Initial commit

target/linux/mvebu/image/Makefile

@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2012-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-project.org
+
+JFFS2_BLOCKSIZE = 128k
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+DEVICE_VARS += BOOT_SCRIPT UBOOT
+KERNEL_LOADADDR := 0x00008000
+
+define Build/boot-scr
+	rm -f $@-boot.scr
+	sed \
+		-e 's#@ROOT@#$(IMG_PART_SIGNATURE)#g' \
+		-e 's#@DTB@#$(firstword $(DEVICE_DTS))#g' \
+		$(BOOT_SCRIPT).bootscript > $@-new.bootscript
+	mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d $@-new.bootscript $@-boot.scr
+endef
+
+define Build/boot-img
+	rm -f $@.boot
+	mkfs.fat -C $@.boot $$(( $(CONFIG_TARGET_KERNEL_PARTSIZE) * 1024 ))
+	$(foreach dts,$(DEVICE_DTS), mcopy -i $@.boot $(KDIR)/image-$(dts).dtb ::$(dts).dtb;)
+	mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_NAME)
+	-mcopy -i $@.boot $@-boot.scr ::boot.scr
+endef
+
+define Build/boot-img-ext4
+	rm -fR $@.boot
+	mkdir -p $@.boot
+	$(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
+	$(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
+	-$(CP) $@-boot.scr $@.boot/boot.scr
+	make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M \
+		$(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
+		$@.bootimg $@.boot
+endef
+
+define Build/buffalo-kernel-jffs2
+	rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
+	mkdir -p $(KDIR)/kernel_jffs2
+	dd if=/dev/zero of=$@.fakerd bs=131008 count=1 conv=sync
+	$(STAGING_DIR_HOST)/bin/mkimage \
+		-T ramdisk -A $(LINUX_KARCH) -O linux -C gzip -n 'fake initrd' \
+		-d $@.fakerd $(KDIR)/kernel_jffs2/initrd.buffalo
+	cp $@ $(KDIR)/kernel_jffs2/uImage.buffalo
+	$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+		--little-endian -v --squash-uids -q -f -n -x lzma -x rtime -m none \
+		--eraseblock=128KiB --pad=$(KERNEL_SIZE) -d $(KDIR)/kernel_jffs2 -o $@
+	rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
+endef
+
+define Build/buffalo-kernel-ubifs
+	rm -rf $@-ubidir
+	mkdir -p $@-ubidir
+	mv $@ $@-ubidir/uImage.buffalo
+	touch $@
+	$(call Build/append-uImage-fakehdr, ramdisk)
+	mv $@ $@-ubidir/initrd.buffalo
+	$(STAGING_DIR_HOST)/bin/mkfs.ubifs $(KERNEL_UBIFS_OPTS) -r $@-ubidir $@
+endef
+
+# Some info about Ctera firmware:
+# 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
+# 2. It contains two images: kernel and romdisk. Both are required.
+# 3. Every image has header and trailer file.
+# 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
+# 5. In header file are some strings used to describe image. It was decoded from
+#    factory image.
+# 6. Version format in header file is restricted by Original FW.
+# 7. Trailer file contains MD5 sum string of header and image file.
+# 8. Firmware file must have <=24MB size.
+
+define Build/ctera-firmware
+	mkdir -p $@.tmp
+
+	# Prepare header and trailer file for kernel
+	echo "# CTera firmware information file" > $@.tmp/header
+	echo "image_type=kernel" >> $@.tmp/header
+	echo "arch=ARM" >> $@.tmp/header
+	echo "board=2Drive_A" >> $@.tmp/header
+	echo "version=5.5.165.61499" >> $@.tmp/header
+	echo "kernel_cmd=console=ttyS0,115200 earlycon" >> $@.tmp/header
+	echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
+		>> $@.tmp/header
+
+	cp $@ $@.tmp/kernel
+
+	echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
+		> $@.tmp/trailer
+
+	tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+		-H gnu -C $@.tmp -cf $@.tar header kernel trailer
+
+	# Prepare header and trailer file for fake romdisk
+	echo "# CTera firmware information file" > $@.tmp/header
+	echo "image_type=romdisk" >> $@.tmp/header
+	echo "initrd=yes" >> $@.tmp/header
+	echo "arch=ARM" >> $@.tmp/header
+	echo "board=2Drive_A" >> $@.tmp/header
+	echo "version=5.5.165.61499" >> $@.tmp/header
+	echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
+		>> $@.tmp/header
+
+	rm -f $@
+	touch $@
+	$(call Build/append-uImage-fakehdr, ramdisk)
+	cp $@ $@.tmp/romdisk
+
+	echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
+		> $@.tmp/trailer
+
+	tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+		-H gnu -C $@.tmp -rf $@.tar header romdisk trailer
+
+	mv $@.tar $@
+	rm -rf $@.tmp
+endef
+
+define Build/sdcard-img
+	SIGNATURE="$(IMG_PART_SIGNATURE)" \
+	./gen_mvebu_sdcard_img.sh $@ \
+		$(if $(UBOOT),$(STAGING_DIR_IMAGE)/$(UBOOT)) \
+		c $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+		83 $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS)
+endef
+
+define Build/sdcard-img-ext4
+	SIGNATURE="$(IMG_PART_SIGNATURE)" \
+	./gen_mvebu_sdcard_img.sh $@ \
+		$(if $(UBOOT),$(STAGING_DIR_IMAGE)/$(UBOOT)) \
+		83 $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.bootimg \
+		83 $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS)
+endef
+
+define Build/uDPU-firmware
+	(rm -fR $@-fw; mkdir -p $@-fw)
+	$(CP) $(BIN_DIR)/$(DEVICE_IMG_PREFIX)-initramfs.itb $@-fw/recovery.itb
+	$(CP) $@-boot.scr $@-fw/boot.scr
+	$(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+		$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+		-f $@-fw/rootfs.tgz -C $(TARGET_DIR) .
+	$(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+		$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+		-f $@-fw/boot.tgz -C $@.boot .
+	$(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+		$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+		-f $(KDIR_TMP)/$(DEVICE_IMG_PREFIX)-firmware.tgz -C $@-fw .
+endef
+
+define Device/Default
+  PROFILES := Default
+  DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
+  DEVICE_DTS_DIR := $(DTS_DIR)
+  BOARD_NAME = $$(DEVICE_DTS)
+  KERNEL_NAME := zImage
+  KERNEL := kernel-bin | append-dtb | uImage none
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  UBINIZE_OPTS := -E 5
+  UBOOT :=
+  BOOT_SCRIPT :=
+endef
+
+define Device/Default-arm64
+  BOOT_SCRIPT := generic-arm64
+  DEVICE_DTS_DIR := $(DTS_DIR)/marvell
+  IMAGES := sdcard.img.gz
+  IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+  KERNEL_NAME := Image
+  KERNEL := kernel-bin
+endef
+
+define Device/NAND-128K
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+endef
+
+define Device/NAND-256K
+  BLOCKSIZE := 256k
+  PAGESIZE := 4096
+endef
+
+define Device/NAND-512K
+  BLOCKSIZE := 512k
+  PAGESIZE := 4096
+endef
+
+include $(SUBTARGET).mk
+
+$(eval $(call BuildImage))

target/linux/mvebu/image/clearfog-pro.bootscript

@@ -0,0 +1,16 @@
+# Standard Boot-Script
+# use only well-known variable names provided by U-Boot Distro boot
+# This script assumes the boot partition to be partition 1
+# and that the root partition is always partition 2.
+# The vendor u-boot ships without setexpr compiled in.
+
+# figure out partition uuid to pass to the kernel as root=
+part uuid ${devtype} ${devnum}:2 uuid
+
+# generate bootargs (rootfs)
+setenv bootargs root=PARTUUID=${uuid} rootfstype=auto rootwait
+
+echo "Booting Linux with ${bootargs}"
+load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} @DTB@.dtb
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} Image
+booti ${kernel_addr_r} - ${fdt_addr_r}

target/linux/mvebu/image/clearfog.bootscript

@@ -0,0 +1,23 @@
+# Standard Boot-Script
+# use only well-known variable names provided by U-Boot Distro boot
+# This script assumes that there is a boot partition,
+# and that the root partition is always the next one.
+
+# rootfs is always on the next partition
+setexpr openwrt_rootpart ${distro_bootpart} + 1
+
+# figure out partition uuid to pass to the kernel as root=
+part uuid ${devtype} ${devnum}:${openwrt_rootpart} uuid
+
+# generate bootargs (rootfs)
+setenv bootargs ${bootargs} root=PARTUUID=${uuid} rootfstype=auto rootwait
+
+# add console= option to bootargs, if any
+if test -n "${console}"; then
+	setenv bootargs ${bootargs} console=${console}
+fi
+
+echo "Booting Linux with ${bootargs}"
+load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} @DTB@.dtb
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} zImage
+bootz ${kernel_addr_r} - ${fdt_addr_r}

target/linux/mvebu/image/cortexa53.mk

@@ -0,0 +1,102 @@
+define Device/glinet_gl-mv1000
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-MV1000
+  SOC := armada-3720
+endef
+TARGET_DEVICES += glinet_gl-mv1000
+
+define Device/globalscale_espressobin
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := ESPRESSObin
+  DEVICE_VARIANT := Non-eMMC
+  DEVICE_ALT0_VENDOR := Marvell
+  DEVICE_ALT0_MODEL := Armada 3700 Community Board
+  DEVICE_ALT0_VARIANT := Non-eMMC
+  SOC := armada-3720
+  BOOT_SCRIPT := espressobin
+endef
+TARGET_DEVICES += globalscale_espressobin
+
+define Device/globalscale_espressobin-emmc
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := ESPRESSObin
+  DEVICE_VARIANT := eMMC
+  DEVICE_ALT0_VENDOR := Marvell
+  DEVICE_ALT0_MODEL := Armada 3700 Community Board
+  DEVICE_ALT0_VARIANT := eMMC
+  SOC := armada-3720
+  BOOT_SCRIPT := espressobin
+endef
+TARGET_DEVICES += globalscale_espressobin-emmc
+
+define Device/globalscale_espressobin-ultra
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := ESPRESSObin
+  DEVICE_VARIANT := Ultra
+  DEVICE_PACKAGES += kmod-i2c-pxa kmod-rtc-pcf8563
+  SOC := armada-3720
+  BOOT_SCRIPT := espressobin
+endef
+TARGET_DEVICES += globalscale_espressobin-ultra
+
+define Device/globalscale_espressobin-v7
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := ESPRESSObin
+  DEVICE_VARIANT := V7 Non-eMMC
+  DEVICE_ALT0_VENDOR := Marvell
+  DEVICE_ALT0_MODEL := Armada 3700 Community Board
+  DEVICE_ALT0_VARIANT := V7 Non-eMMC
+  SOC := armada-3720
+  BOOT_SCRIPT := espressobin
+endef
+TARGET_DEVICES += globalscale_espressobin-v7
+
+define Device/globalscale_espressobin-v7-emmc
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := ESPRESSObin
+  DEVICE_VARIANT := V7 eMMC
+  DEVICE_ALT0_VENDOR := Marvell
+  DEVICE_ALT0_MODEL := Armada 3700 Community Board
+  DEVICE_ALT0_VARIANT := V7 eMMC
+  SOC := armada-3720
+  BOOT_SCRIPT := espressobin
+endef
+TARGET_DEVICES += globalscale_espressobin-v7-emmc
+
+define Device/marvell_armada-3720-db
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada 3720 Development Board (DB-88F3720-DDR3)
+  DEVICE_DTS := armada-3720-db
+endef
+TARGET_DEVICES += marvell_armada-3720-db
+
+define Device/methode_udpu
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Methode
+  DEVICE_MODEL := micro-DPU (uDPU)
+  DEVICE_DTS := armada-3720-uDPU
+  KERNEL_LOADADDR := 0x00800000
+  KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+  KERNEL_INITRAMFS_SUFFIX := .itb
+  DEVICE_PACKAGES += f2fs-tools fdisk kmod-i2c-pxa kmod-hwmon-lm75
+  DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(2)
+  IMAGES := firmware.tgz
+  IMAGE/firmware.tgz := boot-scr | boot-img-ext4 | uDPU-firmware | append-metadata
+  BOOT_SCRIPT := udpu
+endef
+TARGET_DEVICES += methode_udpu
+
+define Device/methode_edpu
+  $(call Device/methode_udpu)
+  DEVICE_MODEL := eDPU
+  DEVICE_DTS := armada-3720-eDPU
+  KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+endef
+TARGET_DEVICES += methode_edpu

target/linux/mvebu/image/cortexa72.mk

@@ -0,0 +1,118 @@
+define Device/FitImage
+  KERNEL_SUFFIX := -uImage.itb
+  KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+  KERNEL_NAME := Image
+endef
+
+define Device/UbiFit
+  KERNEL_IN_UBI := 1
+  IMAGES := factory.ubi sysupgrade.bin
+  IMAGE/factory.ubi := append-ubi
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/globalscale_mochabin
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Globalscale
+  DEVICE_MODEL := MOCHAbin
+  SOC := armada-7040
+endef
+TARGET_DEVICES += globalscale_mochabin
+
+define Device/marvell_armada7040-db
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada 7040 Development Board
+  DEVICE_DTS := armada-7040-db
+  IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+endef
+TARGET_DEVICES += marvell_armada7040-db
+
+define Device/marvell_armada8040-db
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada 8040 Development Board
+  DEVICE_DTS := armada-8040-db
+  IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+endef
+TARGET_DEVICES += marvell_armada8040-db
+
+define Device/marvell_macchiatobin-doubleshot
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := SolidRun
+  DEVICE_MODEL := MACCHIATObin
+  DEVICE_VARIANT := Double Shot
+  DEVICE_ALT0_VENDOR := SolidRun
+  DEVICE_ALT0_MODEL := Armada 8040 Community Board
+  DEVICE_ALT0_VARIANT := Double Shot
+  DEVICE_PACKAGES += kmod-i2c-mux-pca954x
+  DEVICE_DTS := armada-8040-mcbin
+  SUPPORTED_DEVICES := marvell,armada8040-mcbin-doubleshot marvell,armada8040-mcbin
+endef
+TARGET_DEVICES += marvell_macchiatobin-doubleshot
+
+define Device/marvell_macchiatobin-singleshot
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := SolidRun
+  DEVICE_MODEL := MACCHIATObin
+  DEVICE_VARIANT := Single Shot
+  DEVICE_ALT0_VENDOR := SolidRun
+  DEVICE_ALT0_MODEL := Armada 8040 Community Board
+  DEVICE_ALT0_VARIANT := Single Shot
+  DEVICE_PACKAGES += kmod-i2c-mux-pca954x
+  DEVICE_DTS := armada-8040-mcbin-singleshot
+  SUPPORTED_DEVICES := marvell,armada8040-mcbin-singleshot
+endef
+TARGET_DEVICES += marvell_macchiatobin-singleshot
+
+define Device/mikrotik_rb5009
+  $(call Device/Default-arm64)
+  $(Device/NAND-128K)
+  $(call Device/FitImage)
+  $(call Device/UbiFit)
+  DEVICE_VENDOR := MikroTik
+  DEVICE_MODEL := RB5009
+  SOC := armada-7040
+  KERNEL_LOADADDR := 0x22000000
+  DEVICE_PACKAGES += kmod-i2c-gpio yafut
+endef
+TARGET_DEVICES += mikrotik_rb5009
+
+define Device/marvell_clearfog-gt-8k
+  $(call Device/Default-arm64)
+  DEVICE_VENDOR := SolidRun
+  DEVICE_MODEL := Clearfog
+  DEVICE_VARIANT := GT-8K
+  DEVICE_PACKAGES += kmod-i2c-mux-pca954x kmod-crypto-hw-safexcel
+  DEVICE_DTS := armada-8040-clearfog-gt-8k
+  SUPPORTED_DEVICES := marvell,armada8040-clearfog-gt-8k
+endef
+TARGET_DEVICES += marvell_clearfog-gt-8k
+
+define Device/iei_puzzle-m901
+  $(call Device/Default-arm64)
+  SOC := cn9131
+  DEVICE_VENDOR := iEi
+  DEVICE_MODEL := Puzzle-M901
+  DEVICE_PACKAGES += kmod-rtc-ds1307
+endef
+TARGET_DEVICES += iei_puzzle-m901
+
+define Device/iei_puzzle-m902
+  $(call Device/Default-arm64)
+  SOC := cn9132
+  DEVICE_VENDOR := iEi
+  DEVICE_MODEL := Puzzle-M902
+  DEVICE_PACKAGES += kmod-rtc-ds1307
+endef
+TARGET_DEVICES += iei_puzzle-m902
+
+define Device/solidrun_clearfog-pro
+  $(call Device/Default-arm64)
+  SOC := cn9130
+  DEVICE_VENDOR := SolidRun
+  DEVICE_MODEL := ClearFog Pro
+  DEVICE_PACKAGES += kmod-i2c-mux-pca954x
+  BOOT_SCRIPT := clearfog-pro
+endef
+TARGET_DEVICES += solidrun_clearfog-pro

target/linux/mvebu/image/cortexa9.mk

@@ -0,0 +1,448 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2012-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-project.org
+
+DTS_DIR := $(DTS_DIR)/marvell
+
+define Build/fortigate-header
+  ( \
+    dd if=/dev/zero bs=384 count=1 2>/dev/null; \
+    datalen=$$(wc -c $@ | cut -d' ' -f1); \
+    datalen=$$(printf "%08x" $$datalen); \
+    datalen="$${datalen:6:2}$${datalen:4:2}$${datalen:2:2}$${datalen:0:2}"; \
+    printf $$(echo "00020000$${datalen}ffff0000ffff0000" | sed 's/../\\x&/g'); \
+    dd if=/dev/zero bs=112 count=1 2>/dev/null; \
+    cat $@; \
+  ) > $@.new
+  mv $@.new $@
+endef
+
+define Build/seil-header
+  ( \
+    data_size_crc="$$(gzip -c $@ | tail -c8 | \
+        od -An -tx8 --endian little | tr -d ' \n')"; \
+    printf "SEIL2015"; \
+    printf "$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)" | \
+        dd bs=80 count=1 conv=sync 2>/dev/null; \
+    printf "$$(echo $${data_size_crc:8:8} | sed 's/../\\x&/g')"; \
+    printf "\x00\x00\x00\x01\x00\x00\x00\x09\x00\x00\x00\x63"; \
+    printf "$(REVISION)" | dd bs=32 count=1 conv=sync 2>/dev/null; \
+    printf "\x00\x00\x00\x00"; \
+    printf "$$(echo $${data_size_crc:0:8} | sed 's/../\\x&/g')"; \
+    cat $@; \
+  ) > $@.new
+  mv $@.new $@
+endef
+
+define Device/dsa-migration
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
+define Device/kernel-size-migration
+  DEVICE_COMPAT_VERSION := 2.0
+  DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (up to 19.07) due to kernel size restrictions. \
+	Upgrade via sysupgrade mechanism is not possible, so new installation via factory style image is required.
+endef
+
+define Device/buffalo_ls220de
+  $(Device/NAND-128K)
+  DEVICE_VENDOR := Buffalo
+  DEVICE_MODEL := LinkStation LS220DE
+  KERNEL_UBIFS_OPTS = -m $$(PAGESIZE) -e 124KiB -c 172 -x none
+  KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-ubifs
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
+  DEVICE_DTS := armada-370-buffalo-ls220de
+  DEVICE_PACKAGES :=  \
+    kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-linkstation-poweroff \
+    kmod-md-mod kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-fs-xfs \
+    mdadm mkf2fs e2fsprogs partx-utils
+endef
+TARGET_DEVICES += buffalo_ls220de
+
+define Device/buffalo_ls421de
+  $(Device/NAND-128K)
+  DEVICE_VENDOR := Buffalo
+  DEVICE_MODEL := LinkStation LS421DE
+  SUBPAGESIZE :=
+  KERNEL_SIZE := 33554432
+  FILESYSTEMS := squashfs ubifs
+  KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-jffs2
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
+  DEVICE_DTS := armada-370-buffalo-ls421de
+  DEVICE_PACKAGES :=  \
+    kmod-rtc-rs5c372a kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-usb3 \
+    kmod-linkstation-poweroff kmod-md-raid0 kmod-md-raid1 kmod-md-mod \
+    kmod-fs-xfs mkf2fs e2fsprogs partx-utils
+endef
+TARGET_DEVICES += buffalo_ls421de
+
+define Device/ctera_c200-v2
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  BLOCKSIZE := 128k
+  DEVICE_VENDOR := Ctera
+  DEVICE_MODEL := C200
+  DEVICE_VARIANT := V2
+  SOC := armada-370
+  KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
+  KERNEL_IN_UBI :=
+  KERNEL_SUFFIX := -factory.firm
+  DEVICE_PACKAGES :=  \
+    kmod-gpio-button-hotplug kmod-hwmon-drivetemp kmod-hwmon-nct7802 \
+    kmod-rtc-s35390a kmod-usb3 kmod-usb-ledtrig-usbport
+  IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += ctera_c200-v2
+
+define Device/cznic_turris-omnia
+  DEVICE_VENDOR := CZ.NIC
+  DEVICE_MODEL := Turris Omnia
+  KERNEL_INSTALL := 1
+  SOC := armada-385
+  KERNEL := kernel-bin
+  KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+  DEVICE_PACKAGES :=  \
+    mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
+    wpad-basic-mbedtls kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct \
+    kmod-mt7915-firmware partx-utils kmod-i2c-mux-pca954x kmod-leds-turris-omnia
+  IMAGES := sysupgrade.img.gz
+  IMAGE/sysupgrade.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata
+  SUPPORTED_DEVICES += armada-385-turris-omnia
+  BOOT_SCRIPT := turris-omnia
+endef
+TARGET_DEVICES += cznic_turris-omnia
+
+define Device/fortinet
+  DEVICE_VENDOR := Fortinet
+  SOC := armada-385
+  KERNEL := kernel-bin | append-dtb
+  KERNEL_SIZE := 6144k
+  IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
+    sysupgrade-tar rootfs=$$$$@ | append-metadata
+  DEVICE_PACKAGES := kmod-hwmon-nct7802
+endef
+
+define Device/fortinet_fg-30e
+  $(Device/fortinet)
+  DEVICE_MODEL := FortiGate 30E
+  DEVICE_DTS := armada-385-fortinet-fg-30e
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
+    gzip-filename FGT30E
+endef
+TARGET_DEVICES += fortinet_fg-30e
+
+define Device/fortinet_fg-50e
+  $(Device/fortinet)
+  DEVICE_MODEL := FortiGate 50E
+  DEVICE_DTS := armada-385-fortinet-fg-50e
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
+    gzip-filename FGT50E
+endef
+TARGET_DEVICES += fortinet_fg-50e
+
+define Device/fortinet_fg-51e
+  $(Device/fortinet)
+  DEVICE_MODEL := FortiGate 51E
+  DEVICE_DTS := armada-385-fortinet-fg-51e
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
+    gzip-filename FGT51E
+endef
+TARGET_DEVICES += fortinet_fg-51e
+
+define Device/fortinet_fg-52e
+  $(Device/fortinet)
+  DEVICE_MODEL := FortiGate 52E
+  DEVICE_DTS := armada-385-fortinet-fg-52e
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
+    gzip-filename FGT52E
+endef
+TARGET_DEVICES += fortinet_fg-52e
+
+define Device/fortinet_fwf-50e-2r
+  $(Device/fortinet)
+  DEVICE_MODEL := FortiWiFi 50E-2R
+  DEVICE_DTS := armada-385-fortinet-fwf-50e-2r
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
+    gzip-filename FW502R
+  DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct \
+    wpad-basic-mbedtls
+endef
+TARGET_DEVICES += fortinet_fwf-50e-2r
+
+define Device/fortinet_fwf-51e
+  $(Device/fortinet)
+  DEVICE_MODEL := FortiWiFi 51E
+  DEVICE_DTS := armada-385-fortinet-fwf-51e
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
+    gzip-filename FWF51E
+  DEVICE_PACKAGES += kmod-ath9k wpad-basic-mbedtls
+endef
+TARGET_DEVICES += fortinet_fwf-51e
+
+define Device/globalscale_mirabox
+  $(Device/NAND-512K)
+  DEVICE_VENDOR := Globalscale
+  DEVICE_MODEL := Mirabox
+  SOC := armada-370
+  SUPPORTED_DEVICES += mirabox
+endef
+TARGET_DEVICES += globalscale_mirabox
+
+define Device/iij_sa-w2
+  DEVICE_VENDOR := IIJ
+  DEVICE_MODEL := SA-W2
+  SOC := armada-380
+  KERNEL := kernel-bin | append-dtb | seil-header
+  DEVICE_DTS := armada-380-iij-sa-w2
+  IMAGE_SIZE := 15360k
+  IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
+    append-rootfs | pad-rootfs | check-size | append-metadata
+  DEVICE_PACKAGES := kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct \
+    wpad-basic-mbedtls
+endef
+TARGET_DEVICES += iij_sa-w2
+
+define Device/iptime_nas1dual
+  DEVICE_VENDOR := ipTIME
+  DEVICE_MODEL := NAS1dual
+  DEVICE_PACKAGES := kmod-hwmon-drivetemp kmod-hwmon-gpiofan kmod-usb3
+  SOC := armada-385
+  KERNEL := kernel-bin | append-dtb | iptime-naspkg nas1dual
+  KERNEL_SIZE := 6144k
+  IMAGES := sysupgrade.bin
+  IMAGE_SIZE := 64256k
+  IMAGE/sysupgrade.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
+	append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += iptime_nas1dual
+
+define Device/kobol_helios4
+  DEVICE_VENDOR := Kobol
+  DEVICE_MODEL := Helios4
+  KERNEL_INSTALL := 1
+  KERNEL := kernel-bin
+  DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
+  IMAGES := sdcard.img.gz
+  IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+  SOC := armada-388
+  UBOOT := helios4-u-boot-with-spl.kwb
+  BOOT_SCRIPT := clearfog
+endef
+TARGET_DEVICES += kobol_helios4
+
+define Device/linksys
+  $(Device/NAND-128K)
+  DEVICE_VENDOR := Linksys
+  DEVICE_PACKAGES := kmod-mwlwifi wpad-basic-mbedtls
+  IMAGES += factory.img
+  IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+	append-ubi | pad-to $$$$(PAGESIZE)
+  KERNEL_SIZE := 6144k
+endef
+
+define Device/linksys_wrt1200ac
+  $(call Device/linksys)
+  $(Device/dsa-migration)
+  DEVICE_MODEL := WRT1200AC
+  DEVICE_ALT0_VENDOR := Linksys
+  DEVICE_ALT0_MODEL := Caiman
+  DEVICE_DTS := armada-385-linksys-caiman
+  DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+  SUPPORTED_DEVICES += armada-385-linksys-caiman linksys,caiman
+endef
+TARGET_DEVICES += linksys_wrt1200ac
+
+define Device/linksys_wrt1900acs
+  $(call Device/linksys)
+  $(Device/dsa-migration)
+  DEVICE_MODEL := WRT1900ACS
+  DEVICE_VARIANT := v1
+  DEVICE_ALT0_VENDOR := Linksys
+  DEVICE_ALT0_MODEL := WRT1900ACS
+  DEVICE_ALT0_VARIANT := v2
+  DEVICE_ALT1_VENDOR := Linksys
+  DEVICE_ALT1_MODEL := Shelby
+  DEVICE_DTS := armada-385-linksys-shelby
+  DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+  SUPPORTED_DEVICES += armada-385-linksys-shelby linksys,shelby
+endef
+TARGET_DEVICES += linksys_wrt1900acs
+
+define Device/linksys_wrt1900ac-v1
+  $(call Device/linksys)
+  $(Device/kernel-size-migration)
+  DEVICE_MODEL := WRT1900AC
+  DEVICE_VARIANT := v1
+  DEVICE_ALT0_VENDOR := Linksys
+  DEVICE_ALT0_MODEL := Mamba
+  DEVICE_DTS := armada-xp-linksys-mamba
+  DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+  KERNEL_SIZE := 4096k
+  SUPPORTED_DEVICES += armada-xp-linksys-mamba linksys,mamba
+endef
+TARGET_DEVICES += linksys_wrt1900ac-v1
+
+define Device/linksys_wrt1900ac-v2
+  $(call Device/linksys)
+  $(Device/dsa-migration)
+  DEVICE_MODEL := WRT1900AC
+  DEVICE_VARIANT := v2
+  DEVICE_ALT0_VENDOR := Linksys
+  DEVICE_ALT0_MODEL := Cobra
+  DEVICE_DTS := armada-385-linksys-cobra
+  DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+  SUPPORTED_DEVICES += armada-385-linksys-cobra linksys,cobra
+endef
+TARGET_DEVICES += linksys_wrt1900ac-v2
+
+define Device/linksys_wrt3200acm
+  $(call Device/linksys)
+  $(Device/dsa-migration)
+  DEVICE_MODEL := WRT3200ACM
+  DEVICE_ALT0_VENDOR := Linksys
+  DEVICE_ALT0_MODEL := Rango
+  DEVICE_DTS := armada-385-linksys-rango
+  DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
+  SUPPORTED_DEVICES += armada-385-linksys-rango linksys,rango
+endef
+TARGET_DEVICES += linksys_wrt3200acm
+
+define Device/linksys_wrt32x
+  $(call Device/linksys)
+  $(Device/kernel-size-migration)
+  DEVICE_MODEL := WRT32X
+  DEVICE_ALT0_VENDOR := Linksys
+  DEVICE_ALT0_MODEL := Venom
+  DEVICE_DTS := armada-385-linksys-venom
+  DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
+  KERNEL_SIZE := 6144k
+  KERNEL := kernel-bin | append-dtb
+  SUPPORTED_DEVICES += armada-385-linksys-venom linksys,venom
+endef
+TARGET_DEVICES += linksys_wrt32x
+
+define Device/marvell_a370-db
+  $(Device/NAND-512K)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada 370 Development Board (DB-88F6710-BP-DDR3)
+  DEVICE_DTS := armada-370-db
+  SUPPORTED_DEVICES += armada-370-db
+endef
+TARGET_DEVICES += marvell_a370-db
+
+define Device/marvell_a370-rd
+  $(Device/NAND-512K)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada 370 RD (RD-88F6710-A1)
+  DEVICE_DTS := armada-370-rd
+  SUPPORTED_DEVICES += armada-370-rd
+endef
+TARGET_DEVICES += marvell_a370-rd
+
+define Device/marvell_a385-db-ap
+  $(Device/NAND-256K)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada 385 Development Board AP (DB-88F6820-AP)
+  DEVICE_DTS := armada-385-db-ap
+  IMAGES += factory.img
+  IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+	append-ubi | pad-to $$$$(PAGESIZE)
+  KERNEL_SIZE := 8192k
+  SUPPORTED_DEVICES += armada-385-db-ap
+endef
+TARGET_DEVICES += marvell_a385-db-ap
+
+define Device/marvell_a388-rd
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada 388 RD (RD-88F6820-AP)
+  DEVICE_DTS := armada-388-rd
+  IMAGES := firmware.bin
+  IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs
+  SUPPORTED_DEVICES := armada-388-rd marvell,a385-rd
+endef
+TARGET_DEVICES += marvell_a388-rd
+
+define Device/marvell_axp-db
+  $(Device/NAND-512K)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada XP Development Board (DB-78460-BP)
+  DEVICE_DTS := armada-xp-db
+  SUPPORTED_DEVICES += armada-xp-db
+endef
+TARGET_DEVICES += marvell_axp-db
+
+define Device/marvell_axp-gp
+  $(Device/NAND-512K)
+  DEVICE_VENDOR := Marvell
+  DEVICE_MODEL := Armada Armada XP GP (DB-MV784MP-GP)
+  DEVICE_DTS := armada-xp-gp
+  SUPPORTED_DEVICES += armada-xp-gp
+endef
+TARGET_DEVICES += marvell_axp-gp
+
+define Device/plathome_openblocks-ax3-4
+  DEVICE_VENDOR := Plat'Home
+  DEVICE_MODEL := OpenBlocks AX3
+  DEVICE_VARIANT := 4 ports
+  SOC := armada-xp
+  SUPPORTED_DEVICES += openblocks-ax3-4
+  BLOCKSIZE := 128k
+  PAGESIZE := 1
+  IMAGES += factory.img
+  IMAGE/factory.img := append-kernel | pad-to $$(BLOCKSIZE) | append-ubi
+endef
+TARGET_DEVICES += plathome_openblocks-ax3-4
+
+define Device/solidrun_clearfog-base-a1
+  DEVICE_VENDOR := SolidRun
+  DEVICE_MODEL := ClearFog Base
+  KERNEL_INSTALL := 1
+  KERNEL := kernel-bin
+  DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
+  IMAGES := sdcard.img.gz
+  IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+  DEVICE_DTS := armada-388-clearfog-base armada-388-clearfog-pro
+  UBOOT := clearfog-u-boot-with-spl.kwb
+  BOOT_SCRIPT := clearfog
+  SUPPORTED_DEVICES += armada-388-clearfog-base
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Ethernet interface rename has been dropped
+endef
+TARGET_DEVICES += solidrun_clearfog-base-a1
+
+define Device/solidrun_clearfog-pro-a1
+  $(Device/dsa-migration)
+  DEVICE_VENDOR := SolidRun
+  DEVICE_MODEL := ClearFog Pro
+  KERNEL_INSTALL := 1
+  KERNEL := kernel-bin
+  DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
+  IMAGES := sdcard.img.gz
+  IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+  DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
+  UBOOT := clearfog-u-boot-with-spl.kwb
+  BOOT_SCRIPT := clearfog
+  SUPPORTED_DEVICES += armada-388-clearfog armada-388-clearfog-pro
+endef
+TARGET_DEVICES += solidrun_clearfog-pro-a1
+
+define Device/synology_ds213j
+  DEVICE_VENDOR := Synology
+  DEVICE_MODEL := DS213j
+  KERNEL_SIZE := 6912k
+  IMAGE_SIZE := 7168k
+  FILESYSTEMS := squashfs ubifs
+  KERNEL := kernel-bin | append-dtb | uImage none
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
+  DEVICE_DTS := armada-370-synology-ds213j
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+                          check-size | append-metadata
+  DEVICE_PACKAGES := \
+    kmod-rtc-s35390a kmod-hwmon-gpiofan kmod-hwmon-drivetemp \
+    kmod-md-raid0 kmod-md-raid1 kmod-md-mod e2fsprogs mdadm \
+    -ppp -kmod-nft-offload -firewall4 -dnsmasq -odhcpd-ipv6only
+endef
+TARGET_DEVICES += synology_ds213j

target/linux/mvebu/image/espressobin.bootscript

@@ -0,0 +1,34 @@
+# Bootscript for Globalscale ESPRESSOBin Board
+
+# Set distro variables if necessary for compability with downstream firmware
+if test -z "${kernel_addr_r}"; then
+	setenv kernel_addr_r 0x7000000
+fi
+
+if test -z "${fdt_add_r}"; then
+	setenv fdt_addr_r 0x6f00000
+fi
+
+if test -z "${devtype}"; then
+	setenv devtype mmc
+fi
+
+if test -z "${devnum}"; then
+	if mmc dev 0; then
+		setenv devnum 0
+	elif mmc dev 1; then
+		setenv devnum 1
+	fi
+fi
+
+# figure out partition uuid to pass to the kernel as root=
+part uuid ${devtype} ${devnum}:2 uuid
+
+setenv console "console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000"
+setenv bootargs "root=PARTUUID=${uuid} rw rootwait ${console}"
+
+echo "Booting Linux from ${devtype} ${devnum} with args: ${bootargs}"
+load ${devtype} ${devnum}:1 ${fdt_addr_r} @DTB@.dtb
+load ${devtype} ${devnum}:1 ${kernel_addr_r} Image
+
+booti ${kernel_addr_r} - ${fdt_addr_r}

target/linux/mvebu/image/gen_mvebu_sdcard_img.sh

@@ -0,0 +1,70 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (C) 2016 Josua Mayer
+
+usage() {
+	echo "$0 <outfile> [<bootloader> <type_partitionN> <size_partitionN> <img_partitionN>]?"
+}
+
+# always require first 2 or 3 arguments
+# then in pairs up to 8 more for a total of up to 4 partitions
+if [ $# -lt 1 ] || [ $# -gt 14 ] || [ $((($# - 1) % 3)) -ne 0 ]; then
+	if [ $# -lt 2 ] || [ $# -gt 15 ] || [ $((($# - 2) % 3)) -ne 0 ]; then
+		usage
+		exit 1
+	else
+		BOOTLOADER="$2"
+	fi
+fi
+
+set -e
+
+# parameters
+OUTFILE="$1"; shift
+if [ -n "$BOOTLOADER" ]; then
+	shift
+fi
+
+# generate image file
+printf "Creating %s from /dev/zero: " "$OUTFILE"
+dd if=/dev/zero of="$OUTFILE" bs=512 count=1 >/dev/null
+printf "Done\n"
+
+while [ "$#" -ge 3 ]; do
+	ptgen_args="$ptgen_args -t $1 -p $(($2 * 1024 + 256))"
+	parts="$parts$3 "
+	shift; shift; shift
+done
+
+head=16
+sect=63
+
+# create real partition table using fdisk
+printf "Creating partition table: "
+set $(ptgen -o "$OUTFILE" -h $head -s $sect -l 1024 -S 0x$SIGNATURE $ptgen_args)
+printf "Done\n"
+
+# install bootloader
+if [ -n "$BOOTLOADER" ]; then
+	printf "Writing bootloader: "
+	dd of="$OUTFILE" if="$BOOTLOADER" bs=512 seek=1 conv=notrunc 2>/dev/null
+	printf "Done\n"
+fi
+
+i=1
+while [ "$#" -ge 2 ]; do
+	img="${parts%% *}"
+	parts="${parts#* }"
+
+	printf "Writing %s to partition %i: " "$img" $i
+	(
+		cat "$img"
+		# add padding to avoid leaving behind old overlay fs data
+		dd if=/dev/zero bs=128k count=1 2>/dev/null
+	) | dd of="$OUTFILE" bs=512 seek=$(($1 / 512)) conv=notrunc 2>/dev/null
+	printf "Done\n"
+
+	i=$((i+1))
+	shift; shift
+done

target/linux/mvebu/image/generic-arm64.bootscript

@@ -0,0 +1,24 @@
+setenv bootargs "root=PARTUUID=@ROOT@-02 rw rootwait"
+
+if test -n "${console}"; then
+	setenv bootargs "${bootargs} ${console}"
+fi
+
+if mmc dev 0; then
+	setenv mmcdev 0
+elif mmc dev 1; then
+	setenv mmcdev 1
+fi
+
+if test -n "${fdt_addr_r}"; then
+       setenv fdt_addr ${fdt_addr_r}
+fi
+
+if test -n "${kernel_addr_r}"; then
+       setenv kernel_addr ${kernel_addr_r}
+fi
+
+load mmc ${mmcdev}:1 ${fdt_addr} @DTB@.dtb
+load mmc ${mmcdev}:1 ${kernel_addr} Image
+
+booti ${kernel_addr} - ${fdt_addr}

target/linux/mvebu/image/turris-omnia.bootscript

@@ -0,0 +1,32 @@
+# Determine root device
+setexpr rootpart ${distro_bootpart} + 1
+if test ${devtype} = mmc -a ${devnum} = 0; then
+	setenv rootdev /dev/mmcblk0p${rootpart}
+elif test ${devtype} = scsi -a ${devnum} = 0; then
+	setenv rootdev /dev/sda${rootpart}
+else
+	# New U-Boot only
+	part uuid ${devtype} ${devnum}:${rootpart} uuid
+	setenv rootdev PARTUUID=${uuid}
+fi
+setenv bootargs earlyprintk console=ttyS0,115200 root=${rootdev} rootfstype=auto rootwait
+
+# Load device tree and prepare for modification
+load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} @DTB@.dtb
+fdt addr ${fdt_addr_r}
+fdt resize
+
+# Enable SFP cage, if module is present
+i2c dev 0
+i2c mw 0x70 0.0 0xf
+i2c read 0x71 0 1 0x00fffff1
+setexpr.b mod_def0 *0x00fffff1 \& 0x10
+if test ${mod_def0} -eq 0; then
+	fdt set /sfp status okay
+	fdt rm /soc/internal-regs/ethernet@34000 phy-handle
+	fdt set /soc/internal-regs/ethernet@34000 managed in-band-status
+fi
+
+# Load kernel and boot
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} zImage
+bootz ${kernel_addr_r} - ${fdt_addr_r}

target/linux/mvebu/image/udpu.bootscript

@@ -0,0 +1,38 @@
+# Bootscript for Methode uDPU device
+# Device and variables may vary between different revisions
+# of device, so we need to make sure everything is set correctly.
+
+# Set the LED's correctly
+gpio clear 12; gpio clear 40; gpio clear 45;
+
+# Find eMMC device,
+if mmc dev 0; then
+	setenv mmcdev 0
+	setenv rootdev 'root=/dev/mmcblk0p3'
+elif mmc dev 1; then
+	setenv mmcdev 1
+	setenv rootdev 'root=/dev/mmcblk1p3'
+fi
+
+# Set the variables if necessary
+if test ${kernel_addr_r}; then
+	setenv kernel_addr_r 0x5000000
+fi
+
+if test ${fdt_add_r}; then
+	setenv fdt_addr_r 0x4f00000
+fi
+
+setenv console 'console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 rootfs_mount_options.compress_algorithm=zstd'
+setenv bootargs ${console} $rootdev rw rootwait
+
+load mmc ${mmcdev}:1 ${fdt_addr_r} @DTB@.dtb
+load mmc ${mmcdev}:1 ${kernel_addr_r} Image
+
+booti ${kernel_addr_r} - ${fdt_addr_r}
+
+# If the boot command fails, fallback to recovery image
+echo '-- Boot failed, falling back to the recovery image --'
+setenv bootargs $console
+load mmc ${mmcdev}:2 ${kernel_addr_r} recovery.itb
+bootm ${kernel_addr_r}