Initial commit

target/linux/ramips/dts/mt7621_dlink_covr-x1860-a1.dts

@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "dlink,covr-x1860-a1", "mediatek,mt7621-soc";
+	model = "D-Link COVR-X1860 A1";
+
+	aliases {
+		led-boot = &status_orange;
+		led-failsafe = &status_red;
+		led-running = &status_white;
+		led-upgrade = &status_red;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_white: power {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		status_orange: status_orange {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		status_red: status_red {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	virtual_flash {
+		compatible = "mtd-concat";
+
+		devices = <&fwconcat0 &fwconcat1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi";
+				reg = <0x0 0x0>;
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "config";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "factory";
+			reg = <0x100000 0x80000>;
+			read-only;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eeprom_factory_0: eeprom@0 {
+					reg = <0x0 0xe00>;
+				};
+
+				precal_factory_e10: precal@e10 {
+					reg = <0xe10 0x19c10>;
+				};
+			};
+		};
+
+		partition@180000 {
+			label = "config2";
+			reg = <0x180000 0x40000>;
+			read-only;
+		};
+
+		partition@1c0000 {
+			label = "kernel";
+			reg = <0x1c0000 0x800000>;
+		};
+
+		fwconcat0: partition@9c0000 {
+			label = "fwconcat0";
+			reg = <0x9c0000 0x2000000>;
+		};
+
+		partition@29c0000 {
+			label = "kernel2";
+			reg = <0x29c0000 0x800000>;
+			read-only;
+		};
+
+		fwconcat1: partition@31c0000 {
+			label = "fwconcat1";
+			reg = <0x31c0000 0x2a00000>;
+		};
+
+		partition@5bc0000 {
+			label = "private";
+			reg = <0x5bc0000 0x1400000>;
+			read-only;
+		};
+
+		partition@6fc0000 {
+			label = "mydlink";
+			reg = <0x6fc0000 0x600000>;
+			read-only;
+		};
+
+		partition@75c0000 {
+			label = "myconfig";
+			reg = <0x75c0000 0xa00000>;
+			read-only;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie1 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>;
+		nvmem-cell-names = "eeprom", "precal";
+		mediatek,disable-radar-background;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-handle = <&ethphy4>;
+};
+
+&ethphy4 {
+	/delete-property/ interrupts;
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "internet";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "ethernet";
+		};
+	};
+};