Initial commit
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
This commit is contained in:
domenico
132
target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
Normal file
132
target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
Normal file
@@ -0,0 +1,132 @@
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
board_config_update
|
||||
|
||||
case $board in
|
||||
abt,asr3000)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan-2ghz" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan-5ghz" "phy1-ap0"
|
||||
;;
|
||||
confiabits,mt7981)
|
||||
ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" "link tx rx"
|
||||
ucidef_set_led_netdev "lan3" "lan3" "blue:lan-3" "lan3" "link tx rx"
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
|
||||
;;
|
||||
bananapi,bpi-r3-mini)
|
||||
ucidef_set_led_netdev "lan1" "LAN" "mdio-bus:0e:green:lan" "eth0" "link_2500 link_1000 tx rx"
|
||||
ucidef_set_led_netdev "lan2" "LAN" "mdio-bus:0e:yellow:lan" "eth0" "link_2500 link_100 tx rx"
|
||||
ucidef_set_led_netdev "wan1" "WAN" "mdio-bus:0f:green:wan" "eth1" "link_2500 link_1000 tx rx"
|
||||
ucidef_set_led_netdev "wan2" "WAN" "mdio-bus:0f:yellow:wan" "eth1" "link_2500 link_100 tx rx"
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan-1" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan-2" "phy1-ap0"
|
||||
;;
|
||||
bananapi,bpi-r4|\
|
||||
bananapi,bpi-r4-poe)
|
||||
ucidef_set_led_netdev "wan" "wan" "mt7530-0:00:green:lan" "wan" "link tx rx"
|
||||
ucidef_set_led_netdev "lan1" "lan1" "mt7530-0:01:green:lan" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
|
||||
ucidef_set_led_netdev "lan3" "lan3" "mt7530-0:03:green:lan" "lan3" "link tx rx"
|
||||
;;
|
||||
cudy,re3000-v1)
|
||||
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" "link tx rx"
|
||||
;;
|
||||
cudy,wr3000-v1)
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
|
||||
;;
|
||||
glinet,gl-x3000|\
|
||||
glinet,gl-xe3000)
|
||||
ucidef_set_led_default "power" "POWER" "green:power" "1"
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
|
||||
ucidef_set_led_netdev "5g_1" "5G_1" "green:5g:led1" "wwan0"
|
||||
ucidef_set_led_netdev "5g_2" "5G_2" "green:5g:led2" "wwan0"
|
||||
ucidef_set_led_netdev "5g_3" "5G_3" "green:5g:led3" "wwan0"
|
||||
ucidef_set_led_netdev "5g_4" "5G_4" "green:5g:led4" "wwan0"
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wifi2g" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wifi5g" "phy1-ap0"
|
||||
;;
|
||||
mercusys,mr90x-v1)
|
||||
ucidef_set_led_netdev "lan-0" "lan-0" "green:lan-0" "lan0" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-1" "lan-1" "green:lan-1" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-2" "lan-2" "green:lan-2" "lan2" "link tx rx"
|
||||
ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
|
||||
;;
|
||||
netgear,wax220)
|
||||
ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
|
||||
;;
|
||||
nokia,ea0326gmp)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" "link"
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan" "link"
|
||||
ucidef_set_led_netdev "wlan" "WLAN" "green:wlan" "phy1-ap0" "link"
|
||||
;;
|
||||
openembed,som7981)
|
||||
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
||||
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
||||
;;
|
||||
openwrt,one)
|
||||
ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx"
|
||||
ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:0f:amber:wan" "eth0" "link"
|
||||
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
||||
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
||||
;;
|
||||
routerich,ax3000)
|
||||
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-3" "lan-3" "blue:lan-3" "lan3" "link tx rx"
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
|
||||
ucidef_set_led_netdev "wan-off" "wan-off" "red:wan" "wan" "link"
|
||||
;;
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8734)
|
||||
ucidef_set_led_netdev "lan-1-green" "LAN1" "mdio-bus:08:green:lan" "lan1" "link_2500 link_5000"
|
||||
ucidef_set_led_netdev "lan-1-orange" "LAN1" "mdio-bus:08:orange:lan" "lan1" "link_100 link_1000"
|
||||
ucidef_set_led_netdev "lan-1-white" "LAN1" "mdio-bus:08:white:lan" "lan1" "link_10000"
|
||||
ucidef_set_led_netdev "lan-2-green" "LAN2" "mt7530-0:01:green:lan" "lan2" "link_1000"
|
||||
ucidef_set_led_netdev "lan-2-amber" "LAN2" "mt7530-0:01:amber:lan" "lan2" "link_100 link_10"
|
||||
ucidef_set_led_netdev "lan-3-green" "LAN3" "mt7530-0:02:green:lan" "lan3" "link_1000"
|
||||
ucidef_set_led_netdev "lan-3-amber" "LAN3" "mt7530-0:02:amber:lan" "lan3" "link_100 link_10"
|
||||
ucidef_set_led_netdev "lan-4-green" "LAN4" "mt7530-0:03:green:lan" "lan4" "link_1000"
|
||||
ucidef_set_led_netdev "lan-4-amber" "LAN4" "mt7530-0:03:amber:lan" "lan4" "link_100 link_10"
|
||||
ucidef_set_led_netdev "wan-green" "WAN" "mdio-bus:00:green:wan" "wan" "link_2500 link_5000"
|
||||
ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:00:orange:wan" "wan" "link_100 link_1000"
|
||||
ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:00:white:wan" "wan" "link_10000"
|
||||
;;
|
||||
wavlink,wl-wn586x3)
|
||||
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "eth1" "link tx rx"
|
||||
;;
|
||||
tplink,re6000xd)
|
||||
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-0" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-1" "lan2" "link tx rx"
|
||||
ucidef_set_led_netdev "eth1" "lan-3" "blue:lan-2" "eth1" "link tx rx"
|
||||
;;
|
||||
xiaomi,mi-router-wr30u-stock|\
|
||||
xiaomi,mi-router-wr30u-ubootmod)
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
|
||||
;;
|
||||
xiaomi,redmi-router-ax6000-stock|\
|
||||
xiaomi,redmi-router-ax6000-ubootmod)
|
||||
ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
|
||||
;;
|
||||
zbtlink,zbt-z8103ax)
|
||||
ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
|
||||
;;
|
||||
zyxel_ex5601-t0-stock|\
|
||||
zyxel,ex5601-t0-ubootmod)
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link tx rx"
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:inet" "eth1" "link tx rx"
|
||||
ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx"
|
||||
ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
198
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
Normal file
198
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
Normal file
@@ -0,0 +1,198 @@
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
mediatek_setup_interfaces()
|
||||
{
|
||||
local board="$1"
|
||||
|
||||
case $board in
|
||||
acelink,ew-7886cax)
|
||||
ucidef_set_interface_lan "eth0" "dhcp"
|
||||
;;
|
||||
abt,asr3000|\
|
||||
cmcc,rax3000m|\
|
||||
h3c,magic-nx30-pro|\
|
||||
nokia,ea0326gmp|\
|
||||
zbtlink,zbt-z8103ax)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
|
||||
;;
|
||||
acer,predator-w6)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
|
||||
;;
|
||||
asus,rt-ax59u|\
|
||||
cetron,ct3003|\
|
||||
confiabits,mt7981|\
|
||||
cudy,wr3000-v1|\
|
||||
jcg,q30-pro|\
|
||||
qihoo,360t7|\
|
||||
routerich,ax3000)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
|
||||
;;
|
||||
asus,tuf-ax4200|\
|
||||
jdcloud,re-cp-03|\
|
||||
mediatek,mt7981-rfb|\
|
||||
netcore,n60|\
|
||||
ruijie,rg-x60-pro|\
|
||||
unielec,u7981-01*|\
|
||||
zbtlink,zbt-z8102ax)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
|
||||
;;
|
||||
asus,tuf-ax6000)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1
|
||||
;;
|
||||
bananapi,bpi-r3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
|
||||
;;
|
||||
bananapi,bpi-r3-mini|\
|
||||
edgecore,eap111)
|
||||
ucidef_set_interfaces_lan_wan eth0 eth1
|
||||
;;
|
||||
bananapi,bpi-r4|\
|
||||
bananapi,bpi-r4-poe)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 eth1" "wan eth2"
|
||||
;;
|
||||
comfast,cf-e393ax)
|
||||
ucidef_set_interfaces_lan_wan "lan1" eth1
|
||||
;;
|
||||
cudy,m3000-v1|\
|
||||
cudy,tr3000-v1|\
|
||||
glinet,gl-mt2500|\
|
||||
glinet,gl-mt3000|\
|
||||
glinet,gl-x3000|\
|
||||
glinet,gl-xe3000|\
|
||||
openembed,som7981|\
|
||||
openwrt,one)
|
||||
ucidef_set_interfaces_lan_wan eth1 eth0
|
||||
;;
|
||||
dlink,aquila-pro-ai-m30-a1)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" internet
|
||||
;;
|
||||
glinet,gl-mt6000|\
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6088|\
|
||||
tplink,tl-xtr8488)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1
|
||||
;;
|
||||
mediatek,mt7986a-rfb)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan6" "eth1 wan"
|
||||
;;
|
||||
mediatek,mt7986b-rfb)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" eth1
|
||||
;;
|
||||
mediatek,mt7988a-rfb)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 eth1" eth2
|
||||
;;
|
||||
mercusys,mr90x-v1)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
|
||||
;;
|
||||
cudy,re3000-v1|\
|
||||
netgear,wax220|\
|
||||
ubnt,unifi-6-plus|\
|
||||
zyxel,nwa50ax-pro)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
smartrg,sdg-8622|\
|
||||
smartrg,sdg-8632|\
|
||||
yuncore,ax835)
|
||||
ucidef_set_interfaces_lan_wan lan wan
|
||||
;;
|
||||
tplink,tl-xdr6086|\
|
||||
wavlink,wl-wn586x3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2" eth1
|
||||
;;
|
||||
tplink,re6000xd)
|
||||
ucidef_set_interface_lan "lan1 lan2 eth1"
|
||||
;;
|
||||
xiaomi,mi-router-ax3000t|\
|
||||
xiaomi,mi-router-ax3000t-ubootmod|\
|
||||
xiaomi,mi-router-wr30u-stock|\
|
||||
xiaomi,mi-router-wr30u-ubootmod|\
|
||||
xiaomi,redmi-router-ax6000-stock|\
|
||||
xiaomi,redmi-router-ax6000-ubootmod)
|
||||
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" wan
|
||||
;;
|
||||
zyxel,ex5601-t0-stock|\
|
||||
zyxel,ex5601-t0-ubootmod)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
mediatek_setup_macs()
|
||||
{
|
||||
local board="$1"
|
||||
local lan_mac=""
|
||||
local wan_mac=""
|
||||
local label_mac=""
|
||||
|
||||
case $board in
|
||||
bananapi,bpi-r3|\
|
||||
bananapi,bpi-r3-mini|\
|
||||
bananapi,bpi-r4)
|
||||
wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
|
||||
;;
|
||||
h3c,magic-nx30-pro)
|
||||
wan_mac=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
mercusys,mr90x-v1|\
|
||||
tplink,re6000xd)
|
||||
label_mac=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
|
||||
lan_mac=$label_mac
|
||||
;;
|
||||
netgear,wax220)
|
||||
lan_mac=$(mtd_get_mac_ascii u-boot-env mac)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
qihoo,360t7)
|
||||
lan_mac=$(mtd_get_mac_ascii factory lanMac)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
ruijie,rg-x60-pro)
|
||||
label_mac=$(mtd_get_mac_ascii product_info ethaddr)
|
||||
wan_mac=$label_mac
|
||||
lan_mac=$(macaddr_add "$label_mac" 1)
|
||||
;;
|
||||
smartrg,sdg-8612|\
|
||||
smartrg,sdg-8614|\
|
||||
smartrg,sdg-8622|\
|
||||
smartrg,sdg-8632|\
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8734)
|
||||
label_mac=$(mmc_get_mac_ascii mfginfo MFG_MAC)
|
||||
wan_mac=$label_mac
|
||||
lan_mac=$(macaddr_add "$label_mac" 1)
|
||||
;;
|
||||
xiaomi,mi-router-ax3000t|\
|
||||
xiaomi,mi-router-ax3000t-ubootmod|\
|
||||
xiaomi,mi-router-wr30u-stock|\
|
||||
xiaomi,mi-router-wr30u-ubootmod|\
|
||||
xiaomi,redmi-router-ax6000-stock|\
|
||||
xiaomi,redmi-router-ax6000-ubootmod)
|
||||
wan_mac=$(mtd_get_mac_ascii Bdata ethaddr_wan)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
yuncore,ax835)
|
||||
label_mac=$(mtd_get_mac_binary "Factory" 0x4)
|
||||
;;
|
||||
esac
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
|
||||
[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
|
||||
}
|
||||
|
||||
board_config_update
|
||||
board=$(board_name)
|
||||
mediatek_setup_interfaces $board
|
||||
mediatek_setup_macs $board
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,19 @@
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
zbtlink,zbt-z8102ax)
|
||||
ucidef_add_gpio_switch "5g1" "Power 1st modem" "5g1" "1"
|
||||
ucidef_add_gpio_switch "5g2" "Power 2nd modem" "5g2" "1"
|
||||
ucidef_add_gpio_switch "pcie" "Power PCIe port" "pcie" "1"
|
||||
ucidef_add_gpio_switch "sim1" "SIM 1" "sim1" "1"
|
||||
ucidef_add_gpio_switch "sim2" "SIM 2" "sim2" "1"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,15 @@
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
bananapi,bpi-r3)
|
||||
ucidef_set_compat_version "1.2"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,57 @@
|
||||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"mediatek/mt7915_eeprom.bin")
|
||||
case "$board" in
|
||||
smartrg,sdg-8622)
|
||||
caldata_extract_mmc "factory" 0xa0000 0x1000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"mediatek/mt7916_eeprom.bin")
|
||||
case "$board" in
|
||||
acer,predator-w6|\
|
||||
smartrg,sdg-8632)
|
||||
caldata_extract_mmc "factory" 0xa0000 0x1000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"mediatek/mt7981_eeprom_mt7976_dbdc.bin")
|
||||
case "$board" in
|
||||
ubnt,unifi-6-plus)
|
||||
caldata_extract_mmc "factory" 0x0 0x1000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"mediatek/mt7986_eeprom_mt7975_dual.bin")
|
||||
case "$board" in
|
||||
mercusys,mr90x-v1|\
|
||||
tplink,re6000xd)
|
||||
ln -sf /tmp/tp_data/MT7986_EEPROM.bin \
|
||||
/lib/firmware/$FIRMWARE
|
||||
;;
|
||||
smartrg,sdg-8612|\
|
||||
smartrg,sdg-8614|\
|
||||
smartrg,sdg-8622|\
|
||||
smartrg,sdg-8632)
|
||||
caldata_extract_mmc "factory" 0x0 0x1000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"mediatek/mt7986_eeprom_mt7976.bin")
|
||||
case "$board" in
|
||||
acer,predator-w6)
|
||||
caldata_extract_mmc "factory" 0x0 0x1000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
*)
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
@@ -0,0 +1,183 @@
|
||||
[ "$ACTION" == "add" ] || exit 0
|
||||
|
||||
PHYNBR=${DEVPATH##*/phy}
|
||||
|
||||
[ -n $PHYNBR ] || exit 0
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
abt,asr3000)
|
||||
# Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
|
||||
# addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
|
||||
addr=$(cat /sys/class/net/eth1/address)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $addr > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
acer,predator-w6)
|
||||
key_path="/var/qcidata/data"
|
||||
[ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && cat $key_path/6gMAC > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "2" ] && cat $key_path/5gMAC > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
asus,rt-ax59u)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
|
||||
# Originally, phy1 is phy0 mac with LA and 28th bits set. However, this would conflict
|
||||
# addresses on multiple VIFs with the other radio when bit 28 is already set.
|
||||
# Set LA and 28 bits and increment mac-address instead.
|
||||
[ "$PHYNBR" = "1" ] && \
|
||||
macaddr_setbit_la $(macaddr_setbit $(macaddr_add $addr 1) 28) > \
|
||||
/sys${DEVPATH}/macaddress
|
||||
;;
|
||||
asus,tuf-ax4200|\
|
||||
asus,tuf-ax6000)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
|
||||
# Originally, phy0 is phy1 mac with LA bit set. However, this would conflict
|
||||
# addresses on multiple VIFs with the other radio. Set LA bit and increment
|
||||
# mac-address instead.
|
||||
[ "$PHYNBR" = "0" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
bananapi,bpi-r3|\
|
||||
bananapi,bpi-r3-mini)
|
||||
addr=$(cat /sys/class/net/eth0/address)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
bananapi,bpi-r4|\
|
||||
bananapi,bpi-r4-poe)
|
||||
addr=$(cat /sys/class/net/eth0/address)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "2" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
cetron,ct3003)
|
||||
addr=$(mtd_get_mac_binary "art" 0)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 2) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
cmcc,rax3000m)
|
||||
addr=$(cat /sys/class/net/eth0/address)
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr -1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
comfast,cf-e393ax)
|
||||
addr=$(mtd_get_mac_binary "Factory" 0x8000)
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
cudy,tr3000-v1|\
|
||||
cudy,re3000-v1)
|
||||
addr=$(mtd_get_mac_binary bdinfo 0xde00)
|
||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
cudy,m3000-v1|\
|
||||
cudy,wr3000-v1)
|
||||
addr=$(mtd_get_mac_binary bdinfo 0xde00)
|
||||
# Originally, phy0 is phy1 mac with LA bit set. However, this would conflict
|
||||
# addresses on multiple VIFs with the other radio. Set LA bit and increment
|
||||
# mac-address instead.
|
||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
dlink,aquila-pro-ai-m30-a1)
|
||||
addr=$(mtd_get_mac_binary "Odm" 0x81)
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
glinet,gl-mt6000|\
|
||||
glinet,gl-x3000|\
|
||||
glinet,gl-xe3000)
|
||||
addr=$(mmc_get_mac_binary factory 0x04)
|
||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
h3c,magic-nx30-pro)
|
||||
addr=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
jcg,q30-pro|\
|
||||
netcore,n60)
|
||||
# Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
|
||||
# addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
jdcloud,re-cp-03)
|
||||
[ "$PHYNBR" = "1" ] && mmc_get_mac_binary factory 0xa > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
mercusys,mr90x-v1|\
|
||||
tplink,re6000xd)
|
||||
addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
|
||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr -1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
netgear,wax220)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii u-boot-env mac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
nokia,ea0326gmp)
|
||||
addr=$(cat /sys/class/net/eth0/address)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
openembed,som7981)
|
||||
[ "$PHYNBR" = "1" ] && cat /sys/class/net/eth0/address > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
qihoo,360t7)
|
||||
addr=$(mtd_get_mac_ascii factory lanMac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
ruijie,rg-x60-pro)
|
||||
addr=$(mtd_get_mac_ascii product_info ethaddr)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
smartrg,sdg-8612|\
|
||||
smartrg,sdg-8614|\
|
||||
smartrg,sdg-8622|\
|
||||
smartrg,sdg-8632)
|
||||
addr=$(mmc_get_mac_ascii mfginfo MFG_MAC)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "2" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8634)
|
||||
addr=$(mmc_get_mac_ascii mfginfo MFG_MAC)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr a > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "2" ] && macaddr_add $addr 6 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088)
|
||||
[ "$PHYNBR" = "0" ] && get_mac_label > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
tplink,tl-xtr8488)
|
||||
[ "$PHYNBR" = "1" ] && get_mac_label > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
ubnt,unifi-6-plus)
|
||||
addr=$(mtd_get_mac_binary EEPROM 0x6)
|
||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
routerich,ax3000|\
|
||||
zbtlink,zbt-z8102ax|\
|
||||
zbtlink,zbt-z8103ax|\
|
||||
zyxel,ex5601-t0|\
|
||||
zyxel,ex5601-t0-ubootmod)
|
||||
addr=$(mtd_get_mac_binary "Factory" 0x4)
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
zyxel,nwa50ax-pro)
|
||||
hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
esac
|
||||
19
target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
Executable file
19
target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
Executable file
@@ -0,0 +1,19 @@
|
||||
#!/bin/sh /etc/rc.common
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
START=99
|
||||
|
||||
boot() {
|
||||
case $(board_name) in
|
||||
dlink,aquila-pro-ai-m30-a1)
|
||||
if grep -q bootpart=ubi0 /proc/cmdline; then
|
||||
fw_setenv bootpart 0
|
||||
else
|
||||
fw_setenv bootpart 1
|
||||
fi
|
||||
;;
|
||||
zyxel,ex5700-telenor)
|
||||
fw_setenv uboot_bootcount 0
|
||||
;;
|
||||
esac
|
||||
}
|
||||
@@ -0,0 +1,10 @@
|
||||
. /lib/functions.sh
|
||||
|
||||
case "$(board_name)" in
|
||||
bananapi,bpi-r3)
|
||||
uci set system.@system[0].compat_version="1.2"
|
||||
uci commit system
|
||||
;;
|
||||
esac
|
||||
|
||||
exit 0
|
||||
Reference in New Issue
Block a user