Initial commit

target/linux/qualcommax/ipq60xx/base-files/etc/board.d/01_leds

@@ -0,0 +1,18 @@
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+yuncore,fap650)
+	ucidef_set_led_netdev "wlan5ghz" "WLAN 5GHz LED" "blue:wlan-5ghz" "wlan0" "tx rx"
+	ucidef_set_led_netdev "wlan2ghz" "WLAN 2.4GHz LED" "green:wlan-2ghz" "wlan1" "tx rx"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network

@@ -0,0 +1,34 @@
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq60xx_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	8devices,mango-dvk)
+		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
+		;;
+	netgear,wax214)
+		ucidef_set_interfaces_lan_wan "lan"
+		;;
+	yuncore,fap650)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	*)
+		echo "Unsupported hardware. Network interfaces not initialized"
+		;;
+	esac
+}
+
+board_config_update
+board=$(board_name)
+ipq60xx_setup_interfaces $board
+board_config_flush
+
+exit 0

target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath11k/IPQ6018/hw1.0/cal-ahb-c000000.wifi.bin")
+	case "$board" in
+	8devices,mango-dvk)
+		caldata_extract "0:ART" 0x1000 0x20000
+		;;
+	netgear,wax214)
+		caldata_extract "0:art" 0x1000 0x10000
+		;;
+	yuncore,fap650)
+		caldata_extract "0:art" 0x1000 0x20000
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac

target/linux/qualcommax/ipq60xx/base-files/etc/init.d/bootcount

@@ -0,0 +1,12 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	case $(board_name) in
+	yuncore,fap650)
+		fw_setenv owrt_bootcount 0
+	;;
+	esac
+}
+

target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,55 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv head'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+platform_check_image() {
+	return 0;
+}
+
+
+yuncore_fap650_env_setup() {
+	local ubifile=$(board_name)
+	local active=$(fw_printenv -n owrt_slotactive)
+	[ -z "$active" ] && active=$(hexdump -s 0x94 -n 4 -e '4 "%d"' /dev/mtd$(find_mtd_index 0:bootconfig))
+	cat > /tmp/env_tmp << EOF
+owrt_slotactive=${active}
+owrt_bootcount=0
+bootfile=${ubifile}.ubi
+owrt_bootcountcheck=if test \$owrt_bootcount > 4; then run owrt_tftprecover; fi; if test \$owrt_bootcount = 3; then run owrt_slotswap; else echo bootcountcheck successfull; fi
+owrt_bootinc=if test \$owrt_bootcount < 5; then echo save env part; setexpr owrt_bootcount \${owrt_bootcount} + 1 && saveenv; else echo save env skipped; fi; echo current bootcount: \$owrt_bootcount
+bootcmd=run owrt_bootinc && run owrt_bootcountcheck && run owrt_slotselect && run owrt_bootlinux
+owrt_bootlinux=echo booting linux... && ubi part fs && ubi read 0x44000000 kernel && bootm; reset
+owrt_setslot0=setenv bootargs console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:rootfs rootfstype=squashfs rootwait swiotlb=1 && setenv mtdparts mtdparts=nand0:0x3c00000@0(fs)
+owrt_setslot1=setenv bootargs console=ttyMSM0,115200n8 ubi.mtd=rootfs_1 root=mtd:rootfs rootfstype=squashfs rootwait swiotlb=1 && setenv mtdparts mtdparts=nand0:0x3c00000@0x3c00000(fs)
+owrt_slotswap=setexpr owrt_slotactive 1 - \${owrt_slotactive} && saveenv && echo slot swapped. new active slot: \$owrt_slotactive
+owrt_slotselect=setenv mtdids nand0=nand0,nand1=spi0.0; if test \$owrt_slotactive = 0; then run owrt_setslot0; else run owrt_setslot1; fi
+owrt_tftprecover=echo trying to recover firmware with tftp... && sleep 10 && dhcp && flash rootfs && flash rootfs_1 && setenv owrt_bootcount 0 && setenv owrt_slotactive 0 && saveenv && reset
+owrt_env_ver=7
+EOF
+	fw_setenv --script /tmp/env_tmp
+}
+
+platform_do_upgrade() {
+	case "$(board_name)" in
+	netgear,wax214)
+		nand_do_upgrade "$1"
+		;;
+	yuncore,fap650)
+		[ "$(fw_printenv -n owrt_env_ver 2>/dev/null)" != "7" ] && yuncore_fap650_env_setup
+		local active="$(fw_printenv -n owrt_slotactive 2>/dev/null)"
+		if [ "$active" = "1" ]; then
+			CI_UBIPART="rootfs"
+		else
+			CI_UBIPART="rootfs_1"
+		fi
+		fw_setenv owrt_bootcount 0
+		fw_setenv owrt_slotactive $((1 - active))
+		nand_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}

target/linux/qualcommax/ipq60xx/config-default

@@ -0,0 +1,11 @@
+CONFIG_IPQ_GCC_6018=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_PINCTRL_IPQ6018=y
+CONFIG_QCOM_APM=y
+# CONFIG_QCOM_CLK_SMD_RPM is not set
+# CONFIG_QCOM_RPMPD is not set
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_CPR3=y
+# CONFIG_REGULATOR_CPR3_NPU is not set
+CONFIG_REGULATOR_CPR4_APSS=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y

target/linux/qualcommax/ipq60xx/target.mk

@@ -0,0 +1,8 @@
+SUBTARGET:=ipq60xx
+FEATURES += source-only
+BOARDNAME:=Qualcomm Atheros IPQ60xx
+DEFAULT_PACKAGES += ath11k-firmware-ipq6018
+
+define Target/Description
+	Build firmware images for Qualcomm Atheros IPQ60xx based boards.
+endef