Initial commit
This commit is contained in:
domenico
@@ -0,0 +1,10 @@
|
||||
--- a/arch/powerpc/platforms/85xx/common.c
|
||||
+++ b/arch/powerpc/platforms/85xx/common.c
|
||||
@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx
|
||||
{ .compatible = "fsl,mpc8548-guts", },
|
||||
/* Probably unnecessary? */
|
||||
{ .compatible = "gpio-leds", },
|
||||
+ { .compatible = "gpio-keys", },
|
||||
/* For all PCI controllers */
|
||||
{ .compatible = "fsl,mpc8540-pci", },
|
||||
{ .compatible = "fsl,mpc8548-pcie", },
|
||||
@@ -0,0 +1,83 @@
|
||||
From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Wed, 20 Feb 2013 08:40:33 +0100
|
||||
Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
|
||||
board
|
||||
|
||||
This patch adds support for the TP-Link TL-WDR4900 v1
|
||||
concurrent dual-band wireless router. The devices uses
|
||||
the Freescale P1014 SoC.
|
||||
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
arch/powerpc/boot/Makefile | 3 ++-
|
||||
arch/powerpc/boot/wrapper | 5 +++++
|
||||
arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++
|
||||
arch/powerpc/platforms/85xx/Makefile | 1 +
|
||||
4 files changed, 20 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -157,6 +157,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
|
||||
src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
|
||||
src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
|
||||
src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
|
||||
+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
|
||||
|
||||
src-wlib := $(sort $(src-wlib-y))
|
||||
src-plat := $(sort $(src-plat-y))
|
||||
@@ -336,7 +337,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
|
||||
image-$(CONFIG_TQM8560) += cuImage.tqm8560
|
||||
image-$(CONFIG_SBC8548) += cuImage.sbc8548
|
||||
image-$(CONFIG_KSI8560) += cuImage.ksi8560
|
||||
-
|
||||
+image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
|
||||
# Board ports in arch/powerpc/platform/86xx/Kconfig
|
||||
image-$(CONFIG_MVME7100) += dtbImage.mvme7100
|
||||
|
||||
--- a/arch/powerpc/boot/wrapper
|
||||
+++ b/arch/powerpc/boot/wrapper
|
||||
@@ -324,6 +324,11 @@ adder875-redboot)
|
||||
platformo="$object/fixed-head.o $object/redboot-8xx.o"
|
||||
binary=y
|
||||
;;
|
||||
+simpleboot-tl-wdr4900-v1)
|
||||
+ platformo="$object/fixed-head.o $object/simpleboot.o"
|
||||
+ link_address='0x1000000'
|
||||
+ binary=y
|
||||
+ ;;
|
||||
simpleboot-*)
|
||||
platformo="$object/fixed-head.o $object/simpleboot.o"
|
||||
binary=y
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -170,6 +170,18 @@ config STX_GP3
|
||||
select CPM2
|
||||
select DEFAULT_UIMAGE
|
||||
|
||||
+config TL_WDR4900_V1
|
||||
+ bool "TP-Link TL-WDR4900 v1"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ select SWIOTLB
|
||||
+ help
|
||||
+ This option enables support for the TP-Link TL-WDR4900 v1 board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless router with a
|
||||
+ Freescale P1014 SoC.
|
||||
+
|
||||
config TQM8540
|
||||
bool "TQ Components TQM8540"
|
||||
help
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
obj-$(CONFIG_TQM85xx) += tqm85xx.o
|
||||
+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
|
||||
obj-$(CONFIG_SBC8548) += sbc8548.o
|
||||
obj-$(CONFIG_PPA8548) += ppa8548.o
|
||||
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
|
||||
@@ -0,0 +1,30 @@
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -49,6 +49,17 @@ config BSC9132_QDS
|
||||
and dual StarCore SC3850 DSP cores.
|
||||
Manufacturer : Freescale Semiconductor, Inc
|
||||
|
||||
+config HIVEAP_330
|
||||
+ bool "Aerohive HiveAP-330"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the Aerohive HiveAP-330 board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless access point with a
|
||||
+ Freescale P1020 SoC.
|
||||
+
|
||||
config MPC8540_ADS
|
||||
bool "Freescale MPC8540 ADS"
|
||||
select DEFAULT_UIMAGE
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -10,6 +10,7 @@ obj-y += common.o
|
||||
obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
|
||||
obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
|
||||
obj-$(CONFIG_C293_PCIE) += c293pcie.o
|
||||
+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
|
||||
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
|
||||
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
|
||||
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
|
||||
@@ -0,0 +1,37 @@
|
||||
--- a/arch/powerpc/Kconfig
|
||||
+++ b/arch/powerpc/Kconfig
|
||||
@@ -932,6 +932,14 @@ config CMDLINE_FORCE
|
||||
|
||||
endchoice
|
||||
|
||||
+config CMDLINE_OVERRIDE
|
||||
+ bool "Use alternative cmdline from device tree"
|
||||
+ help
|
||||
+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
|
||||
+ be used, this is not a good option for kernels that are shared across
|
||||
+ devices. This setting enables using "chosen/cmdline-override" as the
|
||||
+ cmdline if it exists in the device tree.
|
||||
+
|
||||
config EXTRA_TARGETS
|
||||
string "Additional default image types"
|
||||
help
|
||||
--- a/drivers/of/fdt.c
|
||||
+++ b/drivers/of/fdt.c
|
||||
@@ -1056,6 +1056,17 @@ int __init early_init_dt_scan_chosen(uns
|
||||
if (p != NULL && l > 0)
|
||||
strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
|
||||
|
||||
+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
|
||||
+ * device tree option of chosen/bootargs-override. This is
|
||||
+ * helpful on boards where u-boot sets bootargs, and is unable
|
||||
+ * to be modified.
|
||||
+ */
|
||||
+#ifdef CONFIG_CMDLINE_OVERRIDE
|
||||
+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
|
||||
+ if (p != NULL && l > 0)
|
||||
+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
|
||||
+#endif
|
||||
+
|
||||
/*
|
||||
* CONFIG_CMDLINE is meant to be a default in case nothing else
|
||||
* managed to set the command line, unless CONFIG_CMDLINE_FORCE
|
||||
@@ -0,0 +1,29 @@
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -173,6 +173,16 @@ config XES_MPC85xx
|
||||
Manufacturer: Extreme Engineering Solutions, Inc.
|
||||
URL: <https://www.xes-inc.com/>
|
||||
|
||||
+config RED_15W_REV1
|
||||
+ bool "Sophos RED 15w Rev.1"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the Sophos RED 15w Rev.1 board.
|
||||
+
|
||||
+ This board is a wireless VPN router with a Freescale P1010 SoC.
|
||||
+
|
||||
config STX_GP3
|
||||
bool "Silicon Turnkey Express GP3"
|
||||
help
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
obj-$(CONFIG_TQM85xx) += tqm85xx.o
|
||||
obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
|
||||
@@ -0,0 +1,170 @@
|
||||
From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
|
||||
From: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
Date: Sun, 30 Dec 2018 23:24:41 +0100
|
||||
Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
|
||||
|
||||
This patch apply chages for OpenWRT in P2020RDB
|
||||
dts file.
|
||||
|
||||
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
||||
---
|
||||
arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
|
||||
1 file changed, 63 insertions(+), 35 deletions(-)
|
||||
|
||||
--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
|
||||
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
|
||||
@@ -5,10 +5,15 @@
|
||||
* Copyright 2009-2012 Freescale Semiconductor Inc.
|
||||
*/
|
||||
|
||||
+/dts-v1/;
|
||||
+
|
||||
/include/ "p2020si-pre.dtsi"
|
||||
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
/ {
|
||||
- model = "fsl,P2020RDB";
|
||||
+ model = "Freescale P2020RDB";
|
||||
compatible = "fsl,P2020RDB";
|
||||
|
||||
aliases {
|
||||
@@ -34,48 +39,38 @@
|
||||
0x2 0x0 0x0 0xffb00000 0x00020000>;
|
||||
|
||||
nor@0,0 {
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x1000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
- partition@0 {
|
||||
- /* This location must not be altered */
|
||||
- /* 256KB for Vitesse 7385 Switch firmware */
|
||||
- reg = <0x0 0x00040000>;
|
||||
- label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
- read-only;
|
||||
- };
|
||||
-
|
||||
- partition@40000 {
|
||||
- /* 256KB for DTB Image */
|
||||
- reg = <0x00040000 0x00040000>;
|
||||
- label = "NOR (RO) DTB Image";
|
||||
- read-only;
|
||||
- };
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
|
||||
- partition@80000 {
|
||||
- /* 3.5 MB for Linux Kernel Image */
|
||||
- reg = <0x00080000 0x00380000>;
|
||||
- label = "NOR (RO) Linux Kernel Image";
|
||||
- read-only;
|
||||
- };
|
||||
+ partition@0 {
|
||||
+ /* This location must not be altered */
|
||||
+ /* 256KB for Vitesse 7385 Switch firmware */
|
||||
+ reg = <0x0 0x00040000>;
|
||||
+ label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
+ read-only;
|
||||
+ };
|
||||
|
||||
- partition@400000 {
|
||||
- /* 11MB for JFFS2 based Root file System */
|
||||
- reg = <0x00400000 0x00b00000>;
|
||||
- label = "NOR (RW) JFFS2 Root File System";
|
||||
- };
|
||||
+ partition@40000 {
|
||||
+ compatible = "denx,fit";
|
||||
+ reg = <0x00040000 0x00ec0000>;
|
||||
+ label = "firmware";
|
||||
+ };
|
||||
|
||||
- partition@f00000 {
|
||||
- /* This location must not be altered */
|
||||
- /* 512KB for u-boot Bootloader Image */
|
||||
- /* 512KB for u-boot Environment Variables */
|
||||
- reg = <0x00f00000 0x00100000>;
|
||||
- label = "NOR (RO) U-Boot Image";
|
||||
- read-only;
|
||||
+ partition@f00000 {
|
||||
+ /* This location must not be altered */
|
||||
+ /* 512KB for u-boot Bootloader Image */
|
||||
+ /* 512KB for u-boot Environment Variables */
|
||||
+ reg = <0x00f00000 0x00100000>;
|
||||
+ label = "u-boot";
|
||||
+ read-only;
|
||||
+ };
|
||||
};
|
||||
};
|
||||
|
||||
@@ -85,6 +80,7 @@
|
||||
compatible = "fsl,p2020-fcm-nand",
|
||||
"fsl,elbc-fcm-nand";
|
||||
reg = <0x1 0x0 0x40000>;
|
||||
+ nand-ecc-mode = "none";
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
@@ -140,13 +136,43 @@
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
+ gpio0: gpio-controller@fc00 {
|
||||
+ };
|
||||
+
|
||||
i2c@3000 {
|
||||
+ temperature-sensor@4c {
|
||||
+ compatible = "adi,adt7461";
|
||||
+ reg = <0x4c>;
|
||||
+ };
|
||||
+
|
||||
+ eeprom@50 {
|
||||
+ compatible = "atmel,24c256";
|
||||
+ reg = <0x50>;
|
||||
+ };
|
||||
+
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
+ i2c@3100 {
|
||||
+ pmic@11 {
|
||||
+ compatible = "zl2006";
|
||||
+ reg = <0x11>;
|
||||
+ };
|
||||
+
|
||||
+ gpio@18 {
|
||||
+ compatible = "nxp,pca9557";
|
||||
+ reg = <0x18>;
|
||||
+ };
|
||||
+
|
||||
+ eeprom@52 {
|
||||
+ compatible = "atmel,24c01";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
@@ -200,10 +226,12 @@
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x0>;
|
||||
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
tbi-phy@2 {
|
||||
device_type = "tbi-phy";
|
||||
@@ -0,0 +1,30 @@
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -60,6 +60,17 @@ config HIVEAP_330
|
||||
This board is a Concurrent Dual-Band wireless access point with a
|
||||
Freescale P1020 SoC.
|
||||
|
||||
+config PANDA
|
||||
+ bool "OCEDO PANDA"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the OCEDO PANDA board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless access point with a
|
||||
+ Freescale P1020 SoC.
|
||||
+
|
||||
config MPC8540_ADS
|
||||
bool "Freescale MPC8540 ADS"
|
||||
select DEFAULT_UIMAGE
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
|
||||
obj-$(CONFIG_P1022_DS) += p1022_ds.o
|
||||
obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
|
||||
obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
+obj-$(CONFIG_PANDA) += panda.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
@@ -0,0 +1,30 @@
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -71,6 +71,17 @@ config PANDA
|
||||
This board is a Concurrent Dual-Band wireless access point with a
|
||||
Freescale P1020 SoC.
|
||||
|
||||
+config WS_AP3710I
|
||||
+ bool "Enterasys WS-AP3710i"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the Enterasys WS-AP3710i board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless access point with a
|
||||
+ Freescale P1020 SoC.
|
||||
+
|
||||
config MPC8540_ADS
|
||||
bool "Freescale MPC8540 ADS"
|
||||
select DEFAULT_UIMAGE
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
|
||||
obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
obj-$(CONFIG_PANDA) += panda.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
+obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
|
||||
@@ -0,0 +1,42 @@
|
||||
From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001
|
||||
From: David Bauer <mail@david-bauer.net>
|
||||
Date: Sat, 29 Feb 2020 14:27:04 +0100
|
||||
Subject: [PATCH] powerpc: bootwrapper: disable uImage generation
|
||||
|
||||
Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
|
||||
instruct the mkimage to use the xz compression, which isn't
|
||||
supported. This disables the uImage generation, as OpenWrt
|
||||
generates individual uImages for each board using it's own
|
||||
toolchain.
|
||||
|
||||
Signed-off-by: David Bauer <mail@david-bauer.net>
|
||||
---
|
||||
arch/powerpc/boot/Makefile | 9 ---------
|
||||
1 file changed, 9 deletions(-)
|
||||
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -264,7 +264,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp
|
||||
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
|
||||
image-$(CONFIG_PPC_PMAC) += zImage.pmac
|
||||
image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
|
||||
-image-$(CONFIG_DEFAULT_UIMAGE) += uImage
|
||||
image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
|
||||
|
||||
#
|
||||
@@ -395,15 +394,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
|
||||
$(obj)/vmlinux.strip: vmlinux
|
||||
$(STRIP) -s -R .comment $< -o $@
|
||||
|
||||
-$(obj)/uImage: vmlinux $(wrapperbits) FORCE
|
||||
- $(call if_changed,wrap,uboot)
|
||||
-
|
||||
-$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
|
||||
- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
|
||||
-
|
||||
-$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
|
||||
- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
|
||||
-
|
||||
$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
|
||||
$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
|
||||
|
||||
Reference in New Issue
Block a user