Initial commit
This commit is contained in:
domenico
@@ -0,0 +1,36 @@
|
||||
. /lib/functions.sh
|
||||
|
||||
preinit_set_mac_address() {
|
||||
case $(board_name) in
|
||||
asus,map-ac2200)
|
||||
base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
|
||||
ip link set dev eth0 address $(macaddr_add "$base_mac" 1)
|
||||
ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
|
||||
;;
|
||||
ezviz,cs-w3-wd1200g-eup)
|
||||
ip link set dev eth0 address $(mtd_get_mac_binary "ART" 0x6)
|
||||
ip link set dev eth1 address $(mtd_get_mac_binary "ART" 0x0)
|
||||
;;
|
||||
engenius,eap2200)
|
||||
base_mac=$(cat /sys/class/net/eth0/address)
|
||||
ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
|
||||
;;
|
||||
linksys,ea8300|\
|
||||
linksys,mr8300)
|
||||
base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
||||
ip link set dev eth0 address "$base_mac"
|
||||
ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
|
||||
;;
|
||||
meraki,mr33)
|
||||
mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
|
||||
[ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan"
|
||||
;;
|
||||
zyxel,nbg6617)
|
||||
base_mac=$(cat /sys/class/net/eth0/address)
|
||||
ip link set dev eth0 address $(macaddr_add "$base_mac" 2)
|
||||
ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
boot_hook_add preinit_main preinit_set_mac_address
|
||||
@@ -0,0 +1,22 @@
|
||||
set_preinit_iface() {
|
||||
. /lib/functions.sh
|
||||
|
||||
case $(board_name) in
|
||||
aruba,ap-303| \
|
||||
asus,rt-ac58u| \
|
||||
avm,fritzbox-4040| \
|
||||
ezviz,cs-w3-wd1200g-eup| \
|
||||
glinet,gl-b1300| \
|
||||
linksys,ea8300| \
|
||||
linksys,mr8300| \
|
||||
meraki,mr33| \
|
||||
zyxel,nbg6617)
|
||||
ifname=eth0
|
||||
;;
|
||||
devolo,magic-2-wifi-next)
|
||||
ifname=eth1
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
boot_hook_add preinit_main set_preinit_iface
|
||||
108
target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh
Normal file
108
target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh
Normal file
@@ -0,0 +1,108 @@
|
||||
# The U-Boot loader with the datachk patchset for dualbooting requires image
|
||||
# sizes and checksums to be provided in the U-Boot environment.
|
||||
# The devices come with 2 main partitions - while one is active
|
||||
# sysupgrade will flash the other. The boot order is changed to boot the
|
||||
# newly flashed partition. If the new partition can't be booted due to
|
||||
# upgrade failures the previously used partition is loaded.
|
||||
|
||||
platform_do_upgrade_dualboot_datachk() {
|
||||
local tar_file="$1"
|
||||
local restore_backup
|
||||
local primary_kernel_mtd
|
||||
|
||||
local setenv_script="/tmp/fw_env_upgrade"
|
||||
|
||||
local kernel_mtd="$(find_mtd_index $PART_NAME)"
|
||||
local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
|
||||
local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
|
||||
|
||||
# detect to which flash region the new image is written to.
|
||||
#
|
||||
# 1. check what is the mtd index for the first flash region on this
|
||||
# device
|
||||
# 2. check if the target partition ("inactive") has the mtd index of
|
||||
# the first flash region
|
||||
#
|
||||
# - when it is: the new bootseq will be 1,2 and the first region is
|
||||
# modified
|
||||
# - when it isnt: bootseq will be 2,1 and the second region is
|
||||
# modified
|
||||
#
|
||||
# The detection has to be done via the hardcoded mtd partition because
|
||||
# the current boot might be done with the fallback region. Let us
|
||||
# assume that the current bootseq is 1,2. The bootloader detected that
|
||||
# the image in flash region 1 is corrupt and thus switches to flash
|
||||
# region 2. The bootseq in the u-boot-env is now still the same and
|
||||
# the sysupgrade code can now only rely on the actual mtd indexes and
|
||||
# not the bootseq variable to detect the currently booted flash
|
||||
# region/image.
|
||||
#
|
||||
# In the above example, an implementation which uses bootseq ("1,2") to
|
||||
# detect the currently booted image would assume that region 1 is booted
|
||||
# and then overwrite the variables for the wrong flash region (aka the
|
||||
# one which isn't modified). This could result in a device which doesn't
|
||||
# boot anymore to Linux until it was reflashed with ap51-flash.
|
||||
local next_boot_part="1"
|
||||
case "$(board_name)" in
|
||||
plasmacloud,pa1200|\
|
||||
openmesh,a42)
|
||||
primary_kernel_mtd=8
|
||||
;;
|
||||
plasmacloud,pa2200|\
|
||||
openmesh,a62)
|
||||
primary_kernel_mtd=10
|
||||
;;
|
||||
*)
|
||||
echo "failed to detect primary kernel mtd partition for board"
|
||||
return 1
|
||||
;;
|
||||
esac
|
||||
[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
|
||||
|
||||
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
|
||||
local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
|
||||
# rootfs without EOF marker
|
||||
rootfs_length=$((rootfs_length-4))
|
||||
|
||||
local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
|
||||
# md5 checksum of rootfs with EOF marker
|
||||
local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
|
||||
|
||||
#
|
||||
# add tar support to get_image() to use default_do_upgrade() instead?
|
||||
#
|
||||
|
||||
# take care of restoring a saved config
|
||||
[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
|
||||
|
||||
mtd -q erase inactive
|
||||
tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
|
||||
tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
|
||||
|
||||
# prepare new u-boot env
|
||||
if [ "$next_boot_part" = "1" ]; then
|
||||
echo "bootseq 1,2" > $setenv_script
|
||||
else
|
||||
echo "bootseq 2,1" > $setenv_script
|
||||
fi
|
||||
|
||||
printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
|
||||
printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
|
||||
printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
|
||||
printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
|
||||
|
||||
printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
|
||||
printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
|
||||
printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
|
||||
printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
|
||||
|
||||
# store u-boot env changes
|
||||
mkdir -p /var/lock
|
||||
fw_setenv -s $setenv_script || {
|
||||
echo "failed to update U-Boot environment"
|
||||
return 1
|
||||
}
|
||||
}
|
||||
122
target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
Executable file
122
target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
Executable file
@@ -0,0 +1,122 @@
|
||||
linksys_get_target_firmware() {
|
||||
local cur_boot_part mtd_ubi0
|
||||
|
||||
cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
|
||||
if [ -z "${cur_boot_part}" ]; then
|
||||
mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
|
||||
case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
|
||||
kernel|rootfs)
|
||||
cur_boot_part=1
|
||||
;;
|
||||
alt_kernel|alt_rootfs)
|
||||
cur_boot_part=2
|
||||
;;
|
||||
esac
|
||||
>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
|
||||
"${cur_boot_part}" "${mtd_ubi0}"
|
||||
fi
|
||||
|
||||
# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
|
||||
# if test $auto_recovery = no;
|
||||
# then bootipq;
|
||||
# elif test $boot_part = 1;
|
||||
# then run bootpart1;
|
||||
# else run bootpart2;
|
||||
# fi
|
||||
|
||||
case "$cur_boot_part" in
|
||||
1)
|
||||
fw_setenv -s - <<-EOF
|
||||
boot_part 2
|
||||
auto_recovery yes
|
||||
EOF
|
||||
printf "alt_kernel"
|
||||
return
|
||||
;;
|
||||
2)
|
||||
fw_setenv -s - <<-EOF
|
||||
boot_part 1
|
||||
auto_recovery yes
|
||||
EOF
|
||||
printf "kernel"
|
||||
return
|
||||
;;
|
||||
*)
|
||||
return
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
linksys_get_root_magic() {
|
||||
(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
|
||||
}
|
||||
|
||||
platform_do_upgrade_linksys() {
|
||||
local magic_long="$(get_magic_long "$1")"
|
||||
|
||||
local rm_oem_fw_vols="squashfs ubifs" # from OEM [alt_]rootfs UBI
|
||||
local vol
|
||||
|
||||
mkdir -p /var/lock
|
||||
local part_label="$(linksys_get_target_firmware)"
|
||||
touch /var/lock/fw_printenv.lock
|
||||
|
||||
if [ -z "$part_label" ]; then
|
||||
echo "cannot find target partition"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
local target_mtd=$(find_mtd_part "$part_label")
|
||||
|
||||
[ "$magic_long" = "73797375" ] && {
|
||||
CI_KERNPART="$part_label"
|
||||
if [ "$part_label" = "kernel" ]; then
|
||||
CI_UBIPART="rootfs"
|
||||
else
|
||||
CI_UBIPART="alt_rootfs"
|
||||
fi
|
||||
|
||||
local mtdnum="$(find_mtd_index "$CI_UBIPART")"
|
||||
if [ ! "$mtdnum" ]; then
|
||||
echo "cannot find ubi mtd partition $CI_UBIPART"
|
||||
return 1
|
||||
fi
|
||||
|
||||
local ubidev="$(nand_find_ubi "$CI_UBIPART")"
|
||||
if [ ! "$ubidev" ]; then
|
||||
ubiattach -m "$mtdnum"
|
||||
sync
|
||||
ubidev="$(nand_find_ubi "$CI_UBIPART")"
|
||||
fi
|
||||
|
||||
if [ "$ubidev" ]; then
|
||||
for vol in $rm_oem_fw_vols; do
|
||||
ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
|
||||
done
|
||||
fi
|
||||
|
||||
# complete std upgrade
|
||||
nand_upgrade_tar "$1"
|
||||
}
|
||||
|
||||
[ "$magic_long" = "27051956" ] && {
|
||||
# This magic is for a uImage (which is a sysupgrade image)
|
||||
# check firmwares' rootfs types
|
||||
local oldroot="$(linksys_get_root_magic "$target_mtd")"
|
||||
local newroot="$(linksys_get_root_magic "$1")"
|
||||
|
||||
if [ "$newroot" = "55424923" ] && [ "$oldroot" = "55424923" ]; then
|
||||
# we're upgrading from a firmware with UBI to one with UBI
|
||||
# erase everything to be safe
|
||||
# - Is that really needed? Won't remove (or comment) the if,
|
||||
# because it may be needed in a future device.
|
||||
#mtd erase $part_label
|
||||
#get_image "$1" | mtd -n write - $part_label
|
||||
echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
|
||||
get_image "$1" | mtd write - "$part_label"
|
||||
else
|
||||
echo "writing \"$1\" image to \"$part_label\""
|
||||
get_image "$1" | mtd write - "$part_label"
|
||||
fi
|
||||
}
|
||||
}
|
||||
134
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
Normal file
134
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
Normal file
@@ -0,0 +1,134 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
||||
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||
|
||||
platform_check_image() {
|
||||
case "$(board_name)" in
|
||||
asus,rt-ac58u)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
local ubidev=$(nand_find_ubi $CI_UBIPART)
|
||||
local asus_root=$(nand_find_volume $ubidev jffs2)
|
||||
|
||||
[ -n "$asus_root" ] || return 0
|
||||
|
||||
cat << EOF
|
||||
jffs2 partition is still present.
|
||||
There's probably no space left
|
||||
to install the filesystem.
|
||||
|
||||
You need to delete the jffs2 partition first:
|
||||
# ubirmvol /dev/ubi0 --name=jffs2
|
||||
|
||||
Once this is done. Retry.
|
||||
EOF
|
||||
return 1
|
||||
;;
|
||||
esac
|
||||
return 0;
|
||||
}
|
||||
|
||||
askey_do_upgrade() {
|
||||
local tar_file="$1"
|
||||
|
||||
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
|
||||
|
||||
nand_do_upgrade "$1"
|
||||
}
|
||||
|
||||
zyxel_do_upgrade() {
|
||||
local tar_file="$1"
|
||||
|
||||
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
|
||||
|
||||
if [ -n "$UPGRADE_BACKUP" ]; then
|
||||
tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
|
||||
else
|
||||
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
|
||||
fi
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
8dev,jalapeno |\
|
||||
aruba,ap-303 |\
|
||||
aruba,ap-303h |\
|
||||
aruba,ap-365 |\
|
||||
avm,fritzbox-7530 |\
|
||||
avm,fritzrepeater-1200 |\
|
||||
avm,fritzrepeater-3000 |\
|
||||
buffalo,wtr-m2133hp |\
|
||||
cilab,meshpoint-one |\
|
||||
edgecore,ecw5211 |\
|
||||
edgecore,oap100 |\
|
||||
engenius,eap2200 |\
|
||||
glinet,gl-ap1300 |\
|
||||
luma,wrtq-329acn |\
|
||||
mobipromo,cm520-79f |\
|
||||
netgear,wac510 |\
|
||||
qxwlan,e2600ac-c2)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
alfa-network,ap120c-ac)
|
||||
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
||||
if [ "$part" = "rootfs1" ]; then
|
||||
fw_setenv active 2 || exit 1
|
||||
CI_UBIPART="rootfs2"
|
||||
else
|
||||
fw_setenv active 1 || exit 1
|
||||
CI_UBIPART="rootfs1"
|
||||
fi
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
asus,map-ac2200)
|
||||
CI_KERNPART="linux"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
asus,rt-ac58u)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
CI_KERNPART="linux"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
cellc,rtl30vw)
|
||||
CI_UBIPART="ubifs"
|
||||
askey_do_upgrade "$1"
|
||||
;;
|
||||
compex,wpj419)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
linksys,ea6350v3 |\
|
||||
linksys,ea8300 |\
|
||||
linksys,mr8300)
|
||||
platform_do_upgrade_linksys "$1"
|
||||
;;
|
||||
meraki,mr33)
|
||||
CI_KERNPART="part.safe"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
mikrotik,hap-ac2|\
|
||||
mikrotik,sxtsq-5-ac)
|
||||
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
openmesh,a42 |\
|
||||
openmesh,a62 |\
|
||||
plasmacloud,pa1200 |\
|
||||
plasmacloud,pa2200)
|
||||
PART_NAME="inactive"
|
||||
platform_do_upgrade_dualboot_datachk "$1"
|
||||
;;
|
||||
zyxel,nbg6617)
|
||||
zyxel_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
Reference in New Issue
Block a user