Initial commit

target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-10p.dts

@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl838x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
+	model = "D-Link DGS-1210-10P";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			// GPIO 24 seems to provide power to the leds
+			label = "green:power";
+			gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		mode {
+			label = "reset";
+			gpios = <&gpio0 94 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+
+&gpio0 {
+	indirect-access-bus-id = <0>;
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x80000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "u-boot-env";
+				reg = <0x00080000 0x40000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "u-boot-env2";
+				reg = <0x000c0000 0x40000>;
+			};
+			partition@280000 {
+				label = "firmware";
+				compatible = "denx,uimage";
+				reg = <0x00100000 0xd80000>;
+			};
+			partition@be80000 {
+				label = "kernel2";
+				reg = <0x00e80000 0x180000>;
+			};
+			partition@1000000 {
+				label = "sysinfo";
+				reg = <0x01000000 0x40000>;
+			};
+			partition@1040000 {
+				label = "rootfs2";
+				reg = <0x01040000 0xc00000>;
+			};
+			partition@1c40000 {
+				label = "jffs2";
+				reg = <0x01c40000 0x3c0000>;
+			};
+		};
+	};
+};
+
+&ethernet0 {
+	mdio: mdio-bus {
+		compatible = "realtek,rtl838x-mdio";
+		regmap = <&ethernet0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		INTERNAL_PHY(8)
+		INTERNAL_PHY(9)
+		INTERNAL_PHY(10)
+		INTERNAL_PHY(11)
+		INTERNAL_PHY(12)
+		INTERNAL_PHY(13)
+		INTERNAL_PHY(14)
+		INTERNAL_PHY(15)
+		INTERNAL_PHY(24)
+		INTERNAL_PHY(26)
+	};
+};
+
+&switch0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		SWITCH_PORT(8, 1, internal)
+		SWITCH_PORT(9, 2, internal)
+		SWITCH_PORT(10, 3, internal)
+		SWITCH_PORT(11, 4, internal)
+		SWITCH_PORT(12, 5, internal)
+		SWITCH_PORT(13, 6, internal)
+		SWITCH_PORT(14, 7, internal)
+		SWITCH_PORT(15, 8, internal)
+		SWITCH_SFP_PORT(24, 9, rgmii-id)
+		SWITCH_SFP_PORT(26, 10, rgmii-id)
+
+		port@28 {
+			ethernet = <&ethernet0>;
+			reg = <28>;
+			phy-mode = "internal";
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};