Initial commit

target/linux/mediatek/mt7629/base-files/etc/board.d/01_leds

@@ -0,0 +1,20 @@
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+
+board_config_update
+
+case $board in
+iptime,a6004mx)
+	ucidef_set_led_netdev "wan" "WAN" "orange:wan" "eth1"
+	;;
+netgear,ex6250-v2)
+	ucidef_set_led_netdev "eth_act" "LAN act" "yellow:eth" "eth0" "tx rx"
+	ucidef_set_led_netdev "eth_link" "LAN link" "green:eth" "eth0" "link"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/mediatek/mt7629/base-files/etc/board.d/02_network

@@ -0,0 +1,48 @@
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+mediatek_setup_interfaces()
+{
+	local board="$1"
+
+	case $board in
+	iptime,a6004mx)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth1"
+		;;
+	mediatek,mt7629-rfb)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "6@eth0"
+		;;
+	netgear,ex6250-v2|\
+	tplink,eap225-v5)
+		ucidef_set_interface_lan "eth0"
+		;;
+	esac
+}
+
+mediatek_setup_macs()
+{
+	local board="$1"
+
+	case $board in
+	netgear,ex6250-v2)
+		lan_mac=$(mtd_get_mac_ascii Config mac)
+		label_mac=$lan_mac
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+mediatek_setup_interfaces $board
+mediatek_setup_macs $board
+board_config_flush
+
+exit 0

target/linux/mediatek/mt7629/base-files/etc/init.d/bootcount

@@ -0,0 +1,17 @@
+#!/bin/sh /etc/rc.common
+# SPDX-License-Identifier: GPL-2.0-only
+
+START=99
+
+boot() {
+	case $(board_name) in
+	iptime,a6004mx)
+		if [ `fw_printenv boot_sector` = "boot_sector=B" ]; then
+			echo "bootcount: boot_sector must be A. Rebooting..."
+			fw_setenv boot_sector A
+			reboot
+			exit 1
+		fi
+		;;
+	esac
+}

target/linux/mediatek/mt7629/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,19 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	iptime,a6004mx)
+		nand_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}