Initial commit

target/linux/ramips/dts/mt7628an_ravpower_rp-wd009.dts

@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "ravpower,rp-wd009", "mediatek,mt7628an-soc";
+	model = "RAVPower RP-WD009";
+
+	aliases {
+		led-boot = &led_globe;
+		led-failsafe = &led_globe;
+		led-running = &led_globe;
+		led-upgrade = &led_globe;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_globe: globe {
+			label = "white:globe";
+			gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2 {
+			label = "white:wlan2";
+			gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5 {
+			label = "white:wlan5";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		sd_white {
+			label = "white:sd";
+			gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+		};
+
+		sd_red {
+			label = "red:sd";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* Power interrupt on Pin 39 */
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		backup {
+			label = "backup";
+			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_COPY>;
+		};
+	};
+};
+
+&gpio {
+	mt7610-power {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "mt7610-power";
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "uart1", "wled_an", "p0led_an", "p2led_an", "p3led_an",
+				"p4led_an", "uart2", "pwm0", "i2s";
+		function = "gpio";
+	};
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	/* Custom PMIC at 0x0a */
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5470000 6000000>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "loader";
+				reg = <0x50000 0x180000>;
+			};
+
+			partition@1d0000 {
+				label = "params";
+				reg = <0x1d0000 0x10000>;
+				read-only;
+			};
+
+			partition@1e0000 {
+				label = "user_backup";
+				reg = <0x1e0000 0x10000>;
+				read-only;
+			};
+
+			partition@1f0000 {
+				label = "user";
+				reg = <0x1f0000 0x10000>;
+				read-only;
+			};
+
+			partition@200000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x200000 0xdf0000>;
+			};
+
+			partition@ff0000 {
+				label = "mode";
+				reg = <0xff0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_4: macaddr@4 {
+		reg = <0x4 0x6>;
+	};
+};