Initial commit

target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts

@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_tl-wr1043n.dtsi"
+
+/ {
+	compatible = "tplink,tl-wr1043nd-v4", "qca,qca9563";
+	model = "TP-Link TL-WR1043ND v4";
+
+	aliases {
+		label-mac-device = &wmac;
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		gpio_usb_power {
+			gpio-export,name = "tp-link:power:usb";
+			gpio-export,output = <1>;
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "tplink,firmware";
+				label = "firmware";
+				reg = <0x020000 0xf30000>;
+			};
+
+			info: partition@f50000 {
+				label = "info";
+				reg = <0xf50000 0x020000>;
+				read-only;
+			};
+
+			partition@f70000 {
+				label = "config";
+				reg = <0xf70000 0x050000>;
+				read-only;
+			};
+
+			partition@fc0000 {
+				label = "partition-table";
+				reg = <0xfc0000 0x010000>;
+				read-only;
+			};
+
+			partition@fd0000 {
+				label = "logs";
+				reg = <0xfd0000 0x020000>;
+				read-only;
+			};
+
+			art: partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&leds {
+	usb {
+		label = "green:usb";
+		gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		trigger-sources = <&hub_port0>;
+		linux,default-trigger = "usbport";
+	};
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_port0: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+};
+
+&eth0 {
+	nvmem-cells = <&macaddr_info_8>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	mtd-cal-data = <&art 0x1000>;
+
+	nvmem-cells = <&macaddr_info_8>;
+	nvmem-cell-names = "mac-address";
+};
+
+&info {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_info_8: macaddr@8 {
+		reg = <0x8 0x6>;
+	};
+};