Initial commit

target/linux/mxs/Makefile

@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2013-2014 OpenWrt.org
+
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=mxs
+BOARDNAME:=Freescale i.MX23/i.MX28
+FEATURES:=ext4 rtc usb gpio
+CPU_TYPE:=arm926ej-s
+SUBTARGETS:=generic
+
+KERNEL_PATCHVER:=6.6
+
+KERNELNAME:=zImage dtbs
+
+define Target/Description
+	Support for Freescale i.MX23/i.MX28 boards
+endef
+
+include $(INCLUDE_DIR)/target.mk
+
+$(eval $(call BuildTarget))

target/linux/mxs/base-files/etc/board.d/02_network

@@ -0,0 +1,17 @@
+# Copyright (C) 2013-2015 OpenWrt.org
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+*)
+	ucidef_set_interface_lan 'eth0'
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/mxs/base-files/etc/diag.sh

@@ -0,0 +1,38 @@
+#!/bin/sh
+# Copyright (C) 2013-2014 OpenWrt.org
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+get_status_led() {
+	case $(board_name) in
+	i2se,duckbill*)
+		status_led="duckbill:green:status"
+		;;
+	olimex,imx23-olinuxino)
+		status_led="green"
+		;;
+	*)
+		status_led=$(cd /sys/class/leds && ls -1d *:status 2> /dev/null | head -n 1)
+		;;
+	esac
+}
+
+set_state() {
+	get_status_led
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}

target/linux/mxs/base-files/etc/inittab

@@ -0,0 +1,4 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+::askconsole:/usr/libexec/login.sh
+ttyGS0::askfirst:/usr/libexec/login.sh

target/linux/mxs/config-6.6

@@ -0,0 +1,271 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_CPU_AUTO=y
+# CONFIG_ARCH_MULTI_V4 is not set
+# CONFIG_ARCH_MULTI_V4T is not set
+CONFIG_ARCH_MULTI_V4_V5=y
+CONFIG_ARCH_MULTI_V5=y
+CONFIG_ARCH_MXS=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_HAS_GROUP_RELOCS=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_PM=y
+CONFIG_BUFFER_HEAD=y
+CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_COREDUMP=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_ARM926T=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MITIGATIONS=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC16=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DEV_MXS_DCP=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_GF128MUL=y
+CONFIG_CRYPTO_LIB_SHA1=y
+CONFIG_CRYPTO_LIB_UTILS=y
+CONFIG_DEBUG_ALIGN_RODATA=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DTC=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EXCLUSIVE_SYSTEM_RAM=y
+CONFIG_EXT4_FS=y
+CONFIG_EXTCON=y
+CONFIG_FEC=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FORCE_NR_CPUS=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FUNCTION_ALIGNMENT=0
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+# CONFIG_GIANFAR is not set
+CONFIG_GLOB=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_MXS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCA=y
+CONFIG_I2C_ALGOPCF=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_MXS=y
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_KFIFO_BUF=y
+CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_IIO_TRIGGER=y
+# CONFIG_IIO_TRIGGERED_BUFFER is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQSTACKS=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MXS=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISDN is not set
+CONFIG_JBD2=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_MXS_LRADC=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_MXS=y
+CONFIG_MMU_LAZY_TLB_REFCOUNT=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MXS_DMA=y
+# CONFIG_MXS_LRADC_ADC is not set
+CONFIG_MXS_TIMER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_EGRESS=y
+CONFIG_NET_INGRESS=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_XGRESS=y
+CONFIG_NLS=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_LAYOUTS=y
+CONFIG_NVMEM_MXS_OCOTP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PAGE_POOL=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLIB_LEDS=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX23=y
+CONFIG_PINCTRL_IMX28=y
+CONFIG_PINCTRL_MXS=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PREEMPT_NONE_BUILD=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_RANDSTRUCT_NONE=y
+CONFIG_RATIONAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STMP=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_MXS_AUART=y
+CONFIG_SERIAL_MXS_AUART_CONSOLE=y
+CONFIG_SMSC_PHY=y
+CONFIG_SOC_BUS=y
+CONFIG_SOC_IMX23=y
+CONFIG_SOC_IMX28=y
+CONFIG_SOFTIRQ_ON_OWN_STACK=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MXS=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
+CONFIG_STMP3XXX_RTC_WATCHDOG=y
+CONFIG_STMP_DEVICE=y
+CONFIG_SWPHY=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_IMX=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_OTG=y
+CONFIG_USB_PHY=y
+CONFIG_USB_ROLE_SWITCH=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ULPI_BUS=y
+CONFIG_USE_OF=y
+# CONFIG_VFP is not set
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0

target/linux/mxs/generic/target.mk

@@ -0,0 +1 @@
+BOARDNAME:=Generic

target/linux/mxs/image/Config.in

@@ -0,0 +1,8 @@
+config MXS_SD_BOOT_PARTSIZE
+	int "Boot (SD Card) filesystem partition size (in MB)"
+	depends on TARGET_mxs
+	default 8
+	help
+	    On the Olimex OLinuXino boards, mainline U-Boot loads the
+	    linux kernel and device tree file from a FAT partition.
+	    The default value of 8 MB should be more than adequate.

target/linux/mxs/image/Makefile

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2013-2015 OpenWrt.org
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+FAT32_BLOCK_SIZE=1024
+FAT32_BLOCKS=$(shell echo $$(($(CONFIG_MXS_SD_BOOT_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
+
+KERNEL_LOADADDR:=0x40008000
+
+define Build/mxs-sdcard-ext4-ext4
+	./gen_sdcard_ext4_ext4.sh \
+		$@ \
+		$(STAGING_DIR_IMAGE)/$(DEVICE_NAME)/u-boot.sb \
+		$(IMAGE_ROOTFS) \
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE)
+endef
+
+define Build/mxs-sdcard-vfat-ext4
+	rm -f $@.boot
+	mkfs.fat $@.boot -C $(FAT32_BLOCKS)
+
+	mcopy -i $@.boot $(DTS_DIR)/$(DEVICE_DTS).dtb ::$(DEVICE_DTS).dtb
+	mcopy -i $@.boot $(IMAGE_KERNEL) ::uImage
+
+	./gen_sdcard_vfat_ext4.sh \
+		$@ \
+		$(STAGING_DIR_IMAGE)/$(DEVICE_NAME)/u-boot.sb \
+		$@.boot \
+		$(IMAGE_ROOTFS) \
+		$(CONFIG_MXS_SD_BOOT_PARTSIZE) \
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE)
+endef
+
+define Device/Default
+  PROFILES := Default
+  KERNEL_NAME := zImage
+  KERNEL := kernel-bin | uImage none
+  IMAGES := sdcard.img.gz
+  DTS_DIR := $(DTS_DIR)/nxp/mxs
+  DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
+endef
+
+define Device/i2se_duckbill
+  DEVICE_VENDOR := I2SE
+  DEVICE_MODEL := Duckbill
+  DEVICE_PACKAGES := -dnsmasq -ppp -ip6tables -iptables -mtd \
+		     uboot-envtools kmod-leds-gpio -kmod-nf-nathelper
+  SUPPORTED_DEVICES:=i2se,duckbill
+  SOC:=imx28
+  DEVICE_DTS:=imx28-duckbill
+  IMAGE/sdcard.img.gz = mxs-sdcard-ext4-ext4 | append-metadata | gzip
+endef
+TARGET_DEVICES += i2se_duckbill
+
+define Device/olinuxino_maxi
+  DEVICE_VENDOR := Olimex
+  DEVICE_MODEL := OLinuXino Maxi
+  DEVICE_PACKAGES := kmod-usb-net-smsc95xx kmod-pinctrl-mcp23s08-i2c \
+		     kmod-pinctrl-mcp23s08-spi kmod-leds-gpio kmod-sound-core
+  SUPPORTED_DEVICES:=olimex,imx23-olinuxino
+  SOC:=imx23
+  DEVICE_DTS:=imx23-olinuxino
+  IMAGE/sdcard.img.gz = mxs-sdcard-vfat-ext4 | append-metadata | gzip
+endef
+TARGET_DEVICES += olinuxino_maxi
+
+define Device/olinuxino_micro
+  DEVICE_VENDOR := Olimex
+  DEVICE_MODEL := OLinuXino Micro
+  DEVICE_PACKAGES := kmod-pinctrl-mcp23s08-spi kmod-pinctrl-mcp23s08-i2c \
+		     kmod-leds-gpio
+  SUPPORTED_DEVICES:=olimex,imx23-olinuxino
+  SOC:=imx23
+  DEVICE_DTS:=imx23-olinuxino
+  IMAGE/sdcard.img.gz = mxs-sdcard-vfat-ext4 | append-metadata | gzip
+endef
+TARGET_DEVICES += olinuxino_micro
+
+$(eval $(call BuildImage))

target/linux/mxs/image/gen_sdcard_ext4_ext4.sh

@@ -0,0 +1,30 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2015 OpenWrt.org
+
+set -x
+[ $# -eq 4 ] || {
+    echo "SYNTAX: $0 <file> <u-boot.sb image> <rootfs image> <rootfs size>"
+    exit 1
+}
+
+OUTPUT="$1"
+UBOOT="$2"
+ROOTFS="$3"
+ROOTFSSIZE="$4"
+
+head=4
+sect=63
+
+# set the Boot stream partition size to 1M
+set $(ptgen -o $OUTPUT -h $head -s $sect -l 1024 -t 53 -p 1M -t 83 -p ${ROOTFSSIZE}M -t 83 -p ${ROOTFSSIZE}M)
+
+ROOTFS1OFFSET="$(($3 / 512))"
+ROOTFS1SIZE="$(($4 / 512))"
+ROOTFS2OFFSET="$(($5 / 512))"
+ROOTFS2SIZE="$(($6 / 512))"
+
+dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFS1OFFSET" conv=notrunc
+dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFS2OFFSET" conv=notrunc
+sdimage -d "$OUTPUT" -f "$UBOOT"

target/linux/mxs/image/gen_sdcard_vfat_ext4.sh

@@ -0,0 +1,34 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2015 OpenWrt.org
+
+set -x
+[ $# -eq 6 ] || {
+    echo "SYNTAX: $0 <file> <u-boot.sb image> <bootfs image> <rootfs image> <bootfs size> <rootfs size>"
+    exit 1
+}
+
+OUTPUT="$1"
+UBOOT="$2"
+BOOTFS="$3"
+ROOTFS="$4"
+BOOTFSSIZE="$5"
+ROOTFSSIZE="$6"
+
+head=4
+sect=63
+
+# Set the u-boot storage to 2M
+set $(ptgen -o $OUTPUT -h $head -s $sect -l 1024 -t 53 -p 2M -t c -p ${BOOTFSSIZE}M -t 83 -p ${ROOTFSSIZE}M)
+
+UBOOTOFFSET="$(($1 / 512))"
+UBOOTSIZE="$(($2 / 512))"
+BOOTOFFSET="$(($3 / 512))"
+BOOTSIZE="$(($4 / 512))"
+ROOTFSOFFSET="$(($5 / 512))"
+ROOTFSSIZE="$(($6 / 512))"
+
+dd bs=512 if="$BOOTFS" of="$OUTPUT" seek="$BOOTOFFSET" conv=notrunc
+dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFSOFFSET" conv=notrunc
+sdimage -d "$OUTPUT" -f "$UBOOT"