Initial commit

target/linux/ramips/dts/rt2880_airlink101_ar670w.dts

@@ -0,0 +1,126 @@
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "airlink101,ar670w", "ralink,rt2880-soc";
+	model = "Airlink101 AR670W";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	flash@bdc00000 {
+		compatible = "cfi-flash";
+		reg = <0xbc400000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x30000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@30000 {
+				reg = <0x30000 0x10000>;
+				label = "factory";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_2000: eeprom@2000 {
+						reg = <0x2000 0x200>;
+					};
+
+					macaddr_factory_2004: macaddr@2004 {
+						reg = <0x2004 0x6>;
+					};
+				};
+			};
+
+			partition@40000 {
+				compatible = "lzma";
+				reg = <0x40000 0x3c0000>;
+				label = "firmware";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wpsblue {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "spi", "uartlite";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	status = "okay";
+	nvmem-cells = <&macaddr_factory_2004>;
+	nvmem-cell-names = "mac-address";
+
+	port@0 {
+		phy-handle = <&phy0>;
+		phy-mode = "mii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			phy-mode = "mii";
+			reg = <0>;
+		};
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_2000>;
+	nvmem-cell-names = "eeprom";
+};