Initial commit

target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi

@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_amber;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_amber;
+		label-mac-device = &eth0;
+	};
+
+	led_spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+
+		led_gpio: led_gpio@0 {
+			compatible = "nxp,74lvc594";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			registers-number = <1>;
+			spi-max-frequency = <500000>;
+
+			gpio_latch_bit {
+				gpio-hog;
+				gpios = <4 GPIO_ACTIVE_HIGH>;
+				output-high;
+				line-name = "gpio-latch-bit";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_green: power_green {
+			label = "green:power";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_amber: power_amber {
+			label = "amber:power";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+
+		left_blue {
+			label = "blue:left";
+			gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+		};
+
+		right_blue {
+			label = "blue:right";
+			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		wps_green {
+			label = "green:wps";
+			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		client_red {
+			label = "red:client";
+			gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		client_green {
+			label = "green:client";
+			gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		router_red {
+			label = "red:router";
+			gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		router_green {
+			label = "green:router";
+			gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "WPS button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		extender_apmode {
+			label = "EXTENDER/APMODE switch";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pll {
+	clocks = <&extosc>;
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+			};
+
+			caldata: partition@50000 {
+				label = "caldata";
+				reg = <0x050000 0x010000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "caldata-backup";
+				reg = <0x060000 0x010000>;
+				read-only;
+			};
+
+			partition@70000 {
+				label = "config";
+				reg = <0x070000 0x010000>;
+			};
+
+			partition@80000 {
+				label = "pot";
+				reg = <0x080000 0x010000>;
+			};
+
+			partition@90000 {
+				label = "firmware";
+				reg = <0x090000 0xf30000>;
+				compatible = "denx,uimage";
+			};
+
+			partition@fc0000 {
+				label = "language";
+				reg = <0xfc0000 0x040000>;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&caldata 0x1000>;
+	nvmem-cells = <&macaddr_caldata_6>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+		phy-mode = "rgmii";
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_caldata_0>;
+	nvmem-cell-names = "mac-address";
+
+	phy-handle = <&phy4>;
+	phy-mode = "rgmii-rxid";
+
+	pll-data = <0x86000000 0x80000101 0x80001313>;
+};
+
+&caldata {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_caldata_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_caldata_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+};