Initial commit
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled

This commit is contained in:
domenico
2025-06-24 14:35:53 +02:00
commit c06fb25d1f
9263 changed files with 1750214 additions and 0 deletions

View File

@@ -0,0 +1,161 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "comfast,cf-e355ac-v2", "qca,qca9531";
model = "COMFAST CF-E355AC V2";
aliases {
serial0 = &uart;
led-boot = &led_lan;
led-failsafe = &led_lan;
led-upgrade = &led_lan;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
/* Single RGB led controlled via GPIO */
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
led_lan: lan {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
wlan2g {
color = <LED_COLOR_ID_BLUE>;
function = "LED_FUNCTION_WLAN_2GHZ";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
color = <LED_COLOR_ID_RED>;
function = "LED_FUNCTION_WLAN_5GHZ";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
hw_margin_ms = <1200>;
always-running;
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_art_0 0>;
nvmem-cell-names = "mac-address";
};
&eth1 {
nvmem-cells = <&macaddr_art_0 1>;
nvmem-cell-names = "mac-address";
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&precal_art_5000>, <&macaddr_art_0 10>;
nvmem-cell-names = "pre-calibration", "mac-address";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "winbond,w25q128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
};
partition@10000 {
label = "art";
reg = <0x010000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
precal_art_5000: pre-calibration@5000 {
reg = <0x5000 0x2f20>;
};
};
};
partition@20000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x020000 0xfd0000>;
};
partition@ff0000 {
label = "nvram";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&wdt {
status = "disabled";
};
&wmac {
status = "okay";
nvmem-cells = <&cal_art_1000>, <&macaddr_art_0 2>;
nvmem-cell-names = "calibration", "mac-address";
};