Initial commit

package/network/utils/iw/Makefile

@@ -0,0 +1,74 @@
+#
+# Copyright (C) 2007-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=iw
+PKG_VERSION:=5.9-8fab0c9e
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://git.kernel.org/pub/scm/linux/kernel/git/jberg/iw.git
+PKG_SOURCE_VERSION:=8fab0c9ee9db217587a58efcc37421c86edcb638
+PKG_MIRROR_HASH:=797b322bc03952f3127ae0a7da476c14ada1bbe9a9ae234a56dd6f864c568e16
+
+PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/iw
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=cfg80211 interface configuration utility
+  URL:=http://wireless.kernel.org/en/users/Documentation/iw
+  DEPENDS:= +libnl-tiny
+  VARIANT:=tiny
+endef
+
+define Package/iw-full
+  $(Package/iw)
+  TITLE += (full version)
+  VARIANT:=full
+  PROVIDES:=iw
+endef
+
+define Build/Configure
+	echo "const char iw_version[] = \"$(PKG_VERSION)\";" > $(PKG_BUILD_DIR)/version.c
+	echo "#!/bin/sh" > $(PKG_BUILD_DIR)/version.sh
+	chmod +x $(PKG_BUILD_DIR)/version.sh
+endef
+
+TARGET_CPPFLAGS:= \
+	-I$(STAGING_DIR)/usr/include/libnl-tiny \
+	$(TARGET_CPPFLAGS) \
+	-DCONFIG_LIBNL20 \
+	-D_GNU_SOURCE \
+	-flto
+
+ifeq ($(BUILD_VARIANT),full)
+  TARGET_CPPFLAGS += -DIW_FULL
+  MAKE_FLAGS += IW_FULL=1
+endif
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS) -ffunction-sections -fdata-sections" \
+	LDFLAGS="$(TARGET_LDFLAGS) -Wl,--gc-sections -flto" \
+	NL1FOUND="" NL2FOUND=Y \
+	NLLIBNAME="libnl-tiny" \
+	LIBS="-lm -lnl-tiny" \
+	V=1
+
+define Package/iw/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iw $(1)/usr/sbin/
+endef
+
+Package/iw-full/install=$(Package/iw/install)
+
+$(eval $(call BuildPackage,iw))
+$(eval $(call BuildPackage,iw-full))

package/network/utils/iw/patches/001-nl80211_h_sync.patch

@@ -0,0 +1,302 @@
+--- a/nl80211.h
++++ b/nl80211.h
+@@ -655,6 +655,9 @@
+  *	When a security association was established on an 802.1X network using
+  *	fast transition, this event should be followed by an
+  *	%NL80211_CMD_PORT_AUTHORIZED event.
++ *	Following a %NL80211_CMD_ROAM event userspace can issue
++ *	%NL80211_CMD_GET_SCAN in order to obtain the scan information for the
++ *	new BSS the card/driver roamed to.
+  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+  *	userspace that a connection was dropped by the AP or due to other
+  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -757,7 +760,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
+- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
++ *	(no longer supported).
+  *
+  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+  *	multicast to unicast conversion. When enabled, all multicast packets
+@@ -1177,6 +1181,10 @@
+  *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+  *	if the recipient acknowledged the frame.
+  *
++ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
++ *	passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
++ *	specify the wiphy index to be applied to.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -1407,6 +1415,8 @@ enum nl80211_commands {
+ 
+ 	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ 
++	NL80211_CMD_SET_SAR_SPECS,
++
+ 	/* add new commands above here */
+ 
+ 	/* used to define NL80211_CMD_MAX below */
+@@ -1750,8 +1760,9 @@ enum nl80211_commands {
+  *	specify just a single bitrate, which is to be used for the beacon.
+  *	The driver must also specify support for this with the extended
+  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
++ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
+  *
+  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+@@ -1955,8 +1966,15 @@ enum nl80211_commands {
+  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+  *	to be filled by the FW.
+- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+- *      this feature.  Currently, only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
+  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+  *      ATTR_HT_CAPABILITY to which attention should be paid.
+  *      Currently, only mac80211 NICs support this feature.
+@@ -2077,7 +2095,8 @@ enum nl80211_commands {
+  *	until the channel switch event.
+  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+  *	must be blocked on the current channel (before the channel switch
+- *	operation).
++ *	operation). Also included in the channel switch started event if quiet
++ *	was requested by the AP.
+  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+  *	for the time while performing a channel switch.
+  * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+@@ -2527,6 +2546,23 @@ enum nl80211_commands {
+  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+  *
++ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
++ *	derivation in WPA3-Personal networks which are using SAE authentication.
++ *	This is a u8 attribute that encapsulates one of the values from
++ *	&enum nl80211_sae_pwe_mechanism.
++ *
++ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
++ *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
++ *	of %nl80211_sar_attrs which specifies the sar type and related
++ *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
++ *
++ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
++ *	disassoc events to indicate that an immediate reconnect to the AP
++ *	is desired.
++ *
++ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
++ *	transmit power to stay within regulatory limits. u32, dBi.
++ *
+  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+  * @NL80211_ATTR_MAX: highest attribute number currently defined
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+@@ -3016,6 +3052,16 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_S1G_CAPABILITY,
+ 	NL80211_ATTR_S1G_CAPABILITY_MASK,
+ 
++	NL80211_ATTR_SAE_PWE,
++
++	NL80211_ATTR_RECONNECT_REQUESTED,
++
++	NL80211_ATTR_SAR_SPEC,
++
++	NL80211_ATTR_DISABLE_HE,
++
++	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
++
+ 	/* add attributes here, update the policy in nl80211.c */
+ 
+ 	__NL80211_ATTR_AFTER_LAST,
+@@ -5896,6 +5942,19 @@ enum nl80211_feature_flags {
+  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+  *	unsolicited broadcast probe response transmission
+  *
++ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
++ *	configuration (AP/mesh) with HE rates.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
++ *      frame protection for all management frames exchanged during the
++ *      negotiation and range measurement procedure.
++ *
+  * @NUM_NL80211_EXT_FEATURES: number of extended features.
+  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+  */
+@@ -5956,6 +6015,10 @@ enum nl80211_ext_feature_index {
+ 	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ 	NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ 	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
++	NL80211_EXT_FEATURE_BEACON_RATE_HE,
++	NL80211_EXT_FEATURE_SECURE_LTF,
++	NL80211_EXT_FEATURE_SECURE_RTT,
++	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ 
+ 	/* add new features before the definition below */
+ 	NUM_NL80211_EXT_FEATURES,
+@@ -6253,11 +6316,13 @@ struct nl80211_vendor_cmd_info {
+  * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+  * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+  * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
+  */
+ enum nl80211_tdls_peer_capability {
+ 	NL80211_TDLS_PEER_HT = 1<<0,
+ 	NL80211_TDLS_PEER_VHT = 1<<1,
+ 	NL80211_TDLS_PEER_WMM = 1<<2,
++	NL80211_TDLS_PEER_HE = 1<<3,
+ };
+ 
+ /**
+@@ -6849,6 +6914,9 @@ enum nl80211_peer_measurement_ftm_capa {
+  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+  *	ranging will be used.
++ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
++ *	valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
++ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+  *
+  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+@@ -6867,6 +6935,7 @@ enum nl80211_peer_measurement_ftm_req {
+ 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+ 	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+ 	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
++	NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
+@@ -7124,4 +7193,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
+ 	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ 		__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+ };
++
++/**
++ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
++ *	derivation. Applicable only when WPA3-Personal SAE authentication is
++ *	used.
++ *
++ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
++ *	attribute is not present from userspace.
++ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
++ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
++ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
++ *	can be used.
++ */
++enum nl80211_sae_pwe_mechanism {
++	NL80211_SAE_PWE_UNSPECIFIED,
++	NL80211_SAE_PWE_HUNT_AND_PECK,
++	NL80211_SAE_PWE_HASH_TO_ELEMENT,
++	NL80211_SAE_PWE_BOTH,
++};
++
++/**
++ * enum nl80211_sar_type - type of SAR specs
++ *
++ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
++ *
++ */
++enum nl80211_sar_type {
++	NL80211_SAR_TYPE_POWER,
++
++	/* add new type here */
++
++	/* Keep last */
++	NUM_NL80211_SAR_TYPE,
++};
++
++/**
++ * enum nl80211_sar_attrs - Attributes for SAR spec
++ *
++ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
++ *
++ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
++ *	limit specifications. Each specification contains a set
++ *	of %nl80211_sar_specs_attrs.
++ *
++ *	For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
++ *	and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
++ *
++ *	For sar_capa dump, it contains array of
++ *	%NL80211_SAR_ATTR_SPECS_START_FREQ
++ *	and %NL80211_SAR_ATTR_SPECS_END_FREQ.
++ *
++ * @__NL80211_SAR_ATTR_LAST: Internal
++ * @NL80211_SAR_ATTR_MAX: highest sar attribute
++ *
++ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
++ */
++enum nl80211_sar_attrs {
++	__NL80211_SAR_ATTR_INVALID,
++
++	NL80211_SAR_ATTR_TYPE,
++	NL80211_SAR_ATTR_SPECS,
++
++	__NL80211_SAR_ATTR_LAST,
++	NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
++};
++
++/**
++ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
++ *
++ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
++ *	power limit value in units of 0.25 dBm if type is
++ *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
++ *	0 means userspace doesn't have SAR limitation on this associated range.
++ *
++ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
++ *	index of exported freq range table and the associated power limitation
++ *	is applied to this range.
++ *
++ *	Userspace isn't required to set all the ranges advertised by WLAN driver,
++ *	and userspace can skip some certain ranges. These skipped ranges don't
++ *	have SAR limitations, and they are same as setting the
++ *	%NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
++ *	value higher than regulatory allowed value just means SAR power
++ *	limitation is removed, but it's required to set at least one range.
++ *	It's not allowed to set duplicated range in one SET operation.
++ *
++ *	Every SET operation overwrites previous SET operation.
++ *
++ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
++ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
++ */
++enum nl80211_sar_specs_attrs {
++	__NL80211_SAR_ATTR_SPECS_INVALID,
++
++	NL80211_SAR_ATTR_SPECS_POWER,
++	NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
++	NL80211_SAR_ATTR_SPECS_START_FREQ,
++	NL80211_SAR_ATTR_SPECS_END_FREQ,
++
++	__NL80211_SAR_ATTR_SPECS_LAST,
++	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
++};
++
+ #endif /* __LINUX_NL80211_H */

package/network/utils/iw/patches/120-antenna_gain.patch

@@ -0,0 +1,33 @@
+--- a/phy.c
++++ b/phy.c
+@@ -855,3 +855,30 @@ static int handle_get_txq(struct nl80211
+ COMMAND(get, txq, "",
+ 	NL80211_CMD_GET_WIPHY, 0, CIB_PHY, handle_get_txq,
+ 	"Get TXQ parameters.");
++
++static int handle_antenna_gain(struct nl80211_state *state,
++			       struct nl_msg *msg,
++			       int argc, char **argv,
++			       enum id_input id)
++{
++	char *endptr;
++	int dbm;
++
++	/* get the required args */
++	if (argc != 1)
++		return 1;
++
++	dbm = strtol(argv[0], &endptr, 10);
++	if (*endptr)
++		return 2;
++
++	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_GAIN, dbm);
++
++	return 0;
++
++ nla_put_failure:
++	return -ENOBUFS;
++}
++COMMAND(set, antenna_gain, "<antenna gain in dBm>",
++	NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna_gain,
++	"Specify antenna gain.");

package/network/utils/iw/patches/130-survey-bss-rx-time.patch

@@ -0,0 +1,12 @@
+--- a/survey.c
++++ b/survey.c
+@@ -60,6 +60,9 @@ static int print_survey_handler(struct n
+ 	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])
+ 		printf("\tchannel receive time:\t\t%llu ms\n",
+ 			(unsigned long long)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]));
++	if (sinfo[NL80211_SURVEY_INFO_TIME_BSS_RX])
++		printf("\tchannel BSS receive time:\t%llu ms\n",
++			(unsigned long long)nla_get_u64(sinfo[NL80211_SURVEY_INFO_TIME_BSS_RX]));
+ 	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])
+ 		printf("\tchannel transmit time:\t\t%llu ms\n",
+ 			(unsigned long long)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]));

package/network/utils/iw/patches/200-reduce_size.patch

@@ -0,0 +1,368 @@
+--- a/event.c
++++ b/event.c
+@@ -956,6 +956,7 @@ static int print_event(struct nl_msg *ms
+ 	}
+ 
+ 	switch (gnlh->cmd) {
++#ifdef IW_FULL
+ 	case NL80211_CMD_NEW_WIPHY:
+ 		printf("renamed to %s\n", nla_get_string(tb[NL80211_ATTR_WIPHY_NAME]));
+ 		break;
+@@ -991,6 +992,7 @@ static int print_event(struct nl_msg *ms
+ 	case NL80211_CMD_SCHED_SCAN_RESULTS:
+ 		printf("got scheduled scan results\n");
+ 		break;
++#endif
+ 	case NL80211_CMD_WIPHY_REG_CHANGE:
+ 	case NL80211_CMD_REG_CHANGE:
+ 		if (gnlh->cmd == NL80211_CMD_WIPHY_REG_CHANGE)
+@@ -1073,6 +1075,7 @@ static int print_event(struct nl_msg *ms
+ 		mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
+ 		printf("del station %s\n", macbuf);
+ 		break;
++#ifdef IW_FULL
+ 	case NL80211_CMD_JOIN_IBSS:
+ 		mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
+ 		printf("IBSS %s joined\n", macbuf);
+@@ -1271,9 +1274,9 @@ static int print_event(struct nl_msg *ms
+ 	case NL80211_CMD_CH_SWITCH_NOTIFY:
+ 		parse_ch_switch_notify(tb, gnlh->cmd);
+ 		break;
++#endif
+ 	default:
+-		printf("unknown event %d (%s)\n",
+-		       gnlh->cmd, command_name(gnlh->cmd));
++		printf("unknown event %d\n", gnlh->cmd);
+ 		break;
+ 	}
+ 
+--- a/info.c
++++ b/info.c
+@@ -216,6 +216,7 @@ next:
+ 				}
+ 			}
+ 
++#ifdef IW_FULL
+ 			if (tb_band[NL80211_BAND_ATTR_RATES]) {
+ 			printf("\t\tBitrates (non-HT):\n");
+ 			nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) {
+@@ -232,6 +233,7 @@ next:
+ 				printf("\n");
+ 			}
+ 			}
++#endif
+ 		}
+ 	}
+ 
+@@ -297,6 +299,7 @@ next:
+ 		printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
+ 	}
+ 
++#ifdef IW_FULL
+ 	if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) {
+ 		int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32);
+ 		int i;
+@@ -308,6 +311,7 @@ next:
+ 					cipher_name(ciphers[i]));
+ 		}
+ 	}
++#endif
+ 
+ 	if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] &&
+ 	    tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX])
+@@ -327,11 +331,13 @@ next:
+ 			printf("\t\t * %s\n", iftype_name(nla_type(nl_mode)));
+ 	}
+ 
++#ifdef IW_FULL
+ 	if (tb_msg[NL80211_ATTR_SOFTWARE_IFTYPES]) {
+ 		printf("\tsoftware interface modes (can always be added):\n");
+ 		nla_for_each_nested(nl_mode, tb_msg[NL80211_ATTR_SOFTWARE_IFTYPES], rem_mode)
+ 			printf("\t\t * %s\n", iftype_name(nla_type(nl_mode)));
+ 	}
++#endif
+ 
+ 	if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) {
+ 		struct nlattr *nl_combi;
+@@ -428,6 +434,7 @@ broken_combination:
+ 			printf("\tinterface combinations are not supported\n");
+ 	}
+ 
++#ifdef IW_FULL
+ 	if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) {
+ 		printf("\tSupported commands:\n");
+ 		nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd)
+@@ -525,6 +532,7 @@ broken_combination:
+ 				printf("\t\t * wake up on TCP connection\n");
+ 		}
+ 	}
++#endif
+ 
+ 	if (tb_msg[NL80211_ATTR_ROAM_SUPPORT])
+ 		printf("\tDevice supports roaming.\n");
+@@ -563,6 +571,7 @@ broken_combination:
+ 		}
+ 	}
+ 
++#ifdef IW_FULL
+ 	if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
+ 		unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
+ 
+@@ -627,6 +636,7 @@ broken_combination:
+ 		if (features & NL80211_FEATURE_ND_RANDOM_MAC_ADDR)
+ 			printf("\tDevice supports randomizing MAC-addr in net-detect scans.\n");
+ 	}
++#endif
+ 
+ 	if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
+ 		printf("\tDevice supports T-DLS.\n");
+@@ -762,6 +772,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
+ 	 "List all wireless devices and their capabilities.");
+ TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
+ 
++#ifdef IW_FULL
+ static int handle_commands(struct nl80211_state *state, struct nl_msg *msg,
+ 			   int argc, char **argv, enum id_input id)
+ {
+@@ -773,6 +784,7 @@ static int handle_commands(struct nl8021
+ }
+ TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
+ 	 "list all known commands and their decimal & hex value");
++#endif
+ 
+ static int print_feature_handler(struct nl_msg *msg, void *arg)
+ {
+--- a/scan.c
++++ b/scan.c
+@@ -1306,6 +1306,9 @@ static void print_ht_op(const uint8_t ty
+ 	printf("\t\t * secondary channel offset: %s\n",
+ 		ht_secondary_offset[data[1] & 0x3]);
+ 	printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]);
++#ifndef IW_FULL
++	return;
++#endif
+ 	printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3);
+ 	printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]);
+ 	printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2);
+@@ -1716,6 +1719,14 @@ static void print_ie(const struct ie_pri
+ 
+ static const struct ie_print ieprinters[] = {
+ 	[0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
++	[45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), },
++	[48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), },
++	[61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), },
++	[62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), },
++	[114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
++	[191] = { "VHT capabilities", print_vht_capa, 12, 255, BIT(PRINT_SCAN), },
++	[192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), },
++#ifdef IW_FULL
+ 	[1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
+ 	[3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), },
+ 	[5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), },
+@@ -1725,26 +1736,20 @@ static const struct ie_print ieprinters[
+ 	[32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), },
+ 	[35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), },
+ 	[42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), },
+-	[45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), },
+ 	[47] = { "ERP D4.0", print_erp, 1, 255, BIT(PRINT_SCAN), },
+ 	[51] = { "AP Channel Report", print_ap_channel_report, 1, 255, BIT(PRINT_SCAN), },
+ 	[59] = { "Supported operating classes", print_supp_op_classes, 1, 255, BIT(PRINT_SCAN), },
+ 	[66] = { "Measurement Pilot Transmission", print_measurement_pilot_tx, 1, 255, BIT(PRINT_SCAN), },
+ 	[74] = { "Overlapping BSS scan params", print_obss_scan_params, 14, 255, BIT(PRINT_SCAN), },
+-	[61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), },
+-	[62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), },
+-	[191] = { "VHT capabilities", print_vht_capa, 12, 255, BIT(PRINT_SCAN), },
+-	[192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), },
+-	[48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), },
+ 	[50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
+ 	[70] = { "RM enabled capabilities", print_rm_enabled_capabilities, 5, 5, BIT(PRINT_SCAN), },
+ 	[113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), },
+-	[114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
+ 	[127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), },
+ 	[107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), },
+ 	[108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), },
+ 	[111] = { "802.11u Roaming Consortium", print_11u_rcon, 2, 255, BIT(PRINT_SCAN), },
+ 	[195] = { "Transmit Power Envelope", print_tx_power_envelope, 2, 5, BIT(PRINT_SCAN), },
++#endif
+ };
+ 
+ static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data,
+@@ -2080,8 +2085,10 @@ static void print_wifi_wps(const uint8_t
+ 
+ static const struct ie_print wifiprinters[] = {
+ 	[1] = { "WPA", print_wifi_wpa, 2, 255, BIT(PRINT_SCAN), },
++#ifdef IW_FULL
+ 	[2] = { "WMM", print_wifi_wmm, 1, 255, BIT(PRINT_SCAN), },
+ 	[4] = { "WPS", print_wifi_wps, 0, 255, BIT(PRINT_SCAN), },
++#endif
+ };
+ 
+ static inline void print_p2p(const uint8_t type, uint8_t len,
+@@ -2244,6 +2251,10 @@ static void print_vendor(unsigned char l
+ 		return;
+ 	}
+ 
++#ifdef IW_FULL
++	return;
++#endif
++
+ 	if (len >= 4 && memcmp(data, wfa_oui, 3) == 0) {
+ 		if (data[3] < ARRAY_SIZE(wfa_printers) &&
+ 		    wfa_printers[data[3]].name &&
+@@ -2377,6 +2388,7 @@ static void print_capa_non_dmg(__u16 cap
+ 		printf(" ESS");
+ 	if (capa & WLAN_CAPABILITY_IBSS)
+ 		printf(" IBSS");
++#ifdef IW_FULL
+ 	if (capa & WLAN_CAPABILITY_CF_POLLABLE)
+ 		printf(" CfPollable");
+ 	if (capa & WLAN_CAPABILITY_CF_POLL_REQUEST)
+@@ -2405,6 +2417,7 @@ static void print_capa_non_dmg(__u16 cap
+ 		printf(" DelayedBACK");
+ 	if (capa & WLAN_CAPABILITY_IMM_BACK)
+ 		printf(" ImmediateBACK");
++#endif
+ }
+ 
+ static int print_bss_handler(struct nl_msg *msg, void *arg)
+@@ -2489,8 +2502,10 @@ static int print_bss_handler(struct nl_m
+ 	if (bss[NL80211_BSS_FREQUENCY]) {
+ 		int freq = nla_get_u32(bss[NL80211_BSS_FREQUENCY]);
+ 		printf("\tfreq: %d\n", freq);
++#ifdef IW_FULL
+ 		if (freq > 45000)
+ 			is_dmg = true;
++#endif
+ 	}
+ 	if (bss[NL80211_BSS_BEACON_INTERVAL])
+ 		printf("\tbeacon interval: %d TUs\n",
+@@ -2684,6 +2699,7 @@ static int handle_stop_sched_scan(struct
+ 	return 0;
+ }
+ 
++#ifdef IW_FULL
+ COMMAND(scan, sched_start,
+ 	SCHED_SCAN_OPTIONS,
+ 	NL80211_CMD_START_SCHED_SCAN, 0, CIB_NETDEV, handle_start_sched_scan,
+@@ -2694,3 +2710,4 @@ COMMAND(scan, sched_start,
+ COMMAND(scan, sched_stop, "",
+ 	NL80211_CMD_STOP_SCHED_SCAN, 0, CIB_NETDEV, handle_stop_sched_scan,
+ 	"Stop an ongoing scheduled scan.");
++#endif
+--- a/util.c
++++ b/util.c
+@@ -153,6 +153,7 @@ static const char *commands[NL80211_CMD_
+ 
+ static char cmdbuf[100];
+ 
++#ifdef IW_FULL
+ const char *command_name(enum nl80211_commands cmd)
+ {
+ 	if (cmd <= NL80211_CMD_MAX && commands[cmd])
+@@ -160,6 +161,7 @@ const char *command_name(enum nl80211_co
+ 	sprintf(cmdbuf, "Unknown command (%d)", cmd);
+ 	return cmdbuf;
+ }
++#endif
+ 
+ int ieee80211_channel_to_frequency(int chan, enum nl80211_band band)
+ {
+@@ -311,6 +313,9 @@ int parse_keys(struct nl_msg *msg, char
+ 	char keybuf[13];
+ 	int pos = 0;
+ 
++#ifndef IW_FULL
++	return 1;
++#endif
+ 	if (!*argc)
+ 		return 1;
+ 
+--- a/Makefile
++++ b/Makefile
+@@ -23,6 +23,12 @@ _OBJS := $(sort $(patsubst %.c,%.o,$(wil
+ VERSION_OBJS := $(filter-out version.o, $(_OBJS))
+ OBJS := $(VERSION_OBJS) version.o
+ 
++OBJS_FULL = ocb offch cqm wowlan coalesce roc p2p vendor mgmt ap sha256 nan bloom measurements ftm
++ifdef IW_FULL
++  CFLAGS += -DIW_FULL
++else
++  OBJS:=$(filter-out $(patsubst %,%.o,$(OBJS_FULL)),$(OBJS))
++endif
+ ALL = iw
+ 
+ ifeq ($(NO_PKG_CONFIG),)
+--- a/station.c
++++ b/station.c
+@@ -777,10 +777,12 @@ static int handle_station_set_plink(stru
+  nla_put_failure:
+ 	return -ENOBUFS;
+ }
++#ifdef IW_FULL
+ COMMAND_ALIAS(station, set, "<MAC address> plink_action <open|block>",
+ 	NL80211_CMD_SET_STATION, 0, CIB_NETDEV, handle_station_set_plink,
+ 	"Set mesh peer link action for this station (peer).",
+ 	select_station_cmd, station_set_plink);
++#endif
+ 
+ static int handle_station_set_vlan(struct nl80211_state *state,
+ 				   struct nl_msg *msg,
+@@ -875,11 +877,13 @@ static int handle_station_set_mesh_power
+ nla_put_failure:
+ 	return -ENOBUFS;
+ }
++#ifdef IW_FULL
+ COMMAND_ALIAS(station, set, "<MAC address> mesh_power_mode "
+ 	"<active|light|deep>", NL80211_CMD_SET_STATION, 0, CIB_NETDEV,
+ 	handle_station_set_mesh_power_mode,
+ 	"Set link-specific mesh power mode for this station",
+ 	select_station_cmd, station_set_mesh_power_mode);
++#endif
+ 
+ static int handle_station_set_airtime_weight(struct nl80211_state *state,
+ 					     struct nl_msg *msg,
+--- a/interface.c
++++ b/interface.c
+@@ -627,9 +627,11 @@ static int handle_interface_wds_peer(str
+  nla_put_failure:
+ 	return -ENOBUFS;
+ }
++#ifdef IW_FULL
+ COMMAND(set, peer, "<MAC address>",
+ 	NL80211_CMD_SET_WDS_PEER, 0, CIB_NETDEV, handle_interface_wds_peer,
+ 	"Set interface WDS peer.");
++#endif
+ 
+ static int set_mcast_rate(struct nl80211_state *state,
+ 			  struct nl_msg *msg,
+@@ -719,6 +721,7 @@ static int handle_chan(struct nl80211_st
+ 	return handle_chanfreq(state, msg, true, argc, argv, id);
+ }
+ 
++#ifdef IW_FULL
+ SECTION(switch);
+ COMMAND(switch, freq,
+ 	"<freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons <count>] [block-tx]\n"
+@@ -990,3 +993,4 @@ COMMAND(set, tidconf, "[peer <MAC addres
+ 	"  $ iw dev wlan0 set tidconf peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto\n"
+ 	"  $ iw dev wlan0 set tidconf peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit vht-mcs-5 4:9\n"
+ 	);
++#endif
+--- a/phy.c
++++ b/phy.c
+@@ -369,6 +369,7 @@ err_out:
+ 		free(cac_trigger_argv);
+ 	return err;
+ }
++#ifdef IW_FULL
+ TOPLEVEL(cac, "channel <channel> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]\n"
+ 	      "freq <freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]\n"
+ 	      "freq <control freq> [5|10|20|40|80|80+80|160] [<center1_freq> [<center2_freq>]]",
+@@ -380,6 +381,7 @@ COMMAND(cac, trigger,
+ 	NL80211_CMD_RADAR_DETECT, 0, CIB_NETDEV, handle_cac_trigger,
+ 	"Start or trigger a channel availability check (CAC) looking to look for\n"
+ 	"radars on the given channel.");
++#endif
+ 
+ static int handle_fragmentation(struct nl80211_state *state,
+ 				struct nl_msg *msg,