domenico/openwrt-kernel5.4-nss-qsdk10.0
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
domenico
2025-06-24 13:14:22 +02:00
commit 4002f145fc
9002 changed files with 1731834 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

74
target/linux/rockchip/patches-5.10/002-net-usb-r8152-add-LED-configuration-from-OF.patch Normal file
View File

@@ -0,0 +1,74 @@
From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Sun, 26 Jul 2020 02:38:31 +0200
Subject: [PATCH] net: usb: r8152: add LED configuration from OF
This adds the ability to configure the LED configuration register using
OF. This way, the correct value for board specific LED configuration can
be determined.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -11,6 +11,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/usb.h>
+#include <linux/of.h>
#include <linux/crc32.h>
#include <linux/if_vlan.h>
#include <linux/uaccess.h>
@@ -5301,6 +5302,22 @@ static void rtl_tally_reset(struct r8152
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
}
+static int r8152_led_configuration(struct r8152 *tp)
+{
+ u32 led_data;
+ int ret;
+
+ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
+ &led_data);
+
+ if (ret)
+ return ret;
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
+
+ return 0;
+}
+
static void r8152b_init(struct r8152 *tp)
{
u32 ocp_data;
@@ -5342,6 +5359,8 @@ static void r8152b_init(struct r8152 *tp
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+ r8152_led_configuration(tp);
}
static void r8153_init(struct r8152 *tp)
@@ -5487,6 +5506,8 @@ static void r8153_init(struct r8152 *tp)
tp->coalesce = COALESCE_SLOW;
break;
}
+
+ r8152_led_configuration(tp);
}
static void r8153b_init(struct r8152 *tp)
@@ -5573,6 +5594,8 @@ static void r8153b_init(struct r8152 *tp
rtl_tally_reset(tp);
tp->coalesce = 15000; /* 15 us */
+
+ r8152_led_configuration(tp);
}
static int rtl8152_pre_reset(struct usb_interface *intf)

54
target/linux/rockchip/patches-5.10/003-dt-bindings-net-add-RTL8152-binding-documentation.patch Normal file
View File

@@ -0,0 +1,54 @@
From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Sun, 26 Jul 2020 15:30:33 +0200
Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation
Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
adapters.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
.../bindings/net/realtek,rtl8152.yaml | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL8152/RTL8153 series USB ethernet
+
+maintainers:
+ - David Bauer <mail@david-bauer.net>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - realtek,rtl8152
+ - realtek,rtl8153
+
+ reg:
+ description: The device number on the USB bus
+
+ realtek,led-data:
+ description: Value to be written to the LED configuration register.
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ usb-eth@2 {
+ compatible = "realtek,rtl8153";
+ reg = <2>;
+ realtek,led-data = <0x87>;
+ };
\ No newline at end of file

177
target/linux/rockchip/patches-5.10/004-v5.13-rockchip-rk3399-Add-support-for-FriendlyARM-NanoPi-R.patch Normal file
View File

@@ -0,0 +1,177 @@
From db792e9adbf85ffc9d6b0b060ac3c8e3148c8992 Mon Sep 17 00:00:00 2001
From: Tianling Shen <cnsztl@gmail.com>
Date: Fri, 19 Mar 2021 13:16:27 +0800
Subject: [PATCH] rockchip: rk3399: Add support for FriendlyARM NanoPi R4S
This adds support for the NanoPi R4S from FriendlyArm.
Rockchip RK3399 SoC
1GB DDR3 or 4GB LPDDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Ethernet (PCIe) (LAN)
USB 3.0 Port x 2
MicroSD slot
Reset button
WAN - LAN - SYS LED
Co-developed-by: Jensen Huang <jensenhuang@friendlyarm.com>
Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
[minor adjustments]
Co-developed-by: Marty Jones <mj8263788@gmail.com>
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[further adjustments, fixed format issues]
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20210319051627.814-2-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 133 +++++++++++++++++++++
2 files changed, 134 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-le
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ *
+ * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
+ * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
+ * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi R4S";
+ compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+ /delete-node/ display-subsystem;
+
+ gpio-leds {
+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+
+ /delete-node/ led-0;
+
+ lan_led: led-lan {
+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ label = "green:lan";
+ };
+
+ sys_led: led-sys {
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ label = "red:sys";
+ default-state = "on";
+ };
+
+ wan_led: led-wan {
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ label = "green:wan";
+ };
+ };
+
+ gpio-keys {
+ pinctrl-0 = <&reset_button_pin>;
+
+ /delete-node/ power;
+
+ reset {
+ debounce-interval = <50>;
+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&emmc_phy {
+ status = "disabled";
+};
+
+&i2c4 {
+ status = "disabled";
+};
+
+&pcie0 {
+ max-link-speed = <1>;
+ num-lanes = <1>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+};
+
+&pinctrl {
+ gpio-leds {
+ /delete-node/ status-led-pin;
+
+ lan_led_pin: lan-led-pin {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sys_led_pin: sys-led-pin {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wan_led_pin: wan-led-pin {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rockchip-key {
+ /delete-node/ power-key;
+
+ reset_button_pin: reset-button-pin {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&sdhci {
+ status = "disabled";
+};
+
+&sdio0 {
+ status = "disabled";
+};
+
+&u2phy0_host {
+ phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+ status = "disabled";
+};
+
+&uart0 {
+ status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_sys>;
+};

31
target/linux/rockchip/patches-5.10/005-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch Normal file
View File

@@ -0,0 +1,31 @@
From af20b3384e8723077cc6484160b0cf4e9be321de Mon Sep 17 00:00:00 2001
From: Tianling Shen <cnsztl@gmail.com>
Date: Mon, 7 Jun 2021 15:45:37 +0800
Subject: [PATCH] arm64: dts: rockchip: add EEPROM node for NanoPi R4S
NanoPi R4S has a EEPROM attached to the 2nd I2C bus (U92), which
stores the MAC address.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -68,6 +68,15 @@
status = "disabled";
};
+&i2c2 {
+ eeprom@51 {
+ compatible = "microchip,24c02", "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ read-only; /* This holds our MAC */
+ };
+};
+
&i2c4 {
status = "disabled";
};

31
target/linux/rockchip/patches-5.10/100-rockchip-use-system-LED-for-OpenWrt.patch Normal file
View File

@@ -0,0 +1,31 @@
From 6731d2c9039fbe1ecf21915eab3acee0a999508a Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Fri, 10 Jul 2020 21:38:20 +0200
Subject: [PATCH] rockchip: use system LED for OpenWrt
Use the SYS LED on the casing for showing system status.
This patch is kept separate from the NanoPi R2S support patch, as i plan
on submitting the device support upstream.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -13,6 +13,13 @@
model = "FriendlyElec NanoPi R2S";
compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+ aliases {
+ led-boot = &sys_led;
+ led-failsafe = &sys_led;
+ led-running = &sys_led;
+ led-upgrade = &sys_led;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};

70
target/linux/rockchip/patches-5.10/101-dts-rockchip-add-usb3-controller-node-for-RK3328-SoCs.patch Normal file
View File

@@ -0,0 +1,70 @@
From: William Wu <william.wu@rock-chips.com>
RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
---
NOTE: This binding still has issues. From the original thread:
the rk3328 usb3-phy has an issue with detecting any plugin events
after a previous device got removed - see the inno-usb3-phy driver
in the vendor kernel.
The current state is good-enough for enabling the USB3 attached LAN
port of the NanoPi R2S. However, it might explode depending on your
use-case. You've been warned.
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 ++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -985,22 +985,30 @@
};
usbdrd3: usb@ff600000 {
- compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
- reg = <0x0 0xff600000 0x0 0x100000>;
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
<&cru ACLK_USB3OTG>;
clock-names = "ref_clk", "suspend_clk",
"bus_clk";
- dr_mode = "otg";
- phy_type = "utmi_wide";
- snps,dis-del-phy-power-chg-quirk;
- snps,dis_enblslpm_quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis_u2_susphy_quirk;
- snps,dis_u3_susphy_quirk;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
status = "disabled";
+
+ usbdrd_dwc3: dwc3@ff600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ status = "disabled";
+ };
};
gic: interrupt-controller@ff811000 {

60
target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch Normal file
View File

@@ -0,0 +1,60 @@
From 0fc3b9b7619c4878f73a6a7989863f0d1a3fd392 Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Fri, 10 Jul 2020 21:12:16 +0200
Subject: [PATCH] rockchip: enabled LAN port on NanoPi R2S
Enable the USB3 port on the FriendlyARM NanoPi R2S.
This is required for the USB3 attached LAN port to work.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -44,6 +44,18 @@
};
};
+ vcc_rtl8153: vcc-rtl8153-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8153_en_drv>;
+ regulator-always-on;
+ regulator-name = "vcc_rtl8153";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
@@ -271,6 +283,12 @@
};
};
};
+
+ usb {
+ rtl8153_en_drv: rtl8153-en-drv {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&io_domains {
@@ -377,3 +395,12 @@
&usb_host0_ohci {
status = "okay";
};
+
+&usbdrd3 {
+ status = "okay";
+};
+
+&usbdrd_dwc3 {
+ dr_mode = "host";
+ status = "okay";
+};

28
target/linux/rockchip/patches-5.10/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch Normal file
View File

@@ -0,0 +1,28 @@
From 2795c8b31a686bdb8338f9404d18ef7a154f0d75 Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Sun, 26 Jul 2020 13:32:59 +0200
Subject: [PATCH] arm64: rockchip: add OF node for USB eth on NanoPi R2S
This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
NanoPi R2S. Add the correct value for the RTL8153 LED configuration
register to match the blink behavior of the other port on the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -403,4 +403,11 @@
&usbdrd_dwc3 {
dr_mode = "host";
status = "okay";
+
+ usb-eth@2 {
+ compatible = "realtek,rtl8153";
+ reg = <2>;
+
+ realtek,led-data = <0x87>;
+ };
};

32
target/linux/rockchip/patches-5.10/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch Normal file
View File

@@ -0,0 +1,32 @@
From e12f67fe83446432ef16704c22ec23bd1dbcd094 Mon Sep 17 00:00:00 2001
From: Vicente Bergas <vicencb@gmail.com>
Date: Tue, 1 Dec 2020 16:41:32 +0100
Subject: arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4
Based on the board schematics at
https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf
on page 19 there is an USB Type-A receptacle being used as an USB-OTG port.
But the Type-A connector is not valid for OTG operation, for this reason
there is a switch to select host or device role.
This is non-compliant and error prone because switching is manual.
So, use host mode as it corresponds for a Type-A receptacle.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Link: https://lore.kernel.org/r/20201201154132.1286-4-vicencb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -680,7 +680,7 @@
&usbdrd_dwc3_0 {
status = "okay";
- dr_mode = "otg";
+ dr_mode = "host";
};
&usbdrd3_1 {