Initial commit
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
This commit is contained in:
domenico
481
target/linux/mediatek/dts/mt7986a-smartrg-bonanza-peak.dtsi
Normal file
481
target/linux/mediatek/dts/mt7986a-smartrg-bonanza-peak.dtsi
Normal file
@@ -0,0 +1,481 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2022 SmartRG Inc.
|
||||
* Author: Chad Monroe <chad.monroe@smartrg.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7986a.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_white;
|
||||
led-upgrade = &led_status_blue;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs = "root=/dev/mmcblk0p5";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
/delete-node/ramoops@42ff0000;
|
||||
|
||||
bootdata_reserved: bootdata@45000000 {
|
||||
no-map;
|
||||
reg = <0x0 0x45000000 0x0 0x00001000>;
|
||||
};
|
||||
|
||||
ramoops_reserved: ramoops@45001000 {
|
||||
no-map;
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0x45001000 0x0 0x00140000>;
|
||||
ftrace-size = <0x20000>;
|
||||
record-size = <0x20000>;
|
||||
console-size = <0x20000>;
|
||||
pmsg-size = <0x80000>;
|
||||
};
|
||||
};
|
||||
|
||||
bootdata {
|
||||
compatible = "bootdata";
|
||||
memory-region = <&bootdata_reserved>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
pwms = <&pwm 1 40000 0>;
|
||||
|
||||
/**
|
||||
* set fan speed
|
||||
*
|
||||
* 0 = off
|
||||
* 51 = 20% duty cycle (minimum supported)
|
||||
* 61 = 24% duty cycle (2020 RPM)
|
||||
* 77 = 30% duty cycle (3000 RPM)
|
||||
* 102 = 40% duty cycle (3600 RPM)
|
||||
* 255 = 100% duty cycle
|
||||
*/
|
||||
cooling-levels = <51 61 77 102>;
|
||||
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
pulses-per-revolution = <2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_thermal {
|
||||
cooling-maps {
|
||||
cpu-active-high {
|
||||
/* active: set fan to cooling level 3 */
|
||||
cooling-device = <&fan 3 3>;
|
||||
trip = <&cpu_trip_active_high>;
|
||||
};
|
||||
|
||||
cpu-active-medium {
|
||||
/* active: set fan to cooling level 2 */
|
||||
cooling-device = <&fan 2 2>;
|
||||
trip = <&cpu_trip_active_medium>;
|
||||
};
|
||||
|
||||
cpu-active-low {
|
||||
/* active: set fan to cooling level 1 */
|
||||
cooling-device = <&fan 1 1>;
|
||||
trip = <&cpu_trip_active_low>;
|
||||
};
|
||||
|
||||
cpu-active-silent {
|
||||
/* active: set fan to cooling level 0 */
|
||||
cooling-device = <&fan 0 0>;
|
||||
trip = <&cpu_trip_active_silent>;
|
||||
};
|
||||
};
|
||||
|
||||
trips {
|
||||
cpu_trip_active_high: active-high {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_trip_active_medium: active-medium {
|
||||
temperature = <80000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_trip_active_low: active-low {
|
||||
temperature = <60000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_trip_active_silent: active-silent {
|
||||
temperature = <40000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
|
||||
phy-mode = "2500base-x";
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
label = "wan";
|
||||
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
|
||||
phy-mode = "2500base-x";
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <1500000>;
|
||||
reset-post-delay-us = <1000000>;
|
||||
|
||||
phy5: ethernet-phy@5 {
|
||||
/* GPY211 */
|
||||
compatible = "maxlinear,gpy211", "ethernet-phy-ieee802.3-c45";
|
||||
reg = <5>;
|
||||
|
||||
mxl,led-drive-vdd;
|
||||
mxl,led-config = <0x30 0x40 0x80 0x0>;
|
||||
};
|
||||
|
||||
phy6: ethernet-phy@6 {
|
||||
/* GPY211 */
|
||||
compatible = "maxlinear,gpy211", "ethernet-phy-ieee802.3-c45";
|
||||
reg = <6>;
|
||||
|
||||
mxl,led-drive-vdd;
|
||||
mxl,led-config = <0x30 0x40 0x80 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc0_pins_default>;
|
||||
pinctrl-1 = <&mmc0_pins_uhs>;
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
hs400-ds-delay = <0x14014>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_pins>;
|
||||
status = "disabled";
|
||||
|
||||
slot0: pcie@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
|
||||
radio0: mt7915@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wf_2g_5g_pins>;
|
||||
};
|
||||
|
||||
&pio {
|
||||
mmc0_pins_default: mmc0-pins {
|
||||
mux {
|
||||
function = "emmc";
|
||||
groups = "emmc_51";
|
||||
};
|
||||
conf-cmd-dat {
|
||||
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
||||
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
||||
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
||||
input-enable;
|
||||
drive-strength = <4>;
|
||||
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
||||
};
|
||||
conf-clk {
|
||||
pins = "EMMC_CK";
|
||||
drive-strength = <6>;
|
||||
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
||||
};
|
||||
conf-ds {
|
||||
pins = "EMMC_DSL";
|
||||
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
||||
};
|
||||
conf-rst {
|
||||
pins = "EMMC_RSTB";
|
||||
drive-strength = <4>;
|
||||
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins_uhs: mmc0-uhs-pins {
|
||||
mux {
|
||||
function = "emmc";
|
||||
groups = "emmc_51";
|
||||
};
|
||||
conf-cmd-dat {
|
||||
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
||||
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
||||
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
||||
input-enable;
|
||||
drive-strength = <4>;
|
||||
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
||||
};
|
||||
conf-clk {
|
||||
pins = "EMMC_CK";
|
||||
drive-strength = <6>;
|
||||
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
||||
};
|
||||
conf-ds {
|
||||
pins = "EMMC_DSL";
|
||||
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
||||
};
|
||||
conf-rst {
|
||||
pins = "EMMC_RSTB";
|
||||
drive-strength = <4>;
|
||||
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
||||
};
|
||||
};
|
||||
|
||||
pcie_pins: pcie-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie_clk", "pcie_pereset";
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button-pins {
|
||||
pins = "GPIO_12";
|
||||
mediatek,pull-down-adv = <0>; /* bias-disable */
|
||||
};
|
||||
|
||||
uart1_pins: uart1-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart1_2_rx_tx", "uart1_2_cts_rts";
|
||||
};
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0-pins {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c";
|
||||
};
|
||||
};
|
||||
|
||||
pwm_pins: pwm-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm0", "pwm1_0";
|
||||
};
|
||||
};
|
||||
|
||||
wf_2g_5g_pins: wf-2g-5g-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_2g", "wf_5g";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
mux_sel: mux-sel-hog {
|
||||
gpio-hog;
|
||||
gpios = <23 GPIO_ACTIVE_LOW>;
|
||||
line-name = "mux-sel";
|
||||
output-high;
|
||||
};
|
||||
|
||||
mux_oe: mux-oe-hog {
|
||||
gpio-hog;
|
||||
gpios = <24 GPIO_ACTIVE_LOW>;
|
||||
line-name = "mux-oe";
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
&ssusb {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&trng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
status = "okay";
|
||||
|
||||
/* DA14531MOD Bluetooth */
|
||||
bluetooth {
|
||||
compatible = "renesas,DA14531";
|
||||
reset-gpios = <&pio 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
|
||||
system-leds {
|
||||
compatible = "srg,sysled";
|
||||
reg = <0x30>;
|
||||
|
||||
led_status_red: led@1 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
led_status_green: led@2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
led_status_blue: led@3 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
led_status_white: led@4 {
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user