Initial commit

target/linux/ath79/nand/base-files/etc/board.d/01_leds

@@ -0,0 +1,24 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+glinet,gl-ar300m-nand|\
+glinet,gl-ar300m-nor)
+	ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
+	;;
+netgear,wndr3700-v4|\
+netgear,wndr4300|\
+netgear,wndr4300sw|\
+netgear,wndr4300-v2|\
+netgear,wndr4500-v3)
+	ucidef_set_led_switch "wan-amber" "WAN (amber)" "amber:wan" "switch0" "0x20"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/ath79/nand/base-files/etc/board.d/02_network

@@ -0,0 +1,70 @@
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+ath79_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	aerohive,hiveap-121|\
+	glinet,gl-e750)
+		ucidef_set_interface_lan "eth0"
+		;;
+	domywifi,dw33d)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:wan" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1"
+		;;
+	glinet,gl-ar750s-nor|\
+	glinet,gl-ar750s-nor-nand)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
+		;;
+	netgear,wndr3700-v4|\
+	netgear,wndr4300|\
+	netgear,wndr4300sw|\
+	netgear,wndr4300-v2|\
+	netgear,wndr4500-v3)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+		;;
+	netgear,wndr4300tn)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	zyxel,nbg6716)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
+		;;
+	*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+	esac
+}
+
+ath79_setup_macs()
+{
+	local board="$1"
+
+	case "$board" in
+	netgear,wndr3700-v4|\
+	netgear,wndr4300|\
+	netgear,wndr4300sw|\
+	netgear,wndr4300-v2|\
+	netgear,wndr4500-v3)
+		wan_mac=$(mtd_get_mac_binary caldata 0x6)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ath79_setup_interfaces $board
+ath79_setup_macs $board
+board_config_flush
+
+exit 0