Initial commit

target/linux/ath79/dts/qca9531_glinet_gl-s200.dtsi

@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+	compatible = "glinet,gl-s200", "qca,qca9531";
+	model = "GL.iNet GL-S200";
+
+	aliases {
+		label-mac-device = &eth0;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&jtag_disable_pins>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			linux,input-type = <EV_KEY>;
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		switch {
+			label = "switch";
+			linux,code = <KEY_SETUP>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue_led {
+			label = "gl-s200:blue";
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		white_led {
+			label = "gl-s200:white";
+			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		orange_led {
+			label = "gl-s200:orange";
+			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		gpio_zigbee_reset {
+			gpio-export,name = "gpio1";
+			gpio-export,output = <1>;
+			gpio-export,direction_may_change;
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		gpio_zwave_reset {
+			gpio-export,name = "gpio2";
+			gpio-export,output = <1>;
+			gpio-export,direction_may_change;
+			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		gpio_zigbee_upgrade {
+			gpio-export,name = "gpio11";
+			gpio-export,output = <1>;
+			gpio-export,direction_may_change;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		gpio_zwave_upgrade {
+			gpio-export,name = "gpio17";
+			gpio-export,output = <1>;
+			gpio-export,direction_may_change;
+			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+		};
+	 };
+};
+
+&gpio {
+	gpio-line-names =
+		"","reset-zigbee","reset-zwave","reset",
+		"LED-orange","","","","","","",
+		"upgrade-zigbee","LED-white","LED-blue",
+		"switch","","","upgrade-zwave";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&uart {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		nor_partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+			};
+
+			partition@50000 {
+				label = "art";
+				reg = <0x050000 0x010000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_wan_lan: macaddr@0 {
+						compatible = "mac-base";
+						reg = <0x0 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+
+					calibration_art_1000: calibration@1000 {
+						reg = <0x1000 0x440>;
+					};
+				};
+			};
+		};
+	};
+
+	flash_nand: flash@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+		status = "disabled";
+		
+		nand_partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nand_ubi: partition@0 {
+				label = "ubi";
+				reg = <0x000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy4>;
+
+	nvmem-cells = <&macaddr_wan_lan 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&eth1 {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_wan_lan 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	status = "okay";
+
+	nvmem-cells = <&calibration_art_1000>;
+	nvmem-cell-names = "calibration";
+};