Initial commit

target/linux/armsr/base-files/etc/board.d/01_led

@@ -0,0 +1,19 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+	ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
+	ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/armsr/base-files/etc/board.d/02_network

@@ -0,0 +1,18 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	traverse,ten64)
+		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
+		ucidef_set_interface_wan "eth6"
+		;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/armsr/base-files/etc/board.d/03_gpio_switches

@@ -0,0 +1,31 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+KERNEL_MAJOR=$(uname -r | awk -F '.' '{print $1}')
+KERNEL_MINOR=$(uname -r | awk -F '.' '{print $2}')
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+	if [ "${KERNEL_MAJOR}" -ge "6" ] && [ "${KERNEL_MINOR}" -ge "6" ]; then
+		I2C_GPIO_BASE=640
+	else
+		I2C_GPIO_BASE=368
+	fi
+	ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "$(($I2C_GPIO_BASE + 8))"
+	ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "$(($I2C_GPIO_BASE + 9))"
+	ucidef_add_gpio_switch "lte_disable" "Cell Modem Airplane mode" "$((I2C_GPIO_BASE + 10))"
+	ucidef_add_gpio_switch "gnss_disable" "Cell Modem Disable GNSS receiver" "$(($I2C_GPIO_BASE + 11))"
+	ucidef_add_gpio_switch "lower_sfp_txidsable" "Lower SFP+ TX Disable" "$(($I2C_GPIO_BASE + 1))"
+	ucidef_add_gpio_switch "upper_sfp_txdisable" "Upper SFP+ TX Disable" "$(($I2C_GPIO_BASE + 5))"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/armsr/base-files/etc/inittab

@@ -0,0 +1,10 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyAMA0::askfirst:/usr/libexec/login.sh
+@GRUB_SERIAL@::askfirst:/usr/libexec/login.sh
+tty1::askfirst:/usr/libexec/login.sh
+hvc0::askfirst:/usr/libexec/login.sh
+ttymxc0::askfirst:/usr/libexec/login.sh
+ttymxc1::askfirst:/usr/libexec/login.sh
+ttymxc2::askfirst:/usr/libexec/login.sh
+ttySC0::askfirst:/usr/libexec/login.sh

target/linux/armsr/base-files/etc/uci-defaults/05-migrate-ten64-gpio

@@ -0,0 +1,37 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# This script migrates GPIO switch pin numbers
+# from kernel versions prior to 6.6
+# See https://lists.openwrt.org/pipermail/openwrt-devel/2024-March/042448.html
+
+. /lib/functions.sh
+
+ten64_update_gpioswitch_num() {
+	local section="$1"
+	config_get gpio_pin  "${section}" gpio_pin
+	config_get gpio_name "${section}" name
+	if [ -z "${gpio_pin}" ]; then
+		return
+	fi
+	local this_pin_name=$(uci get "system.${section}.name")
+	if [ "${gpio_pin}" -lt 640 ]; then
+		new_pin_value=$(( $gpio_pin + 272 ))
+		uci set "system.${section}.gpio_pin=${new_pin_value}"
+	fi
+}
+
+board=$(board_name)
+if [ "${board}" != "traverse,ten64" ]; then
+	exit 0
+fi
+
+KERNEL_MINOR=$(uname -r | awk -F '.' '{print $2}')
+if [ "${KERNEL_MINOR}" -lt "6" ]; then
+	exit 0
+fi
+
+config_load system
+config_foreach ten64_update_gpioswitch_num gpio_switch
+
+exit 0