Initial commit

target/linux/ath79/dts/ar9331_teltonika_rut230-v1.dts

@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Teltonika RUT230 v1";
+	compatible = "teltonika,rut230-v1", "qca,ar9331";
+
+	aliases {
+		label-mac-device = &wmac;
+		led-boot = &led_ss0;
+		led-failsafe = &led_ss0;
+		led-upgrade = &led_ss0;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <60>;
+		};
+
+		input {
+			label = "input";
+			linux,code = <BTN_0>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		sim-tray {
+			label = "sim-tray";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&switch_led_disable_pins>;
+
+		led_ss0: signal-strength-0 {
+			label = "green:signal-strength-0";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		signal-strength-1 {
+			label = "green:signal-strength-1";
+			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		signal-strength-2 {
+			label = "green:signal-strength-2";
+			gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		signal-strength-3 {
+			label = "green:signal-strength-3";
+			gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		signal-strength-4 {
+			label = "green:signal-strength4";
+			gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		2g {
+			label = "green:2g";
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		3g {
+			label = "green:3g";
+			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan {
+			label = "green:lan";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			/* GPIO 13 - ACTIVE HIGH for hwrev 0 */
+		};
+
+		wan {
+			label = "green:wan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			/* GPIO 14 - ACTIVE HIGH for hwrev 0 */
+		};
+
+		/* 4G LED - GPIO21 ACTIVE_HIGH for RUT240 */
+	};
+
+	reg_usb_vbus: reg_usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_config_0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&eth1 {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_config_0>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			config: partition@20000 {
+				label = "config";
+				reg = <0x20000 0x10000>;
+				read-only;
+			};
+
+			art: partition@30000 {
+				label = "art";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				compatible = "tplink,firmware";
+				label = "firmware";
+				reg = <0x40000 0xf30000>;
+			};
+
+			partition@f70000 {
+				label = "event-log";
+				reg = <0xf70000 0x90000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&usb {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&gpio {
+	modem-power {
+		gpio-hog;
+		output-low;
+		gpios = <18 GPIO_ACTIVE_HIGH>;
+		line-name = "modem-power";
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&art 0x1000>;
+	nvmem-cells = <&macaddr_config_0>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <2>;
+};
+
+&config {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_config_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+};