domenico/openwrt-kernel5.4-nss-qsdk10.0
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
domenico
2025-06-24 13:14:22 +02:00
commit 4002f145fc
9002 changed files with 1731834 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

103
target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch Normal file
View File

@@ -0,0 +1,103 @@
From a362c0ce64866939c3daa17c76943cfed555b065 Mon Sep 17 00:00:00 2001
From: Sander Vanheule <sander@svanheule.net>
Date: Tue, 30 Mar 2021 19:48:42 +0200
Subject: dt-bindings: gpio: Binding for Realtek Otto GPIO
Add a binding description for Realtek's GPIO controller found on several
of their MIPS-based SoCs (codenamed Otto), such as the RTL838x and
RTL839x series of switch SoCs.
A fallback binding 'realtek,otto-gpio' is provided for cases where the
actual port ordering is not known yet, and enabling the interrupt
controller may result in uncaught interrupts.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../bindings/gpio/realtek,otto-gpio.yaml | 78 ++++++++++++++++++++++
1 file changed, 78 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto GPIO controller
+
+maintainers:
+ - Sander Vanheule <sander@svanheule.net>
+ - Bert Vermeulen <bert@biot.com>
+
+description: |
+ Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists
+ of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts.
+ Each bank's interrupts are cascased into one interrupt line on the parent
+ interrupt controller, if provided.
+ This binding allows defining a single bank in the devicetree. The interrupt
+ controller is not supported on the fallback compatible name, which only
+ allows for GPIO port use.
+
+properties:
+ $nodename:
+ pattern: "^gpio@[0-9a-f]+$"
+
+ compatible:
+ items:
+ - enum:
+ - realtek,rtl8380-gpio
+ - realtek,rtl8390-gpio
+ - const: realtek,otto-gpio
+
+ reg:
+ maxItems: 1
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ ngpios:
+ minimum: 1
+ maximum: 32
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#gpio-cells"
+ - gpio-controller
+
+additionalProperties: false
+
+dependencies:
+ interrupt-controller: [ interrupts ]
+
+examples:
+ - |
+ gpio@3500 {
+ compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
+ reg = <0x3500 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <24>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&rtlintc>;
+ interrupts = <23>;
+ };
+
+...

394
target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch Normal file
View File

@@ -0,0 +1,394 @@
From f0f7d662e8514169c90d3d84cd6df773b2983088 Mon Sep 17 00:00:00 2001
From: Sander Vanheule <sander@svanheule.net>
Date: Tue, 30 Mar 2021 19:48:43 +0200
Subject: gpio: Add Realtek Otto GPIO support
Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
64 GPIOs, divided over two banks. Each bank has a set of registers for
32 GPIOs, with support for edge-triggered interrupts.
Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
registers pack one bit per GPIO, except for the IMR register, which
packs two bits per GPIO (AB-CD).
Although the byte order is currently assumed to have port A..D at offset
0x0..0x3, this has been observed to be reversed on other, Lexra-based,
SoCs (e.g. RTL8196E/97D/97F).
Interrupt support is disabled for the fallback devicetree-compatible
'realtek,otto-gpio'. This allows for quick support of GPIO banks in
which the byte order would be unknown. In this case, the port ordering
in the IMR registers may not match the reversed order in the other
registers (DCBA, and BA-DC or DC-BA).
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/gpio/Kconfig | 13 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-realtek-otto.c | 325 +++++++++++++++++++++++++++++++++++++++
3 files changed, 339 insertions(+)
create mode 100644 drivers/gpio/gpio-realtek-otto.c
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -489,6 +489,19 @@ config GPIO_RDA
help
Say Y here to support RDA Micro GPIO controller.
+config GPIO_REALTEK_OTTO
+ tristate "Realtek Otto GPIO support"
+ depends on MACH_REALTEK_RTL
+ default MACH_REALTEK_RTL
+ select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
+ help
+ The GPIO controller on the Otto MIPS platform supports up to two
+ banks of 32 GPIOs, with edge triggered interrupts. The 32 GPIOs
+ are grouped in four 8-bit wide ports.
+
+ When built as a module, the module will be called realtek_otto_gpio.
+
config GPIO_REG
bool
help
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -124,6 +124,7 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
+obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
obj-$(CONFIG_GPIO_REG) += gpio-reg.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
--- /dev/null
+++ b/drivers/gpio/gpio-realtek-otto.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/minmax.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+/*
+ * Total register block size is 0x1C for one bank of four ports (A, B, C, D).
+ * An optional second bank, with ports E, F, G, and H, may be present, starting
+ * at register offset 0x1C.
+ */
+
+/*
+ * Pin select: (0) "normal", (1) "dedicate peripheral"
+ * Not used on RTL8380/RTL8390, peripheral selection is managed by control bits
+ * in the peripheral registers.
+ */
+#define REALTEK_GPIO_REG_CNR 0x00
+/* Clear bit (0) for input, set bit (1) for output */
+#define REALTEK_GPIO_REG_DIR 0x08
+#define REALTEK_GPIO_REG_DATA 0x0C
+/* Read bit for IRQ status, write 1 to clear IRQ */
+#define REALTEK_GPIO_REG_ISR 0x10
+/* Two bits per GPIO in IMR registers */
+#define REALTEK_GPIO_REG_IMR 0x14
+#define REALTEK_GPIO_REG_IMR_AB 0x14
+#define REALTEK_GPIO_REG_IMR_CD 0x18
+#define REALTEK_GPIO_IMR_LINE_MASK GENMASK(1, 0)
+#define REALTEK_GPIO_IRQ_EDGE_FALLING 1
+#define REALTEK_GPIO_IRQ_EDGE_RISING 2
+#define REALTEK_GPIO_IRQ_EDGE_BOTH 3
+
+#define REALTEK_GPIO_MAX 32
+#define REALTEK_GPIO_PORTS_PER_BANK 4
+
+/**
+ * realtek_gpio_ctrl - Realtek Otto GPIO driver data
+ *
+ * @gc: Associated gpio_chip instance
+ * @base: Base address of the register block for a GPIO bank
+ * @lock: Lock for accessing the IRQ registers and values
+ * @intr_mask: Mask for interrupts lines
+ * @intr_type: Interrupt type selection
+ *
+ * Because the interrupt mask register (IMR) combines the function of IRQ type
+ * selection and masking, two extra values are stored. @intr_mask is used to
+ * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
+ * the selected interrupt types. The logical AND of these values is written to
+ * IMR on changes.
+ */
+struct realtek_gpio_ctrl {
+ struct gpio_chip gc;
+ void __iomem *base;
+ raw_spinlock_t lock;
+ u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
+ u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
+};
+
+/* Expand with more flags as devices with other quirks are added */
+enum realtek_gpio_flags {
+ /*
+ * Allow disabling interrupts, for cases where the port order is
+ * unknown. This may result in a port mismatch between ISR and IMR.
+ * An interrupt would appear to come from a different line than the
+ * line the IRQ handler was assigned to, causing uncaught interrupts.
+ */
+ GPIO_INTERRUPTS_DISABLED = BIT(0),
+};
+
+static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+
+ return container_of(gc, struct realtek_gpio_ctrl, gc);
+}
+
+/*
+ * Normal port order register access
+ *
+ * Port information is stored with the first port at offset 0, followed by the
+ * second, etc. Most registers store one bit per GPIO and use a u8 value per
+ * port. The two interrupt mask registers store two bits per GPIO, so use u16
+ * values.
+ */
+static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
+ unsigned int port, u16 irq_type, u16 irq_mask)
+{
+ iowrite16(irq_type & irq_mask, ctrl->base + REALTEK_GPIO_REG_IMR + 2 * port);
+}
+
+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
+ unsigned int port, u8 mask)
+{
+ iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + port);
+}
+
+static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
+{
+ return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + port);
+}
+
+/* Set the rising and falling edge mask bits for a GPIO port pin */
+static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
+{
+ return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
+}
+
+static void realtek_gpio_irq_ack(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ irq_hw_number_t line = irqd_to_hwirq(data);
+ unsigned int port = line / 8;
+ unsigned int port_pin = line % 8;
+
+ realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
+}
+
+static void realtek_gpio_irq_unmask(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned int port = line / 8;
+ unsigned int port_pin = line % 8;
+ unsigned long flags;
+ u16 m;
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ m = ctrl->intr_mask[port];
+ m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+ ctrl->intr_mask[port] = m;
+ realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static void realtek_gpio_irq_mask(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned int port = line / 8;
+ unsigned int port_pin = line % 8;
+ unsigned long flags;
+ u16 m;
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ m = ctrl->intr_mask[port];
+ m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+ ctrl->intr_mask[port] = m;
+ realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned int port = line / 8;
+ unsigned int port_pin = line % 8;
+ unsigned long flags;
+ u16 type, t;
+
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_FALLING:
+ type = REALTEK_GPIO_IRQ_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ type = REALTEK_GPIO_IRQ_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ type = REALTEK_GPIO_IRQ_EDGE_BOTH;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ irq_set_handler_locked(data, handle_edge_irq);
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ t = ctrl->intr_type[port];
+ t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+ t |= realtek_gpio_imr_bits(port_pin, type);
+ ctrl->intr_type[port] = t;
+ realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+
+ return 0;
+}
+
+static void realtek_gpio_irq_handler(struct irq_desc *desc)
+{
+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+ struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+ unsigned int lines_done;
+ unsigned int port_pin_count;
+ unsigned int irq;
+ unsigned long status;
+ int offset;
+
+ chained_irq_enter(irq_chip, desc);
+
+ for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
+ status = realtek_gpio_read_isr(ctrl, lines_done / 8);
+ port_pin_count = min(gc->ngpio - lines_done, 8U);
+ for_each_set_bit(offset, &status, port_pin_count) {
+ irq = irq_find_mapping(gc->irq.domain, offset);
+ generic_handle_irq(irq);
+ }
+ }
+
+ chained_irq_exit(irq_chip, desc);
+}
+
+static int realtek_gpio_irq_init(struct gpio_chip *gc)
+{
+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+ unsigned int port;
+
+ for (port = 0; (port * 8) < gc->ngpio; port++) {
+ realtek_gpio_write_imr(ctrl, port, 0, 0);
+ realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
+ }
+
+ return 0;
+}
+
+static struct irq_chip realtek_gpio_irq_chip = {
+ .name = "realtek-otto-gpio",
+ .irq_ack = realtek_gpio_irq_ack,
+ .irq_mask = realtek_gpio_irq_mask,
+ .irq_unmask = realtek_gpio_irq_unmask,
+ .irq_set_type = realtek_gpio_irq_set_type,
+};
+
+static const struct of_device_id realtek_gpio_of_match[] = {
+ {
+ .compatible = "realtek,otto-gpio",
+ .data = (void *)GPIO_INTERRUPTS_DISABLED,
+ },
+ {
+ .compatible = "realtek,rtl8380-gpio",
+ },
+ {
+ .compatible = "realtek,rtl8390-gpio",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
+
+static int realtek_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ unsigned int dev_flags;
+ struct gpio_irq_chip *girq;
+ struct realtek_gpio_ctrl *ctrl;
+ u32 ngpios;
+ int err, irq;
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ dev_flags = (unsigned int) device_get_match_data(dev);
+
+ ngpios = REALTEK_GPIO_MAX;
+ device_property_read_u32(dev, "ngpios", &ngpios);
+
+ if (ngpios > REALTEK_GPIO_MAX) {
+ dev_err(&pdev->dev, "invalid ngpios (max. %d)\n",
+ REALTEK_GPIO_MAX);
+ return -EINVAL;
+ }
+
+ ctrl->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ctrl->base))
+ return PTR_ERR(ctrl->base);
+
+ raw_spin_lock_init(&ctrl->lock);
+
+ err = bgpio_init(&ctrl->gc, dev, 4,
+ ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL,
+ ctrl->base + REALTEK_GPIO_REG_DIR, NULL,
+ BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+ if (err) {
+ dev_err(dev, "unable to init generic GPIO");
+ return err;
+ }
+
+ ctrl->gc.ngpio = ngpios;
+ ctrl->gc.owner = THIS_MODULE;
+
+ irq = platform_get_irq_optional(pdev, 0);
+ if (!(dev_flags & GPIO_INTERRUPTS_DISABLED) && irq > 0) {
+ girq = &ctrl->gc.irq;
+ girq->chip = &realtek_gpio_irq_chip;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_bad_irq;
+ girq->parent_handler = realtek_gpio_irq_handler;
+ girq->num_parents = 1;
+ girq->parents = devm_kcalloc(dev, girq->num_parents,
+ sizeof(*girq->parents), GFP_KERNEL);
+ if (!girq->parents)
+ return -ENOMEM;
+ girq->parents[0] = irq;
+ girq->init_hw = realtek_gpio_irq_init;
+ }
+
+ return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+}
+
+static struct platform_driver realtek_gpio_driver = {
+ .driver = {
+ .name = "realtek-otto-gpio",
+ .of_match_table = realtek_gpio_of_match,
+ },
+ .probe = realtek_gpio_probe,
+};
+module_platform_driver(realtek_gpio_driver);
+
+MODULE_DESCRIPTION("Realtek Otto GPIO support");
+MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
+MODULE_LICENSE("GPL v2");

57
target/linux/realtek/patches-5.10/003-5.12-spi-realtek-rtl838x-rtl839x-spi-controller.patch Normal file
View File

@@ -0,0 +1,57 @@
From 6acbd614c2c8d3b8de5fb7605d6e24b9b3a8a17b Mon Sep 17 00:00:00 2001
From: Bert Vermeulen <bert@biot.com>
Date: Wed, 20 Jan 2021 14:59:27 +0100
Subject: spi: Realtek RTL838x/RTL839x SPI controller
Signed-off-by: Bert Vermeulen <bert@biot.com>
Link: https://lore.kernel.org/r/20210120135928.246054-2-bert@biot.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/spi/realtek,rtl-spi.yaml | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/realtek,rtl-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL838x/RTL839x SPI controller
+
+maintainers:
+ - Bert Vermeulen <bert@biot.com>
+ - Birger Koblitz <mail@birger-koblitz.de>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - const: realtek,rtl8380-spi
+ - const: realtek,rtl8382-spi
+ - const: realtek,rtl8391-spi
+ - const: realtek,rtl8392-spi
+ - const: realtek,rtl8393-spi
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi: spi@1200 {
+ compatible = "realtek,rtl8382-spi";
+ reg = <0x1200 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };

248
target/linux/realtek/patches-5.10/004-5.12-spi-realtek-rtl-add-support-for-realtek-rtl838x-rtl839x-spi-controllers.patch Normal file
View File

@@ -0,0 +1,248 @@
From a8af5cc2ff1e804694629a8ef320935629dd15ba Mon Sep 17 00:00:00 2001
From: Bert Vermeulen <bert@biot.com>
Date: Wed, 20 Jan 2021 14:59:28 +0100
Subject: spi: realtek-rtl: Add support for Realtek RTL838x/RTL839x SPI
controllers
This driver likely also supports earlier (RTL8196) and later (RTL93xx)
SoCs.
The SPI hardware in these SoCs is specifically intended for connecting NOR
bootflash chips, and only used for that in dozens of examined devices.
However boiled down to basics, it's really just a half-duplex SPI
controller.
The hardware appears to have a vestigial second chip-select control, but
it hasn't been seen in the wild and is thus not supported.
Signed-off-by: Bert Vermeulen <bert@biot.com>
Link: https://lore.kernel.org/r/20210120135928.246054-3-bert@biot.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/Makefile | 1 +
drivers/spi/spi-realtek-rtl.c | 209 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 210 insertions(+)
create mode 100644 drivers/spi/spi-realtek-rtl.c
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
--- /dev/null
+++ b/drivers/spi/spi-realtek-rtl.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/spi/spi.h>
+
+struct rtspi {
+ void __iomem *base;
+};
+
+/* SPI Flash Configuration Register */
+#define RTL_SPI_SFCR 0x00
+#define RTL_SPI_SFCR_RBO BIT(28)
+#define RTL_SPI_SFCR_WBO BIT(27)
+
+/* SPI Flash Control and Status Register */
+#define RTL_SPI_SFCSR 0x08
+#define RTL_SPI_SFCSR_CSB0 BIT(31)
+#define RTL_SPI_SFCSR_CSB1 BIT(30)
+#define RTL_SPI_SFCSR_RDY BIT(27)
+#define RTL_SPI_SFCSR_CS BIT(24)
+#define RTL_SPI_SFCSR_LEN_MASK ~(0x03 << 28)
+#define RTL_SPI_SFCSR_LEN1 (0x00 << 28)
+#define RTL_SPI_SFCSR_LEN4 (0x03 << 28)
+
+/* SPI Flash Data Register */
+#define RTL_SPI_SFDR 0x0c
+
+#define REG(x) (rtspi->base + x)
+
+
+static void rt_set_cs(struct spi_device *spi, bool active)
+{
+ struct rtspi *rtspi = spi_controller_get_devdata(spi->controller);
+ u32 value;
+
+ /* CS0 bit is active low */
+ value = readl(REG(RTL_SPI_SFCSR));
+ if (active)
+ value |= RTL_SPI_SFCSR_CSB0;
+ else
+ value &= ~RTL_SPI_SFCSR_CSB0;
+ writel(value, REG(RTL_SPI_SFCSR));
+}
+
+static void set_size(struct rtspi *rtspi, int size)
+{
+ u32 value;
+
+ value = readl(REG(RTL_SPI_SFCSR));
+ value &= RTL_SPI_SFCSR_LEN_MASK;
+ if (size == 4)
+ value |= RTL_SPI_SFCSR_LEN4;
+ else if (size == 1)
+ value |= RTL_SPI_SFCSR_LEN1;
+ writel(value, REG(RTL_SPI_SFCSR));
+}
+
+static inline void wait_ready(struct rtspi *rtspi)
+{
+ while (!(readl(REG(RTL_SPI_SFCSR)) & RTL_SPI_SFCSR_RDY))
+ cpu_relax();
+}
+static void send4(struct rtspi *rtspi, const u32 *buf)
+{
+ wait_ready(rtspi);
+ set_size(rtspi, 4);
+ writel(*buf, REG(RTL_SPI_SFDR));
+}
+
+static void send1(struct rtspi *rtspi, const u8 *buf)
+{
+ wait_ready(rtspi);
+ set_size(rtspi, 1);
+ writel(buf[0] << 24, REG(RTL_SPI_SFDR));
+}
+
+static void rcv4(struct rtspi *rtspi, u32 *buf)
+{
+ wait_ready(rtspi);
+ set_size(rtspi, 4);
+ *buf = readl(REG(RTL_SPI_SFDR));
+}
+
+static void rcv1(struct rtspi *rtspi, u8 *buf)
+{
+ wait_ready(rtspi);
+ set_size(rtspi, 1);
+ *buf = readl(REG(RTL_SPI_SFDR)) >> 24;
+}
+
+static int transfer_one(struct spi_controller *ctrl, struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct rtspi *rtspi = spi_controller_get_devdata(ctrl);
+ void *rx_buf;
+ const void *tx_buf;
+ int cnt;
+
+ tx_buf = xfer->tx_buf;
+ rx_buf = xfer->rx_buf;
+ cnt = xfer->len;
+ if (tx_buf) {
+ while (cnt >= 4) {
+ send4(rtspi, tx_buf);
+ tx_buf += 4;
+ cnt -= 4;
+ }
+ while (cnt) {
+ send1(rtspi, tx_buf);
+ tx_buf++;
+ cnt--;
+ }
+ } else if (rx_buf) {
+ while (cnt >= 4) {
+ rcv4(rtspi, rx_buf);
+ rx_buf += 4;
+ cnt -= 4;
+ }
+ while (cnt) {
+ rcv1(rtspi, rx_buf);
+ rx_buf++;
+ cnt--;
+ }
+ }
+
+ spi_finalize_current_transfer(ctrl);
+
+ return 0;
+}
+
+static void init_hw(struct rtspi *rtspi)
+{
+ u32 value;
+
+ /* Turn on big-endian byte ordering */
+ value = readl(REG(RTL_SPI_SFCR));
+ value |= RTL_SPI_SFCR_RBO | RTL_SPI_SFCR_WBO;
+ writel(value, REG(RTL_SPI_SFCR));
+
+ value = readl(REG(RTL_SPI_SFCSR));
+ /* Permanently disable CS1, since it's never used */
+ value |= RTL_SPI_SFCSR_CSB1;
+ /* Select CS0 for use */
+ value &= RTL_SPI_SFCSR_CS;
+ writel(value, REG(RTL_SPI_SFCSR));
+}
+
+static int realtek_rtl_spi_probe(struct platform_device *pdev)
+{
+ struct spi_controller *ctrl;
+ struct rtspi *rtspi;
+ int err;
+
+ ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*rtspi));
+ if (!ctrl) {
+ dev_err(&pdev->dev, "Error allocating SPI controller\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, ctrl);
+ rtspi = spi_controller_get_devdata(ctrl);
+
+ rtspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (IS_ERR(rtspi->base)) {
+ dev_err(&pdev->dev, "Could not map SPI register address");
+ return -ENOMEM;
+ }
+
+ init_hw(rtspi);
+
+ ctrl->dev.of_node = pdev->dev.of_node;
+ ctrl->flags = SPI_CONTROLLER_HALF_DUPLEX;
+ ctrl->set_cs = rt_set_cs;
+ ctrl->transfer_one = transfer_one;
+
+ err = devm_spi_register_controller(&pdev->dev, ctrl);
+ if (err) {
+ dev_err(&pdev->dev, "Could not register SPI controller\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+
+static const struct of_device_id realtek_rtl_spi_of_ids[] = {
+ { .compatible = "realtek,rtl8380-spi" },
+ { .compatible = "realtek,rtl8382-spi" },
+ { .compatible = "realtek,rtl8391-spi" },
+ { .compatible = "realtek,rtl8392-spi" },
+ { .compatible = "realtek,rtl8393-spi" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, realtek_rtl_spi_of_ids);
+
+static struct platform_driver realtek_rtl_spi_driver = {
+ .probe = realtek_rtl_spi_probe,
+ .driver = {
+ .name = "realtek-rtl-spi",
+ .of_match_table = realtek_rtl_spi_of_ids,
+ },
+};
+
+module_platform_driver(realtek_rtl_spi_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
+MODULE_DESCRIPTION("Realtek RTL SPI driver");

78
target/linux/realtek/patches-5.10/005-5.12-dt-bindings-interrupt-controller-add-realtek-rtl838x-rtl839x-support.patch Normal file
View File

@@ -0,0 +1,78 @@
From 4a2b92a5d3519fc2c1edda4d4aa0e05bff41e8de Mon Sep 17 00:00:00 2001
From: Bert Vermeulen <bert@biot.com>
Date: Fri, 22 Jan 2021 21:42:23 +0100
Subject: dt-bindings: interrupt-controller: Add Realtek RTL838x/RTL839x
support
Document the binding for the Realtek RTL838x/RTL839x interrupt controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
[maz: Add a commit message, as the author couldn't be bothered...]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210122204224.509124-2-bert@biot.com
---
.../interrupt-controller/realtek,rtl-intc.yaml | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL SoC interrupt controller devicetree bindings
+
+maintainers:
+ - Birger Koblitz <mail@birger-koblitz.de>
+ - Bert Vermeulen <bert@biot.com>
+ - John Crispin <john@phrozen.org>
+
+properties:
+ compatible:
+ const: realtek,rtl-intc
+
+ "#interrupt-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#address-cells":
+ const: 0
+
+ interrupt-map:
+ description: Describes mapping from SoC interrupts to CPU interrupts
+
+required:
+ - compatible
+ - reg
+ - "#interrupt-cells"
+ - interrupt-controller
+ - "#address-cells"
+ - interrupt-map
+
+additionalProperties: false
+
+examples:
+ - |
+ intc: interrupt-controller@3000 {
+ compatible = "realtek,rtl-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0x3000 0x20>;
+ #address-cells = <0>;
+ interrupt-map =
+ <31 &cpuintc 2>,
+ <30 &cpuintc 1>,
+ <29 &cpuintc 5>;
+ };

211
target/linux/realtek/patches-5.10/006-5.12-irqchip-add-support-for-realtek-rtl838x-rtl839x-interrupt-controller.patch Normal file
View File

@@ -0,0 +1,211 @@
From 9f3a0f34b84ad1b9a8f2bdae44b66f16685b2143 Mon Sep 17 00:00:00 2001
From: Bert Vermeulen <bert@biot.com>
Date: Fri, 22 Jan 2021 21:42:24 +0100
Subject: irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller
This is a standard IRQ driver with only status and mask registers.
The mapping from SoC interrupts (18-31) to MIPS core interrupts is
done via an interrupt-map in device tree.
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210122204224.509124-3-bert@biot.com
---
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-realtek-rtl.c | 180 ++++++++++++++++++++++++++++++++++++++
2 files changed, 181 insertions(+)
create mode 100644 drivers/irqchip/irq-realtek-rtl.c
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -114,3 +114,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-l
obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o
obj-$(CONFIG_MST_IRQ) += irq-mst-intc.o
obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o
+obj-$(CONFIG_MACH_REALTEK_RTL) += irq-realtek-rtl.o
--- /dev/null
+++ b/drivers/irqchip/irq-realtek-rtl.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
+ * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2020 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/of_irq.h>
+#include <linux/irqchip.h>
+#include <linux/spinlock.h>
+#include <linux/of_address.h>
+#include <linux/irqchip/chained_irq.h>
+
+/* Global Interrupt Mask Register */
+#define RTL_ICTL_GIMR 0x00
+/* Global Interrupt Status Register */
+#define RTL_ICTL_GISR 0x04
+/* Interrupt Routing Registers */
+#define RTL_ICTL_IRR0 0x08
+#define RTL_ICTL_IRR1 0x0c
+#define RTL_ICTL_IRR2 0x10
+#define RTL_ICTL_IRR3 0x14
+
+#define REG(x) (realtek_ictl_base + x)
+
+static DEFINE_RAW_SPINLOCK(irq_lock);
+static void __iomem *realtek_ictl_base;
+
+static void realtek_ictl_unmask_irq(struct irq_data *i)
+{
+ unsigned long flags;
+ u32 value;
+
+ raw_spin_lock_irqsave(&irq_lock, flags);
+
+ value = readl(REG(RTL_ICTL_GIMR));
+ value |= BIT(i->hwirq);
+ writel(value, REG(RTL_ICTL_GIMR));
+
+ raw_spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static void realtek_ictl_mask_irq(struct irq_data *i)
+{
+ unsigned long flags;
+ u32 value;
+
+ raw_spin_lock_irqsave(&irq_lock, flags);
+
+ value = readl(REG(RTL_ICTL_GIMR));
+ value &= ~BIT(i->hwirq);
+ writel(value, REG(RTL_ICTL_GIMR));
+
+ raw_spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static struct irq_chip realtek_ictl_irq = {
+ .name = "realtek-rtl-intc",
+ .irq_mask = realtek_ictl_mask_irq,
+ .irq_unmask = realtek_ictl_unmask_irq,
+};
+
+static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops irq_domain_ops = {
+ .map = intc_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static void realtek_irq_dispatch(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irq_domain *domain;
+ unsigned int pending;
+
+ chained_irq_enter(chip, desc);
+ pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR));
+ if (unlikely(!pending)) {
+ spurious_interrupt();
+ goto out;
+ }
+ domain = irq_desc_get_handler_data(desc);
+ generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
+
+out:
+ chained_irq_exit(chip, desc);
+}
+
+/*
+ * SoC interrupts are cascaded to MIPS CPU interrupts according to the
+ * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
+ * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
+ * thus go into 4 IRRs.
+ */
+static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
+{
+ struct device_node *cpu_ictl;
+ const __be32 *imap;
+ u32 imaplen, soc_int, cpu_int, tmp, regs[4];
+ int ret, i, irr_regs[] = {
+ RTL_ICTL_IRR3,
+ RTL_ICTL_IRR2,
+ RTL_ICTL_IRR1,
+ RTL_ICTL_IRR0,
+ };
+ u8 mips_irqs_set;
+
+ ret = of_property_read_u32(node, "#address-cells", &tmp);
+ if (ret || tmp)
+ return -EINVAL;
+
+ imap = of_get_property(node, "interrupt-map", &imaplen);
+ if (!imap || imaplen % 3)
+ return -EINVAL;
+
+ mips_irqs_set = 0;
+ memset(regs, 0, sizeof(regs));
+ for (i = 0; i < imaplen; i += 3 * sizeof(u32)) {
+ soc_int = be32_to_cpup(imap);
+ if (soc_int > 31)
+ return -EINVAL;
+
+ cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1));
+ if (!cpu_ictl)
+ return -EINVAL;
+ ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
+ if (ret || tmp != 1)
+ return -EINVAL;
+ of_node_put(cpu_ictl);
+
+ cpu_int = be32_to_cpup(imap + 2);
+ if (cpu_int > 7)
+ return -EINVAL;
+
+ if (!(mips_irqs_set & BIT(cpu_int))) {
+ irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch,
+ domain);
+ mips_irqs_set |= BIT(cpu_int);
+ }
+
+ regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32;
+ imap += 3;
+ }
+
+ for (i = 0; i < 4; i++)
+ writel(regs[i], REG(irr_regs[i]));
+
+ return 0;
+}
+
+static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
+{
+ struct irq_domain *domain;
+ int ret;
+
+ realtek_ictl_base = of_iomap(node, 0);
+ if (!realtek_ictl_base)
+ return -ENXIO;
+
+ /* Disable all cascaded interrupts */
+ writel(0, REG(RTL_ICTL_GIMR));
+
+ domain = irq_domain_add_simple(node, 32, 0,
+ &irq_domain_ops, NULL);
+
+ ret = map_interrupts(node, domain);
+ if (ret) {
+ pr_err("invalid interrupt map\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+IRQCHIP_DECLARE(realtek_rtl_intc, "realtek,rtl-intc", realtek_rtl_of_init);

39
target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch Normal file
View File

@@ -0,0 +1,39 @@
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -23,6 +23,7 @@ platform-$(CONFIG_PIC32MZDA) += pic32/
platform-$(CONFIG_MACH_PISTACHIO) += pistachio/
platform-$(CONFIG_RALINK) += ralink/
platform-$(CONFIG_MIKROTIK_RB532) += rb532/
+platform-$(CONFIG_RTL838X) += rtl838x/
platform-$(CONFIG_SGI_IP22) += sgi-ip22/
platform-$(CONFIG_SGI_IP27) += sgi-ip27/
platform-$(CONFIG_SGI_IP28) += sgi-ip22/
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -627,6 +627,26 @@ config RALINK
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
+config RTL838X
+ bool "Realtek based platforms"
+ select DMA_NONCOHERENT
+ select IRQ_MIPS_CPU
+ select CSRC_R4K
+ select CEVT_R4K
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_MIPS16
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_EARLY_PRINTK_8250
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select BOOT_RAW
+ select PINCTRL
+ select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
+ select USE_OF
+
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC_MEMORY

25
target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch Normal file
View File

@@ -0,0 +1,25 @@
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -508,6 +508,12 @@ config GPIO_REG
A 32-bit single register GPIO fixed in/out implementation. This
can be used to represent any register as a set of GPIO signals.
+config GPIO_RTL8231
+ tristate "RTL8231 GPIO"
+ depends on RTL838X
+ help
+ Say yes here to support Realtek RTL8231 GPIO expansion chips.
+
config GPIO_SAMA5D2_PIOBU
tristate "SAMA5D2 PIOBU GPIO support"
depends on MFD_SYSCON
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -126,6 +126,7 @@ obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
obj-$(CONFIG_GPIO_REG) += gpio-reg.o
+obj-$(CONFIG_GPIO_RTL8231) += gpio-rtl8231.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o

28
target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch Normal file
View File

@@ -0,0 +1,28 @@
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -126,6 +126,15 @@ config RDA_TIMER
help
Enables the support for the RDA Micro timer driver.
+config RTL9300_TIMER
+ bool "Clocksource/timer for the Realtek RTL9300 family of SoCs"
+ depends on MIPS
+ select COMMON_CLK
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Enables support for the Realtek RTL9300 timer driver.
+
config SUN4I_TIMER
bool "Sun4i timer driver" if COMPILE_TEST
depends on HAS_IOMEM
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_MILBEAUT_TIMER) += timer-mi
obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o
obj-$(CONFIG_RDA_TIMER) += timer-rda.o
+obj-$(CONFIG_RTL9300_TIMER) += timer-rtl9300.o
obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o

13
target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch Normal file
View File

@@ -0,0 +1,13 @@
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -491,8 +491,8 @@ config GPIO_RDA
config GPIO_REALTEK_OTTO
tristate "Realtek Otto GPIO support"
- depends on MACH_REALTEK_RTL
- default MACH_REALTEK_RTL
+ depends on RTL838X
+ default RTL838X
select GPIO_GENERIC
select GPIOLIB_IRQCHIP
help

11
target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch Normal file
View File

@@ -0,0 +1,11 @@
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -94,7 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
-obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
+obj-$(CONFIG_RTL838X) += spi-realtek-rtl.o
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o

8
target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch Normal file
View File

@@ -0,0 +1,8 @@
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -114,4 +114,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-l
obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o
obj-$(CONFIG_MST_IRQ) += irq-mst-intc.o
obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o
-obj-$(CONFIG_MACH_REALTEK_RTL) += irq-realtek-rtl.o
+obj-$(CONFIG_RTL838X) += irq-realtek-rtl.o

25
target/linux/realtek/patches-5.10/306-gpio-add-legacy-rtl838x-driver.patch Normal file
View File

@@ -0,0 +1,25 @@
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -514,6 +514,12 @@ config GPIO_RTL8231
help
Say yes here to support Realtek RTL8231 GPIO expansion chips.
+config GPIO_RTL838X
+ tristate "RTL838X GPIO"
+ depends on RTL838X
+ help
+ Say yes here to support RTL838X GPIO on RTL93xx SoCs.
+
config GPIO_SAMA5D2_PIOBU
tristate "SAMA5D2 PIOBU GPIO support"
depends on MFD_SYSCON
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -127,6 +127,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc3
obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
obj-$(CONFIG_GPIO_REG) += gpio-reg.o
obj-$(CONFIG_GPIO_RTL8231) += gpio-rtl8231.o
+obj-$(CONFIG_GPIO_RTL838X) += gpio-rtl838x.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o

18
target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch Normal file
View File

@@ -0,0 +1,18 @@
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -67,6 +67,8 @@ config NET_DSA_QCA8K
This enables support for the Qualcomm Atheros QCA8K Ethernet
switch chips.
+source "drivers/net/dsa/rtl83xx/Kconfig"
+
config NET_DSA_REALTEK_SMI
tristate "Realtek SMI Ethernet switch family support"
depends on NET_DSA
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -23,3 +23,4 @@ obj-y += mv88e6xxx/
obj-y += ocelot/
obj-y += qca/
obj-y += sja1105/
+obj-y += rtl83xx/

40
target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch Normal file
View File

@@ -0,0 +1,40 @@
--- a/net/dsa/tag_trailer.c
+++ b/net/dsa/tag_trailer.c
@@ -17,7 +17,12 @@ static struct sk_buff *trailer_xmit(stru
trailer = skb_put(skb, 4);
trailer[0] = 0x80;
+
+#ifdef CONFIG_NET_DSA_RTL83XX
+ trailer[1] = dp->index;
+#else
trailer[1] = 1 << dp->index;
+#endif /* CONFIG_NET_DSA_RTL838X */
trailer[2] = 0x10;
trailer[3] = 0x00;
@@ -34,12 +39,23 @@ static struct sk_buff *trailer_rcv(struc
return NULL;
trailer = skb_tail_pointer(skb) - 4;
+
+#ifdef CONFIG_NET_DSA_RTL83XX
+ if (trailer[0] != 0x80 || (trailer[1] & 0x80) != 0x00 ||
+ (trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00)
+ return NULL;
+
+ if (trailer[1] & 0x40)
+ skb->offload_fwd_mark = 1;
+
+ source_port = trailer[1] & 0x3f;
+#else
if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
(trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00)
return NULL;
source_port = trailer[1] & 7;
-
+#endif
skb->dev = dsa_master_find_slave(dev, 0, source_port);
if (!skb->dev)
return NULL;

11
target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch Normal file
View File

@@ -0,0 +1,11 @@
--- a/include/linux/platform_data/dsa.h
+++ b/include/linux/platform_data/dsa.h
@@ -6,7 +6,7 @@ struct device;
struct net_device;
#define DSA_MAX_SWITCHES 4
-#define DSA_MAX_PORTS 12
+#define DSA_MAX_PORTS 54
#define DSA_RTABLE_NONE -1
struct dsa_chip_data {

26
target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch Normal file
View File

@@ -0,0 +1,26 @@
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -162,6 +162,13 @@ source "drivers/net/ethernet/rdc/Kconfig
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rocker/Kconfig"
+
+config NET_RTL838X
+ tristate "Realtek rtl838x Ethernet MAC support"
+ depends on RTL838X
+ help
+ Say Y here if you want to use the Realtek rtl838x Gbps Ethernet MAC.
+
source "drivers/net/ethernet/samsung/Kconfig"
source "drivers/net/ethernet/seeq/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real
obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/
+obj-$(CONFIG_NET_RTL838X) += rtl838x_eth.o
obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/
obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
obj-$(CONFIG_NET_VENDOR_SILAN) += silan/

13
target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch Normal file
View File

@@ -0,0 +1,13 @@
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -881,6 +881,10 @@ struct phy_driver {
int (*get_sqi)(struct phy_device *dev);
/** @get_sqi_max: Get the maximum signal quality indication */
int (*get_sqi_max)(struct phy_device *dev);
+ int (*get_port)(struct phy_device *dev);
+ int (*set_port)(struct phy_device *dev, int port);
+ int (*get_eee)(struct phy_device *dev, struct ethtool_eee *e);
+ int (*set_eee)(struct phy_device *dev, struct ethtool_eee *e);
};
#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
struct phy_driver, mdiodrv)

40
target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch Normal file
View File

@@ -0,0 +1,40 @@
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1425,6 +1425,11 @@ int phylink_ethtool_ksettings_set(struct
* the presence of a PHY, this should not be changed as that
* should be determined from the media side advertisement.
*/
+ if (pl->phydev->drv->get_port && pl->phydev->drv->set_port) {
+ if(pl->phydev->drv->get_port(pl->phydev) != kset->base.port) {
+ pl->phydev->drv->set_port(pl->phydev, kset->base.port);
+ }
+ }
return phy_ethtool_ksettings_set(pl->phydev, kset);
}
@@ -1726,8 +1731,11 @@ int phylink_ethtool_get_eee(struct phyli
ASSERT_RTNL();
- if (pl->phydev)
+ if (pl->phydev) {
+ if (pl->phydev->drv->get_eee)
+ return pl->phydev->drv->get_eee(pl->phydev, eee);
ret = phy_ethtool_get_eee(pl->phydev, eee);
+ }
return ret;
}
@@ -1744,8 +1752,11 @@ int phylink_ethtool_set_eee(struct phyli
ASSERT_RTNL();
- if (pl->phydev)
+ if (pl->phydev) {
+ if (pl->phydev->drv->set_eee)
+ return pl->phydev->drv->set_eee(pl->phydev, eee);
ret = phy_ethtool_set_eee(pl->phydev, eee);
+ }
return ret;
}

19
target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch Normal file
View File

@@ -0,0 +1,19 @@
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -133,6 +133,7 @@ typedef enum {
PHY_INTERFACE_MODE_XGMII,
PHY_INTERFACE_MODE_XLGMII,
PHY_INTERFACE_MODE_MOCA,
+ PHY_INTERFACE_MODE_HSGMII,
PHY_INTERFACE_MODE_QSGMII,
PHY_INTERFACE_MODE_TRGMII,
PHY_INTERFACE_MODE_1000BASEX,
@@ -199,6 +200,8 @@ static inline const char *phy_modes(phy_
return "xlgmii";
case PHY_INTERFACE_MODE_MOCA:
return "moca";
+ case PHY_INTERFACE_MODE_HSGMII:
+ return "hsgmii";
case PHY_INTERFACE_MODE_QSGMII:
return "qsgmii";
case PHY_INTERFACE_MODE_TRGMII:

25
target/linux/realtek/patches-5.10/705-add-rtl-phy.patch Normal file
View File

@@ -0,0 +1,25 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -324,6 +324,12 @@ config REALTEK_PHY
help
Supports the Realtek 821x PHY.
+config REALTEK_SOC_PHY
+ tristate "Realtek SoC PHYs"
+ depends on RTL838X
+ help
+ Supports the PHYs found in combination with Realtek Switch SoCs
+
config RENESAS_PHY
tristate "Renesas PHYs"
help
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -86,6 +86,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_REALTEK_SOC_PHY) += rtl83xx-phy.o
obj-$(CONFIG_RENESAS_PHY) += uPD60620.o
obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o
obj-$(CONFIG_SMSC_PHY) += smsc.o

11
target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch Normal file
View File

@@ -0,0 +1,11 @@
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -229,7 +229,7 @@ static inline const char *phy_modes(phy_
#define PHY_INIT_TIMEOUT 100000
#define PHY_FORCE_TIMEOUT 10
-#define PHY_MAX_ADDR 32
+#define PHY_MAX_ADDR 64
/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
#define PHY_ID_FMT "%s:%02x"