Initial commit

target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

@@ -0,0 +1,68 @@
+#!/bin/ash
+
+[ "$ACTION" = "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+. /lib/functions/k2t.sh
+
+board=$(board_name)
+
+case "$board" in
+	adtran,bsap1800-v2|\
+	adtran,bsap1840)
+		macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
+		;;
+	dlink,dap-1330-a1|\
+	dlink,dap-1365-a1|\
+	dlink,dch-g020-a1)
+		mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress
+		;;
+	dlink,dap-2230-a1|\
+	dlink,dap-3320-a1)
+		mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
+		;;
+	dlink,dap-2660-a1|\
+	dlink,dap-2680-a1|\
+	dlink,dap-3662-a1)
+		[ "$PHYNBR" -eq 1 ] && \
+			mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
+		;;
+	iodata,wn-ac1600dgr)
+		# There is no eeprom data for 5 GHz wlan in "art" partition
+		# which would allow to patch the macaddress
+		[ "$PHYNBR" -eq 0 ] && \
+			macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
+		;;
+	iodata,wn-ag300dgr)
+		# There is no eeprom data for 5 GHz wlan in "art" partition
+		# which would allow to patch the macaddress
+		[ "$PHYNBR" -eq 1 ] && \
+			macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
+		;;
+	phicomm,k2t)
+		# The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
+		[ "$PHYNBR" -eq 1 ] && \
+			k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
+		;;
+	siemens,ws-ap3610)
+		mtd_get_mac_ascii cfg1 RADIOADDR${PHYNBR} > /sys${DEVPATH}/macaddress
+		;;
+	trendnet,tew-823dru)
+		# set the 2.4G interface mac address to LAN MAC
+		[ "$PHYNBR" -eq 1 ] && \
+			mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
+		# set the 5G interface mac address to WAN MAC + 1
+		[ "$PHYNBR" -eq 0 ] && \
+			macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress
+		;;
+	zyxel,nbg6616)
+		# Set mac address for 2.4g device
+		[ "$PHYNBR" -eq 1 ] && \
+			mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress
+		;;
+esac