Initial commit

package/network/config/ltq-vdsl-vr11-app/files/dsl_control

@@ -0,0 +1,265 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2012 OpenWrt.org
+
+START=97
+USE_PROCD=1
+
+dslstat() {
+	ubus call dsl metrics
+}
+
+extra_command "dslstat" "Get DSL status information"
+
+#
+# ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
+# ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable (VECTORMODE_ENABLE))
+#
+# G.992.1 Annex A
+# G.992.2 Annex A
+# G.992.3 Annex A / L-US1 / L_US-2 / M
+# G.992.5 Annex A / M
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_a="05_01_04_00_4C_01_04_07"
+
+# G.992.1 Annex B
+# G.992.3 Annex B
+# G.992.5 Annex B
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_b="10_00_10_00_00_04_00_07"
+
+# G.992.1 Annex B
+# G.992.3 Annex B
+# G.992.3 Annex J
+# G.992.5 Annex B
+# G.992.5 Annex J
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_j="10_00_10_40_00_04_01_07"
+
+# G.992.1 Annex B
+xtse_xdsl_bdmt="10_00_00_00_00_00_00_00"
+
+# G.992.3 Annex B
+xtse_xdsl_b2="00_00_10_00_00_00_00_00"
+
+# G.992.5 Annex B
+xtse_xdsl_b2p="00_00_00_00_00_04_00_00"
+
+# ANSI T1.413
+xtse_xdsl_at1="01_00_00_00_00_00_00_00"
+
+# G.992.2 Annex A
+xtse_xdsl_alite="00_01_00_00_00_00_00_00"
+
+# G.992.1 Annex A
+xtse_xdsl_admt="04_00_00_00_00_00_00_00"
+
+# G.992.3 Annex A
+xtse_xdsl_a2="00_00_04_00_00_00_00_00"
+
+# G.992.5 Annex A
+xtse_xdsl_a2p="00_00_00_00_00_01_00_00"
+
+# G.992.3 Annex L
+xtse_xdsl_l="00_00_00_00_0C_00_00_00"
+
+# G.992.3 Annex M
+# G.992.5 Annex M
+xtse_xdsl_m="00_00_00_00_40_00_04_00"
+
+# G.992.3 Annex M
+xtse_xdsl_m2="00_00_00_00_40_00_00_00"
+
+# G.992.5 Annex M
+xtse_xdsl_m2p="00_00_00_00_00_00_04_00"
+
+#
+# ITU-T G.994.1 (06/2012) - Table 2 (Mandatory carrier sets)
+#
+
+# A43
+tone_adsl_a="0x142" # A43C + J43 + A43
+tone_vdsl_a="0x142" # A43C + J43 + A43
+
+# A43 + V43
+tone_adsl_av="0x142" # A43C + J43 + A43
+tone_vdsl_av="0x146" # A43C + J43 + A43 + V43
+
+# B43
+tone_adsl_b="0x81" # B43 + B43c
+tone_vdsl_b="0x1" # B43
+
+# B43 + V43
+tone_adsl_bv="0x81" # B43 + B43c
+tone_vdsl_bv="0x5" # B43 + V43
+
+# create DSL autoboot script. Used for SNR margin tweak and to set MAC address for vectoring error reports
+autoboot_script() {
+    echo "[WaitForConfiguration]={
+locs nLine=0 0 $1
+dsmmcs nLine=0 $2
+}
+
+[WaitForLinkActivate]={
+}
+
+[WaitForRestart]={
+}
+
+[Common]={
+}" > /tmp/dsl.scr
+}
+
+lowlevel_cfg() {
+	echo "# VRX Low Level Configuration File
+#
+# Parameters must be separated by tabs or spaces.
+# Empty lines and comments will be ignored.
+#
+
+# nFilter
+#
+# NA     = -1
+# OFF    = 0
+# ISDN   = 1
+# POTS   = 2
+# POTS_2 = 3
+# POTS_3 = 4
+#
+#  (dec)
+    -1
+
+# nHsToneGroupMode nHsToneGroup_A       nHsToneGroup_V    nHsToneGroup_AV
+#
+# NA     = -1      NA         = -1      see               see
+# AUTO   = 0       VDSL2_B43  = 0x0001  nHsToneGroup_A    nHsToneGroup_A
+# MANUAL = 1       VDSL2_A43  = 0x0002
+#                  VDSL2_V43  = 0x0004
+#                  VDSL1_V43P = 0x0008
+#                  VDSL1_V43I = 0x0010
+#                  ADSL1_C43  = 0x0020
+#                  ADSL2_J43  = 0x0040
+#                  ADSL2_B43C = 0x0080
+#                  ADSL2_A43C = 0x0100
+#
+#  (dec)           (hex)                (hex)             (hex)
+     1             $1			$2		 0x0
+
+#   nBaseAddr     nIrqNum
+#
+#     (hex)        (dec)
+    0x1e116000      63
+
+# nUtopiaPhyAdr   nUtopiaBusWidth      nPosPhyParity
+#                 default(16b) = 0     NA   = -1
+#                 8-bit        = 1     ODD  = 0
+#                 16-bit       = 2
+#
+#
+#    (hex)            (dec)                (dec)
+      0xFF              0                    0
+
+# bNtrEnable
+#
+#  (dec)
+    0" > /tmp/lowlevel.cfg
+}
+
+get_macaddr() {
+	local name
+	config_get name $1 name
+	[ "$name" = "dsl0" ] && config_get $2 $1 macaddr
+}
+
+service_triggers() {
+	procd_add_reload_trigger network
+}
+
+start_service() {
+	local annex
+	local firmware
+	local tone
+	local tone_adsl
+	local tone_vdsl
+	local xtse
+	local xfer_mode
+	local line_mode
+	local tc_layer
+	local mode
+	local lowlevel
+	local snr
+	local macaddr
+
+	config_load network
+	config_get tone dsl tone
+	config_get annex dsl annex
+	config_get firmware dsl firmware
+	config_get xfer_mode dsl xfer_mode
+	config_get line_mode dsl line_mode
+	config_get snr dsl ds_snr_offset
+	config_foreach get_macaddr device macaddr
+
+	eval "xtse=\"\${xtse_xdsl_$annex}\""
+
+	case "${xfer_mode}" in
+	atm)
+		tc_layer="-T1:0x1:0x1_1:0x1:0x1"
+		;;
+	ptm)
+		tc_layer="-T2:0x1:0x1_2:0x1:0x1"
+		;;
+	esac
+
+	case "${line_mode}" in
+	adsl)
+		mode="-M1"
+
+		# mask out VDSL bits when ADSL is requested
+		xtse="${xtse%_*}_00"
+		;;
+	vdsl)
+		mode="-M2"
+
+		# mask out ADSL bits when VDSL is requested
+		xtse="00_00_00_00_00_00_00_${xtse##*_}"
+		;;
+	esac
+
+	[ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
+	[ -f "${firmware}" ] || {
+		echo failed to find $firmware
+		return 1
+	}
+
+	eval "tone_adsl=\"\${tone_adsl_$tone}\""
+	eval "tone_vdsl=\"\${tone_vdsl_$tone}\""
+	[ -n "${tone_adsl}" ] && [ -n "${tone_vdsl}" ] && {
+		lowlevel_cfg "${tone_adsl}" "${tone_vdsl}"
+		lowlevel="-l /tmp/lowlevel.cfg"
+	}
+
+	[ -z "${snr}" ] && snr=0
+	[ -z "${macaddr}" ] && macaddr="00:00:00:00:00:00"
+	autoboot_script "$snr" "$macaddr"
+	autoboot="-a /tmp/dsl.scr -A /tmp/dsl.scr"
+
+	procd_open_instance
+	procd_set_param command /sbin/vdsl_cpe_control \
+			-i$xtse \
+			-n /sbin/dsl_notify.sh \
+			-f ${firmware} \
+			$lowlevel \
+			${mode} \
+			${tc_layer} \
+			$autoboot
+	procd_set_param term_timeout 10
+	procd_close_instance
+}
+
+stop_service() {
+	DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
+	DSL_INTERFACE_STATUS="DOWN" \
+		/sbin/dsl_notify.sh
+}

package/network/config/ltq-vdsl-vr11-app/files/dsl_cpe_pipe.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+pipe_no=0
+
+# use specified pipe no
+case "$1" in
+0|1|2)
+pipe_no=$1; shift; ;;
+esac
+
+
+#echo "Call dsl_pipe with $*"
+lock /var/lock/dsl_pipe
+echo $* > /tmp/pipe/dsl_cpe${pipe_no}_cmd
+result=$(cat /tmp/pipe/dsl_cpe${pipe_no}_ack)
+lock -u /var/lock/dsl_pipe
+
+echo "$result"