Initial commit

target/linux/bmips/dts/bcm63168-comtrend-vr-3032u.dts

@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm63268.dtsi"
+
+/ {
+	model = "Comtrend VR-3032u";
+	compatible = "comtrend,vr-3032u", "brcm,bcm63168", "brcm,bcm63268";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+
+		led-dsl = &led_dsl_green;
+		led-internet = &led_internet_green;
+		led-usb = &led_usb_green;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_cferom_6a0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&leds {
+	status = "okay";
+
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_serial_led>;
+
+	led@0 {
+		/* GPHY0 Spd 0 */
+		reg = <0>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <0>;
+	};
+
+	led@1 {
+		/* GPHY0 Spd 1 */
+		reg = <1>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <1>;
+	};
+
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "red:internet";
+	};
+
+	led_dsl_green: led@3 {
+		reg = <3>;
+		active-low;
+		label = "green:dsl";
+	};
+
+	led_usb_green: led@4 {
+		reg = <4>;
+		active-low;
+		label = "green:usb";
+	};
+
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "green:wps";
+	};
+
+	led_internet_green: led@8 {
+		reg = <8>;
+		active-low;
+		label = "green:internet";
+	};
+
+	led@9 {
+		/* EPHY0 Act */
+		reg = <9>;
+		brcm,hardware-controlled;
+	};
+
+	led@10 {
+		/* EPHY1 Act */
+		reg = <10>;
+		brcm,hardware-controlled;
+	};
+
+	led@11 {
+		/* EPHY2 Act */
+		reg = <11>;
+		brcm,hardware-controlled;
+	};
+
+	led@12 {
+		/* GPHY0 Act */
+		reg = <12>;
+		brcm,hardware-controlled;
+	};
+
+	led@13 {
+		/* EPHY0 Spd */
+		reg = <13>;
+		brcm,hardware-controlled;
+	};
+
+	led@14 {
+		/* EPHY1 Spd */
+		reg = <14>;
+		brcm,hardware-controlled;
+	};
+
+	led@15 {
+		/* EPHY2 Spd */
+		reg = <15>;
+		brcm,hardware-controlled;
+	};
+
+	led_power_green: led@20 {
+		reg = <20>;
+		active-low;
+		label = "green:power";
+	};
+};
+
+&nflash {
+	status = "okay";
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <15>;
+		nand-on-flash-bbt;
+		brcm,nand-oob-sector-size = <64>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cferom: partition@0 {
+				label = "cferom";
+				reg = <0x0000000 0x0020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "brcm,wfi-split";
+				label = "wfi";
+				reg = <0x0020000 0x7ac0000>;
+			};
+		};
+	};
+};
+
+&ohci {
+	status = "okay";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan2";
+
+			phy-handle = <&phy1>;
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+
+			phy-handle = <&phy2>;
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan4";
+
+			phy-handle = <&phy3>;
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+
+			phy-handle = <&phy4>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&cferom {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_cferom_6a0: macaddr@6a0 {
+		reg = <0x6a0 0x6>;
+	};
+};

target/linux/bmips/dts/bcm6318-comtrend-ar-5315u.dts

@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6318.dtsi"
+
+/ {
+	model = "Comtrend AR-5315u";
+	compatible = "comtrend,ar-5315u", "brcm,bcm6318";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+
+		led-dsl = &led_dsl_green;
+		led-internet = &led_internet_green;
+		led-usb = &led_usb_green;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+
+	bcm43217-sprom {
+		compatible = "brcm,bcm43217-sprom";
+
+		pci-bus = <1>;
+		pci-dev = <0>;
+
+		nvmem-cells = <&macaddr_cfe_6a0>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <1>;
+
+		brcm,sprom-fixups = <6 0x1c00>,
+				    <65 0x1255>,
+				    <97 0xfe55>,
+				    <98 0x171d>,
+				    <99 0xfa42>,
+				    <113 0xfeb7>,
+				    <114 0x18cd>,
+				    <115 0xfa4f>,
+				    <162 0x6444>,
+				    <170 0x6444>,
+				    <172 0x6444>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_cfe_6a0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <62500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cfe: partition@0 {
+				reg = <0x000000 0x010000>;
+				label = "cfe";
+				read-only;
+			};
+
+			partition@10000 {
+				compatible = "brcm,bcm963xx-imagetag";
+				reg = <0x010000 0xfe0000>;
+				label = "firmware";
+			};
+
+			partition@ff0000 {
+				reg = <0xff0000 0x010000>;
+				label = "nvram";
+			};
+		};
+	};
+};
+
+&leds {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_leds
+		     &pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+		     &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		label = "green:wps";
+	};
+
+	led_power_green: led@1 {
+		reg = <1>;
+		active-low;
+		label = "green:power";
+	};
+
+	led_usb_green: led@2 {
+		reg = <2>;
+		active-low;
+		label = "green:usb";
+	};
+
+	led@4 {
+		reg = <4>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <4>;
+		/* EPHY0 Act */
+	};
+
+	led@5 {
+		reg = <5>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <5>;
+		/* EPHY1 Act */
+	};
+
+	led@6 {
+		reg = <6>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <6>;
+		/* EPHY2 Act */
+	};
+
+	led@7 {
+		reg = <7>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <7>;
+		/* EPHY3 Act */
+	};
+
+	led_internet_green: led@8 {
+		reg = <8>;
+		active-low;
+		label = "green:internet";
+	};
+
+	led@9 {
+		reg = <9>;
+		active-low;
+		label = "red:internet";
+	};
+
+	led_dsl_green: led@10 {
+		reg = <10>;
+		active-low;
+		label = "green:dsl";
+	};
+
+	led_power_red: led@11 {
+		reg = <11>;
+		active-low;
+		label = "red:power";
+	};
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_leds: leds {
+		function = "led";
+		pins = "gpio0", "gpio1",
+		       "gpio2", "gpio8",
+		       "gpio9", "gpio10",
+		       "gpio11";
+	};
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+
+			phy-handle = <&phy1>;
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+
+			phy-handle = <&phy2>;
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+
+			phy-handle = <&phy3>;
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+
+			phy-handle = <&phy4>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&cfe {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_cfe_6a0: macaddr@6a0 {
+		reg = <0x6a0 0x6>;
+	};
+};

target/linux/bmips/dts/bcm6318.dtsi

@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm6318-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/bcm6318-interrupt-controller.h>
+#include <dt-bindings/reset/bcm6318-reset.h>
+#include <dt-bindings/soc/bcm6318-pm.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6318";
+
+	aliases {
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		spi1 = &hsspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		hsspi_osc: hsspi-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <250000000>;
+			clock-output-names = "hsspi_osc";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mips-hpt-frequency = <166500000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips3300", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_clk: clock-controller@10000004 {
+			compatible = "brcm,bcm6318-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		ubus_clk: clock-controller@10000008 {
+			compatible = "brcm,bcm6318-ubus-clocks";
+			reg = <0x10000008 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_rst: reset-controller@10000010 {
+			compatible = "brcm,bcm6345-reset";
+			reg = <0x10000010 0x4>;
+			#reset-cells = <1>;
+		};
+
+		ext_intc: interrupt-controller@10000018 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6318-ext-intc";
+			reg = <0x10000018 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <BCM6318_IRQ_EXT0>,
+				     <BCM6318_IRQ_EXT1>,
+				     <BCM6318_IRQ_EXT2>,
+				     <BCM6318_IRQ_EXT3>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		wdt: watchdog@10000068 {
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x10000068 0xc>;
+
+			clocks = <&periph_osc>;
+
+			timeout-sec = <30>;
+		};
+
+		pll_cntl: syscon@10000074 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000074 0x4>;
+			native-endian;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0>;
+				mask = <0x1>;
+			};
+		};
+
+		gpio_cntl: syscon@10000080 {
+			compatible = "brcm,bcm6318-gpio-sysctl",
+				     "syscon", "simple-mfd";
+			reg = <0x10000080 0x80>;
+			ranges = <0 0x10000080 0x80>;
+			native-endian;
+
+			gpio: gpio@0 {
+				compatible = "brcm,bcm6318-gpio";
+				reg-names = "dirout", "dat";
+				reg = <0x0 0x8>, <0x8 0x8>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 50>;
+				#gpio-cells = <2>;
+			};
+
+			pinctrl: pinctrl@18 {
+				compatible = "brcm,bcm6318-pinctrl";
+				reg = <0x18 0x10>, <0x54 0x18>;
+
+				pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+					function = "ephy0_spd_led";
+					pins = "gpio0";
+				};
+
+				pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+					function = "ephy1_spd_led";
+					pins = "gpio1";
+				};
+
+				pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+					function = "ephy2_spd_led";
+					pins = "gpio2";
+				};
+
+				pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+					function = "ephy3_spd_led";
+					pins = "gpio3";
+				};
+
+				pinctrl_ephy0_act_led: ephy0_act_led-pins {
+					function = "ephy0_act_led";
+					pins = "gpio4";
+				};
+
+				pinctrl_ephy1_act_led: ephy1_act_led-pins {
+					function = "ephy1_act_led";
+					pins = "gpio5";
+				};
+
+				pinctrl_ephy2_act_led: ephy2_act_led-pins {
+					function = "ephy2_act_led";
+					pins = "gpio6";
+				};
+
+				pinctrl_ephy3_act_led: ephy3_act_led-pins {
+					function = "ephy3_act_led";
+					pins = "gpio7";
+				};
+
+				pinctrl_serial_led: serial_led-pins {
+					pinctrl_serial_led_data: serial_led_data-pins {
+						function = "serial_led_data";
+						pins = "gpio6";
+					};
+
+					pinctrl_serial_led_clk: serial_led_clk-pins {
+						function = "serial_led_clk";
+						pins = "gpio7";
+					};
+				};
+
+				pinctrl_inet_act_led: inet_act_led-pins {
+					function = "inet_act_led";
+					pins = "gpio8";
+				};
+
+				pinctrl_inet_fail_led: inet_fail_led-pins {
+					function = "inet_fail_led";
+					pins = "gpio9";
+				};
+
+				pinctrl_dsl_led: dsl_led-pins {
+					function = "dsl_led";
+					pins = "gpio10";
+				};
+
+				pinctrl_post_fail_led: post_fail_led-pins {
+					function = "post_fail_led";
+					pins = "gpio11";
+				};
+
+				pinctrl_wlan_wps_led: wlan_wps_led-pins {
+					function = "wlan_wps_led";
+					pins = "gpio12";
+				};
+
+				pinctrl_usb_pwron: usb_pwron-pins {
+					function = "usb_pwron";
+					pins = "gpio13";
+				};
+
+				pinctrl_usb_device_led: usb_device_led-pins {
+					function = "usb_device_led";
+					pins = "gpio13";
+				};
+
+				pinctrl_usb_active: usb_active-pins {
+					function = "usb_active";
+					pins = "gpio40";
+				};
+			};
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6318_IRQ_UART0>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		leds: led-controller@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10000200 0x24>;
+
+			status = "disabled";
+		};
+
+		periph_pwr: power-controller@100008e8 {
+			compatible = "brcm,bcm6318-power-controller";
+			reg = <0x100008e8 0x4>;
+
+			#power-domain-cells = <1>;
+		};
+
+		hsspi: spi@10003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-hsspi";
+			reg = <0x10003000 0x600>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6318_IRQ_HSSPI>;
+
+			clocks = <&periph_clk BCM6318_CLK_HSSPI>,
+				 <&hsspi_osc>;
+			clock-names = "hsspi",
+				      "pll";
+
+			resets = <&periph_rst BCM6318_RST_SPI>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10005000 {
+			compatible = "brcm,bcm6318-ehci", "generic-ehci";
+			reg = <0x10005000 0x100>;
+			big-endian;
+			spurious-oc;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6318_IRQ_EHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci: usb@10005100 {
+			compatible = "brcm,bcm6318-ohci", "generic-ohci";
+			reg = <0x10005100 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6318_IRQ_OHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10005200 {
+			compatible = "brcm,bcm6318-usbh-phy";
+			reg = <0x10005200 0x38>;
+
+			#phy-cells = <1>;
+
+			clocks = <&periph_clk BCM6318_CLK_USBD>,
+				 <&ubus_clk BCM6318_UCLK_USB>;
+			clock-names = "usbh",
+				      "usb_ref";
+
+			power-domains = <&periph_pwr BCM6318_POWER_DOMAIN_USB>;
+			resets = <&periph_rst BCM6318_RST_USBH>;
+
+			status = "disabled";
+		};
+
+		pcie: pcie@10010000 {
+			compatible = "brcm,bcm6318-pcie";
+			reg = <0x10010000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+			bus-range = <0x00 0x01>;
+			ranges = <0x2000000 0 0x10200000 0x10200000 0 0x100000>;
+			linux,pci-probe-only = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6318_IRQ_PCIE_RC>;
+
+			clocks = <&periph_clk BCM6318_CLK_PCIE>,
+				 <&periph_clk BCM6318_CLK_PCIE25>,
+				 <&ubus_clk BCM6318_UCLK_PCIE>;
+			clock-names = "pcie",
+				      "pcie25",
+				      "pcie-ubus";
+
+			resets = <&periph_rst BCM6318_RST_PCIE>,
+				 <&periph_rst BCM6318_RST_PCIE_EXT>,
+				 <&periph_rst BCM6318_RST_PCIE_CORE>,
+				 <&periph_rst BCM6318_RST_PCIE_HARD>;
+			reset-names = "pcie",
+				      "pcie-ext",
+				      "pcie-core",
+				      "pcie-hard";
+
+			power-domains = <&periph_pwr BCM6318_POWER_DOMAIN_PCIE>;
+
+			status = "disabled";
+		};
+
+		switch0: switch@10080000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-switch";
+			reg = <0x10080000 0x8000>;
+			big-endian;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+
+					phy-mode = "internal";
+					ethernet = <&ethernet>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+		mdio: mdio@100800b0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6368-mdio-mux";
+			reg = <0x100800b0 0x8>;
+
+			mdio_int: mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <4>;
+				};
+			};
+
+			mdio_ext: mdio@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+		};
+
+		ethernet: ethernet@10088000 {
+			compatible = "brcm,bcm6318-enetsw";
+			reg = <0x10088000 0x80>,
+			      <0x10088200 0x80>,
+			      <0x10088400 0x80>;
+			reg-names = "dma",
+				    "dma-channels",
+				    "dma-sram";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6318_IRQ_ENETSW_RX_DMA0>,
+				     <BCM6318_IRQ_ENETSW_TX_DMA0>;
+			interrupt-names = "rx",
+					  "tx";
+
+			clocks = <&periph_clk BCM6318_CLK_ROBOSW250>,
+				 <&periph_clk BCM6318_CLK_ROBOSW025>,
+				 <&ubus_clk BCM6318_UCLK_ROBOSW>;
+
+			resets = <&periph_rst BCM6318_RST_ENETSW>,
+				 <&periph_rst BCM6318_RST_EPHY>;
+
+			power-domains = <&periph_pwr BCM6318_POWER_DOMAIN_EPHY0>,
+					<&periph_pwr BCM6318_POWER_DOMAIN_EPHY1>,
+					<&periph_pwr BCM6318_POWER_DOMAIN_EPHY2>,
+					<&periph_pwr BCM6318_POWER_DOMAIN_EPHY3>;
+
+			dma-rx = <0>;
+			dma-tx = <1>;
+
+			status = "disabled";
+		};
+	};
+};

target/linux/bmips/dts/bcm63268.dtsi

@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm63268-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/bcm63268-interrupt-controller.h>
+#include <dt-bindings/reset/bcm63268-reset.h>
+#include <dt-bindings/soc/bcm63268-pm.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63268";
+
+	aliases {
+		nflash = &nflash;
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &lsspi;
+		spi1 = &hsspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		hsspi_osc: hsspi-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <400000000>;
+			clock-output-names = "hsspi_osc";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_clk: clock-controller@10000004 {
+			compatible = "brcm,bcm63268-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		pll_cntl: syscon@10000008 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000008 0x4>;
+			native-endian;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x0>;
+				mask = <0x1>;
+			};
+		};
+
+		periph_rst: reset-controller@10000010 {
+			compatible = "brcm,bcm6345-reset";
+			reg = <0x10000010 0x4>;
+			#reset-cells = <1>;
+		};
+
+		ext_intc: interrupt-controller@10000018 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0x10000018 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <BCM63268_IRQ_EXT0>,
+				     <BCM63268_IRQ_EXT1>,
+				     <BCM63268_IRQ_EXT2>,
+				     <BCM63268_IRQ_EXT3>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>,
+			      <0x10000040 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		wdt: watchdog@1000009c {
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x1000009c 0xc>;
+
+			clocks = <&periph_osc>;
+
+			timeout-sec = <30>;
+		};
+
+		timer_clk: clock-controller@100000ac {
+			compatible = "brcm,bcm63268-timer-clocks";
+			reg = <0x100000ac 0x4>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpio_cntl: syscon@100000c0 {
+			compatible = "brcm,bcm63268-gpio-sysctl",
+				     "syscon", "simple-mfd";
+			reg = <0x100000c0 0x80>;
+			ranges = <0 0x100000c0 0x80>;
+			native-endian;
+
+			gpio: gpio@0 {
+				compatible = "brcm,bcm63268-gpio";
+				reg-names = "dirout", "dat";
+				reg = <0x0 0x8>, <0x8 0x8>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 52>;
+				#gpio-cells = <2>;
+			};
+
+			pinctrl: pinctrl@10 {
+				compatible = "brcm,bcm63268-pinctrl";
+				reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
+
+				pinctrl_serial_led: serial_led-pins {
+					pinctrl_serial_led_clk: serial_led_clk-pins {
+						function = "serial_led_clk";
+						pins = "gpio0";
+					};
+
+					pinctrl_serial_led_data: serial_led_data-pins {
+						function = "serial_led_data";
+						pins = "gpio1";
+					};
+				};
+
+				pinctrl_hsspi_cs4: hsspi_cs4-pins {
+					function = "hsspi_cs4";
+					pins = "gpio16";
+				};
+
+				pinctrl_hsspi_cs5: hsspi_cs5-pins {
+					function = "hsspi_cs5";
+					pins = "gpio17";
+				};
+
+				pinctrl_hsspi_cs6: hsspi_cs6-pins {
+					function = "hsspi_cs6";
+					pins = "gpio8";
+				};
+
+				pinctrl_hsspi_cs7: hsspi_cs7-pins {
+					function = "hsspi_cs7";
+					pins = "gpio9";
+				};
+
+				pinctrl_adsl_spi: adsl_spi {
+					pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+						function = "adsl_spi_miso";
+						pins = "gpio18";
+					};
+
+					pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+						function = "adsl_spi_mosi";
+						pins = "gpio19";
+					};
+				};
+
+				pinctrl_vreq_clk: vreq_clk-pins {
+					function = "vreq_clk";
+					pins = "gpio22";
+				};
+
+				pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
+					function = "pcie_clkreq_b";
+					pins = "gpio23";
+				};
+
+				pinctrl_robosw_led_clk: robosw_led_clk-pins {
+					function = "robosw_led_clk";
+					pins = "gpio30";
+				};
+
+				pinctrl_robosw_led_data: robosw_led_data-pins {
+					function = "robosw_led_data";
+					pins = "gpio31";
+				};
+
+				pinctrl_nand: nand-pins {
+					function = "nand";
+					group = "nand_grp";
+				};
+
+				pinctrl_gpio35_alt: gpio35_alt-pins {
+					function = "gpio35_alt";
+					pin = "gpio35";
+				};
+
+				pinctrl_dectpd: dectpd-pins {
+					function = "dectpd";
+					group = "dectpd_grp";
+				};
+
+				pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
+					function = "vdsl_phy_override_0";
+					group = "vdsl_phy_override_0_grp";
+				};
+
+				pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
+					function = "vdsl_phy_override_1";
+					group = "vdsl_phy_override_1_grp";
+				};
+
+				pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
+					function = "vdsl_phy_override_2";
+					group = "vdsl_phy_override_2_grp";
+				};
+
+				pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
+					function = "vdsl_phy_override_3";
+					group = "vdsl_phy_override_3_grp";
+				};
+
+				pinctrl_dsl_gpio8: dsl_gpio8-pins {
+					function = "dsl_gpio8";
+					group = "dsl_gpio8";
+				};
+
+				pinctrl_dsl_gpio9: dsl_gpio9-pins {
+					function = "dsl_gpio9";
+					group = "dsl_gpio9";
+				};
+			};
+		};
+
+		uart0: serial@10000180 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000180 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_UART0>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		uart1: serial@100001a0 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x100001a0 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_UART1>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		nflash: nand@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v4.0",
+				     "brcm,brcmnand";
+			reg = <0x10000200 0x180>,
+			      <0x10000600 0x200>,
+			      <0x100000b0 0x10>;
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_NAND>;
+
+			clocks = <&periph_clk BCM63268_CLK_NAND>;
+			clock-names = "nand";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+
+			status = "disabled";
+		};
+
+		lsspi: spi@10000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-spi";
+			reg = <0x10000800 0x70c>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_LSSPI>;
+
+			clocks = <&periph_clk BCM63268_CLK_SPI>;
+			clock-names = "spi";
+
+			resets = <&periph_rst BCM63268_RST_SPI>;
+
+			status = "disabled";
+		};
+
+		hsspi: spi@10001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-hsspi";
+			reg = <0x10001000 0x600>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_HSSPI>;
+
+			clocks = <&periph_clk BCM63268_CLK_HSSPI>,
+				 <&hsspi_osc>;
+			clock-names = "hsspi",
+				      "pll";
+
+			resets = <&periph_rst BCM63268_RST_SPI>;
+
+			status = "disabled";
+		};
+
+		serdes_cntl: syscon@10001804 {
+			compatible = "syscon";
+			reg = <0x10001804 0x4>;
+			native-endian;
+		};
+
+		periph_pwr: power-controller@1000184c {
+			compatible = "brcm,bcm63268-power-controller";
+			reg = <0x1000184c 0x4>;
+			#power-domain-cells = <1>;
+		};
+
+		leds: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm63268-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+			spurious-oc;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_EHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm63268-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_OHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10002700 {
+			compatible = "brcm,bcm63268-usbh-phy";
+			reg = <0x10002700 0x38>;
+
+			#phy-cells = <1>;
+
+			clocks = <&periph_clk BCM63268_CLK_USBH>,
+				 <&timer_clk BCM63268_TCLK_USB_REF>;
+			clock-names = "usbh",
+				      "usb_ref";
+
+			power-domains = <&periph_pwr BCM63268_POWER_DOMAIN_USBH>;
+			resets = <&periph_rst BCM63268_RST_USBH>;
+
+			status = "disabled";
+		};
+
+		ethernet: ethernet@1000d800 {
+			compatible = "brcm,bcm63268-enetsw";
+			reg = <0x1000d800 0x80>,
+			      <0x1000da00 0x80>,
+			      <0x1000dc00 0x80>;
+			reg-names = "dma",
+				    "dma-channels",
+				    "dma-sram";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_ENETSW_RX_DMA0>,
+				     <BCM63268_IRQ_ENETSW_TX_DMA0>;
+			interrupt-names = "rx",
+					  "tx";
+
+			clocks = <&periph_clk BCM63268_CLK_GMAC>,
+				 <&periph_clk BCM63268_CLK_ROBOSW>,
+				 <&periph_clk BCM63268_CLK_ROBOSW250>,
+				 <&timer_clk BCM63268_TCLK_EPHY1>,
+				 <&timer_clk BCM63268_TCLK_EPHY2>,
+				 <&timer_clk BCM63268_TCLK_EPHY3>,
+				 <&timer_clk BCM63268_TCLK_GPHY1>;
+
+			resets = <&periph_rst BCM63268_RST_ENETSW>,
+				 <&periph_rst BCM63268_RST_EPHY>,
+				 <&periph_rst BCM63268_RST_GPHY>;
+
+			power-domains = <&periph_pwr BCM63268_POWER_DOMAIN_ROBOSW>;
+
+			dma-rx = <0>;
+			dma-tx = <1>;
+
+			status = "disabled";
+		};
+
+		pcie: pcie@106e0000 {
+			compatible = "brcm,bcm6328-pcie";
+			reg = <0x106e0000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+			bus-range = <0x00 0x01>;
+			ranges = <0x2000000 0 0x11000000 0x11000000 0 0xf00000>;
+			linux,pci-probe-only = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM63268_IRQ_PCIE_RC>;
+
+			clocks = <&periph_clk BCM63268_CLK_PCIE>;
+			clock-names = "pcie";
+
+			resets = <&periph_rst BCM63268_RST_PCIE>,
+				 <&periph_rst BCM63268_RST_PCIE_EXT>,
+				 <&periph_rst BCM63268_RST_PCIE_CORE>,
+				 <&periph_rst BCM63268_RST_PCIE_HARD>;
+			reset-names = "pcie",
+				      "pcie-ext",
+				      "pcie-core",
+				      "pcie-hard";
+
+			power-domains = <&periph_pwr BCM63268_POWER_DOMAIN_PCIE>;
+
+			brcm,serdes = <&serdes_cntl>;
+
+			status = "disabled";
+		};
+
+		switch0: switch@10700000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-switch";
+			reg = <0x10700000 0x8000>;
+			big-endian;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+
+					phy-mode = "internal";
+					ethernet = <&ethernet>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+		mdio: mdio@107000b0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6368-mdio-mux";
+			reg = <0x107000b0 0x8>;
+
+			mdio_int: mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <4>;
+				};
+			};
+
+			mdio_ext: mdio@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+		};
+	};
+};

target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts

@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328.dtsi"
+
+/ {
+	model = "Comtrend AR-5387un";
+	compatible = "comtrend,ar-5387un", "brcm,bcm6328";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+
+		led-dsl = &led_dsl_green;
+		led-internet = &led_internet_green;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+
+	bcm43225-sprom {
+		compatible = "brcm,bcm43225-sprom";
+
+		pci-bus = <1>;
+		pci-dev = <0>;
+
+		nvmem-cells = <&macaddr_cfe_6a0>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <1>;
+
+		brcm,sprom-fixups = <2 0x05bb>,
+				    <65 0x1204>,
+				    <78 0x0303>,
+				    <79 0x0202>,
+				    <80 0xff02>,
+				    <87 0x0315>,
+				    <88 0x0315>,
+				    <96 0x2048>,
+				    <97 0xff11>,
+				    <98 0x1567>,
+				    <99 0xfb24>,
+				    <100 0x3e3c>,
+				    <101 0x4038>,
+				    <102 0xfe7f>,
+				    <103 0x1279>,
+				    <112 0x2048>,
+				    <113 0xff03>,
+				    <114 0x154c>,
+				    <115 0xfb27>,
+				    <116 0x3e3c>,
+				    <117 0x4038>,
+				    <118 0xfe87>,
+				    <119 0x1233>,
+				    <203 0x2226>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_cfe_6a0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <16666667>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cfe: partition@0 {
+				reg = <0x000000 0x010000>;
+				label = "cfe";
+				read-only;
+			};
+
+			partition@10000 {
+				compatible = "brcm,bcm963xx-imagetag";
+				reg = <0x010000 0xfe0000>;
+				label = "firmware";
+			};
+
+			partition@ff0000 {
+				reg = <0xff0000 0x010000>;
+				label = "nvram";
+			};
+		};
+	};
+};
+
+&leds {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_leds>;
+
+	led@1 {
+		reg = <1>;
+		label = "red:internet";
+	};
+
+	led_power_red: led@4 {
+		reg = <4>;
+		label = "red:power";
+	};
+
+	led_internet_green: led@7 {
+		reg = <7>;
+		label = "green:internet";
+	};
+
+	led_power_green: led@8 {
+		reg = <8>;
+		label = "green:power";
+	};
+
+	led_dsl_green: led@11 {
+		reg = <11>;
+		active-low;
+		label = "green:dsl";
+	};
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_leds: leds {
+		function = "led";
+		pins = "gpio1", "gpio4", "gpio7",
+		       "gpio8", "gpio11";
+	};
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+
+			phy-handle = <&phy1>;
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+
+			phy-handle = <&phy2>;
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+
+			phy-handle = <&phy3>;
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+
+			phy-handle = <&phy4>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&cfe {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_cfe_6a0: macaddr@6a0 {
+		reg = <0x6a0 0x6>;
+	};
+};

target/linux/bmips/dts/bcm6328.dtsi

@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm6328-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/bcm6328-interrupt-controller.h>
+#include <dt-bindings/reset/bcm6328-reset.h>
+#include <dt-bindings/soc/bcm6328-pm.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6328";
+
+	aliases {
+		nflash = &nflash;
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi1 = &hsspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		hsspi_osc: hsspi-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <133333333>;
+			clock-output-names = "hsspi_osc";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mips-hpt-frequency = <160000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_clk: clock-controller@10000004 {
+			compatible = "brcm,bcm6328-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_rst: reset-controller@10000010 {
+			compatible = "brcm,bcm6345-reset";
+			reg = <0x10000010 0x4>;
+			#reset-cells = <1>;
+		};
+
+		ext_intc: interrupt-controller@10000018 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0x10000018 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <BCM6328_IRQ_EXTO>,
+				     <BCM6328_IRQ_EXT1>,
+				     <BCM6328_IRQ_EXT2>,
+				     <BCM6328_IRQ_EXT3>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		wdt: watchdog@1000005c {
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x1000005c 0xc>;
+
+			clocks = <&periph_osc>;
+
+			timeout-sec = <30>;
+		};
+
+		pll_cntl: syscon@10000068 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000068 0x4>;
+			native-endian;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0>;
+				mask = <0x1>;
+			};
+		};
+
+		gpio_cntl: syscon@10000080 {
+			compatible = "brcm,bcm6328-gpio-sysctl",
+				     "syscon", "simple-mfd";
+			reg = <0x10000080 0x80>;
+			ranges = <0 0x10000080 0x80>;
+			native-endian;
+
+			gpio: gpio@0 {
+				compatible = "brcm,bcm6328-gpio";
+				reg-names = "dirout", "dat";
+				reg = <0x0 0x8>, <0x8 0x8>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
+				#gpio-cells = <2>;
+			};
+
+			pinctrl: pinctrl@18 {
+				compatible = "brcm,bcm6328-pinctrl";
+				reg = <0x18 0x10>;
+
+				pinctrl_serial_led: serial_led-pins {
+					pinctrl_serial_led_data: serial_led_data-pins {
+						function = "serial_led_data";
+						pins = "gpio6";
+					};
+
+					pinctrl_serial_led_clk: serial_led_clk-pins {
+						function = "serial_led_clk";
+						pins = "gpio7";
+					};
+				};
+
+				pinctrl_inet_act_led: inet_act_led-pins {
+					function = "inet_act_led";
+					pins = "gpio11";
+				};
+
+				pinctrl_pcie_clkreq: pcie_clkreq-pins {
+					function = "pcie_clkreq";
+					pins = "gpio16";
+				};
+
+				pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+					function = "led";
+					pins = "gpio17";
+				};
+
+				pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+					function = "led";
+					pins = "gpio18";
+				};
+
+				pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+					function = "led";
+					pins = "gpio19";
+				};
+
+				pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+					function = "led";
+					pins = "gpio20";
+				};
+
+				pinctrl_ephy0_act_led: ephy0_act_led-pins {
+					function = "ephy0_act_led";
+					pins = "gpio25";
+				};
+
+				pinctrl_ephy1_act_led: ephy1_act_led-pins {
+					function = "ephy1_act_led";
+					pins = "gpio26";
+				};
+
+				pinctrl_ephy2_act_led: ephy2_act_led-pins {
+					function = "ephy2_act_led";
+					pins = "gpio27";
+				};
+
+				pinctrl_ephy3_act_led: ephy3_act_led-pins {
+					function = "ephy3_act_led";
+					pins = "gpio28";
+				};
+
+				pinctrl_hsspi_cs1: hsspi_cs1-pins {
+					function = "hsspi_cs1";
+					pins = "hsspi_cs1";
+				};
+
+				pinctrl_usb_port1_device: usb_port1_device-pins {
+					function = "usb_device_port";
+					pins = "usb_port1";
+				};
+
+				pinctrl_usb_port1_host: usb_port1_host-pins {
+					function = "usb_host_port";
+					pins = "usb_port1";
+				};
+			};
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6328_IRQ_UART0>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6328_IRQ_UART1>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		nflash: nand@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v2.2",
+				     "brcm,brcmnand";
+			reg = <0x10000200 0x180>,
+			      <0x10000400 0x200>,
+			      <0x10000070 0x10>;
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6328_IRQ_NAND>;
+
+			status = "disabled";
+		};
+
+		leds: led-controller@10000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10000800 0x24>;
+
+			status = "disabled";
+		};
+
+		hsspi: spi@10001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-hsspi";
+			reg = <0x10001000 0x600>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6328_IRQ_HSSPI>;
+
+			clocks = <&periph_clk BCM6328_CLK_HSSPI>,
+				 <&hsspi_osc>;
+			clock-names = "hsspi",
+				      "pll";
+
+			resets = <&periph_rst BCM6328_RST_SPI>;
+
+			status = "disabled";
+		};
+
+		serdes_cntl: syscon@10001800 {
+			compatible = "syscon";
+			reg = <0x10001800 0x4>;
+			native-endian;
+		};
+
+		periph_pwr: power-controller@10001848 {
+			compatible = "brcm,bcm6328-power-controller";
+			reg = <0x10001848 0x4>;
+
+			#power-domain-cells = <1>;
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6328-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+			spurious-oc;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6328_IRQ_EHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6328-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6328_IRQ_OHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10002700 {
+			compatible = "brcm,bcm6328-usbh-phy";
+			reg = <0x10002700 0x38>;
+
+			#phy-cells = <1>;
+
+			clocks = <&periph_clk BCM6328_CLK_USBH>;
+			clock-names = "usbh";
+
+			power-domains = <&periph_pwr BCM6328_POWER_DOMAIN_USBH>;
+			resets = <&periph_rst BCM6328_RST_USBH>;
+
+			status = "disabled";
+		};
+
+		ethernet: ethernet@1000d800 {
+			compatible = "brcm,bcm6328-enetsw";
+			reg = <0x1000d800 0x80>,
+			      <0x1000da00 0x80>,
+			      <0x1000dc00 0x80>;
+			reg-names = "dma",
+				    "dma-channels",
+				    "dma-sram";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6328_IRQ_ENETSW_RX_DMA0>,
+				     <BCM6328_IRQ_ENETSW_TX_DMA0>;
+			interrupt-names = "rx",
+					  "tx";
+
+			clocks = <&periph_clk BCM6328_CLK_ROBOSW>;
+
+			resets = <&periph_rst BCM6328_RST_ENETSW>,
+				 <&periph_rst BCM6328_RST_EPHY>;
+
+			power-domains = <&periph_pwr BCM6328_POWER_DOMAIN_ROBOSW>,
+					<&periph_pwr BCM6328_POWER_DOMAIN_EPHY>;
+
+			dma-rx = <0>;
+			dma-tx = <1>;
+
+			status = "disabled";
+		};
+
+		switch0: switch@10e00000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-switch";
+			reg = <0x10e00000 0x8000>;
+			big-endian;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+
+					phy-mode = "internal";
+					ethernet = <&ethernet>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+		mdio: mdio@10e000b0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6368-mdio-mux";
+			reg = <0x10e000b0 0x8>;
+
+			mdio_int: mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <4>;
+				};
+			};
+
+			mdio_ext: mdio@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+		};
+
+		pcie: pcie@10e40000 {
+			compatible = "brcm,bcm6328-pcie";
+			reg = <0x10e40000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+			bus-range = <0x00 0x01>;
+			ranges = <0x2000000 0 0x10f00000 0x10f00000 0 0x100000>;
+			linux,pci-probe-only = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6328_IRQ_PCIE_RC>;
+
+			clocks = <&periph_clk BCM6328_CLK_PCIE>;
+			clock-names = "pcie";
+
+			resets = <&periph_rst BCM6328_RST_PCIE>,
+				 <&periph_rst BCM6328_RST_PCIE_EXT>,
+				 <&periph_rst BCM6328_RST_PCIE_CORE>,
+				 <&periph_rst BCM6328_RST_PCIE_HARD>;
+			reset-names = "pcie",
+				      "pcie-ext",
+				      "pcie-core",
+				      "pcie-hard";
+
+			power-domains = <&periph_pwr BCM6328_POWER_DOMAIN_PCIE>;
+
+			brcm,serdes = <&serdes_cntl>;
+
+			status = "disabled";
+		};
+	};
+};

target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts

@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6358.dtsi"
+
+/ {
+	compatible = "huawei,hg556a-b", "brcm,bcm6358";
+	model = "Huawei EchoLife HG556a (version B)";
+
+	aliases {
+		led-boot = &led_power_red;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_red;
+		led-upgrade = &led_power_red;
+
+		led-dsl = &led_dsl_red;
+		led-usb = &led_hspa_red;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		help {
+			label = "help";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HELP>;
+			debounce-interval = <60>;
+		};
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		restart {
+			label = "restart";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CONFIG>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "red:message";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_hspa_red: led@1 {
+			label = "red:hspa";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led_dsl_red: led@2 {
+			label = "red:dsl";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_red: led@3 {
+			label = "red:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led@6 {
+			label = "all";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led@12 {
+			label = "green:lan1";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led@13 {
+			label = "red:lan1";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led@15 {
+			label = "green:lan2";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led@22 {
+			label = "red:lan2";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led@23 {
+			label = "green:lan3";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led@26 {
+			label = "red:lan3";
+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led@27 {
+			label = "green:lan4";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led@28 {
+			label = "red:lan4";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ath9k-fixup {
+		compatible = "brcm,ath9k-fixup";
+		reg = <0x30000000 0x8000000>;
+
+		pci-dev = <1>;
+
+		nvmem-cells = <&macaddr_cfe_6a0>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <1>;
+
+		ath,eeprom = <&cal_data 0x1e000>;
+		ath,endian-check;
+		ath,led-pin = <2>;
+		ath,led-active-high;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pci {
+	status = "okay";
+};
+
+&pflash {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe: partition@0 {
+			label = "cfe";
+			reg = <0x000000 0x020000>;
+			read-only;
+		};
+
+		partition@20000 {
+			label = "firmware";
+			reg = <0x020000 0xec0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		cal_data: partition@ee0000 {
+			label = "cal_data";
+			reg = <0xee0000 0x100000>;
+			read-only;
+		};
+
+		partition@fe0000 {
+			label = "nvram";
+			reg = <0xfe0000 0x020000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&cfe {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_cfe_6a0: macaddr@6a0 {
+		reg = <0x6a0 0x6>;
+	};
+};

target/linux/bmips/dts/bcm6358.dtsi

@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm6358-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h>
+#include <dt-bindings/reset/bcm6358-reset.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6358";
+
+	aliases {
+		pflash = &pflash;
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &lsspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	pflash: nor@1e000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x1e000000 0x2000000>;
+		bank-width = <2>;
+
+		status = "disabled";
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_clk: clock-controller@fffe0004 {
+			compatible = "brcm,bcm6358-clocks";
+			reg = <0xfffe0004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		pll_cntl: syscon@fffe0008 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0xfffe0008 0x4>;
+			native-endian;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x0>;
+				mask = <0x1>;
+			};
+		};
+
+		periph_intc: interrupt-controller@fffe000c {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfffe000c 0x8>,
+			      <0xfffe0038 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		ext_intc0: interrupt-controller@fffe0014 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0xfffe0014 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <BCM6358_IRQ_EXT0>,
+				     <BCM6358_IRQ_EXT1>,
+				     <BCM6358_IRQ_EXT2>,
+				     <BCM6358_IRQ_EXT3>;
+		};
+
+		ext_intc1: interrupt-controller@fffe001c {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0xfffe001c 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <BCM6358_IRQ_EXT4>,
+				     <BCM6358_IRQ_EXT5>;
+		};
+
+		periph_rst: reset-controller@fffe0034 {
+			compatible = "brcm,bcm6345-reset";
+			reg = <0xfffe0034 0x4>;
+			#reset-cells = <1>;
+		};
+
+		wdt: watchdog@fffe005c {
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0xfffe005c 0xc>;
+
+			clocks = <&periph_osc>;
+
+			timeout-sec = <30>;
+		};
+
+		gpio_cntl: syscon@fffe0080 {
+			compatible = "brcm,bcm6358-gpio-sysctl",
+				     "syscon", "simple-mfd";
+			reg = <0xfffe0080 0x50>;
+			ranges = <0 0xfffe0080 0x80>;
+			native-endian;
+
+			gpio: gpio@0 {
+				compatible = "brcm,bcm6358-gpio";
+				reg-names = "dirout", "dat";
+				reg = <0x0 0x8>, <0x8 0x8>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 40>;
+				#gpio-cells = <2>;
+			};
+
+			pinctrl: pinctrl@18 {
+				compatible = "brcm,bcm6358-pinctrl";
+				reg = <0x18 0x4>;
+
+				pinctrl_ebi_cs: ebi_cs-pins {
+					function = "ebi_cs";
+					groups = "ebi_cs_grp";
+				};
+
+				pinctrl_uart1: uart1-pins {
+					function = "uart1";
+					groups = "uart1_grp";
+				};
+
+				pinctrl_serial_led: serial_led-pins {
+					function = "serial_led";
+					groups = "serial_led_grp";
+				};
+
+				pinctrl_legacy_led: legacy_led-pins {
+					function = "legacy_led";
+					groups = "legacy_led_grp";
+				};
+
+				pinctrl_led: led-pins {
+					function = "led";
+					groups = "led_grp";
+				};
+
+				pinctrl_spi_cs_23: spi_cs-pins {
+					function = "spi_cs";
+					groups = "spi_cs_grp";
+				};
+
+				pinctrl_utopia: utopia-pins {
+					function = "utopia";
+					groups = "utopia_grp";
+				};
+
+				pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
+					function = "pwm_syn_clk";
+					groups = "pwm_syn_clk_grp";
+				};
+
+				pinctrl_sys_irq: sys_irq-pins {
+					function = "sys_irq";
+					groups = "sys_irq_grp";
+				};
+			};
+		};
+
+		leds: led-controller@fffe00d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0xfffe00d0 0x8>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@fffe0100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6358_IRQ_UART0>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		uart1: serial@fffe0120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6358_IRQ_UART1>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		lsspi: spi@fffe0800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-spi";
+			reg = <0xfffe0800 0x70c>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6358_IRQ_SPI>;
+
+			clocks = <&periph_clk BCM6358_CLK_SPI>;
+			clock-names = "spi";
+
+			resets = <&periph_rst BCM6358_RST_SPI>;
+
+			status = "disabled";
+		};
+
+		pci: pci@fffe1000 {
+			compatible = "brcm,bcm6348-pci";
+			reg = <0xfffe1000 0x200>,
+			      <0x08000000 0x10000>;
+			reg-names = "pci",
+				    "pci-io";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+			bus-range = <0x00 0x01>;
+			ranges = <0x2000000 0 0x30000000 0x30000000 0 0x8000000>;
+			linux,pci-probe-only = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6358_IRQ_MPI>;
+
+			resets = <&periph_rst BCM6358_RST_MPI>;
+			reset-names = "pci";
+
+			brcm,remap;
+
+			status = "disabled";
+		};
+
+		ehci: usb@fffe1300 {
+			compatible = "brcm,bcm6358-ehci", "generic-ehci";
+			reg = <0xfffe1300 0x100>;
+			big-endian;
+			spurious-oc;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6358_IRQ_EHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci: usb@fffe1400 {
+			compatible = "brcm,bcm6358-ohci", "generic-ohci";
+			reg = <0xfffe1400 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6358_IRQ_OHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@fffe1500 {
+			compatible = "brcm,bcm6358-usbh-phy";
+			reg = <0xfffe1500 0x38>;
+
+			#phy-cells = <1>;
+
+			resets = <&periph_rst BCM6358_RST_USBH>;
+
+			status = "disabled";
+		};
+	};
+};

target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts

@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6362.dtsi"
+
+/ {
+	model = "Netgear DGND3700 v2";
+	compatible = "netgear,dgnd3700-v2", "brcm,bcm6362";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+
+		led-dsl = &led_dsl_green;
+		led-ethernet = &led_ethernet_green;
+		led-internet = &led_internet_green;
+		led-usb = &led_usb1_green;
+		led-usb2 = &led_usb2_green;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_dsl_green: led@28 {
+			label = "green:dsl";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_red: led@34 {
+			label = "red:power";
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_cferom_6a0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&leds {
+	status = "okay";
+
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+	brcm,serial-mux;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led>;
+
+	led_internet_green: led@1 {
+		reg = <1>;
+		active-low;
+		label = "green:internet";
+	};
+
+	led_power_green: led@8 {
+		reg = <8>;
+		label = "green:power";
+	};
+
+	led@9 {
+		reg = <9>;
+		active-low;
+		label = "green:wps";
+	};
+
+	led_usb1_green: led@10 {
+		reg = <10>;
+		active-low;
+		label = "green:usb1";
+	};
+
+	led_usb2_green: led@11 {
+		reg = <11>;
+		active-low;
+		label = "green:usb2";
+	};
+
+	led@12 {
+		reg = <12>;
+		active-low;
+		label = "amber:internet";
+	};
+
+	led_ethernet_green: led@13 {
+		reg = <13>;
+		active-low;
+		label = "green:ethernet";
+	};
+
+	led@14 {
+		reg = <14>;
+		active-low;
+		label = "amber:dsl";
+	};
+
+	led@16 {
+		reg = <16>;
+		active-low;
+		label = "amber:usb1";
+	};
+
+	led@17 {
+		reg = <17>;
+		active-low;
+		label = "amber:usb2";
+	};
+
+	led@18 {
+		reg = <18>;
+		active-low;
+		label = "amber:ethernet";
+	};
+};
+
+&nflash {
+	status = "okay";
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <15>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cferom: partition@0 {
+				label = "cferom";
+				reg = <0x0000000 0x0004000>;
+				read-only;
+			};
+
+			partition@4000 {
+				compatible = "brcm,wfi";
+				label = "wfi";
+				reg = <0x0004000 0x1c7c000>;
+			};
+
+			partition@1c80000 {
+				label = "flag";
+				reg = <0x1c80000 0x0040000>;
+				read-only;
+			};
+
+			partition@1cc0000 {
+				label = "pcbasn";
+				reg = <0x1cc0000 0x0040000>;
+				read-only;
+			};
+
+			partition@1d00000 {
+				label = "xxx";
+				reg = <0x1d00000 0x0080000>;
+				read-only;
+			};
+
+			partition@1d80000 {
+				label = "language_dev";
+				reg = <0x1d80000 0x0040000>;
+				read-only;
+			};
+
+			partition@1dc0000 {
+				label = "scnvram";
+				reg = <0x1dc0000 0x0100000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_leds: leds {
+		function = "led";
+		pins = "gpio1";
+	};
+};
+
+&switch0 {
+	ports {
+		port@4 {
+			reg = <4>;
+			label = "extsw";
+
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&cferom {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_cferom_6a0: macaddr@6a0 {
+		reg = <0x6a0 0x6>;
+	};
+};

target/linux/bmips/dts/bcm6362.dtsi

@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm6362-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h>
+#include <dt-bindings/reset/bcm6362-reset.h>
+#include <dt-bindings/soc/bcm6362-pm.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6362";
+
+	aliases {
+		nflash = &nflash;
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &lsspi;
+		spi1 = &hsspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		hsspi_osc: hsspi-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <400000000>;
+			clock-output-names = "hsspi_osc";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_clk: clock-controller@10000004 {
+			compatible = "brcm,bcm6362-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		pll_cntl: syscon@10000008 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000008 0x4>;
+			native-endian;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x0>;
+				mask = <0x1>;
+			};
+		};
+
+		periph_rst: reset-controller@10000010 {
+			compatible = "brcm,bcm6345-reset";
+			reg = <0x10000010 0x4>;
+			#reset-cells = <1>;
+		};
+
+		ext_intc: interrupt-controller@10000018 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0x10000018 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <BCM6362_IRQ_EXT0>,
+				     <BCM6362_IRQ_EXT1>,
+				     <BCM6362_IRQ_EXT2>,
+				     <BCM6362_IRQ_EXT3>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		wdt: watchdog@1000005c {
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x1000005c 0xc>;
+
+			clocks = <&periph_osc>;
+
+			timeout-sec = <30>;
+		};
+
+		gpio_cntl: syscon@10000080 {
+			compatible = "brcm,bcm6362-gpio-sysctl",
+				     "syscon", "simple-mfd";
+			reg = <0x10000080 0x80>;
+			ranges = <0 0x10000080 0x80>;
+			native-endian;
+
+			gpio: gpio@0 {
+				compatible = "brcm,bcm6362-gpio";
+				reg-names = "dirout", "dat";
+				reg = <0x0 0x8>, <0x8 0x8>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 48>;
+				#gpio-cells = <2>;
+			};
+
+			pinctrl: pinctrl@18 {
+				compatible = "brcm,bcm6362-pinctrl";
+				reg = <0x18 0x10>, <0x38 0x4>;
+
+				pinctrl_usb_device_led: usb_device_led-pins {
+					function = "usb_device_led";
+					pins = "gpio0";
+				};
+
+				pinctrl_sys_irq: sys_irq-pins {
+					function = "sys_irq";
+					pins = "gpio1";
+				};
+
+				pinctrl_serial_led: serial_led-pins {
+					pinctrl_serial_led_clk: serial_led_clk-pins {
+						function = "serial_led_clk";
+						pins = "gpio2";
+					};
+
+					pinctrl_serial_led_data: serial_led_data-pins {
+						function = "serial_led_data";
+						pins = "gpio3";
+					};
+				};
+
+				pinctrl_robosw_led_data: robosw_led_data-pins {
+					function = "robosw_led_data";
+					pins = "gpio4";
+				};
+
+				pinctrl_robosw_led_clk: robosw_led_clk-pins {
+					function = "robosw_led_clk";
+					pins = "gpio5";
+				};
+
+				pinctrl_robosw_led0: robosw_led0-pins {
+					function = "robosw_led0";
+					pins = "gpio6";
+				};
+
+				pinctrl_robosw_led1: robosw_led1-pins {
+					function = "robosw_led1";
+					pins = "gpio7";
+				};
+
+				pinctrl_inet_led: inet_led-pins {
+					function = "inet_led";
+					pins = "gpio8";
+				};
+
+				pinctrl_spi_cs2: spi_cs2-pins {
+					function = "spi_cs2";
+					pins = "gpio9";
+				};
+
+				pinctrl_spi_cs3: spi_cs3-pins {
+					function = "spi_cs3";
+					pins = "gpio10";
+				};
+
+				pinctrl_ntr_pulse: ntr_pulse-pins {
+					function = "ntr_pulse";
+					pins = "gpio11";
+				};
+
+				pinctrl_uart1_scts: uart1_scts-pins {
+					function = "uart1_scts";
+					pins = "gpio12";
+				};
+
+				pinctrl_uart1_srts: uart1_srts-pins {
+					function = "uart1_srts";
+					pins = "gpio13";
+				};
+
+				pinctrl_uart1: uart1-pins {
+					pinctrl_uart1_sdin: uart1_sdin-pins {
+						function = "uart1_sdin";
+						pins = "gpio14";
+					};
+
+					pinctrl_uart1_sdout: uart1_sdout-pins {
+						function = "uart1_sdout";
+						pins = "gpio15";
+					};
+				};
+
+				pinctrl_adsl_spi: adsl_spi-pins {
+					pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+						function = "adsl_spi_miso";
+						pins = "gpio16";
+					};
+
+					pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+						function = "adsl_spi_mosi";
+						pins = "gpio17";
+					};
+
+					pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
+						function = "adsl_spi_clk";
+						pins = "gpio18";
+					};
+
+					pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
+						function = "adsl_spi_cs";
+						pins = "gpio19";
+					};
+				};
+
+				pinctrl_ephy0_led: ephy0_led-pins {
+					function = "ephy0_led";
+					pins = "gpio20";
+				};
+
+				pinctrl_ephy1_led: ephy1_led-pins {
+					function = "ephy1_led";
+					pins = "gpio21";
+				};
+
+				pinctrl_ephy2_led: ephy2_led-pins {
+					function = "ephy2_led";
+					pins = "gpio22";
+				};
+
+				pinctrl_ephy3_led: ephy3_led-pins {
+					function = "ephy3_led";
+					pins = "gpio23";
+				};
+
+				pinctrl_ext_irq0: ext_irq0-pins {
+					function = "ext_irq0";
+					pins = "gpio24";
+				};
+
+				pinctrl_ext_irq1: ext_irq1-pins {
+					function = "ext_irq1";
+					pins = "gpio25";
+				};
+
+				pinctrl_ext_irq2: ext_irq2-pins {
+					function = "ext_irq2";
+					pins = "gpio26";
+				};
+
+				pinctrl_ext_irq3: ext_irq3-pins {
+					function = "ext_irq3";
+					pins = "gpio27";
+				};
+
+				pinctrl_nand: nand-pins {
+					function = "nand";
+					group = "nand_grp";
+				};
+			};
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_UART0>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_UART1>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		nflash: nand@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v2.2",
+				     "brcm,brcmnand";
+			reg = <0x10000200 0x180>,
+			      <0x10000600 0x200>,
+			      <0x10000070 0x10>;
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_NAND>;
+
+			clocks = <&periph_clk BCM6362_CLK_NAND>;
+			clock-names = "nand";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+
+			status = "disabled";
+		};
+
+		lsspi: spi@10000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-spi";
+			reg = <0x10000800 0x70c>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_LSSPI>;
+
+			clocks = <&periph_clk BCM6362_CLK_SPI>;
+			clock-names = "spi";
+
+			resets = <&periph_rst BCM6362_RST_SPI>;
+
+			status = "disabled";
+		};
+
+		hsspi: spi@10001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-hsspi";
+			reg = <0x10001000 0x600>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_HSSPI>;
+
+			clocks = <&periph_clk BCM6362_CLK_HSSPI>,
+				 <&hsspi_osc>;
+			clock-names = "hsspi",
+				      "pll";
+
+			resets = <&periph_rst BCM6362_RST_SPI>;
+
+			status = "disabled";
+		};
+
+		serdes_cntl: syscon@10001804 {
+			compatible = "syscon";
+			reg = <0x10001804 0x4>;
+			native-endian;
+		};
+
+		periph_pwr: power-controller@10001848 {
+			compatible = "brcm,bcm6362-power-controller";
+			reg = <0x10001848 0x4>;
+			#power-domain-cells = <1>;
+		};
+
+		leds: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6362-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+			spurious-oc;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_EHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6362-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_OHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10002700 {
+			compatible = "brcm,bcm6362-usbh-phy";
+			reg = <0x10002700 0x38>;
+
+			#phy-cells = <1>;
+
+			clocks = <&periph_clk BCM6362_CLK_USBH>;
+			clock-names = "usbh";
+
+			power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_USBH>;
+			resets = <&periph_rst BCM6362_RST_USBH>;
+
+			status = "disabled";
+		};
+
+		ethernet: ethernet@1000d800 {
+			compatible = "brcm,bcm6362-enetsw";
+			reg = <0x1000d800 0x80>,
+			      <0x1000da00 0x80>,
+			      <0x1000dc00 0x80>;
+			reg-names = "dma",
+				    "dma-channels",
+				    "dma-sram";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_ENETSW_RX_DMA0>;
+			interrupt-names = "rx";
+
+			clocks = <&periph_clk BCM6362_CLK_SWPKT_USB>,
+				 <&periph_clk BCM6362_CLK_SWPKT_SAR>,
+				 <&periph_clk BCM6362_CLK_ROBOSW>;
+
+			resets = <&periph_rst BCM6362_RST_ENETSW>,
+				 <&periph_rst BCM6362_RST_EPHY>;
+
+			power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_ROBOSW>,
+					<&periph_pwr BCM6362_POWER_DOMAIN_GMII_PADS>;
+
+			dma-rx = <0>;
+			dma-tx = <1>;
+
+			status = "disabled";
+		};
+
+		switch0: switch@10e00000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-switch";
+			reg = <0x10e00000 0x8000>;
+			big-endian;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+
+					phy-mode = "internal";
+					ethernet = <&ethernet>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+		mdio: mdio@10e000b0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6368-mdio-mux";
+			reg = <0x10e000b0 0x8>;
+
+			mdio_int: mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <4>;
+				};
+			};
+
+			mdio_ext: mdio@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+		};
+
+		pcie: pcie@10e40000 {
+			compatible = "brcm,bcm6328-pcie";
+			reg = <0x10e40000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+			bus-range = <0x00 0x01>;
+			ranges = <0x2000000 0 0x10f00000 0x10f00000 0 0x100000>;
+			linux,pci-probe-only = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6362_IRQ_PCIE_RC>;
+
+			clocks = <&periph_clk BCM6362_CLK_PCIE>;
+			clock-names = "pcie";
+
+			resets = <&periph_rst BCM6362_RST_PCIE>,
+				 <&periph_rst BCM6362_RST_PCIE_EXT>,
+				 <&periph_rst BCM6362_RST_PCIE_CORE>;
+			reset-names = "pcie",
+				      "pcie-ext",
+				      "pcie-core";
+
+			power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_PCIE>;
+
+			brcm,serdes = <&serdes_cntl>;
+
+			status = "disabled";
+		};
+	};
+};

target/linux/bmips/dts/bcm6368-comtrend-vr-3025u.dts

@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6368.dtsi"
+
+/ {
+	model = "Comtrend VR-3025u";
+	compatible = "comtrend,vr-3025u", "brcm,bcm6368";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+
+		led-dsl = &led_dsl_green;
+		led-internet = &led_internet_green;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_dsl_green: led@2 {
+			label = "green:dsl";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led_internet_green: led@5 {
+			label = "green:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_power_green: led@22 {
+			label = "green:power";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_power_red: led@24 {
+			label = "red:power";
+			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		led@31 {
+			label = "red:internet";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	bcm43222-sprom {
+		compatible = "brcm,bcm43222-sprom";
+
+		pci-bus = <0>;
+		pci-dev = <1>;
+
+		nvmem-cells = <&macaddr_cfe_6a0>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <1>;
+
+		brcm,sprom-fixups = <97 0xfeb3>,
+				    <98 0x1618>,
+				    <99 0xfab0>,
+				    <113 0xfed1>,
+				    <114 0x1609>,
+				    <115 0xfad9>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_cfe_6a0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pci {
+	status = "okay";
+};
+
+&pflash {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe: partition@0 {
+			label = "CFE";
+			reg = <0x0000000 0x0020000>;
+			read-only;
+		};
+
+		partition@20000 {
+			compatible = "brcm,bcm963xx-imagetag";
+			label = "firmware";
+			reg = <0x0020000 0x1fc0000>;
+		};
+
+		partition@1fe0000 {
+			label = "nvram";
+			reg = <0x1fe0000 0x020000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ephy0_led &pinctrl_ephy1_led
+		     &pinctrl_ephy2_led &pinctrl_ephy3_led>;
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+
+			phy-handle = <&phy1>;
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+
+			phy-handle = <&phy2>;
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+
+			phy-handle = <&phy3>;
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+
+			phy-handle = <&phy4>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&cfe {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_cfe_6a0: macaddr@6a0 {
+		reg = <0x6a0 0x6>;
+	};
+};

target/linux/bmips/dts/bcm6368.dtsi

@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm6368-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h>
+#include <dt-bindings/reset/bcm6368-reset.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6368";
+
+	aliases {
+		nflash = &nflash;
+		pflash = &pflash;
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &lsspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+
+			#clock-cells = <0>;
+
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_clk: clock-controller@10000004 {
+			compatible = "brcm,bcm6368-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		pll_cntl: syscon@10000008 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000008 0x4>;
+			native-endian;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x0>;
+				mask = <0x1>;
+			};
+		};
+
+		periph_rst: reset-controller@10000010 {
+			compatible = "brcm,bcm6345-reset";
+			reg = <0x10000010 0x4>;
+			#reset-cells = <1>;
+		};
+
+		ext_intc0: interrupt-controller@10000018 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0x10000018 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <BCM6368_IRQ_EXT0>,
+				     <BCM6368_IRQ_EXT1>,
+				     <BCM6368_IRQ_EXT2>,
+				     <BCM6368_IRQ_EXT3>;
+		};
+
+		ext_intc1: interrupt-controller@1000001c {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0x1000001c 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <BCM6368_IRQ_EXT4>,
+				     <BCM6368_IRQ_EXT5>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			#address-cells = <1>;
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		wdt: watchdog@1000005c {
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x1000005c 0xc>;
+
+			clocks = <&periph_osc>;
+
+			timeout-sec = <30>;
+		};
+
+		gpio_cntl: syscon@10000080 {
+			compatible = "brcm,bcm6368-gpio-sysctl",
+				     "syscon", "simple-mfd";
+			reg = <0x10000080 0x80>;
+			ranges = <0 0x10000080 0x80>;
+			native-endian;
+
+			gpio: gpio@0 {
+				compatible = "brcm,bcm6368-gpio";
+				reg-names = "dirout", "dat";
+				reg = <0x0 0x8>, <0x8 0x8>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 38>;
+				#gpio-cells = <2>;
+			};
+
+			pinctrl: pinctrl@18 {
+				compatible = "brcm,bcm6368-pinctrl";
+				reg = <0x18 0x4>, <0x38 0x4>;
+
+				pinctrl_analog_afe_0: analog_afe_0-pins {
+					function = "analog_afe_0";
+					pins = "gpio0";
+				};
+
+				pinctrl_analog_afe_1: analog_afe_1-pins {
+					function = "analog_afe_1";
+					pins = "gpio1";
+				};
+
+				pinctrl_sys_irq: sys_irq-pins {
+					function = "sys_irq";
+					pins = "gpio2";
+				};
+
+				pinctrl_serial_led: serial_led-pins {
+					pinctrl_serial_led_data: serial_led_data-pins {
+						function = "serial_led_data";
+						pins = "gpio3";
+					};
+
+					pinctrl_serial_led_clk: serial_led_clk-pins {
+						function = "serial_led_clk";
+						pins = "gpio4";
+					};
+				};
+
+				pinctrl_inet_led: inet_led-pins {
+					function = "inet_led";
+					pins = "gpio5";
+				};
+
+				pinctrl_ephy0_led: ephy0_led-pins {
+					function = "ephy0_led";
+					pins = "gpio6";
+				};
+
+				pinctrl_ephy1_led: ephy1_led-pins {
+					function = "ephy1_led";
+					pins = "gpio7";
+				};
+
+				pinctrl_ephy2_led: ephy2_led-pins {
+					function = "ephy2_led";
+					pins = "gpio8";
+				};
+
+				pinctrl_ephy3_led: ephy3_led-pins {
+					function = "ephy3_led";
+					pins = "gpio9";
+				};
+
+				pinctrl_robosw_led_data: robosw_led_data-pins {
+					function = "robosw_led_data";
+					pins = "gpio10";
+				};
+
+				pinctrl_robosw_led_clk: robosw_led_clk-pins {
+					function = "robosw_led_clk";
+					pins = "gpio11";
+				};
+
+				pinctrl_robosw_led0: robosw_led0-pins {
+					function = "robosw_led0";
+					pins = "gpio12";
+				};
+
+				pinctrl_robosw_led1: robosw_led1-pins {
+					function = "robosw_led1";
+					pins = "gpio13";
+				};
+
+				pinctrl_usb_device_led: usb_device_led-pins {
+					function = "usb_device_led";
+					pins = "gpio14";
+				};
+
+				pinctrl_pci: pci-pins {
+					pinctrl_pci_req1: pci_req1-pins {
+						function = "pci_req1";
+						pins = "gpio16";
+					};
+
+					pinctrl_pci_gnt1: pci_gnt1-pins {
+						function = "pci_gnt1";
+						pins = "gpio17";
+					};
+
+					pinctrl_pci_intb: pci_intb-pins {
+						function = "pci_intb";
+						pins = "gpio18";
+					};
+
+					pinctrl_pci_req0: pci_req0-pins {
+						function = "pci_req0";
+						pins = "gpio19";
+					};
+
+					pinctrl_pci_gnt0: pci_gnt0-pins {
+						function = "pci_gnt0";
+						pins = "gpio20";
+					};
+				};
+
+				pinctrl_pcmcia: pcmcia-pins {
+					pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
+						function = "pcmcia_cd1";
+						pins = "gpio22";
+					};
+
+					pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
+						function = "pcmcia_cd2";
+						pins = "gpio23";
+					};
+
+					pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
+						function = "pcmcia_vs1";
+						pins = "gpio24";
+					};
+
+					pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
+						function = "pcmcia_vs2";
+						pins = "gpio25";
+					};
+				};
+
+				pinctrl_ebi_cs2: ebi_cs2-pins {
+					function = "ebi_cs2";
+					pins = "gpio26";
+				};
+
+				pinctrl_ebi_cs3: ebi_cs3-pins {
+					function = "ebi_cs3";
+					pins = "gpio27";
+				};
+
+				pinctrl_spi_cs2: spi_cs2-pins {
+					function = "spi_cs2";
+					pins = "gpio28";
+				};
+
+				pinctrl_spi_cs3: spi_cs3-pins {
+					function = "spi_cs3";
+					pins = "gpio29";
+				};
+
+				pinctrl_spi_cs4: spi_cs4-pins {
+					function = "spi_cs4";
+					pins = "gpio30";
+				};
+
+				pinctrl_spi_cs5: spi_cs5-pins {
+					function = "spi_cs5";
+					pins = "gpio31";
+				};
+
+				pinctrl_uart1: uart1-pins {
+					function = "uart1";
+					group = "uart1_grp";
+				};
+			};
+		};
+
+		leds: led-controller@100000d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0x100000d0 0x8>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6368_IRQ_UART0>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6368_IRQ_UART1>;
+
+			clocks = <&periph_osc>;
+			clock-names = "periph";
+
+			status = "disabled";
+		};
+
+		nflash: nand@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v2.1",
+				     "brcm,brcmnand";
+			reg = <0x10000200 0x180>,
+			      <0x10000600 0x200>,
+			      <0x10000070 0x10>;
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6368_IRQ_NAND>;
+
+			clocks = <&periph_clk BCM6368_CLK_NAND>;
+			clock-names = "nand";
+
+			status = "disabled";
+		};
+
+		lsspi: spi@10000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-spi";
+			reg = <0x10000800 0x70c>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6368_IRQ_SPI>;
+
+			clocks = <&periph_clk BCM6368_CLK_SPI>;
+			clock-names = "spi";
+
+			resets = <&periph_rst BCM6368_RST_SPI>;
+
+			status = "disabled";
+		};
+
+		pci: pci@10001000 {
+			compatible = "brcm,bcm6348-pci";
+			reg = <0x10001000 0x200>,
+			      <0x08000000 0x10000>;
+			reg-names = "pci",
+				    "pci-io";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+			bus-range = <0x00 0x01>;
+			ranges = <0x2000000 0 0x30000000 0x30000000 0 0x8000000>;
+			linux,pci-probe-only = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6368_IRQ_MPI>;
+
+			resets = <&periph_rst BCM6368_RST_MPI>;
+			reset-names = "pci";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pci>;
+
+			brcm,remap;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10001500 {
+			compatible = "brcm,bcm6368-ehci", "generic-ehci";
+			reg = <0x10001500 0x100>;
+			big-endian;
+			spurious-oc;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6368_IRQ_EHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci: usb@10001600 {
+			compatible = "brcm,bcm6368-ohci", "generic-ohci";
+			reg = <0x10001600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6368_IRQ_OHCI>;
+
+			phys = <&usbh 0>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10001700 {
+			compatible = "brcm,bcm6368-usbh-phy";
+			reg = <0x10001700 0x38>;
+
+			#phy-cells = <1>;
+
+			clocks = <&periph_clk BCM6368_CLK_USBH>;
+			clock-names = "usbh";
+
+			resets = <&periph_rst BCM6368_RST_USBH>;
+
+			status = "disabled";
+		};
+
+		random: rng@10004180 {
+			compatible = "brcm,bcm6368-rng";
+			reg = <0x10004180 0x14>;
+
+			clocks = <&periph_clk BCM6368_CLK_IPSEC>;
+			clock-names = "ipsec";
+
+			resets = <&periph_rst BCM6368_RST_IPSEC>;
+		};
+
+		ethernet: ethernet@10006800 {
+			compatible = "brcm,bcm6368-enetsw";
+			reg = <0x10006800 0x80>,
+			      <0x10006a00 0x80>,
+			      <0x10006c00 0x80>;
+			reg-names = "dma",
+				    "dma-channels",
+				    "dma-sram";
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <BCM6368_IRQ_ENETSW_RX_DMA0>,
+				     <BCM6368_IRQ_ENETSW_TX_DMA0>;
+			interrupt-names = "rx",
+					  "tx";
+
+			clocks = <&periph_clk BCM6368_CLK_SWPKT_USB>,
+				 <&periph_clk BCM6368_CLK_SWPKT_SAR>,
+				 <&periph_clk BCM6368_CLK_ROBOSW>;
+
+			resets = <&periph_rst BCM6368_RST_SWITCH>,
+				 <&periph_rst BCM6368_RST_EPHY>;
+
+			dma-rx = <0>;
+			dma-tx = <1>;
+
+			status = "disabled";
+		};
+
+		switch0: switch@10f00000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-switch";
+			reg = <0x10f00000 0x8000>;
+			big-endian;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+
+					phy-mode = "internal";
+					ethernet = <&ethernet>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+		mdio: mdio@10f000b0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6368-mdio-mux";
+			reg = <0x10f000b0 0x8>;
+
+			mdio_int: mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <4>;
+				};
+			};
+
+			mdio_ext: mdio@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+		};
+	};
+
+	pflash: nor@18000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x18000000 0x2000000>;
+		bank-width = <2>;
+
+		status = "disabled";
+	};
+};