Initial commit
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled

This commit is contained in:
domenico
2025-06-24 14:35:53 +02:00
commit c06fb25d1f
9263 changed files with 1750214 additions and 0 deletions

View File

@@ -0,0 +1,158 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/leds/common.h>
#include "ar934x_ruckus_zf73xx.dtsi"
/ {
model = "Ruckus ZoneFlex 7352/7372[-E/-U]";
compatible = "ruckus,zf7372", "qca,ar9344";
leds {
air-green {
label = "green:air";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
air-yellow {
label = "yellow:air";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
dir-green {
label = "green:dir";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
eth1-green {
label = "green:eth1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
power_red: power-red {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
wlan2g-green {
label = "green:wlan2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0assoc";
};
wlan2g-yellow {
label = "yellow:wlan2g";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g-green {
label = "green:wlan5g";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1assoc";
};
wlan5g-yellow {
label = "yellow:wlan5g";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
beamforming-2g-spi {
compatible = "spi-gpio";
mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
sck-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
#address-cells = <1>;
#size-cells = <0>;
beamforming-2g-gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <24000000>;
gpio-controller;
#gpio-cells = <2>;
};
};
beamforming-5g-spi {
compatible = "spi-gpio";
mosi-gpios = <&ath9k 15 GPIO_ACTIVE_HIGH>;
sck-gpios = <&ath9k 14 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
#address-cells = <1>;
#size-cells = <0>;
beamforming-5g-gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <24000000>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
&eth0 {
nvmem-cells = <&macaddr_board_data_6c>;
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_board_data_66>;
nvmem-cell-names = "mac-address";
gmac-config {
device = <&gmac>;
switch-phy-swap = <0>;
switch-only-mode = <1>;
};
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
gpio-controller;
#gpio-cells = <2>;
nvmem-cells = <&macaddr_board_data_76>;
nvmem-cell-names = "mac-address";
};
};
&board_data {
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_board_data_60: macaddr@60 {
reg = <0x60 0x6>;
};
macaddr_board_data_66: macaddr@66 {
reg = <0x66 0x6>;
};
macaddr_board_data_6c: macaddr@6c {
reg = <0x6c 0x6>;
};
macaddr_board_data_76: macaddr@76 {
reg = <0x76 0x6>;
};
cal_board_data_41000: cal@41000 {
reg = <0x41000 0x440>;
};
};
};