Initial commit

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts

@@ -0,0 +1,128 @@
+#include "qcom-ipq8064-eax500.dtsi"
+
+/ {
+	model = "Linksys EA8500 WiFi Router";
+	compatible = "linksys,ea8500", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "green:wps";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_power: power {
+			label = "white:power";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "green:wifi";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio65", "gpio67", "gpio68";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio6", "gpio53", "gpio54";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&partitions {
+	partition@5f80000 {
+		label = "syscfg";
+		reg = <0x5f80000 0x2080000>;
+	};
+};
+
+&mdio0 {
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <1>;
+	qcom,rgmii_delay = <0>;
+	qcom,emulation = <0>;
+};
+
+/* LAN */
+&gmac2 {
+	qcom,phy_mdio_addr = <0>;	/* none */
+	qcom,poll_required = <0>;	/* no polling */
+	qcom,rgmii_delay = <0>;
+	qcom,emulation = <0>;
+};