Initial commit

target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts

@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "joyit,jt-or750i", "qca,qca9531";
+	model = "Joy-IT JT-OR750i";
+
+	aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_red;
+		label-mac-device = &eth0;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&jtag_disable_pins &pinmux_led_eth_pins>;
+
+		led_status_green: status_green {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led_status_red: status_red {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinmux {
+	pinmux_led_eth_pins: pinmux_led_eth_pins {
+		pinctrl-single,bits = \
+			/* GPIO 4: LED_LINK_5 (WAN) */     \
+			<0x04 0x0000002d 0x000000ff>,      \
+			/* GPIO 14: LED_LINK_2 (LAN 3) */  \
+			/* GPIO 15: LED_LINK_3 (LAN 2) */  \
+			<0x0c 0x2b2a0000 0xffff0000>,      \
+			/* GPIO 16: LED_LINK_4 (LAN 1) */  \
+			<0x10 0x0000002c 0x000000ff>;
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "firmware";
+				reg = <0x50000 0xfa0000>;
+				compatible = "denx,uimage";
+			};
+
+			art: partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_art_0: macaddr@0 {
+						reg = <0x0 0x6>;
+					};
+
+					macaddr_art_6: macaddr@6 {
+						reg = <0x6 0x6>;
+					};
+
+					cal_art_1000: calibration@1000 {
+						reg = <0x1000 0x440>;
+					};
+
+					cal_art_5000: calibration@5000 {
+						reg = <0x5000 0x844>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy4>;
+
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&eth1 {
+	nvmem-cells = <&macaddr_art_6>;
+	nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+	status = "okay";
+
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&cal_art_5000>;
+		nvmem-cell-names = "calibration";
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	nvmem-cells = <&cal_art_1000>;
+	nvmem-cell-names = "calibration";
+};