Files
openwrt-armor-g5/target/linux/realtek/patches-5.15/311-add-i2c-mux-rtl9300-support.patch
domenico 27c9d80f51
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
Initial commit
2025-06-24 12:51:15 +02:00

47 lines
1.8 KiB
Diff

From f4bdb7fdccdfe3fa382abe77f72a16c2f2e6add0 Mon Sep 17 00:00:00 2001
From: Birger Koblitz <git@birger-koblitz.de>
Date: Sat, 11 Dec 2021 20:25:37 +0100
Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C multiplexing
The RTL9300/RTL9310 I2C controllers have support for 2 independent I2C
masters, each with a fixed SCL pin, that cannot be changed. Each of these
masters can use 8 (RTL9300) or 16 (RTL9310) different pins for SDA.
This multiplexer directly controls the two masters and their shared
IO configuration registers to allow multiplexing between any of these
busses. The two masters cannot be used in parallel as the multiplex
is protected by a standard multiplex lock.
Submitted-by: Birger Koblitz <git@birger-koblitz.de>
---
drivers/i2c/muxes/Kconfig | 9 +++++++
drivers/i2c/muxes/Makefile | 1 +
2 files changed, 10 insertions(+)
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -99,6 +99,15 @@ config I2C_MUX_REG
This driver can also be built as a module. If so, the module
will be called i2c-mux-reg.
+config I2C_MUX_RTL9300
+ tristate "RTL9300 based I2C multiplexer"
+ help
+ If you say yes to this option, support will be included for a
+ RTL9300 based I2C multiplexer.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-reg.
+
config I2C_DEMUX_PINCTRL
tristate "pinctrl-based I2C demultiplexer"
depends on PINCTRL && OF
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o
+obj-$(CONFIG_I2C_MUX_RTL9300) += i2c-mux-rtl9300.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG