Initial commit
This commit is contained in:
		
							
								
								
									
										104
									
								
								target/linux/ramips/dts/mt7620n_wrtnode_wrtnode.dts
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										104
									
								
								target/linux/ramips/dts/mt7620n_wrtnode_wrtnode.dts
									
									
									
									
									
										Normal file
									
								
							| @@ -0,0 +1,104 @@ | ||||
| #include "mt7620n.dtsi" | ||||
|  | ||||
| #include <dt-bindings/gpio/gpio.h> | ||||
|  | ||||
| / { | ||||
| 	compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc"; | ||||
| 	model = "WRTNODE"; | ||||
|  | ||||
| 	aliases { | ||||
| 		led-boot = &led_indicator; | ||||
| 		led-failsafe = &led_indicator; | ||||
| 		led-running = &led_indicator; | ||||
| 		led-upgrade = &led_indicator; | ||||
| 	}; | ||||
|  | ||||
| 	leds { | ||||
| 		compatible = "gpio-leds"; | ||||
|  | ||||
| 		led_indicator: indicator { | ||||
| 			label = "blue:indicator"; | ||||
| 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; | ||||
| 		}; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &gpio1 { | ||||
| 	status = "okay"; | ||||
| }; | ||||
|  | ||||
| &spi0 { | ||||
| 	status = "okay"; | ||||
|  | ||||
| 	flash@0 { | ||||
| 		compatible = "jedec,spi-nor"; | ||||
| 		reg = <0>; | ||||
| 		spi-max-frequency = <10000000>; | ||||
|  | ||||
| 		partitions { | ||||
| 			compatible = "fixed-partitions"; | ||||
| 			#address-cells = <1>; | ||||
| 			#size-cells = <1>; | ||||
|  | ||||
| 			partition@0 { | ||||
| 				label = "u-boot"; | ||||
| 				reg = <0x0 0x30000>; | ||||
| 				read-only; | ||||
| 			}; | ||||
|  | ||||
| 			partition@30000 { | ||||
| 				label = "u-boot-env"; | ||||
| 				reg = <0x30000 0x10000>; | ||||
| 				read-only; | ||||
| 			}; | ||||
|  | ||||
| 			factory: partition@40000 { | ||||
| 				label = "factory"; | ||||
| 				reg = <0x40000 0x10000>; | ||||
| 				read-only; | ||||
| 			}; | ||||
|  | ||||
| 			partition@50000 { | ||||
| 				compatible = "denx,uimage"; | ||||
| 				label = "firmware"; | ||||
| 				reg = <0x50000 0xfb0000>; | ||||
| 			}; | ||||
| 		}; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &ehci { | ||||
| 	status = "okay"; | ||||
| }; | ||||
|  | ||||
| &ohci { | ||||
| 	status = "okay"; | ||||
| }; | ||||
|  | ||||
| ðernet { | ||||
| 	nvmem-cells = <&macaddr_factory_4>; | ||||
| 	nvmem-cell-names = "mac-address"; | ||||
|  | ||||
| 	mediatek,portmap = "wllll"; | ||||
| }; | ||||
|  | ||||
| &wmac { | ||||
| 	ralink,mtd-eeprom = <&factory 0x0>; | ||||
| }; | ||||
|  | ||||
| &state_default { | ||||
| 	default { | ||||
| 		groups = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk"; | ||||
| 		function = "gpio"; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &factory { | ||||
| 	compatible = "nvmem-cells"; | ||||
| 	#address-cells = <1>; | ||||
| 	#size-cells = <1>; | ||||
|  | ||||
| 	macaddr_factory_4: macaddr@4 { | ||||
| 		reg = <0x4 0x6>; | ||||
| 	}; | ||||
| }; | ||||
		Reference in New Issue
	
	Block a user
	 domenico
					domenico