Initial commit

target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds

@@ -0,0 +1,30 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+mikrotik,routerboard-lhg-2nd)
+	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
+	;;
+mikrotik,routerboard-wapr-2nd)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "33" "100"
+	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "66" "100"
+	;;
+mikrotik,routerboard-sxt-5nd-r2)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "20" "100"
+	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "40" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "60" "100"
+	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "80" "100"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/ath79/mikrotik/base-files/etc/board.d/02_network

@@ -0,0 +1,72 @@
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+ath79_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	mikrotik,routerboard-493g)
+		ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth0.2"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan"
+		ucidef_add_switch "switch1" \
+			"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+		;;
+	mikrotik,routerboard-912uag-2hpnd|\
+	mikrotik,routerboard-921gs-5hpacd-15s|\
+	mikrotik,routerboard-lhg-2nd|\
+	mikrotik,routerboard-sxt-5nd-r2|\
+	mikrotik,routerboard-wap-g-5hact2hnd|\
+	mikrotik,routerboard-wapr-2nd)
+		ucidef_set_interface_lan "eth0"
+		;;
+	*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+	esac
+}
+
+ath79_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+	local mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)"
+
+	case "$board" in
+	mikrotik,routerboard-912uag-2hpnd|\
+	mikrotik,routerboard-921gs-5hpacd-15s|\
+	mikrotik,routerboard-lhg-2nd|\
+	mikrotik,routerboard-sxt-5nd-r2|\
+	mikrotik,routerboard-wap-g-5hact2hnd|\
+	mikrotik,routerboard-wapr-2nd)
+		label_mac="$mac_base"
+		lan_mac="$mac_base"
+		;;
+	mikrotik,routerboard-922uags-5hpacd)
+		label_mac="$mac_base"
+		lan_mac="$mac_base"
+		wan_mac=$(macaddr_add $mac_base 1)
+		;;
+	*)
+		label_mac="$mac_base"
+		wan_mac="$mac_base"
+		lan_mac=$(macaddr_add $mac_base 1)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ath79_setup_interfaces $board
+ath79_setup_macs $board
+board_config_flush
+
+exit 0