domenico/openwrt-kernel5.4-nss-qsdk10.0
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
domenico
2025-06-24 13:14:22 +02:00
commit 4002f145fc
9002 changed files with 1731834 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.patch Normal file
View File

@@ -0,0 +1,20 @@
--- /dev/null
+++ b/configs/OLIMEX_A13_SOM_defconfig
@@ -0,0 +1,17 @@
+CONFIG_SPL=y
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN5I=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_ZQ=123
+CONFIG_DRAM_EMR1=0
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_SYS_NS16550=y
+CONFIG_SUNXI_NO_PMIC=y
+CONFIG_USB_EHCI_HCD=y

375
package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch Normal file
View File

@@ -0,0 +1,375 @@
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -455,6 +455,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31-mixtile-loftq.dtb \
+ sun6i-a31-pangolin.dtb \
sun6i-a31s-colorfly-e708-q1.dtb \
sun6i-a31s-cs908.dtb \
sun6i-a31s-inet-q972.dtb \
--- a/arch/arm/dts/sun6i-a31.dtsi
+++ b/arch/arm/dts/sun6i-a31.dtsi
@@ -641,6 +641,11 @@
function = "lcd0";
};
+ i2c3_pins_a: i2c3@0 {
+ allwinner,pins = "PB5", "PB6";
+ allwinner,function = "i2c3";
+ };
+
mmc0_pins_a: mmc0@0 {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31-pangolin.dts
@@ -0,0 +1,292 @@
+/*
+ * Copyright 2015, Theobroma Systems Design und Consulting GmbH
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Theobroma Systems A31 Pangolin";
+ compatible = "tsd,a31-pangolin", "allwinner,sun6i-a31";
+
+ aliases {
+ serial0 = &uart0;
+ serial2 = &uart2;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ snps,reset-gpio = <&pio 0 7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+ status = "okay";
+
+ phy1: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_a>;
+ status = "okay";
+
+ rtc_twi: rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+ fan: fan@18 {
+ compatible = "ti,amc6821";
+ reg = <0x18>;
+ cooling-min-state = <0>;
+ cooling-max-state = <9>;
+ #cooling-cells = <2>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash: flash@0 {
+ compatible = "spansion,m25p40";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ };
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_pangolin>;
+ vmmc-supply = <&reg_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
+ status = "okay";
+};
+
+&mmc0_pins_a {
+ /* external pull-ups missing for some pins */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <&reg_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_pangolin: mmc0_cd_pin@0 {
+ allwinner,pins = "PC19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ leds_pins_pangolin: led_pins@0 {
+ allwinner,pins = "PH7", "PC16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_pins_a: mmc2@0 {
+ allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11",
+ "PC12","PC13","PC14","PC15";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&p2wi {
+ status = "okay";
+
+ axp221: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ dcdc1-supply = <&vcc_3v0>;
+ dcdc5-supply = <&vcc_dram>;
+
+ regulators {
+ x-powers,dcdc-freq = <3000>;
+
+ vcc_3v0: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+ };
+
+ vdd_cpu: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ vdd_gpu: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ vdd_sys_dll: dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys-dll";
+ };
+
+ vcc_dram: dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+ };
+
+ vcc_wifi: aldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_wifi";
+ };
+
+ avcc: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PD23";
+};
+
+&reg_usb1_vbus {
+ gpio = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD 23 */
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+};
--- /dev/null
+++ b/configs/pangolin_defconfig
@@ -0,0 +1,36 @@
+CONFIG_SUNXI_PANGOLIN=y
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII"
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-pangolin"
+CONFIG_VIDEO_VGA_VIA_LCD=y
+CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_CHANNELS=1
+CONFIG_DRAM_CLK=360
+CONFIG_DRAM_ZQ=70
+CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=0
+CONFIG_AXP_ALDO2_VOLT=1800
+CONFIG_AXP_ALDO3_VOLT=3000
+CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_AXP_ELDO1_VOLT=1200
+CONFIG_AXP_ELDO2_VOLT=2500
+CONFIG_AXP_ELDO3_VOLT=3300
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_CONS_INDEX=3
+# Vbus gpio for usb1
+CONFIG_USB1_VBUS_PIN=""
+# No Vbus gpio for usb2
+CONFIG_USB2_VBUS_PIN=""
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_DM_ETH=y
+CONFIG_CMD_IMLS=n
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SUNXI_SPI=y
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -896,6 +896,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
Set the SCL pin for the LCD i2c interface. This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+choice
+ prompt "Sunxi Board Variant"
+ optional
+
+config SUNXI_PANGOLIN
+ bool "Theobroma A31 uQ7 Board"
+
+endchoice
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig

12
package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch Normal file
View File

@@ -0,0 +1,12 @@
GNU nano 2.7.4 File: 062-A20-improve-gmac-upload.patch
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -22,6 +22,7 @@ CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
+CONFIG_GMAC_TX_DELAY=1
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y
CONFIG_AXP_ALDO3_INRUSH_QUIRK=y

44
package/boot/uboot-sunxi/patches/063-fix-lime2-revK-add-micrel-PHY.patch Normal file
View File

@@ -0,0 +1,44 @@
--- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@@ -8,6 +8,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB0_VBUS_PIN="PC17"
CONFIG_USB0_VBUS_DET="PH5"
CONFIG_I2C1_ENABLE=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_SATAPWR="PC3"
CONFIG_SPL_SPI_SUNXI=y
CONFIG_AHCI=y
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -7,6 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_USB0_VBUS_PIN="PC17"
CONFIG_USB0_VBUS_DET="PH5"
CONFIG_I2C1_ENABLE=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
--- a/drivers/net/phy/micrel_ksz90x1.c
+++ b/drivers/net/phy/micrel_ksz90x1.c
@@ -14,6 +14,8 @@
#include <errno.h>
#include <micrel.h>
#include <phy.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
/*
* KSZ9021 - KSZ9031 common
@@ -344,6 +346,10 @@ static int ksz9031_phy_extwrite(struct p
static int ksz9031_config(struct phy_device *phydev)
{
int ret;
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_DELAY(4));
ret = ksz9031_of_config(phydev);
if (ret)

32
package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch Normal file
View File

@@ -0,0 +1,32 @@
From a58eb20fb80f478038243e9e0f30f6984725e265 Mon Sep 17 00:00:00 2001
From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Date: Tue, 6 Jan 2015 15:47:18 +0100
Subject: sun6i: Sync PLL1 multipliers/dividers with Boot1
This change syncs up the multipliers and dividers used to initialize
PLL1 (i.e. the fast clock driving the ARM cores) with the values used
in Allwinner's Boot1 on sun6i.
More specifically, the following settings are now used:
* up to 768MHz: mul=2, div=2 (was: mul=1, div=1)
* up to 1152MHz: mul=3, div=2 (unchanged)
* above 1152MHz: mul=4, div=2 (was: mul=2, div=1)
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -112,11 +112,12 @@ void clock_set_pll1(unsigned int clk)
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
- int k = 1;
- int m = 1;
+ int k = 2;
+ int m = 2;
if (clk > 1152000000) {
- k = 2;
+ k = 4;
+ m = 2;
} else if (clk > 768000000) {
k = 4;
m = 2;

69
package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch Normal file
View File

@@ -0,0 +1,69 @@
From b2b385df5095fff80b4655142f58a2a6801e6c80 Mon Sep 17 00:00:00 2001
From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Date: Tue, 6 Jan 2015 21:26:44 +0100
Subject: sun6i: Fix and document PLL LDO voltage selection
The PRCM_PLL_CTRL_LDO_OUT_L and PRCM_PLL_CTRL_LDO_OUT_H macros had
their meaning reversed. This is fixed by this change-set. With this
changed, the PRCM_PLL_CTRL_LDO_OUT_L(1370) now becomes self-evident
as setting the voltage to 1.37v (which it had done all along, even
though stating a different target voltage).
After changing the PLL LDO setting, it will take a little while for
the voltage output to settle. A sdelay()-based loop waits the same
order of magnitude as Boot1.
Furthermore, a bit of documentation is added to clarify that the
required setting for the PLL LDO is 1.37v as per the A31 manual.
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -25,13 +25,26 @@ void clock_init_safe(void)
struct sunxi_prcm_reg * const prcm =
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
- /* Set PLL ldo voltage without this PLL6 does not work properly */
+ /* Set PLL ldo voltage without this PLL6 does not work properly.
+ *
+ * As the A31 manual states, that "before enable PLL, PLLVDD
+ * LDO should be set to 1.37v", we need to configure this to 2.5v
+ * in the "PLL Input Power Select" (0 << 15) and (7 << 16).
+ */
clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
PRCM_PLL_CTRL_LDO_KEY);
clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
- PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370));
clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
+
+ /* Give the PLL LDO voltage setting some time to take hold.
+ * Notes:
+ * 1) We need to use sdelay() as the timers aren't set up yet.
+ * 2) The 100k iterations come from Boot1, which spin's for 100k
+ * iterations through a loop.
+ */
+ sdelay(100000);
#endif
#if defined(CONFIG_MACH_SUN8I_R40) || defined(CONFIG_MACH_SUN50I)
--- a/arch/arm/include/asm/arch-sunxi/prcm.h
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -110,13 +110,13 @@
#define PRCM_PLL_CTRL_LDO_OUT_MASK \
__PRCM_PLL_CTRL_LDO_OUT(0x7)
/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
-#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
-#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)

16
package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch Normal file
View File

@@ -0,0 +1,16 @@
From d7311b6e7cdd1fc0e92665188e650934718cb2b1 Mon Sep 17 00:00:00 2001
From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Date: Tue, 16 Jun 2015 10:52:01 +0200
Subject: sun6i: define alternate-function for UART2 on GPG
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -190,6 +190,7 @@ enum sunxi_gpio_number {
#define SUN6I_GPG_SDC1 2
#define SUN8I_GPG_SDC1 2
#define SUN6I_GPG_TWI3 2
+#define SUN6I_GPG_UART2 2
#define SUN5I_GPG_UART1 4
#define SUN6I_GPH_PWM 2

30
package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch Normal file
View File

@@ -0,0 +1,30 @@
From c058dfb69136d62f88ae8b121104bdb7ce2df03f Mon Sep 17 00:00:00 2001
From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Date: Tue, 16 Jun 2015 10:53:11 +0200
Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -129,6 +129,10 @@ static int gpio_init(void)
sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(6), SUN6I_GPG_UART2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(7), SUN6I_GPG_UART2);
+ sunxi_gpio_set_pull(SUNXI_GPG(7), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -244,6 +244,8 @@ extern int soft_i2c_gpio_scl;
#endif
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
+#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN6I)
+#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)

23
package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch Normal file
View File

@@ -0,0 +1,23 @@
From 78d5fab8e345b1273ec8c22d06f1a1d27670b518 Mon Sep 17 00:00:00 2001
From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Date: Tue, 16 Jun 2015 10:59:38 +0200
Subject: ARM: sunxi: Make CONS_INDEX configurable
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -559,6 +559,14 @@ config SYS_BOARD
config SYS_SOC
default "sunxi"
+config CONS_INDEX
+ int "UART used for console"
+ range 1 5
+ default 1
+ ---help---
+ Defines the UART port used for serial output. It starts at 1 so UART0 is 1,
+ UART1 is 2 and so on.
+
config UART0_PORT_F
bool "UART0 on MicroSD breakout board"
default n

35
package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch Normal file
View File

@@ -0,0 +1,35 @@
From 637800493945ffed2f454756300437a4ec86e3b1 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed, 19 Jul 2017 22:23:15 +0200
Subject: mkimage: check environment for dtc binary location
Currently mkimage assumes the dtc binary is in the path and fails
otherwise. This patch makes it check the DTC environment variable first
for the dtc binary and then fall back to the default path. This makes
it possible to call the u-boot build with make DTC=... and build a fit
image with the dtc binary not being the the default path.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Simon Glass <sjg@chromium.org>
---
tools/fit_image.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
@@ -726,9 +726,14 @@ static int fit_handle_file(struct image_
}
*cmd = '\0';
} else if (params->datafile) {
+ const char* dtc = getenv("DTC");
+
+ if (!dtc)
+ dtc = MKIMAGE_DTC;
+
/* dtc -I dts -O dtb -p 500 -o tmpfile datafile */
snprintf(cmd, sizeof(cmd), "%s %s -o \"%s\" \"%s\"",
- MKIMAGE_DTC, params->dtc, tmpfile, params->datafile);
+ dtc, params->dtc, tmpfile, params->datafile);
debug("Trying to execute \"%s\"\n", cmd);
} else {
snprintf(cmd, sizeof(cmd), "cp \"%s\" \"%s\"",

37
package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch Normal file
View File

@@ -0,0 +1,37 @@
From def280c4792262a368c8861312dc6b376181021f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Mon, 1 Jan 2018 23:10:56 +0100
Subject: sunxi: deactivate binman
Use the old way to generate the images instead of binman.
binman needs python with swig to avoid this host tool dependency use the
old way of generating images.
---
Makefile | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/Makefile
+++ b/Makefile
@@ -1555,8 +1555,10 @@ endif
ifneq ($(CONFIG_ARCH_SUNXI),)
ifeq ($(CONFIG_ARM64),)
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
- $(call if_changed,binman)
+OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
+ $(call if_changed,pad_cat)
else
u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
$(call if_changed,cat)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -962,7 +962,6 @@ config ARCH_SOCFPGA
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
- select BINMAN
select CMD_GPIO
select CMD_MMC if MMC
select CMD_USB if DISTRO_DEFAULTS

19
package/boot/uboot-sunxi/patches/230-disable-axp209-on-a13-olinuxino.diff Normal file
View File

@@ -0,0 +1,19 @@
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -7,7 +7,6 @@ CONFIG_DRAM_EMR1=0
CONFIG_MMC0_CD_PIN="PG0"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_USB1_VBUS_PIN="PG11"
-CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_VGA_VIA_LCD=y
CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
@@ -21,7 +20,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
CONFIG_DFU_RAM=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_AXP_ALDO3_VOLT=3300
+CONFIG_SUNXI_NO_PMIC=y
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y

81
package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch Normal file
View File

@@ -0,0 +1,81 @@
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -539,7 +539,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-orangepi-zero-plus2.dtb \
- sun8i-h3-rervision-dvk.dtb
+ sun8i-h3-rervision-dvk.dtb \
+ sun8i-h3-zeropi.dtb
dtb-$(CONFIG_MACH_SUN8I_R40) += \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v40-bananapi-m2-berry.dtb
--- /dev/null
+++ b/arch/arm/dts/sun8i-h3-zeropi.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+ model = "FriendlyElec ZeroPi";
+ compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
+
+ aliases {
+ ethernet0 = &emac;
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_nanopi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ gmac_power_pin_nanopi: gmac_power_pin@0 {
+ pins = "PD6";
+ function = "gpio_out";
+ };
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <&reg_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+ dr_mode = "peripheral";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};

24
package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch Normal file
View File

@@ -0,0 +1,24 @@
--- /dev/null
+++ b/configs/zeropi_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MACPWR="PD6"
+# CONFIG_VIDEO_DE2 is not set
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-zeropi"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_CONSOLE_MUX=y
+CONFIG_SPL=y
+CONFIG_SYS_CLK_FREQ=480000000
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y

198
package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch Normal file
View File

@@ -0,0 +1,198 @@
From 0e8043aff1aae95d1f7b7422b91b57d9569860d3 Mon Sep 17 00:00:00 2001
From: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
Date: Mon, 12 Oct 2020 18:39:53 +0000
Subject: [PATCH] sunxi: add support for FriendlyARM NanoPi R1
Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun8i-h3-nanopi-r1.dts | 146 ++++++++++++++++++++++++++++
configs/nanopi_r1_defconfig | 22 +++++
3 files changed, 169 insertions(+)
create mode 100644 arch/arm/dts/sun8i-h3-nanopi-r1.dts
create mode 100644 configs/nanopi_r1_defconfig
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -531,6 +531,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-nanopi-m1-plus.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-nanopi-neo-air.dtb \
+ sun8i-h3-nanopi-r1.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \
sun8i-h3-orangepi-one.dtb \
--- /dev/null
+++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
+ */
+
+/* NanoPi R1 is based on the NanoPi-H3 design from FriendlyARM */
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+ model = "FriendlyARM NanoPi R1";
+ compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_cpux: gpio-regulator {
+ compatible = "regulator-gpio";
+ pinctrl-names = "default";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>;
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0x1>;
+ states = <1100000 0x0
+ 1300000 0x1>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ leds {
+ /delete-node/ pwr;
+ status {
+ label = "nanopi:red:status";
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ wan {
+ label = "nanopi:green:wan";
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "nanopi:green:lan";
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r_gpio_keys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sw_r_npi>;
+
+ /delete-node/ k1;
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <&reg_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ sdio_wifi: sdio_wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&r_pio {
+ sw_r_npi: key_pins {
+ pins = "PL3";
+ function = "gpio_in";
+ };
+};
--- /dev/null
+++ b/configs/nanopi_r1_defconfig
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MACPWR="PD6"
+# CONFIG_VIDEO_DE2 is not set
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_CONSOLE_MUX=y
+CONFIG_SYS_CLK_FREQ=480000000
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2

10
package/boot/uboot-sunxi/patches/260-add-missing-type-u64.patch Normal file
View File

@@ -0,0 +1,10 @@
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_TYPES_H
#define _LINUX_TYPES_H
+typedef unsigned long long __u64;
#include <linux/posix_types.h>
#include <asm/types.h>
#include <stdbool.h>