Initial commit

target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a.dtsi

@@ -0,0 +1,127 @@
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		led-boot = &led_power_red;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_red;
+		led-upgrade = &led_power_red;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpiokeys: keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wlan {
+			label = "wlan";
+			gpios = <&pinctrl 9 1>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		restart {
+			label = "restart";
+			gpios = <&pinctrl 10 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 11 1>;
+			linux,code = <KEY_CONFIG>;
+			debounce-interval = <60>;
+		};
+	};
+
+	gpioleds: leds {
+		compatible = "gpio-leds";
+
+		dsl_red {
+			label = "red:dsl";
+			gpios = <&pinctrl 2 1>;
+		};
+
+		led_power_red: power_red {
+			label = "red:power";
+			gpios = <&pinctrl 3 1>;
+			default-state = "on";
+		};
+
+		lan1_red {
+			label = "red:lan1";
+			gpios = <&pinctrl 13 1>;
+		};
+
+		lan2_red {
+			label = "red:lan2";
+			gpios = <&pinctrl 22 1>;
+		};
+
+		lan3_green {
+			label = "green:lan3";
+			gpios = <&pinctrl 23 1>;
+		};
+
+		lan3_red {
+			label = "red:lan3";
+			gpios = <&pinctrl 26 1>;
+		};
+
+		lan4_green {
+			label = "green:lan4";
+			gpios = <&pinctrl 27 1>;
+		};
+
+		lan4_red {
+			label = "red:lan4";
+			gpios = <&pinctrl 28 1>;
+		};
+	};
+};
+
+&pflash {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe@0 {
+			label = "CFE";
+			reg = <0x000000 0x020000>;
+			read-only;
+		};
+
+		linux@20000 {
+			label = "linux";
+			reg = <0x020000 0xec0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		cal_data@ee0000 {
+			label = "cal_data";
+			reg = <0xee0000 0x100000>;
+			read-only;
+		};
+
+		nvram@fe0000 {
+			label = "nvram";
+			reg = <0xfe0000 0x020000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};