Initial commit

target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts

@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6358.dtsi"
+
+/ {
+	compatible = "huawei,hg556a-b", "brcm,bcm6358";
+	model = "Huawei EchoLife HG556a (version B)";
+
+	aliases {
+		led-boot = &led_power_red;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_red;
+		led-upgrade = &led_power_red;
+
+		led-dsl = &led_dsl_red;
+		led-usb = &led_hspa_red;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		help {
+			label = "help";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HELP>;
+			debounce-interval = <60>;
+		};
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		restart {
+			label = "restart";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CONFIG>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "red:message";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_hspa_red: led@1 {
+			label = "red:hspa";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led_dsl_red: led@2 {
+			label = "red:dsl";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_red: led@3 {
+			label = "red:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led@6 {
+			label = "all";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led@12 {
+			label = "green:lan1";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led@13 {
+			label = "red:lan1";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led@15 {
+			label = "green:lan2";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led@22 {
+			label = "red:lan2";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led@23 {
+			label = "green:lan3";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led@26 {
+			label = "red:lan3";
+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led@27 {
+			label = "green:lan4";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led@28 {
+			label = "red:lan4";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ath9k-fixup {
+		compatible = "brcm,ath9k-fixup";
+		reg = <0x30000000 0x8000000>;
+
+		pci-dev = <1>;
+
+		nvmem-cells = <&macaddr_cfe_6a0>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <1>;
+
+		ath,eeprom = <&cal_data 0x1e000>;
+		ath,endian-check;
+		ath,led-pin = <2>;
+		ath,led-active-high;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pci {
+	status = "okay";
+};
+
+&pflash {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe: partition@0 {
+			label = "cfe";
+			reg = <0x000000 0x020000>;
+			read-only;
+		};
+
+		partition@20000 {
+			label = "firmware";
+			reg = <0x020000 0xec0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		cal_data: partition@ee0000 {
+			label = "cal_data";
+			reg = <0xee0000 0x100000>;
+			read-only;
+		};
+
+		partition@fe0000 {
+			label = "nvram";
+			reg = <0xfe0000 0x020000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&cfe {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_cfe_6a0: macaddr@6a0 {
+		reg = <0x6a0 0x6>;
+	};
+};