Initial commit

target/linux/ramips/dts/rt2880_ralink_v11st-fe.dts

@@ -0,0 +1,84 @@
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "ralink,v11st-fe", "ralink,rt2880-soc";
+	model = "Ralink V11ST-FE";
+
+	aliases {
+		led-boot = &led_status;
+		led-failsafe = &led_status;
+		led-running = &led_status;
+		led-upgrade = &led_status;
+	};
+
+	flash@1c000000 {
+		compatible = "cfi-flash";
+		reg = <0x1c000000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x0030000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@30000 {
+				reg = <0x00030000 0x00010000>;
+				label = "u-boot-env";
+				read-only;
+			};
+
+			factory: partition@40000 {
+				reg = <0x00040000 0x00010000>;
+				label = "factory";
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				reg = <0x00050000 0x003b0000>;
+				label = "firmware";
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status: status {
+			label = "green:status";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+};
+
+&pci {
+	status = "okay";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0x0>;
+};