Initial commit

target/linux/ath79/dts/ar7161_netgear_wndr.dtsi

@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	aliases {
+		led-boot = &led_power_orange;
+		led-failsafe = &led_power_orange;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_orange;
+	};
+
+	extosc: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ref";
+		clock-frequency = <40000000>;
+	};
+
+	reset-leds {
+		compatible = "reset-leds";
+
+		usb_led {
+			label = "green:usb";
+			resets = <&rst 12>;
+			trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps {
+			label = "orange:wps";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_green: power_green {
+			label = "green:power";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_orange: power_orange {
+			label = "orange:power";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		wps_green {
+			label = "green:wps";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		wan_green {
+			label = "green:wan";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ath9k-leds {
+		compatible = "gpio-leds";
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "rfkill";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	rtl8366s {
+		compatible = "realtek,rtl8366s";
+
+		gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
+
+		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			phy-mask = <0x10>;
+
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+				phy-mode = "rgmii";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb_ohci_port: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+};
+
+&usb2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb_ehci_port: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+
+	ath9k0: wifi@0,11 {
+		compatible = "pci168c,0029";
+		reg = <0x8800 0 0 0 0>;
+
+		qca,no-eeprom;
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		/* all WNDR3700 variants have four antennae dedicated
+		 * to the 2.4GHz radio. Two antennae are available for
+		 * each chain. The following configuration is the
+		 * default setting which taken from the vendor's wifi
+		 * code for that radio.
+		 *
+		 * All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
+		 *	[0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
+		 */
+		antenna-demux {
+			gpio-hog;
+			line-name = "fixed antenna group 1";
+			gpios = <6 GPIO_ACTIVE_LOW>,
+				<7 GPIO_ACTIVE_HIGH>,
+				<8 GPIO_ACTIVE_LOW>,
+				<9 GPIO_ACTIVE_HIGH>;
+			output-high;
+		};
+	};
+
+	ath9k1: wifi@0,12 {
+		compatible = "pci168c,0029";
+		reg = <0x9000 0 0 0 0>;
+
+		qca,no-eeprom;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	pll-data = <0x11110000 0x00001099 0x00991099>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	pll-data = <0x11110000 0x00001099 0x00991099>;
+
+	phy-handle = <&phy4>;
+};