Initial commit

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts

@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "AVM FRITZ!Box 4040";
+	compatible = "avm,fritzbox-4040";
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &flash;
+		led-running = &power;
+		led-upgrade = &flash;
+		label-mac-device = &gmac0;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2@60f8800 {
+			status = "okay";
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wlan {
+			label = "wlan";
+			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	switch-leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "green:wlan";
+			gpios = <&ethphy0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		panic: info_red {
+			label = "red:info";
+			gpios = <&ethphy0 1 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		wan {
+			label = "green:wan";
+			gpios = <&ethphy1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "green:power";
+			gpios = <&ethphy2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan {
+			label = "green:lan";
+			gpios = <&ethphy3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		flash: info_amber {
+			label = "amber:info";
+			gpios = <&ethphy3 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		mux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		status = "okay";
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition0@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition1@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition2@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition3@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition4@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition5@e0000 {
+				label = "APPSBLENV"; /* uboot env - empty */
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition6@f0000 {
+				label = "urlader"; /* APPSBL */
+				reg = <0x000f0000 0x0002dc000>;
+				read-only;
+			};
+			partition7@11dc00 {
+				/* make a backup of this partition! */
+				label = "urlader_config";
+				reg = <0x0011dc00 0x00002400>;
+				read-only;
+			};
+			partition8@120000 {
+				label = "tffs1";
+				reg = <0x00120000 0x00080000>;
+				read-only;
+			};
+			partition9@1a0000 {
+				label = "tffs2";
+				reg = <0x001a0000 0x00080000>;
+				read-only;
+			};
+			partition10@220000 {
+				label = "uboot";
+				reg = <0x00220000 0x00080000>;
+				read-only;
+			};
+			partition11@2A0000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x002a0000 0x01c60000>;
+			};
+			partition12@1f00000 {
+				label = "jffs2";
+				reg = <0x01f00000 0x00100000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ethphy0 {
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
+&ethphy1 {
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	enable-usb-power {
+		gpio-hog;
+		line-name = "enable USB3 power";
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&ethphy2 {
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
+&ethphy3 {
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
+};