Initial commit

target/linux/ramips/dts/mt7621_tplink_tl-wpa8631p-v3.dts

@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "tplink,tl-wpa8631p-v3", "mediatek,mt7621-soc";
+	model = "TP-Link TL-WPA8631P v3";
+
+	aliases {
+		label-mac-device = &gmac0;
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		led {
+			label = "led";
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		pair {
+			label = "pair";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		wifi {
+			label = "wifi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi2g {
+			label = "green:wifi2g";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wifi5g {
+			label = "green:wifi5g";
+			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		led_control {
+			gpio-export,name = "tp-link:led:control";
+			gpio-export,output = <0>;
+			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "tplink,firmware";
+				label = "firmware";
+				reg = <0x20000 0x710000>;
+			};
+
+			partition@730000 {
+				label = "config";
+				reg = <0x730000 0xc0000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_config_2008: macaddr@2008 {
+						compatible = "mac-base";
+						reg = <0x2008 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@7f0000 {
+				label = "radio";
+				reg = <0x7f0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_radio_0: eeprom@0 {
+						reg = <0x0 0x400>;
+					};
+
+					eeprom_radio_8000: eeprom@8000 {
+						reg = <0x8000 0x4da8>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "rgmii2", "wdt";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_radio_0>, <&macaddr_config_2008 0>;
+		nvmem-cell-names = "eeprom", "mac-address";
+		ieee80211-freq-limit = <2400000 2500000>;
+	};
+};
+
+&pcie1 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_radio_8000>, <&macaddr_config_2008 1>;
+		nvmem-cell-names = "eeprom", "mac-address";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&ethernet {
+	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_config_2008 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "plc0";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+	};
+};