if-flags = <0x0>;
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ reg = <0x0>; /* enabled/disabled */
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
|
||||
@@ -16,6 +16,8 @@
|
||||
|
||||
aliases {
|
||||
serial0 = &duart0;
|
||||
+ ethernet0 = &pfe_mac0;
|
||||
+ ethernet1 = &pfe_mac1;
|
||||
mmc0 = &esdhc0;
|
||||
mmc1 = &esdhc1;
|
||||
};
|
||||
@@ -86,6 +88,44 @@
|
||||
};
|
||||
};
|
||||
|
||||
+&pfe {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ pfe_mac0: ethernet@0 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x0>; /* GEM_ID */
|
||||
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
|
||||
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "sgmii";
|
||||
+ fsl,pfe-phy-if-flags = <0x0>;
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ reg = <0x1>; /* enabled/disabled */
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pfe_mac1: ethernet@1 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x1>; /* GEM_ID */
|
||||
+ fsl,gemac-bus-id = < 0x1 >; /* BUS_ID */
|
||||
+ fsl,gemac-phy-id = < 0x1 >; /* PHY_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "rgmii-txid";
|
||||
+ fsl,pfe-phy-if-flags = <0x0>;
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ reg = <0x0>; /* enabled/disabled */
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
|
||||
@@ -568,6 +568,35 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ reserved-memory {
|
||||
+ #address-cells = <2>;
|
||||
+ #size-cells = <2>;
|
||||
+ ranges;
|
||||
+
|
||||
+ pfe_reserved: packetbuffer@83400000 {
|
||||
+ reg = <0 0x83400000 0 0xc00000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pfe: pfe@04000000 {
|
||||
+ compatible = "fsl,pfe";
|
||||
+ reg = <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */
|
||||
+ <0x0 0x83400000 0x0 0xc00000>; /* PFE DDR 12M */
|
||||
+ reg-names = "pfe", "pfe-ddr";
|
||||
+ fsl,pfe-num-interfaces = <0x2>;
|
||||
+ interrupts = <0 172 0x4>, /* HIF interrupt */
|
||||
+ <0 173 0x4>, /*HIF_NOCPY interrupt */
|
||||
+ <0 174 0x4>; /* WoL interrupt */
|
||||
+ interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
|
||||
+ memory-region = <&pfe_reserved>;
|
||||
+ fsl,pfe-scfg = <&scfg 0>;
|
||||
+ fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
|
||||
+ clocks = <&clockgen 4 0>;
|
||||
+ clock-names = "pfe";
|
||||
+
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
firmware {
|
||||
optee {
|
||||
compatible = "linaro,optee-tz";
|
||||
@@ -0,0 +1,41 @@
|
||||
From 9c5c18dbf8e1845d349ef7020f8af5bc9b56ed1f Mon Sep 17 00:00:00 2001
|
||||
From: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
Date: Fri, 28 Sep 2022 17:14:32 +0200
|
||||
Subject: [PATCH] arm64: dts: ls1012a-frdm/qds: workaround by updating qspi flash to
|
||||
single mode
|
||||
|
||||
Update rx and tx bus-width to 1 to use single mode to workaround ubifs
|
||||
issue found with double mode. (The same method as RDB board)
|
||||
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 4 ++--
|
||||
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 4 ++--
|
||||
2 file changed, 4 insertions(+), 4 deletions(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
|
||||
@@ -148,8 +148,8 @@
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
reg = <0>;
|
||||
- spi-rx-bus-width = <2>;
|
||||
- spi-tx-bus-width = <2>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
+ spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
||||
@@ -186,8 +186,8 @@
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
reg = <0>;
|
||||
- spi-rx-bus-width = <2>;
|
||||
- spi-tx-bus-width = <2>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
+ spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
From 9c5c18dbf8e1845d349ef7020f8af5bc9b56ed1f Mon Sep 17 00:00:00 2001
|
||||
From: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
Date: Tue, 7 Jan 2020 17:14:32 +0530
|
||||
Subject: [PATCH] arm64: dts: ls1012a-rdb: workaround by updating qspi flash to
|
||||
single mode
|
||||
|
||||
Update rx and tx bus-width to 1 to use single mode to workaround ubifs
|
||||
issue found with double mode.
|
||||
|
||||
[ Leo: Local workaround ]
|
||||
|
||||
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
---
|
||||
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 4 ++--
|
||||
1 file changed, 2 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
|
||||
@@ -136,8 +136,8 @@
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
reg = <0>;
|
||||
- spi-rx-bus-width = <2>;
|
||||
- spi-tx-bus-width = <2>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
+ spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -0,0 +1,34 @@
|
||||
From 38093ebbf25eb60a1aa863f46118a68a0300c56e Mon Sep 17 00:00:00 2001
|
||||
From: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
Date: Fri, 3 Jan 2020 14:49:07 +0530
|
||||
Subject: [PATCH] arm64: dts: ls1046a-rdb: Update qspi spi-rx-bus-width to 1
|
||||
|
||||
Update rx width from quad mode to single mode as a workaround.
|
||||
|
||||
[Leo: Local workaround ]
|
||||
|
||||
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
---
|
||||
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
|
||||
1 file changed, 2 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
|
||||
@@ -104,7 +104,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
- spi-rx-bus-width = <4>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
spi-tx-bus-width = <1>;
|
||||
reg = <0>;
|
||||
};
|
||||
@@ -114,7 +114,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
- spi-rx-bus-width = <4>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
spi-tx-bus-width = <1>;
|
||||
reg = <1>;
|
||||
};
|
||||
@@ -0,0 +1,27 @@
|
||||
From 20b1193c8c1d81a8d44ae36e579f70e6fbab45b9 Mon Sep 17 00:00:00 2001
|
||||
From: Han Xu <han.xu@nxp.com>
|
||||
Date: Tue, 14 Apr 2020 11:58:44 -0500
|
||||
Subject: [PATCH] LF-20-3 mtd: spi-nor: Use 1 bit mode of spansion(s25fs512s)
|
||||
flash
|
||||
|
||||
This is a workaround patch which uses only single bit mode of s25fs512s
|
||||
flash
|
||||
|
||||
Signed-off-by: Han Xu <han.xu@nxp.com>
|
||||
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
---
|
||||
drivers/mtd/spi-nor/spansion.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/mtd/spi-nor/spansion.c
|
||||
+++ b/drivers/mtd/spi-nor/spansion.c
|
||||
@@ -398,8 +398,8 @@ static const struct flash_info spansion_
|
||||
MFR_FLAGS(USE_CLSR)
|
||||
},
|
||||
{ "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256)
|
||||
- NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
|
||||
MFR_FLAGS(USE_CLSR)
|
||||
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
|
||||
.fixups = &s25fs_s_nor_fixups, },
|
||||
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64) },
|
||||
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256) },
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,54 @@
|
||||
From fd32b1bc9a49919d3d59a50d775d03fe7ca5e654 Mon Sep 17 00:00:00 2001
|
||||
From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
|
||||
Date: Wed, 29 Nov 2017 15:27:57 +0530
|
||||
Subject: [PATCH] phy: Add 2.5G SGMII interface mode
|
||||
|
||||
Add 2.5G SGMII interface mode(PHY_INTERFACE_MODE_2500SGMII)
|
||||
in existing phy_interface list
|
||||
|
||||
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
|
||||
---
|
||||
drivers/net/phy/phy-core.c | 1 +
|
||||
drivers/net/phy/phylink.c | 1 +
|
||||
include/linux/phy.h | 3 +++
|
||||
3 files changed, 5 insertions(+)
|
||||
|
||||
--- a/drivers/net/phy/phy-core.c
|
||||
+++ b/drivers/net/phy/phy-core.c
|
||||
@@ -136,6 +136,7 @@ int phy_interface_num_ports(phy_interfac
|
||||
case PHY_INTERFACE_MODE_RXAUI:
|
||||
case PHY_INTERFACE_MODE_XAUI:
|
||||
case PHY_INTERFACE_MODE_1000BASEKX:
|
||||
+ case PHY_INTERFACE_MODE_2500SGMII:
|
||||
return 1;
|
||||
case PHY_INTERFACE_MODE_QSGMII:
|
||||
case PHY_INTERFACE_MODE_QUSGMII:
|
||||
--- a/drivers/net/phy/phylink.c
|
||||
+++ b/drivers/net/phy/phylink.c
|
||||
@@ -231,6 +231,7 @@ static int phylink_interface_max_speed(p
|
||||
return SPEED_1000;
|
||||
|
||||
case PHY_INTERFACE_MODE_2500BASEX:
|
||||
+ case PHY_INTERFACE_MODE_2500SGMII:
|
||||
return SPEED_2500;
|
||||
|
||||
case PHY_INTERFACE_MODE_5GBASER:
|
||||
--- a/include/linux/phy.h
|
||||
+++ b/include/linux/phy.h
|
||||
@@ -159,6 +159,7 @@ typedef enum {
|
||||
PHY_INTERFACE_MODE_10GKR,
|
||||
PHY_INTERFACE_MODE_QUSGMII,
|
||||
PHY_INTERFACE_MODE_1000BASEKX,
|
||||
+ PHY_INTERFACE_MODE_2500SGMII,
|
||||
PHY_INTERFACE_MODE_MAX,
|
||||
} phy_interface_t;
|
||||
|
||||
@@ -280,6 +281,8 @@ static inline const char *phy_modes(phy_
|
||||
return "100base-x";
|
||||
case PHY_INTERFACE_MODE_QUSGMII:
|
||||
return "qusgmii";
|
||||
+ case PHY_INTERFACE_MODE_2500SGMII:
|
||||
+ return "sgmii-2500";
|
||||
default:
|
||||
return "unknown";
|
||||
}
|
||||
@@ -0,0 +1,239 @@
|
||||
From 1dc3a2e216d99adc2df022ab37eab32f61d80e0e Mon Sep 17 00:00:00 2001
|
||||
From: Christian Marangi <ansuelsmth@gmail.com>
|
||||
Date: Mon, 8 May 2023 19:26:48 +0200
|
||||
Subject: [PATCH] layerscape: 6.1: fix compilation warning for fsl ppfe driver
|
||||
|
||||
Rework some desc dump and dummy pkt function to fix compilation warning.
|
||||
Fix compilation warning:
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c: In function 'send_dummy_pkt_to_hif':
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:118:19: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
|
||||
118 | ddr_ptr = (void *)((u64)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:122:20: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
|
||||
122 | lmem_ptr = (void *)((u64)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c: In function 'pfe_hif_desc_dump':
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:195:24: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
|
||||
195 | desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:195:36: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
|
||||
195 | desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:207:19: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
|
||||
207 | desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:207:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
|
||||
207 | desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
| ^
|
||||
cc1: all warnings being treated as errors
|
||||
|
||||
In file included from ./include/linux/kernel.h:19,
|
||||
from ./include/linux/list.h:9,
|
||||
from ./include/linux/wait.h:7,
|
||||
from ./include/linux/eventfd.h:13,
|
||||
from drivers/staging/fsl_ppfe/pfe_cdev.c:11:
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c: In function 'pfe_cdev_read':
|
||||
./include/linux/kern_levels.h:5:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'int' [-Werror=format=]
|
||||
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:422:25: note: in definition of macro 'printk_index_wrap'
|
||||
422 | _p_func(_fmt, ##__VA_ARGS__); \
|
||||
| ^~~~
|
||||
./include/linux/printk.h:132:17: note: in expansion of macro 'printk'
|
||||
132 | printk(fmt, ##__VA_ARGS__); \
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:580:9: note: in expansion of macro 'no_printk'
|
||||
580 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~~
|
||||
./include/linux/kern_levels.h:15:25: note: in expansion of macro 'KERN_SOH'
|
||||
15 | #define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
|
||||
| ^~~~~~~~
|
||||
./include/linux/printk.h:580:19: note: in expansion of macro 'KERN_DEBUG'
|
||||
580 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c:42:17: note: in expansion of macro 'pr_debug'
|
||||
42 | pr_debug("%u %lu", link_states[ret].phy_id,
|
||||
| ^~~~~~~~
|
||||
./include/linux/kern_levels.h:5:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
|
||||
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:422:25: note: in definition of macro 'printk_index_wrap'
|
||||
422 | _p_func(_fmt, ##__VA_ARGS__); \
|
||||
| ^~~~
|
||||
./include/linux/printk.h:493:9: note: in expansion of macro 'printk'
|
||||
493 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~
|
||||
./include/linux/kern_levels.h:11:25: note: in expansion of macro 'KERN_SOH'
|
||||
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
|
||||
| ^~~~~~~~
|
||||
./include/linux/printk.h:493:16: note: in expansion of macro 'KERN_ERR'
|
||||
493 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c:50:17: note: in expansion of macro 'pr_err'
|
||||
50 | pr_err("Failed to send (%d)bytes of (%lu) requested.\n",
|
||||
| ^~~~~~
|
||||
./include/linux/kern_levels.h:5:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'unsigned int' [-Werror=format=]
|
||||
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:422:25: note: in definition of macro 'printk_index_wrap'
|
||||
422 | _p_func(_fmt, ##__VA_ARGS__); \
|
||||
| ^~~~
|
||||
./include/linux/printk.h:132:17: note: in expansion of macro 'printk'
|
||||
132 | printk(fmt, ##__VA_ARGS__); \
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:580:9: note: in expansion of macro 'no_printk'
|
||||
580 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~~
|
||||
./include/linux/kern_levels.h:15:25: note: in expansion of macro 'KERN_SOH'
|
||||
15 | #define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
|
||||
| ^~~~~~~~
|
||||
./include/linux/printk.h:580:19: note: in expansion of macro 'KERN_DEBUG'
|
||||
580 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c:57:9: note: in expansion of macro 'pr_debug'
|
||||
57 | pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states));
|
||||
| ^~~~~~~~
|
||||
cc1: all warnings being treated as errors
|
||||
|
||||
In file included from ./include/uapi/linux/posix_types.h:5,
|
||||
from ./include/uapi/linux/types.h:14,
|
||||
from ./include/linux/types.h:6,
|
||||
from ./include/linux/list.h:5,
|
||||
from ./include/linux/module.h:12,
|
||||
from drivers/staging/fsl_ppfe/pfe_sysfs.c:7:
|
||||
drivers/staging/fsl_ppfe/pfe_sysfs.c: In function 'pfe_set_util':
|
||||
./include/linux/stddef.h:8:14: error: passing argument 2 of 'kstrtoul' makes integer from pointer without a cast [-Werror=int-conversion]
|
||||
8 | #define NULL ((void *)0)
|
||||
| ^~~~~~~~~~~
|
||||
| |
|
||||
| void *
|
||||
drivers/staging/fsl_ppfe/pfe_sysfs.c:538:39: note: in expansion of macro 'NULL'
|
||||
538 | util_do_clear = kstrtoul(buf, NULL, 0);
|
||||
| ^~~~
|
||||
In file included from ./include/linux/kernel.h:13,
|
||||
from ./include/linux/list.h:9:
|
||||
./include/linux/kstrtox.h:30:69: note: expected 'unsigned int' but argument is of type 'void *'
|
||||
30 | static inline int __must_check kstrtoul(const char *s, unsigned int base, unsigned long *res)
|
||||
| ~~~~~~~~~~~~~^~~~
|
||||
cc1: all warnings being treated as errors
|
||||
|
||||
With UTIL compiled on, fix compilation warning:
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c: In function 'pe_load_ddr_section':
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:617:19: error: 'else' without a previous 'if'
|
||||
617 | } else {
|
||||
| ^~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:622:17: error: break statement not within loop or switch
|
||||
622 | break;
|
||||
| ^~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:624:9: error: case label not within a switch statement
|
||||
624 | case SHT_NOBITS:
|
||||
| ^~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:627:17: error: break statement not within loop or switch
|
||||
627 | break;
|
||||
| ^~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:629:9: error: 'default' label not within a switch statement
|
||||
629 | default:
|
||||
| ^~~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c: At top level:
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:635:9: error: expected identifier or '(' before 'return'
|
||||
635 | return 0;
|
||||
| ^~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:636:1: error: expected identifier or '(' before '}' token
|
||||
636 | }
|
||||
|
||||
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c | 6 +++---
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c | 14 +++++++-------
|
||||
drivers/staging/fsl_ppfe/pfe_sysfs.c | 2 +-
|
||||
3 files changed, 11 insertions(+), 11 deletions(-)
|
||||
|
||||
--- a/drivers/staging/fsl_ppfe/pfe_cdev.c
|
||||
+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c
|
||||
@@ -34,7 +34,7 @@ static ssize_t pfe_cdev_read(struct file
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
- pr_info("PFE CDEV attempt copying (%lu) size of user.\n",
|
||||
+ pr_info("PFE CDEV attempt copying (%zu) size of user.\n",
|
||||
sizeof(link_states));
|
||||
|
||||
pr_debug("Dump link_state on screen before copy_to_user\n");
|
||||
@@ -47,14 +47,14 @@ static ssize_t pfe_cdev_read(struct file
|
||||
/* Copy to user the value in buffer sized len */
|
||||
ret = copy_to_user(buf, &link_states, sizeof(link_states));
|
||||
if (ret != 0) {
|
||||
- pr_err("Failed to send (%d)bytes of (%lu) requested.\n",
|
||||
+ pr_err("Failed to send (%d)bytes of (%zu) requested.\n",
|
||||
ret, len);
|
||||
return -EFAULT;
|
||||
}
|
||||
|
||||
/* offset set back to 0 as there is contextual reading offset */
|
||||
*off = 0;
|
||||
- pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states));
|
||||
+ pr_debug("Read of (%zu) bytes performed.\n", sizeof(link_states));
|
||||
|
||||
return sizeof(link_states);
|
||||
}
|
||||
--- a/drivers/staging/fsl_ppfe/pfe_hif.c
|
||||
+++ b/drivers/staging/fsl_ppfe/pfe_hif.c
|
||||
@@ -115,11 +115,11 @@ static void send_dummy_pkt_to_hif(void)
|
||||
0x33221100, 0xa8c05544, 0x00000301, 0x00000000,
|
||||
0x00000000, 0x00000000, 0x00000000, 0xbe86c51f };
|
||||
|
||||
- ddr_ptr = (void *)((u64)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
+ ddr_ptr = (void *)((uintptr_t)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
if (!ddr_ptr)
|
||||
return;
|
||||
|
||||
- lmem_ptr = (void *)((u64)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
+ lmem_ptr = (void *)((uintptr_t)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
if (!lmem_ptr)
|
||||
return;
|
||||
|
||||
@@ -186,16 +186,16 @@ static void pfe_hif_free_descr(struct pf
|
||||
void pfe_hif_desc_dump(struct pfe_hif *hif)
|
||||
{
|
||||
struct hif_desc *desc;
|
||||
- unsigned long desc_p;
|
||||
+ u64 desc_p;
|
||||
int ii = 0;
|
||||
|
||||
pr_info("%s\n", __func__);
|
||||
|
||||
desc = hif->rx_base;
|
||||
- desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
+ desc_p = ((void *)desc - hif->descr_baseaddr_v +
|
||||
hif->descr_baseaddr_p);
|
||||
|
||||
- pr_info("HIF Rx desc base %p physical %x\n", desc, (u32)desc_p);
|
||||
+ pr_info("HIF Rx desc base %p physical %llx\n", desc, desc_p);
|
||||
for (ii = 0; ii < hif->rx_ring_size; ii++) {
|
||||
pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
|
||||
readl(&desc->status), readl(&desc->ctrl),
|
||||
@@ -204,10 +204,10 @@ void pfe_hif_desc_dump(struct pfe_hif *h
|
||||
}
|
||||
|
||||
desc = hif->tx_base;
|
||||
- desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
+ desc_p = ((void *)desc - hif->descr_baseaddr_v +
|
||||
hif->descr_baseaddr_p);
|
||||
|
||||
- pr_info("HIF Tx desc base %p physical %x\n", desc, (u32)desc_p);
|
||||
+ pr_info("HIF Tx desc base %p physical %llx\n", desc, desc_p);
|
||||
for (ii = 0; ii < hif->tx_ring_size; ii++) {
|
||||
pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
|
||||
readl(&desc->status), readl(&desc->ctrl),
|
||||
--- a/drivers/staging/fsl_ppfe/pfe_sysfs.c
|
||||
+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c
|
||||
@@ -535,7 +535,7 @@ static ssize_t pfe_show_tmu3_queues(stru
|
||||
static ssize_t pfe_set_util(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
- util_do_clear = kstrtoul(buf, NULL, 0);
|
||||
+ util_do_clear = kstrtoul(buf, 0, 0);
|
||||
return count;
|
||||
}
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
From eb57941154e2ad142c07d47e874a221328467349 Mon Sep 17 00:00:00 2001
|
||||
From: Ioana Ciornei <ioana.ciornei@nxp.com>
|
||||
Date: Thu, 2 Jun 2022 12:11:11 +0300
|
||||
Subject: [PATCH] net: phylink: treat PHY_INTERFACE_MODE_2500SGMII in
|
||||
phylink_get_linkmodes
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
There is a downstream patch which adds a new interface type -
|
||||
PHY_INTERFACE_MODE_2500SGMII (which is really the same one as
|
||||
PHY_INTERFACE_MODE_2500BASEX).
|
||||
|
||||
We backported from upstream the following phylink patch which, of
|
||||
course, does not treat the PHY_INTERFACE_MODE_2500SGMII interface mode
|
||||
in a switch case statement.
|
||||
34ae2c09d46a ("net: phylink: add generic validate implementation")
|
||||
|
||||
Because of this, we get the following build warning.
|
||||
|
||||
drivers/net/phy/phylink.c: In function ‘phylink_get_linkmodes’:
|
||||
drivers/net/phy/phylink.c:322:2: warning: enumeration value ‘PHY_INTERFACE_MODE_2500SGMII’ not handled in switch [-Wswitch]
|
||||
322 | switch (interface) {
|
||||
| ^~~~~~
|
||||
|
||||
Fix it by treating the new interface mode in the switch-case statement.
|
||||
|
||||
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
|
||||
---
|
||||
drivers/net/phy/phylink.c | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
--- a/drivers/net/phy/phylink.c
|
||||
+++ b/drivers/net/phy/phylink.c
|
||||
@@ -518,6 +518,7 @@ unsigned long phylink_get_capabilities(p
|
||||
break;
|
||||
|
||||
case PHY_INTERFACE_MODE_2500BASEX:
|
||||
+ case PHY_INTERFACE_MODE_2500SGMII:
|
||||
caps |= MAC_2500FD;
|
||||
break;
|
||||
|
||||
@@ -0,0 +1,228 @@
|
||||
From 008465a02bf29b366ca7a56dba48ad3a85417ba2 Mon Sep 17 00:00:00 2001
|
||||
From: Li Yang <leoyang.li@nxp.com>
|
||||
Date: Thu, 18 Nov 2021 21:46:21 -0600
|
||||
Subject: [PATCH] arm64: dts: ls1012a: add ppfe support to boards
|
||||
|
||||
Update ls1012a dtsi and platform dts files with
|
||||
support for ppfe.
|
||||
|
||||
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
|
||||
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
|
||||
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
||||
---
|
||||
.../boot/dts/freescale/fsl-ls1012a-frdm.dts | 44 +++++++++++++++++++
|
||||
.../boot/dts/freescale/fsl-ls1012a-qds.dts | 43 ++++++++++++++++++
|
||||
.../boot/dts/freescale/fsl-ls1012a-rdb.dts | 40 +++++++++++++++++
|
||||
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 29 ++++++++++++
|
||||
4 files changed, 156 insertions(+)
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
|
||||
@@ -14,6 +14,11 @@
|
||||
model = "LS1012A Freedom Board";
|
||||
compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
|
||||
|
||||
+ aliases {
|
||||
+ ethernet0 = &pfe_mac0;
|
||||
+ ethernet1 = &pfe_mac1;
|
||||
+ };
|
||||
+
|
||||
sys_mclk: clock-mclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
@@ -110,6 +115,45 @@
|
||||
};
|
||||
};
|
||||
|
||||
+&pfe {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ pfe_mac0: ethernet@0 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x0>; /* GEM_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "sgmii";
|
||||
+ phy-handle = <&sgmii_phy1>;
|
||||
+ };
|
||||
+
|
||||
+ pfe_mac1: ethernet@1 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x1>; /* GEM_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "sgmii";
|
||||
+ phy-handle = <&sgmii_phy2>;
|
||||
+ };
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ sgmii_phy1: ethernet-phy@2 {
|
||||
+ reg = <0x2>;
|
||||
+ };
|
||||
+
|
||||
+ sgmii_phy2: ethernet-phy@1 {
|
||||
+ reg = <0x1>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&sai2 {
|
||||
status = "okay";
|
||||
};
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
||||
@@ -16,6 +16,8 @@
|
||||
aliases {
|
||||
mmc0 = &esdhc0;
|
||||
mmc1 = &esdhc1;
|
||||
+ ethernet0 = &pfe_mac0;
|
||||
+ ethernet1 = &pfe_mac1;
|
||||
};
|
||||
|
||||
sys_mclk: clock-mclk {
|
||||
@@ -148,6 +150,47 @@
|
||||
};
|
||||
};
|
||||
|
||||
+&pfe {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ pfe_mac0: ethernet@0 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x0>; /* GEM_ID */
|
||||
+ fsl,mdio-mux-val = <0x2>;
|
||||
+ phy-mode = "sgmii-2500";
|
||||
+ phy-handle = <&sgmii_phy1>;
|
||||
+ };
|
||||
+
|
||||
+ pfe_mac1: ethernet@1 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x1>; /* GEM_ID */
|
||||
+ fsl,mdio-mux-val = <0x3>;
|
||||
+ phy-mode = "sgmii-2500";
|
||||
+ phy-handle = <&sgmii_phy2>;
|
||||
+ };
|
||||
+
|
||||
+ mdio@0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ sgmii_phy1: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c45";
|
||||
+ reg = <0x1>;
|
||||
+ };
|
||||
+
|
||||
+ sgmii_phy2: ethernet-phy@2 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c45";
|
||||
+ reg = <0x2>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&sai2 {
|
||||
status = "okay";
|
||||
};
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
|
||||
@@ -18,6 +18,8 @@
|
||||
serial0 = &duart0;
|
||||
mmc0 = &esdhc0;
|
||||
mmc1 = &esdhc1;
|
||||
+ ethernet0 = &pfe_mac0;
|
||||
+ ethernet1 = &pfe_mac1;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -104,3 +106,41 @@
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
+
|
||||
+&pfe {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ pfe_mac0: ethernet@0 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x0>; /* GEM_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "sgmii";
|
||||
+ phy-handle = <&sgmii_phy>;
|
||||
+ };
|
||||
+
|
||||
+ pfe_mac1: ethernet@1 {
|
||||
+ compatible = "fsl,pfe-gemac-port";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x1>; /* GEM_ID */
|
||||
+ fsl,mdio-mux-val = <0x0>;
|
||||
+ phy-mode = "rgmii-id";
|
||||
+ phy-handle = <&rgmii_phy>;
|
||||
+ };
|
||||
+ mdio@0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ sgmii_phy: ethernet-phy@2 {
|
||||
+ reg = <0x2>;
|
||||
+ };
|
||||
+
|
||||
+ rgmii_phy: ethernet-phy@1 {
|
||||
+ reg = <0x1>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
|
||||
@@ -568,6 +568,35 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ reserved-memory {
|
||||
+ #address-cells = <2>;
|
||||
+ #size-cells = <2>;
|
||||
+ ranges;
|
||||
+
|
||||
+ pfe_reserved: packetbuffer@83400000 {
|
||||
+ reg = <0 0x83400000 0 0xc00000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pfe: pfe@4000000 {
|
||||
+ compatible = "fsl,pfe";
|
||||
+ reg = <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */
|
||||
+ <0x0 0x83400000 0x0 0xc00000>; /* PFE DDR 12M */
|
||||
+ reg-names = "pfe", "pfe-ddr";
|
||||
+ fsl,pfe-num-interfaces = <0x2>;
|
||||
+ interrupts = <0 172 0x4>, /* HIF interrupt */
|
||||
+ <0 173 0x4>, /*HIF_NOCPY interrupt */
|
||||
+ <0 174 0x4>; /* WoL interrupt */
|
||||
+ interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
|
||||
+ memory-region = <&pfe_reserved>;
|
||||
+ fsl,pfe-scfg = <&scfg 0>;
|
||||
+ fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
|
||||
+ clocks = <&clockgen 4 0>;
|
||||
+ clock-names = "pfe";
|
||||
+
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
firmware {
|
||||
optee {
|
||||
compatible = "linaro,optee-tz";
|
||||
@@ -0,0 +1,41 @@
|
||||
From 9c5c18dbf8e1845d349ef7020f8af5bc9b56ed1f Mon Sep 17 00:00:00 2001
|
||||
From: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
Date: Fri, 28 Sep 2022 17:14:32 +0200
|
||||
Subject: [PATCH] arm64: dts: ls1012a-frdm/qds: workaround by updating qspi flash to
|
||||
single mode
|
||||
|
||||
Update rx and tx bus-width to 1 to use single mode to workaround ubifs
|
||||
issue found with double mode. (The same method as RDB board)
|
||||
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 4 ++--
|
||||
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 4 ++--
|
||||
2 file changed, 4 insertions(+), 4 deletions(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
|
||||
@@ -110,8 +110,8 @@
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
reg = <0>;
|
||||
- spi-rx-bus-width = <2>;
|
||||
- spi-tx-bus-width = <2>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
+ spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
||||
@@ -145,8 +145,8 @@
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
reg = <0>;
|
||||
- spi-rx-bus-width = <2>;
|
||||
- spi-tx-bus-width = <2>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
+ spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
From 9c5c18dbf8e1845d349ef7020f8af5bc9b56ed1f Mon Sep 17 00:00:00 2001
|
||||
From: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
Date: Tue, 7 Jan 2020 17:14:32 +0530
|
||||
Subject: [PATCH] arm64: dts: ls1012a-rdb: workaround by updating qspi flash to
|
||||
single mode
|
||||
|
||||
Update rx and tx bus-width to 1 to use single mode to workaround ubifs
|
||||
issue found with double mode.
|
||||
|
||||
[ Leo: Local workaround ]
|
||||
|
||||
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
---
|
||||
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 4 ++--
|
||||
1 file changed, 2 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
|
||||
@@ -98,8 +98,8 @@
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
reg = <0>;
|
||||
- spi-rx-bus-width = <2>;
|
||||
- spi-tx-bus-width = <2>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
+ spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -0,0 +1,34 @@
|
||||
From 38093ebbf25eb60a1aa863f46118a68a0300c56e Mon Sep 17 00:00:00 2001
|
||||
From: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
Date: Fri, 3 Jan 2020 14:49:07 +0530
|
||||
Subject: [PATCH] arm64: dts: ls1046a-rdb: Update qspi spi-rx-bus-width to 1
|
||||
|
||||
Update rx width from quad mode to single mode as a workaround.
|
||||
|
||||
[Leo: Local workaround ]
|
||||
|
||||
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
---
|
||||
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
|
||||
1 file changed, 2 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
|
||||
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
|
||||
@@ -104,7 +104,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
- spi-rx-bus-width = <4>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
spi-tx-bus-width = <1>;
|
||||
reg = <0>;
|
||||
};
|
||||
@@ -114,7 +114,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
- spi-rx-bus-width = <4>;
|
||||
+ spi-rx-bus-width = <1>;
|
||||
spi-tx-bus-width = <1>;
|
||||
reg = <1>;
|
||||
};
|
||||
@@ -0,0 +1,27 @@
|
||||
From bd3fa0b0ed51dd6a6564c01d37b36ff475f87ed4 Mon Sep 17 00:00:00 2001
|
||||
From: Han Xu <han.xu@nxp.com>
|
||||
Date: Tue, 14 Apr 2020 11:58:44 -0500
|
||||
Subject: [PATCH] LF-20-3 mtd: spi-nor: Use 1 bit mode of spansion(s25fs512s)
|
||||
flash
|
||||
|
||||
This is a workaround patch which uses only single bit mode of s25fs512s
|
||||
flash
|
||||
|
||||
Signed-off-by: Han Xu <han.xu@nxp.com>
|
||||
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
|
||||
---
|
||||
drivers/mtd/spi-nor/spansion.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/mtd/spi-nor/spansion.c
|
||||
+++ b/drivers/mtd/spi-nor/spansion.c
|
||||
@@ -798,8 +798,8 @@ static const struct flash_info spansion_
|
||||
MFR_FLAGS(USE_CLSR)
|
||||
},
|
||||
{ "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256)
|
||||
- NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
|
||||
MFR_FLAGS(USE_CLSR)
|
||||
+ FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
|
||||
.fixups = &s25fs_s_nor_fixups, },
|
||||
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64) },
|
||||
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256) },
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,62 @@
|
||||
From 3823e4e1078a95e26b9a69e88c9bf862b0267e1c Mon Sep 17 00:00:00 2001
|
||||
From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
|
||||
Date: Wed, 29 Nov 2017 15:27:57 +0530
|
||||
Subject: [PATCH] phy: Add 2.5G SGMII interface mode
|
||||
|
||||
Add 2.5G SGMII interface mode(PHY_INTERFACE_MODE_2500SGMII)
|
||||
in existing phy_interface list
|
||||
|
||||
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
|
||||
---
|
||||
drivers/net/phy/phy-core.c | 1 +
|
||||
drivers/net/phy/phylink.c | 2 ++
|
||||
include/linux/phy.h | 3 +++
|
||||
3 files changed, 6 insertions(+)
|
||||
|
||||
--- a/drivers/net/phy/phy-core.c
|
||||
+++ b/drivers/net/phy/phy-core.c
|
||||
@@ -138,6 +138,7 @@ int phy_interface_num_ports(phy_interfac
|
||||
case PHY_INTERFACE_MODE_RXAUI:
|
||||
case PHY_INTERFACE_MODE_XAUI:
|
||||
case PHY_INTERFACE_MODE_1000BASEKX:
|
||||
+ case PHY_INTERFACE_MODE_2500SGMII:
|
||||
return 1;
|
||||
case PHY_INTERFACE_MODE_QSGMII:
|
||||
case PHY_INTERFACE_MODE_QUSGMII:
|
||||
--- a/drivers/net/phy/phylink.c
|
||||
+++ b/drivers/net/phy/phylink.c
|
||||
@@ -231,6 +231,7 @@ static int phylink_interface_max_speed(p
|
||||
return SPEED_1000;
|
||||
|
||||
case PHY_INTERFACE_MODE_2500BASEX:
|
||||
+ case PHY_INTERFACE_MODE_2500SGMII:
|
||||
return SPEED_2500;
|
||||
|
||||
case PHY_INTERFACE_MODE_5GBASER:
|
||||
@@ -539,6 +540,7 @@ unsigned long phylink_get_capabilities(p
|
||||
break;
|
||||
|
||||
case PHY_INTERFACE_MODE_2500BASEX:
|
||||
+ case PHY_INTERFACE_MODE_2500SGMII:
|
||||
caps |= MAC_2500FD;
|
||||
break;
|
||||
|
||||
--- a/include/linux/phy.h
|
||||
+++ b/include/linux/phy.h
|
||||
@@ -165,6 +165,7 @@ typedef enum {
|
||||
PHY_INTERFACE_MODE_10GKR,
|
||||
PHY_INTERFACE_MODE_QUSGMII,
|
||||
PHY_INTERFACE_MODE_1000BASEKX,
|
||||
+ PHY_INTERFACE_MODE_2500SGMII,
|
||||
PHY_INTERFACE_MODE_MAX,
|
||||
} phy_interface_t;
|
||||
|
||||
@@ -286,6 +287,8 @@ static inline const char *phy_modes(phy_
|
||||
return "100base-x";
|
||||
case PHY_INTERFACE_MODE_QUSGMII:
|
||||
return "qusgmii";
|
||||
+ case PHY_INTERFACE_MODE_2500SGMII:
|
||||
+ return "sgmii-2500";
|
||||
default:
|
||||
return "unknown";
|
||||
}
|
||||
@@ -0,0 +1,239 @@
|
||||
From 1dc3a2e216d99adc2df022ab37eab32f61d80e0e Mon Sep 17 00:00:00 2001
|
||||
From: Christian Marangi <ansuelsmth@gmail.com>
|
||||
Date: Mon, 8 May 2023 19:26:48 +0200
|
||||
Subject: [PATCH] layerscape: 6.1: fix compilation warning for fsl ppfe driver
|
||||
|
||||
Rework some desc dump and dummy pkt function to fix compilation warning.
|
||||
Fix compilation warning:
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c: In function 'send_dummy_pkt_to_hif':
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:118:19: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
|
||||
118 | ddr_ptr = (void *)((u64)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:122:20: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
|
||||
122 | lmem_ptr = (void *)((u64)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c: In function 'pfe_hif_desc_dump':
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:195:24: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
|
||||
195 | desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:195:36: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
|
||||
195 | desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:207:19: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
|
||||
207 | desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
| ^
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c:207:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
|
||||
207 | desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
| ^
|
||||
cc1: all warnings being treated as errors
|
||||
|
||||
In file included from ./include/linux/kernel.h:19,
|
||||
from ./include/linux/list.h:9,
|
||||
from ./include/linux/wait.h:7,
|
||||
from ./include/linux/eventfd.h:13,
|
||||
from drivers/staging/fsl_ppfe/pfe_cdev.c:11:
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c: In function 'pfe_cdev_read':
|
||||
./include/linux/kern_levels.h:5:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'int' [-Werror=format=]
|
||||
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:422:25: note: in definition of macro 'printk_index_wrap'
|
||||
422 | _p_func(_fmt, ##__VA_ARGS__); \
|
||||
| ^~~~
|
||||
./include/linux/printk.h:132:17: note: in expansion of macro 'printk'
|
||||
132 | printk(fmt, ##__VA_ARGS__); \
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:580:9: note: in expansion of macro 'no_printk'
|
||||
580 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~~
|
||||
./include/linux/kern_levels.h:15:25: note: in expansion of macro 'KERN_SOH'
|
||||
15 | #define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
|
||||
| ^~~~~~~~
|
||||
./include/linux/printk.h:580:19: note: in expansion of macro 'KERN_DEBUG'
|
||||
580 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c:42:17: note: in expansion of macro 'pr_debug'
|
||||
42 | pr_debug("%u %lu", link_states[ret].phy_id,
|
||||
| ^~~~~~~~
|
||||
./include/linux/kern_levels.h:5:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
|
||||
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:422:25: note: in definition of macro 'printk_index_wrap'
|
||||
422 | _p_func(_fmt, ##__VA_ARGS__); \
|
||||
| ^~~~
|
||||
./include/linux/printk.h:493:9: note: in expansion of macro 'printk'
|
||||
493 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~
|
||||
./include/linux/kern_levels.h:11:25: note: in expansion of macro 'KERN_SOH'
|
||||
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
|
||||
| ^~~~~~~~
|
||||
./include/linux/printk.h:493:16: note: in expansion of macro 'KERN_ERR'
|
||||
493 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c:50:17: note: in expansion of macro 'pr_err'
|
||||
50 | pr_err("Failed to send (%d)bytes of (%lu) requested.\n",
|
||||
| ^~~~~~
|
||||
./include/linux/kern_levels.h:5:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'unsigned int' [-Werror=format=]
|
||||
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:422:25: note: in definition of macro 'printk_index_wrap'
|
||||
422 | _p_func(_fmt, ##__VA_ARGS__); \
|
||||
| ^~~~
|
||||
./include/linux/printk.h:132:17: note: in expansion of macro 'printk'
|
||||
132 | printk(fmt, ##__VA_ARGS__); \
|
||||
| ^~~~~~
|
||||
./include/linux/printk.h:580:9: note: in expansion of macro 'no_printk'
|
||||
580 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~~
|
||||
./include/linux/kern_levels.h:15:25: note: in expansion of macro 'KERN_SOH'
|
||||
15 | #define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
|
||||
| ^~~~~~~~
|
||||
./include/linux/printk.h:580:19: note: in expansion of macro 'KERN_DEBUG'
|
||||
580 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
|
||||
| ^~~~~~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c:57:9: note: in expansion of macro 'pr_debug'
|
||||
57 | pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states));
|
||||
| ^~~~~~~~
|
||||
cc1: all warnings being treated as errors
|
||||
|
||||
In file included from ./include/uapi/linux/posix_types.h:5,
|
||||
from ./include/uapi/linux/types.h:14,
|
||||
from ./include/linux/types.h:6,
|
||||
from ./include/linux/list.h:5,
|
||||
from ./include/linux/module.h:12,
|
||||
from drivers/staging/fsl_ppfe/pfe_sysfs.c:7:
|
||||
drivers/staging/fsl_ppfe/pfe_sysfs.c: In function 'pfe_set_util':
|
||||
./include/linux/stddef.h:8:14: error: passing argument 2 of 'kstrtoul' makes integer from pointer without a cast [-Werror=int-conversion]
|
||||
8 | #define NULL ((void *)0)
|
||||
| ^~~~~~~~~~~
|
||||
| |
|
||||
| void *
|
||||
drivers/staging/fsl_ppfe/pfe_sysfs.c:538:39: note: in expansion of macro 'NULL'
|
||||
538 | util_do_clear = kstrtoul(buf, NULL, 0);
|
||||
| ^~~~
|
||||
In file included from ./include/linux/kernel.h:13,
|
||||
from ./include/linux/list.h:9:
|
||||
./include/linux/kstrtox.h:30:69: note: expected 'unsigned int' but argument is of type 'void *'
|
||||
30 | static inline int __must_check kstrtoul(const char *s, unsigned int base, unsigned long *res)
|
||||
| ~~~~~~~~~~~~~^~~~
|
||||
cc1: all warnings being treated as errors
|
||||
|
||||
With UTIL compiled on, fix compilation warning:
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c: In function 'pe_load_ddr_section':
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:617:19: error: 'else' without a previous 'if'
|
||||
617 | } else {
|
||||
| ^~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:622:17: error: break statement not within loop or switch
|
||||
622 | break;
|
||||
| ^~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:624:9: error: case label not within a switch statement
|
||||
624 | case SHT_NOBITS:
|
||||
| ^~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:627:17: error: break statement not within loop or switch
|
||||
627 | break;
|
||||
| ^~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:629:9: error: 'default' label not within a switch statement
|
||||
629 | default:
|
||||
| ^~~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c: At top level:
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:635:9: error: expected identifier or '(' before 'return'
|
||||
635 | return 0;
|
||||
| ^~~~~~
|
||||
drivers/staging/fsl_ppfe/pfe_hal.c:636:1: error: expected identifier or '(' before '}' token
|
||||
636 | }
|
||||
|
||||
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
drivers/staging/fsl_ppfe/pfe_cdev.c | 6 +++---
|
||||
drivers/staging/fsl_ppfe/pfe_hif.c | 14 +++++++-------
|
||||
drivers/staging/fsl_ppfe/pfe_sysfs.c | 2 +-
|
||||
3 files changed, 11 insertions(+), 11 deletions(-)
|
||||
|
||||
--- a/drivers/staging/fsl_ppfe/pfe_cdev.c
|
||||
+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c
|
||||
@@ -34,7 +34,7 @@ static ssize_t pfe_cdev_read(struct file
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
- pr_info("PFE CDEV attempt copying (%lu) size of user.\n",
|
||||
+ pr_info("PFE CDEV attempt copying (%zu) size of user.\n",
|
||||
sizeof(link_states));
|
||||
|
||||
pr_debug("Dump link_state on screen before copy_to_user\n");
|
||||
@@ -47,14 +47,14 @@ static ssize_t pfe_cdev_read(struct file
|
||||
/* Copy to user the value in buffer sized len */
|
||||
ret = copy_to_user(buf, &link_states, sizeof(link_states));
|
||||
if (ret != 0) {
|
||||
- pr_err("Failed to send (%d)bytes of (%lu) requested.\n",
|
||||
+ pr_err("Failed to send (%d)bytes of (%zu) requested.\n",
|
||||
ret, len);
|
||||
return -EFAULT;
|
||||
}
|
||||
|
||||
/* offset set back to 0 as there is contextual reading offset */
|
||||
*off = 0;
|
||||
- pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states));
|
||||
+ pr_debug("Read of (%zu) bytes performed.\n", sizeof(link_states));
|
||||
|
||||
return sizeof(link_states);
|
||||
}
|
||||
--- a/drivers/staging/fsl_ppfe/pfe_hif.c
|
||||
+++ b/drivers/staging/fsl_ppfe/pfe_hif.c
|
||||
@@ -115,11 +115,11 @@ static void send_dummy_pkt_to_hif(void)
|
||||
0x33221100, 0xa8c05544, 0x00000301, 0x00000000,
|
||||
0x00000000, 0x00000000, 0x00000000, 0xbe86c51f };
|
||||
|
||||
- ddr_ptr = (void *)((u64)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
+ ddr_ptr = (void *)((uintptr_t)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
if (!ddr_ptr)
|
||||
return;
|
||||
|
||||
- lmem_ptr = (void *)((u64)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
+ lmem_ptr = (void *)((uintptr_t)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
|
||||
if (!lmem_ptr)
|
||||
return;
|
||||
|
||||
@@ -186,16 +186,16 @@ static void pfe_hif_free_descr(struct pf
|
||||
void pfe_hif_desc_dump(struct pfe_hif *hif)
|
||||
{
|
||||
struct hif_desc *desc;
|
||||
- unsigned long desc_p;
|
||||
+ u64 desc_p;
|
||||
int ii = 0;
|
||||
|
||||
pr_info("%s\n", __func__);
|
||||
|
||||
desc = hif->rx_base;
|
||||
- desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
+ desc_p = ((void *)desc - hif->descr_baseaddr_v +
|
||||
hif->descr_baseaddr_p);
|
||||
|
||||
- pr_info("HIF Rx desc base %p physical %x\n", desc, (u32)desc_p);
|
||||
+ pr_info("HIF Rx desc base %p physical %llx\n", desc, desc_p);
|
||||
for (ii = 0; ii < hif->rx_ring_size; ii++) {
|
||||
pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
|
||||
readl(&desc->status), readl(&desc->ctrl),
|
||||
@@ -204,10 +204,10 @@ void pfe_hif_desc_dump(struct pfe_hif *h
|
||||
}
|
||||
|
||||
desc = hif->tx_base;
|
||||
- desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
|
||||
+ desc_p = ((void *)desc - hif->descr_baseaddr_v +
|
||||
hif->descr_baseaddr_p);
|
||||
|
||||
- pr_info("HIF Tx desc base %p physical %x\n", desc, (u32)desc_p);
|
||||
+ pr_info("HIF Tx desc base %p physical %llx\n", desc, desc_p);
|
||||
for (ii = 0; ii < hif->tx_ring_size; ii++) {
|
||||
pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
|
||||
readl(&desc->status), readl(&desc->ctrl),
|
||||
--- a/drivers/staging/fsl_ppfe/pfe_sysfs.c
|
||||
+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c
|
||||
@@ -535,7 +535,7 @@ static ssize_t pfe_show_tmu3_queues(stru
|
||||
static ssize_t pfe_set_util(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
- util_do_clear = kstrtoul(buf, NULL, 0);
|
||||
+ util_do_clear = kstrtoul(buf, 0, 0);
|
||||
return count;
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user