Initial commit

target/linux/bcm53xx/base-files/etc/board.d/01_leds

@@ -0,0 +1,27 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+meraki,mx64|\
+meraki,mx64-a0)
+	ucidef_set_led_netdev "wan" "WAN Port" "green:activity-9" "wan"
+	ucidef_set_led_netdev "lan1" "LAN Port 1" "green:activity-1" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN Port 2" "green:activity-3" "lan2"
+	ucidef_set_led_netdev "lan3" "LAN Port 3" "green:activity-5" "lan3"
+	ucidef_set_led_netdev "lan4" "LAN Port 4" "green:activity-7" "lan4"
+	;;
+meraki,mx65)
+	ucidef_set_led_netdev "wan1" "WAN Port 1" "green:activity-1" "wan1"
+	ucidef_set_led_netdev "wan2" "WAN Port 2" "green:activity-3" "wan2"
+	;;
+netgear,r8000)
+	ucidef_set_led_usbport "usb2" "USB 2.0" "bcm53xx:white:usb2" "usb1-port2" "usb2-port2"
+	ucidef_set_led_usbport "usb3" "USB 3.0" "bcm53xx:white:usb3" "usb1-port1" "usb2-port1" "usb4-port1"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/bcm53xx/base-files/etc/board.d/02_network

@@ -0,0 +1,103 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+bcm53xx_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	asus,rt-ac87u)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		;;
+	asus,rt-ac88u)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 extsw" "wan"
+		;;
+	dlink,dwl-8610ap)
+		ucidef_set_interface_lan "eth0 eth1" "dhcp"
+		;;
+	linksys,panamera)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan"
+		;;
+	luxul,xap-1610-v1)
+		ucidef_set_interface_lan "poe lan" "dhcp"
+		;;
+	meraki,mr26 | \
+	meraki,mr32)
+		ucidef_set_interface_lan "poe" "dhcp"
+		;;
+	meraki,mx64 | \
+	meraki,mx64-a0)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	meraki,mx65)
+		ucidef_set_interfaces_lan_wan \
+			"lan3 lan4 lan5 lan6 lan7 lan8 lan9 lan10 lan11 lan12" "wan1 wan2"
+		;;
+	phicomm,k3)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		;;
+	*)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	esac
+}
+
+bcm53xx_setup_macs()
+{
+	local board="$1"
+
+	wan_macaddr="$(nvram get wan_hwaddr)"
+
+	case "$board" in
+	asus,rt-ac87u)
+		etXmacaddr=$(nvram get et1macaddr)
+		offset=1
+		;;
+	dlink,dir-885l | \
+	linksys,ea9200 | \
+	linksys,panamera | \
+	netgear,r7900 | \
+	netgear,r8000 | \
+	netgear,r8500)
+		etXmacaddr=$(nvram get et2macaddr)
+		offset=1
+		;;
+	luxul,xwr-3100-v1 | \
+	luxul,xwr-3150-v1)
+		etXmacaddr=$(nvram get et0macaddr)
+		offset=5
+		;;
+	meraki,mr26)
+		label_mac="$(mtd_get_mac_binary_ubi board-config 0x66)"
+		ucidef_set_interface_macaddr "lan" "$label_mac"
+		ucidef_set_label_macaddr "$label_mac"
+		;;
+	meraki,mx64 | \
+	meraki,mx64-a0 | \
+	meraki,mx65)
+		etXmacaddr=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
+		offset=1
+		;;
+	*)
+		etXmacaddr=$(nvram get et0macaddr)
+		offset=1
+		;;
+	esac
+
+	# If WAN MAC isn't explicitly set, calculate it using base MAC as reference.
+	[ -z "$wan_macaddr" -a -n "$etXmacaddr" ] && wan_macaddr=$(macaddr_add "$etXmacaddr" $offset)
+
+	[ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr "wan" "$wan_macaddr"
+}
+
+board_config_update
+board=$(board_name)
+bcm53xx_setup_interfaces "$board"
+bcm53xx_setup_macs "$board"
+board_config_flush
+
+exit 0

target/linux/bcm53xx/base-files/etc/diag.sh

@@ -0,0 +1,42 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+
+get_status_led() {
+	local status_led_file
+
+	# There may be more than one color of power LED, try to avoid amber/red
+	status_led_file=$(find /sys/class/leds/ -name "*:power" -a ! -name "*:amber:*" -a ! -name "*:red:*" | head -n1)
+	if [ -d "$status_led_file" ]; then
+		status_led=$(basename $status_led_file)
+		return
+	fi;
+
+	# Now just pick any power LED
+	status_led_file=$(find /sys/class/leds/ -name "*:power" | head -n1)
+	if [ -d "$status_led_file" ]; then
+		status_led=$(basename $status_led_file)
+		return
+	fi;
+}
+
+set_state() {
+	get_status_led
+
+	[ -z "$status_led" ] && return
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}

target/linux/bcm53xx/base-files/etc/hotplug.d/ieee80211/10-fix-mac-address

@@ -0,0 +1,18 @@
+#!/bin/ash
+
+[ "$ACTION" = "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$board" in
+meraki,mr26)
+	macaddr_add "$(macaddr_setbit_la $(mtd_get_mac_binary_ubi 'board-config' 0x66))" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
+	;;
+esac

target/linux/bcm53xx/base-files/etc/uci-defaults/03_dsa_migrate

@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# Exit if network doesn't contain any swconfig section
+uci -q get network.@switch[0] > /dev/null || exit 0
+
+lan_proto="$(uci -q get network.lan.proto)"
+lan_ipaddr="$(uci -q get network.lan.ipaddr)"
+lan_netmask="$(uci -q get network.lan.netmask)"
+wan_proto="$(uci -q get network.wan.proto)"
+wan_ipaddr="$(uci -q get network.wan.ipaddr)"
+wan_netmask="$(uci -q get network.wan.netmask)"
+
+rm /etc/config/network
+config_generate
+
+uci -q batch <<-EOF
+	set network.lan.proto="$lan_proto"
+	set network.lan.ipaddr="$lan_ipaddr"
+	set network.lan.netmask="$lan_netmask"
+	set network.wan.proto="$wan_proto"
+	set network.wan.ipaddr="$wan_ipaddr"
+	set network.wan.netmask="$wan_netmask"
+EOF

target/linux/bcm53xx/base-files/etc/uci-defaults/05_packet_steering

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+uci set network.@globals[0].packet_steering="1"

target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc

@@ -0,0 +1,23 @@
+. /lib/functions.sh
+
+board=$(board_name)
+
+kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"\(kernel\|linux\)".*/\1/p' /proc/mtd)
+
+fixtrx() {
+	mtd ${kernel_size:+-c 0x$kernel_size} fixtrx firmware && exit 0
+}
+
+fixseama() {
+	mtd ${kernel_size:+-c 0x$kernel_size} fixseama firmware && exit 0
+}
+
+case "$board" in
+dlink,dir-885l | \
+dlink,dir-890l)
+	fixseama
+	;;
+*)
+	fixtrx
+	;;
+esac