Initial commit

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts

@@ -0,0 +1,163 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8064/DB149";
+	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
+
+	aliases {
+		serial0 = &gsbi2_serial;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&qcom_pinmux {
+	rgmii0_pins: rgmii0_pins {
+		mux {
+			pins = "gpio2", "gpio66";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&gsbi2 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	gsbi2_serial: serial@12490000 {
+		status = "okay";
+	};
+};
+
+&gsbi4 {
+	status = "disabled";
+};
+
+&gsbi4_serial {
+	status = "disabled";
+};
+
+&flash {
+	m25p,fast-read;
+
+	partition@0 {
+		label = "lowlevel_init";
+		reg = <0x0 0x1b0000>;
+	};
+
+	partition@1 {
+		label = "u-boot";
+		reg = <0x1b0000 0x80000>;
+	};
+
+	partition@2 {
+		label = "u-boot-env";
+		reg = <0x230000 0x40000>;
+	};
+
+	partition@3 {
+		label = "caldata";
+		reg = <0x270000 0x40000>;
+	};
+
+	partition@4 {
+		label = "firmware";
+		reg = <0x2b0000 0x1d50000>;
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+		>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	phy6: ethernet-phy@6 {
+		reg = <6>;
+	};
+
+	phy7: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+	phy-handle = <&phy4>;
+
+	pinctrl-0 = <&rgmii0_pins>;
+	pinctrl-names = "default";
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <1>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+	phy-handle = <&phy6>;
+};
+
+&gmac3 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <3>;
+	phy-handle = <&phy7>;
+};