Initial commit

target/linux/x86/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,141 @@
+RAMFS_COPY_BIN='grub-bios-setup'
+
+platform_check_image() {
+	local diskdev partdev diff
+	[ "$#" -gt 1 ] && return 1
+
+	case "$(get_magic_word "$1")" in
+		eb48|eb63) ;;
+		*)
+			v "Invalid image type"
+			return 1
+		;;
+	esac
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		v "Unable to determine upgrade device"
+		return 1
+	}
+
+	get_partitions "/dev/$diskdev" bootdisk
+
+	v "Extract boot sector from the image"
+	get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
+
+	get_partitions /tmp/image.bs image
+
+	#compare tables
+	diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+
+	rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
+
+	if [ -n "$diff" ]; then
+		v "Partition layout has changed. Full image will be written."
+		ask_bool 0 "Abort" && exit 1
+		return 0
+	fi
+}
+
+platform_copy_config() {
+	local partdev parttype=ext4
+
+	if export_partdevice partdev 1; then
+		part_magic_fat "/dev/$partdev" && parttype=vfat
+		mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
+		cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+		umount /mnt
+	fi
+}
+
+platform_do_bootloader_upgrade() {
+	local bootpart parttable=msdos
+	local diskdev="$1"
+
+	if export_partdevice bootpart 1; then
+		mkdir -p /tmp/boot
+		mount -o rw,noatime "/dev/$bootpart" /tmp/boot
+		echo "(hd0) /dev/$diskdev" > /tmp/device.map
+		part_magic_efi "/dev/$diskdev" && parttable=gpt
+
+		v "Upgrading bootloader on /dev/$diskdev..."
+		grub-bios-setup \
+			-m "/tmp/device.map" \
+			-d "/tmp/boot/boot/grub" \
+			-r "hd0,${parttable}1" \
+			"/dev/$diskdev" \
+		&& touch /tmp/boot/boot/grub/upgraded
+
+        case "$(board_name)" in
+        cisco-mx100-hw)
+            # If the MX100 is booted UEFI AND the SATA HDD exists, we need to change
+            # grub's root= to hd1 for it to boot correctly, otherwise we can keep it hd0.
+            if [ -d /sys/firmware/efi ] && [ "$(ls -a /dev/sd[a-z] | wc -w)" -gt 1 ] ; then
+                sed -i "s|hd0,${parttable}1|hd1,${parttable}1|g" /tmp/boot/boot/grub/grub.cfg
+            fi
+            ;;
+        esac
+
+		umount /tmp/boot
+	fi
+}
+
+platform_do_upgrade() {
+	local diskdev partdev diff
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		v "Unable to determine upgrade device"
+		return 1
+	}
+
+	sync
+
+	if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
+		get_partitions "/dev/$diskdev" bootdisk
+
+		v "Extract boot sector from the image"
+		get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
+
+		get_partitions /tmp/image.bs image
+
+		#compare tables
+		diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+	else
+		diff=1
+	fi
+
+	if [ -n "$diff" ]; then
+		get_image_dd "$1" of="/dev/$diskdev" bs=4096 conv=fsync
+
+		# Separate removal and addtion is necessary; otherwise, partition 1
+		# will be missing if it overlaps with the old partition 2
+		partx -d - "/dev/$diskdev"
+		partx -a - "/dev/$diskdev"
+
+		return 0
+	fi
+
+	#iterate over each partition from the image and write it to the boot disk
+	while read part start size; do
+		if export_partdevice partdev $part; then
+			v "Writing image to /dev/$partdev..."
+			get_image_dd "$1" of="/dev/$partdev" ibs=512 obs=1M skip="$start" count="$size" conv=fsync
+		else
+			v "Unable to find partition $part device, skipped."
+		fi
+	done < /tmp/partmap.image
+
+	v "Writing new UUID to /dev/$diskdev..."
+	get_image_dd "$1" of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
+
+	platform_do_bootloader_upgrade "$diskdev"
+	local parttype=ext4
+	part_magic_efi "/dev/$diskdev" || return 0
+
+	if export_partdevice partdev 1; then
+		part_magic_fat "/dev/$partdev" && parttype=vfat
+		mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
+		set -- $(dd if="/dev/$diskdev" bs=1 skip=1168 count=16 2>/dev/null | hexdump -v -e '8/1 "%02x "" "2/1 "%02x""-"6/1 "%02x"')
+		sed -i "s/\(PARTUUID=\)[a-f0-9-]\+/\1$4$3$2$1-$6$5-$8$7-$9/ig" /mnt/boot/grub/grub.cfg
+		umount /mnt
+	fi
+}