Initial commit

target/linux/layerscape/base-files/etc/board.d/01_led

@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+	ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
+	ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/layerscape/base-files/etc/board.d/02_network

@@ -0,0 +1,20 @@
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	fsl,ls1028a-rdb|\
+	fsl,ls1028a-rdb-sdboot)
+		ucidef_set_interfaces_lan_wan "swp0 swp1 swp2 swp3" "eth0"
+		;;
+	traverse,ten64)
+		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
+		ucidef_set_interface_wan "eth6"
+		;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/layerscape/base-files/etc/board.d/03_gpio_switches

@@ -0,0 +1,24 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+	ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "376"
+	ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "377"
+	ucidef_add_gpio_switch "lte_disable" "Cell Modem Airplane mode" "378"
+	ucidef_add_gpio_switch "gnss_disable" "Cell Modem Disable GNSS receiver" "379"
+	ucidef_add_gpio_switch "lower_sfp_txidsable" "Lower SFP+ TX Disable" "369"
+	ucidef_add_gpio_switch "upper_sfp_txdisable" "Upper SFP+ TX Disable" "373"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/layerscape/base-files/etc/uci-defaults/05_fix-compat-version

@@ -0,0 +1,25 @@
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+
+case "$(board_name)" in
+	fsl,ls1012a-frwy-sdboot | \
+	fsl,ls1012a-rdb | \
+	fsl,ls1021a-iot-sdboot | \
+	fsl,ls1021a-twr | \
+	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1043a-rdb | \
+	fsl,ls1043a-rdb-sdboot | \
+	fsl,ls1046a-rdb | \
+	fsl,ls1046a-rdb-sdboot | \
+	fsl,ls1088a-rdb | \
+	fsl,ls1088a-rdb-sdboot | \
+	fsl,ls2088a-rdb)
+		uci set system.@system[0].compat_version="2.0"
+		uci commit system
+		;;
+esac
+
+exit 0

target/linux/layerscape/base-files/lib/preinit/02_sysinfo_fixup

@@ -0,0 +1,13 @@
+do_sysinfo_layerscape_fixup() {
+	[ -e /tmp/sysinfo/board_name ] || return
+	[ -e /proc/cmdline ] || return
+	cmdline=$(strings /proc/cmdline)
+	case "${cmdline}" in
+		*root=/dev/mmcblk*)
+			board="$(strings /tmp/sysinfo/board_name)-sdboot"
+			echo ${board} > /tmp/sysinfo/board_name
+		;;
+	esac
+}
+
+boot_hook_add preinit_main do_sysinfo_layerscape_fixup

target/linux/layerscape/base-files/lib/preinit/79_move_config

@@ -0,0 +1,28 @@
+. /lib/functions.sh
+. /lib/upgrade/common.sh
+
+BOOTPART=/dev/mmcblk0p1
+
+move_config() {
+	local board=$(board_name)
+
+	case "$board" in
+	fsl,ls1012a-frwy-sdboot | \
+	fsl,ls1021a-iot-sdboot | \
+	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1028a-rdb-sdboot | \
+	fsl,ls1043a-rdb-sdboot | \
+	fsl,ls1046a-frwy-sdboot | \
+	fsl,ls1046a-rdb-sdboot | \
+	fsl,ls1088a-rdb-sdboot)
+		if [ -b $BOOTPART ]; then
+			mkdir -p /boot
+			mount -t ext4 -o rw,noatime $BOOTPART /boot 2>&1
+			[ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" /
+			umount /boot
+		fi
+		;;
+	esac
+}
+
+boot_hook_add preinit_mount_root move_config

target/linux/layerscape/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,163 @@
+#
+# Copyright 2015-2019 Traverse Technologies
+# Copyright 2020 NXP
+#
+
+RAMFS_COPY_BIN=""
+RAMFS_COPY_DATA=""
+
+REQUIRE_IMAGE_METADATA=1
+
+platform_do_upgrade_sdboot() {
+	local diskdev partdev parttype=ext4
+	local tar_file="$1"
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	if export_partdevice partdev 1; then
+		mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt 2>&1
+		echo "Writing kernel..."
+		tar xf $tar_file ${board_dir}/kernel -O > /mnt/fitImage
+		umount /mnt
+	fi
+
+	echo "Erasing rootfs..."
+	dd if=/dev/zero of=/dev/mmcblk0p2 bs=1M > /dev/null 2>&1
+	echo "Writing rootfs..."
+	tar xf $tar_file ${board_dir}/root -O  | dd of=/dev/mmcblk0p2 bs=512k > /dev/null 2>&1
+
+}
+
+platform_do_upgrade_traverse_slotubi() {
+	part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
+	echo "Active boot slot: ${part}"
+	new_active_sys="b"
+
+	if [ ! -z "${part}" ]; then
+		if [ "${part}" = "ubia" ]; then
+			CI_UBIPART="ubib"
+		else
+			CI_UBIPART="ubia"
+			new_active_sys="a"
+		fi
+	fi
+	echo "Updating UBI part ${CI_UBIPART}"
+	fw_setenv "openwrt_active_sys" "${new_active_sys}"
+	nand_do_upgrade "$1"
+	return $?
+}
+
+platform_copy_config_sdboot() {
+	local diskdev partdev parttype=ext4
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	if export_partdevice partdev 1; then
+		mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt 2>&1
+		echo "Saving config backup..."
+		cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+		umount /mnt
+	fi
+}
+platform_copy_config() {
+	local board=$(board_name)
+
+	case "$board" in
+	fsl,ls1012a-frwy-sdboot | \
+	fsl,ls1021a-iot-sdboot | \
+	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1028a-rdb-sdboot | \
+	fsl,ls1043a-rdb-sdboot | \
+	fsl,ls1046a-frwy-sdboot | \
+	fsl,ls1046a-rdb-sdboot | \
+	fsl,ls1088a-rdb-sdboot | \
+	fsl,lx2160a-rdb-sdboot)
+		platform_copy_config_sdboot
+		;;
+	esac
+}
+platform_check_image() {
+	local board=$(board_name)
+
+	case "$board" in
+	traverse,ten64)
+		nand_do_platform_check "ten64-mtd" $1
+		return $?
+		;;
+	fsl,ls1012a-frdm | \
+	fsl,ls1012a-frwy-sdboot | \
+	fsl,ls1012a-rdb | \
+	fsl,ls1021a-iot-sdboot | \
+	fsl,ls1021a-twr | \
+	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1028a-rdb | \
+	fsl,ls1028a-rdb-sdboot | \
+	fsl,ls1043a-rdb | \
+	fsl,ls1043a-rdb-sdboot | \
+	fsl,ls1046a-frwy | \
+	fsl,ls1046a-frwy-sdboot | \
+	fsl,ls1046a-rdb | \
+	fsl,ls1046a-rdb-sdboot | \
+	fsl,ls1088a-rdb | \
+	fsl,ls1088a-rdb-sdboot | \
+	fsl,ls2088a-rdb | \
+	fsl,lx2160a-rdb | \
+	fsl,lx2160a-rdb-sdboot)
+		return 0
+		;;
+	*)
+		echo "Sysupgrade is not currently supported on $board"
+		;;
+	esac
+
+	return 1
+}
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	# Force the creation of fw_printenv.lock
+	mkdir -p /var/lock
+	touch /var/lock/fw_printenv.lock
+
+	case "$board" in
+	traverse,ten64)
+		platform_do_upgrade_traverse_slotubi "${1}"
+		;;
+	fsl,ls1012a-frdm | \
+	fsl,ls1012a-rdb | \
+	fsl,ls1021a-twr | \
+	fsl,ls1028a-rdb | \
+	fsl,ls1043a-rdb | \
+	fsl,ls1046a-frwy | \
+	fsl,ls1046a-rdb | \
+	fsl,ls1088a-rdb | \
+	fsl,ls2088a-rdb | \
+	fsl,lx2160a-rdb)
+		PART_NAME=firmware
+		default_do_upgrade "$1"
+		;;
+	fsl,ls1012a-frwy-sdboot | \
+	fsl,ls1021a-iot-sdboot | \
+	fsl,ls1021a-twr-sdboot | \
+	fsl,ls1028a-rdb-sdboot | \
+	fsl,ls1043a-rdb-sdboot | \
+	fsl,ls1046a-frwy-sdboot | \
+	fsl,ls1046a-rdb-sdboot | \
+	fsl,ls1088a-rdb-sdboot | \
+	fsl,lx2160a-rdb-sdboot)
+		platform_do_upgrade_sdboot "$1"
+		return 0
+		;;
+	*)
+		echo "Sysupgrade is not currently supported on $board"
+		;;
+	esac
+}