Initial commit

target/linux/archs38/Makefile

@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2016 OpenWrt.org
+
+include $(TOPDIR)/rules.mk
+
+ARCH:=arc
+CPU_TYPE:=archs
+BOARD:=archs38
+BOARDNAME:=Synopsys DesignWare ARC HS38
+SUBTARGETS:=generic
+
+KERNEL_PATCHVER:=5.4
+
+DEVICE_TYPE:=basic
+
+define Target/Description
+	Synopsys DesignWare boards
+endef
+
+include $(INCLUDE_DIR)/target.mk
+
+$(eval $(call BuildTarget))

target/linux/archs38/base-files/etc/board.d/02_network

@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2016 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+snps,axs103|\
+snps,hsdk)
+	ucidef_set_interface_lan "eth0" "dhcp"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/archs38/config-5.4

@@ -0,0 +1,277 @@
+# CONFIG_16KSTACKS is not set
+CONFIG_ARC=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y
+CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
+CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
+CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
+CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARC_BUILTIN_DTB_NAME=""
+CONFIG_ARC_CACHE=y
+CONFIG_ARC_CACHE_LINE_SHIFT=6
+CONFIG_ARC_CACHE_PAGES=y
+CONFIG_ARC_CPU_HS=y
+CONFIG_ARC_CURR_IN_REG=y
+CONFIG_ARC_DBG=y
+# CONFIG_ARC_DBG_TLB_PARANOIA is not set
+CONFIG_ARC_DW2_UNWIND=y
+CONFIG_ARC_HAS_ACCL_REGS=y
+CONFIG_ARC_HAS_DCACHE=y
+# CONFIG_ARC_HAS_DCCM is not set
+CONFIG_ARC_HAS_DIV_REM=y
+CONFIG_ARC_HAS_ICACHE=y
+# CONFIG_ARC_HAS_ICCM is not set
+CONFIG_ARC_HAS_LL64=y
+CONFIG_ARC_HAS_LLSC=y
+# CONFIG_ARC_HAS_PAE40 is not set
+CONFIG_ARC_HAS_SWAPE=y
+CONFIG_ARC_IRQ_NO_AUTOSAVE=y
+CONFIG_ARC_KVADDR_SIZE=256
+CONFIG_ARC_MCIP=y
+# CONFIG_ARC_METAWARE_HLINK is not set
+CONFIG_ARC_MMU_V4=y
+# CONFIG_ARC_PAGE_SIZE_16K is not set
+# CONFIG_ARC_PAGE_SIZE_4K is not set
+CONFIG_ARC_PAGE_SIZE_8K=y
+CONFIG_ARC_PLAT_AXS10X=y
+# CONFIG_ARC_PLAT_EZNPS is not set
+# CONFIG_ARC_PLAT_TB10X is not set
+# CONFIG_ARC_SMP_HALT_ON_RESET is not set
+CONFIG_ARC_SOC_HSDK=y
+CONFIG_ARC_TIMERS=y
+CONFIG_ARC_TIMERS_64BIT=y
+CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS=y
+CONFIG_AXS103=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLK_HSDK=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_DEVTMPFS=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_REMAP=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DTC=y
+CONFIG_DWMAC_ANARION=y
+CONFIG_DWMAC_GENERIC=y
+CONFIG_DW_APB_ICTL=y
+CONFIG_DW_AXI_DMAC=y
+CONFIG_EXT4_FS=y
+# CONFIG_EZNPS_GIC is not set
+CONFIG_FAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_CMDLINE=y
+CONFIG_FIXED_PHY=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_SNPS_CREG=y
+CONFIG_GRACE_PERIOD=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FUTEX_CMPXCHG=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PCI=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_KFIFO_BUF=y
+CONFIG_IIO_ST_PRESS=y
+CONFIG_IIO_ST_PRESS_I2C=y
+CONFIG_IIO_ST_PRESS_SPI=y
+CONFIG_IIO_ST_SENSORS_CORE=y
+CONFIG_IIO_ST_SENSORS_I2C=y
+CONFIG_IIO_ST_SENSORS_SPI=y
+CONFIG_IIO_TRIGGER=y
+CONFIG_IIO_TRIGGERED_BUFFER=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISA_ARCOMPACT is not set
+CONFIG_ISA_ARCV2=y
+CONFIG_JBD2=y
+CONFIG_KALLSYMS=y
+CONFIG_KERNEL_GZIP=y
+CONFIG_LIBFDT=y
+CONFIG_LINUX_LINK_BASE=0x90000000
+CONFIG_LINUX_RAM_BASE=0x80000000
+CONFIG_LOCKD=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MICREL_PHY=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_DW=y
+# CONFIG_MMC_DW_BLUEFIELD is not set
+# CONFIG_MMC_DW_EXYNOS is not set
+# CONFIG_MMC_DW_HI3798CV200 is not set
+# CONFIG_MMC_DW_K3 is not set
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_TREE_LOOKUP=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NAMESPACES=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_NS=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NO_IOPORT_MAP=y
+CONFIG_NR_CPUS=4
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PADATA=y
+CONFIG_PAGE_POOL=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+CONFIG_PPS=y
+CONFIG_PREEMPT=y
+CONFIG_PREEMPTION=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_RCU=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_RESET_AXS10X=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_HSDK=y
+CONFIG_RESET_SIMPLE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_DWLIB=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+CONFIG_SERIAL_ARC_NR_PORTS=1
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_SPI=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SRCU=y
+CONFIG_STACKTRACE=y
+# CONFIG_STANDALONE is not set
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_STMMAC_SELFTESTS is not set
+CONFIG_SUNRPC=y
+CONFIG_SWPHY=y
+CONFIG_TASKS_RCU=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TI_ADC108S102=y
+CONFIG_TREE_SRCU=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USER_NS is not set
+CONFIG_VFAT_FS=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y

target/linux/archs38/generic/profiles/00-default.mk

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2016 OpenWrt.org
+
+define Profile/Default
+	NAME:=Default Profile (all drivers)
+	PACKAGES:= kmod-usb2 kmod-ath9k-htc wpad-basic-wolfssl
+endef
+
+define Profile/Default/Description
+	Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))

target/linux/archs38/generic/target.mk

@@ -0,0 +1,8 @@
+BOARDNAME:=Generic
+FEATURES += ext4 usb ramdisk
+
+define Target/Description
+	Build firmware images for ARC HS38 based boards.
+endef
+
+

target/linux/archs38/image/Config.in

@@ -0,0 +1,5 @@
+config AXS10X_SD_BOOT_PARTSIZE
+	int "Boot (SD Card) filesystem partition size (in MB)"
+	depends on TARGET_archs38
+	default 20
+

target/linux/archs38/image/Makefile

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2016 OpenWrt.org
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+# On ARC initramfs is put before entry point and so entry point moves
+# in memory from build to built. Thus we need to extract EP from vmlinux
+# every time before generation of uImage.
+kernel_ep = `$(KERNEL_CROSS)readelf -h $(1) | grep "Entry point address" | grep -o 0x.*`
+
+define Build/patch-dtb
+	$(STAGING_DIR_HOST)/bin/patch-dtb $@ $(DTS_DIR)/$(DEVICE_DTS).dtb
+endef
+
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+# Root FS built-in
+define Device/vmlinux
+	KERNEL_SUFFIX := .elf
+	KERNEL := kernel-bin | patch-dtb
+	KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
+endef
+
+define Device/nsim_hs
+	$(call Device/vmlinux)
+	DEVICE_VENDOR := Synopsys
+	DEVICE_MODEL := nSIM HS
+	DEVICE_PROFILE := nsim_hs
+	DEVICE_DTS := nsim_hs_idu
+endef
+TARGET_DEVICES += nsim_hs
+endif
+
+# Root FS on SD-card
+KERNEL_LOADADDR := 0x90000000
+DEVICE_DTS_LIST:= axs103_idu nsim_hs_idu hsdk
+FAT32_BLOCK_SIZE=1024
+FAT32_BLOCKS=$(shell echo $$(($(CONFIG_AXS10X_SD_BOOT_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
+
+define Image/Prepare
+	# Build .dtb for all boards we may run on
+	$(foreach dts,$(DEVICE_DTS_LIST),
+		$(call Image/BuildDTB,$(DTS_DIR)/$(dts).dts,$(DTS_DIR)/$(dts).dtb)
+	)
+endef
+
+define Image/Build/SDCard
+	rm -f $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img
+	mkfs.fat $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img -C $(FAT32_BLOCKS)
+	mkimage -C none -A arc -T script -d uEnv.txt $(BIN_DIR)/uEnv.scr
+	mkenvimage -s 0x4000 -o $(BIN_DIR)/uboot.env ./uboot.env.txt
+	mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(BIN_DIR)/uEnv.scr ::boot.scr
+	mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(DTS_DIR)/*.dtb ::
+	mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(BIN_DIR)/$(IMG_PREFIX)-uImage ::uImage
+	mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(BIN_DIR)/uboot.env ::uboot.env
+
+	./gen_axs10x_sdcard_img.sh \
+		$(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-sdcard-vfat-$(1).img \
+		$(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img \
+		$(KDIR)/root.$(1) \
+		$(CONFIG_AXS10X_SD_BOOT_PARTSIZE) \
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE)
+
+ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
+	gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-sdcard-vfat-$(1).img
+endif
+endef
+
+define Image/BuildKernel
+	# Build unified uImage
+	$(call Image/BuildKernel/MkuImage, \
+		none, $(KERNEL_LOADADDR),$(call kernel_ep,$(KDIR)/vmlinux.elf) , \
+		$(KDIR)/vmlinux, \
+		$(BIN_DIR)/$(IMG_PREFIX)-uImage \
+	)
+endef
+
+define Image/Build
+	$(call Image/Build/$(1),$(1))
+	$(call Image/Build/SDCard,$(1))
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+	$(call Image/Gzip,$(BIN_DIR)/$(IMG_PREFIX)-root.$(1))
+endef
+
+$(eval $(call BuildImage))

target/linux/archs38/image/gen_axs10x_sdcard_img.sh

@@ -0,0 +1,29 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2016 OpenWrt.org
+
+set -x
+[ $# -eq 5 ] || {
+    echo "SYNTAX: $0 <file> <bootfs image> <rootfs image> <bootfs size> <rootfs size>"
+    exit 1
+}
+
+OUTPUT="$1"
+BOOTFS="$2"
+ROOTFS="$3"
+BOOTFSSIZE="$4"
+ROOTFSSIZE="$5"
+
+head=4
+sect=63
+
+set $(ptgen -o $OUTPUT -h $head -s $sect -l 1024 -t c -p ${BOOTFSSIZE}M -t 83 -p ${ROOTFSSIZE}M)
+
+BOOTOFFSET="$(($1 / 512))"
+BOOTSIZE="$(($2 / 512))"
+ROOTFSOFFSET="$(($3 / 512))"
+ROOTFSSIZE="$(($4 / 512))"
+
+dd bs=512 if="$BOOTFS" of="$OUTPUT" seek="$BOOTOFFSET" conv=notrunc
+dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFSOFFSET" conv=notrunc

target/linux/archs38/image/uEnv.txt

@@ -0,0 +1,7 @@
+setenv kernel_addr_r 0x82000000
+setenv fdt_addr_r 0x83000000
+setenv loadkernel fatload mmc 0 \${kernel_addr_r} uImage
+setenv loaddtb fatload mmc 0 \${fdt_addr_r} \${dts}
+setenv bootargs earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 root=/dev/mmcblk0p2 rootwait print-fatal-signals=1
+setenv uenvcmd run loadkernel\; run loaddtb\; bootm \${kernel_addr_r} - \${fdt_addr_r}
+run uenvcmd

target/linux/archs38/image/uboot.env.txt

@@ -0,0 +1,29 @@
+baudrate=115200
+bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait
+bootcmd=fatload mmc 0:1 0x82000000 uImage && fatload mmc 0:1 0x81000000 hsdk.dtb && bootm 0x82000000 - 0x81000000
+bootdelay=2
+bootfile=uImage
+loadaddr=0x82000000
+stderr=serial0@f0005000
+stdin=serial0@f0005000
+stdout=serial0@f0005000
+core_dccm_0=0x10
+core_dccm_1=0x6
+core_dccm_2=0x10
+core_dccm_3=0x6
+core_iccm_0=0x10
+core_iccm_1=0x6
+core_iccm_2=0x10
+core_iccm_3=0x6
+core_mask=0xF
+dcache_ena=0x1
+icache_ena=0x1
+non_volatile_limit=0xE
+hsdk_hs34=setenv core_mask 0x2; setenv icache_ena 0x0; setenv dcache_ena 0x0; setenv core_iccm_1 0x7; setenv core_dccm_1 0x8; setenv non_volatile_limit 0x0;
+hsdk_hs36=setenv core_mask 0x1; setenv icache_ena 0x1; setenv dcache_ena 0x1; setenv core_iccm_0 0x10; setenv core_dccm_0 0x10; setenv non_volatile_limit 0xE;
+hsdk_hs36_ccm=setenv core_mask 0x2; setenv icache_ena 0x1; setenv dcache_ena 0x1; setenv core_iccm_1 0x7; setenv core_dccm_1 0x8; setenv non_volatile_limit 0xE;
+hsdk_hs38=setenv core_mask 0x1; setenv icache_ena 0x1; setenv dcache_ena 0x1; setenv core_iccm_0 0x10; setenv core_dccm_0 0x10; setenv non_volatile_limit 0xE;
+hsdk_hs38_ccm=setenv core_mask 0x2; setenv icache_ena 0x1; setenv dcache_ena 0x1; setenv core_iccm_1 0x7; setenv core_dccm_1 0x8; setenv non_volatile_limit 0xE;
+hsdk_hs38x2=setenv core_mask 0x3; setenv icache_ena 0x1; setenv dcache_ena 0x1; setenv core_iccm_0 0x10; setenv core_dccm_0 0x10; setenv non_volatile_limit 0xE; setenv core_iccm_1 0x6; setenv core_dccm_1 0x6;
+hsdk_hs38x3=setenv core_mask 0x7; setenv icache_ena 0x1; setenv dcache_ena 0x1; setenv core_iccm_0 0x10; setenv core_dccm_0 0x10; setenv non_volatile_limit 0xE; setenv core_iccm_1 0x6; setenv core_dccm_1 0x6; setenv core_iccm_2 0x10; setenv core_dccm_2 0x10;
+hsdk_hs38x4=setenv core_mask 0xF; setenv icache_ena 0x1; setenv dcache_ena 0x1; setenv core_iccm_0 0x10; setenv core_dccm_0 0x10; setenv non_volatile_limit 0xE; setenv core_iccm_1 0x6; setenv core_dccm_1 0x6; setenv core_iccm_2 0x10; setenv core_dccm_2 0x10; setenv core_iccm_3 0x6; setenv core_dccm_3 0x6;

target/linux/archs38/patches-5.4/0001-arch-arc-Add-compiler-option-for-gcc8.4.patch

@@ -0,0 +1,21 @@
+From 2e2b3aeda9af9c029bf347c974911fe96cd79c43 Mon Sep 17 00:00:00 2001
+From: Evgeniy Didin <didin@synopsys.com>
+Date: Mon, 23 Mar 2020 15:57:18 +0300
+Subject: [PATCH] arch/arc: Add compiler option for gcc8.4
+
+Signed-off-by: Evgeniy Didin <didin@synopsys.com>
+---
+ arch/arc/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arc/Makefile
++++ b/arch/arc/Makefile
+@@ -11,7 +11,7 @@ endif
+ 
+ cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
+ cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
+-cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=hs38
++cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=hs38 -mmpy-option=2
+ 
+ ifdef CONFIG_ARC_CURR_IN_REG
+ # For a global register defintion, make sure it gets passed to every file