Initial commit

target/linux/ath79/dts/qca9533_kuwfi_c910.dts

@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "kuwfi,c910", "qca,qca9533";
+	model = "KuWFi C910";
+
+	aliases {
+		label-mac-device = &eth1;
+		led-boot = &internet_red;
+		led-failsafe = &internet_red;
+		led-upgrade = &internet_red;
+	};
+
+	virtual_flash {
+		compatible = "mtd-concat";
+		devices = <&fwconcat0 &fwconcat1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x0>;
+				label = "firmware";
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		internet_blue {
+			label = "blue:internet";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "white:wifi";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		internet_green {
+			label = "green:internet";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		lan2 {
+			label = "white:lan2";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		// gpio 12 enables or disables LTE (Quectel EC200T)
+
+		internet_red: internet_red {
+			label = "red:internet";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		lan1 {
+			label = "white:lan1";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "u-boot-env";
+				reg = <0x020000 0x010000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x030000 0x020000>;
+				read-only;
+			};
+
+			fwconcat0: partition@50000 {
+				label = "fwconcat0";
+				reg = <0x050000 0xe30000>;
+			};
+
+			partition@e80000 {
+				label = "loader";
+				reg = <0xe80000 0x10000>;
+			};
+
+			fwconcat1: partition@e90000 {
+				label = "fwconcat1";
+				reg = <0xe90000 0x160000>;
+			};
+
+			partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					calibration_art_1000: macaddr@1000 {
+						reg = <0x1000 0x440>;
+					};
+
+					macaddr_art_1002: macaddr@1002 {
+						compatible = "mac-base";
+						reg = <0x1002 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy0>;
+
+	nvmem-cells = <&macaddr_art_1002 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&eth1 {
+	phy-handle = <&swphy4>;
+
+	nvmem-cells = <&macaddr_art_1002 0>;
+	nvmem-cell-names = "mac-address";
+
+	gmac-config {
+		device = <&gmac>;
+		switch-phy-swap = <1>;
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	nvmem-cells = <&calibration_art_1000>;
+	nvmem-cell-names = "calibration";
+};