Initial commit

target/linux/ramips/dts/mt7621_tplink_mr600-v2-eu.dts

@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "tplink,mr600-v2-eu", "mediatek,mt7621-soc";
+	model = "TP-Link MR600 v2 (EU)";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+		label-mac-device = &gmac0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WLAN>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		wlan {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		signal1 {
+			label = "white:signal1";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		signal2 {
+			label = "white:signal2";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		signal3 {
+			label = "white:signal3";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		4g {
+			label = "white:4g";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "openwrt,uimage";
+				openwrt,offset = <512>; /* account for the 512-byte long header */
+				label = "firmware";
+				reg = <0x20000 0xfa0000>;
+			};
+
+			partition@fc0000 {
+				label = "romfile";
+				reg = <0xfc0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_romfile_f100: romfile@f100 {
+						compatible = "mac-base";
+						reg = <0xf100 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@fd0000 {
+				label = "config";
+				reg = <0xfd0000 0x10000>;
+				read-only;
+			};
+
+			partition@fe0000 {
+				label = "radio";
+				reg = <0xfe0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_radio_0: eeprom@0 {
+						reg = <0x0 0x400>;
+					};
+
+					eeprom_radio_8000: eeprom@8000 {
+						reg = <0x8000 0x4da8>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+
+&pcie0 {
+	mt76@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_radio_0>, <&macaddr_romfile_f100 0>;
+		nvmem-cell-names = "eeprom", "mac-address";
+		ieee80211-freq-limit = <2400000 2500000>;
+	};
+};
+
+&pcie1 {
+	mt76@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+		nvmem-cells = <&eeprom_radio_8000>, <&macaddr_romfile_f100 (-1)>;
+		nvmem-cell-names = "eeprom", "mac-address";
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_romfile_f100 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	status = "okay";
+	label = "wan";
+	phy-handle = <&ethphy4>;
+
+	nvmem-cells = <&macaddr_romfile_f100 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ethphy4 {
+	/delete-property/ interrupts;
+};
+
+&switch0 {
+	ports {
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+	};
+};