Initial commit

target/linux/ath79/dts/qca9556_avm_fritz1750e.dts

@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/leds/common.h>
+
+#include "qca9556_avm_fritz-repeater.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "avm,fritz1750e", "qca,qca9556";
+	model = "AVM FRITZ!WLAN Repeater 1750E";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	led_spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+
+		spi_gpio: led_gpio@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			registers-number = <1>;
+			spi-max-frequency = <10000000>;
+
+			gpio_latch_bit {
+				gpio-hog;
+				gpios = <7 GPIO_ACTIVE_HIGH>;
+				output-high;
+				line-name = "gpio-latch-bit";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		rssi0 {
+			label = "green:rssi0";
+			gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		rssi1 {
+			label = "green:rssi1";
+			gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		rssi2 {
+			label = "green:rssi2";
+			gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		rssi3 {
+			label = "green:rssi3";
+			gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		rssi4 {
+			label = "green:rssi4";
+			gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&cal_urlader_198a>;
+		nvmem-cell-names = "calibration";
+	};
+};
+
+&phy0 {
+	reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+};
+
+&gpio {
+	reset-pcie-ep {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE EP reset";
+	};
+
+	reset-pcie {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE Bus reset";
+	};
+};